Help!Full Qwerty Keyboard Missing. Only Numbers Keyboard! - Touch HD General

Hi everyone...
I need advice on how to resolve this problem. When i select full qwerty keyboard option, the keyboard with ABC missing, only the numbers keyboard appears.
I read somewhere that people mentioned to deactivate T9 and problem will solved. I tried but nothing happen, problem still exits. I also tried soft reset a few times, problem is still there.
My HD is running on WM 6.5, is there a bug that causes this? I tried to select other keyboard, such as phone keypad and compact qwerty, nothing happen, still the same numbers keyboard appears.
Anyone please help...desperate here...
Thanks so much

did you install HD tweak and enable T9? if yes, then disable, soft-reset and that should correct the problem.

cortez.i said:
did you install HD tweak and enable T9? if yes, then disable, soft-reset and that should correct the problem.
Click to expand...
Click to collapse
Hi brother cortez, thanks for your reply. I have not install tweak. I did try to disable T9 and soft reset, but it couldn't help.
I did a hard reset at last. But it happens again. I just found out that it is the problem with a program called ZTA4 which is a IME i installed for chinese input. I uninstall this software and the issue to missing keyboard will be solved. I then re-install the program again. Not sure if this is the right way to do it, but it solves the missing keyboard issue.

Related

TouchPal wont show after a while

Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
iv got version 3.5 aswel, iv had no problems with it
the only problem i have is that, in landscape mode the key sizes dont increase, it appears small, but never the less a great keyboard
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
gt112 said:
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
Click to expand...
Click to collapse
just tried that, no problem what so ever
try this
uninstall, soft reset, install, soft reset, then go to settings, inputs, choose touchpal as default keyboard, then press ok, then soft reset
i know thats long but it should do the trick, seems to me as if that it wasnt installed correctly and theres some errors, so try what i said and let me know if it works
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
gt112 said:
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
Click to expand...
Click to collapse
just the thread, i guess your right, your not alone...but..its still wierd as iv been using touchpal since last wednesday and its still working fine for me
could it be that touchpal is conflicting with another keyboard on the device?
Have you gone to settings/inputs and selected touchpal as the keyboard?
I cant think of any other ideas because its working perfectly for me
Thanks xdaman
Just done a new re-install and it seems ok now. TBH I am now using the version from Cooltek so I may have had myself to blame.
On another note, I am having probs setting custom commands, I have the followig questions, can anyone offer any wisdom ?
You can setup custom commands such as Ctrl+z etc. They can be stored in place holders accessed by tab+downslide on the Control Tab button (the one with the 4 arrows). The instructions for creating custom command scan be found in the manual (section 4.2) here
Here are my questions
1. How do you create a combination command? e.g. They have a built in command called "Select All && Copy". This is 2 commands. How do you create this ?
2. After I mess up all my command buttons. How do I reset them to their defaults ?
3. When I create a command, Is Flag5 the ASCII key code? The manual is not specific on this. Also, if Flag5 is the ASCII code, why do I need to then enter the Alphabet index of the letter ?
4. I only seem to be able to edit the top Custom command button. If I try and assign values to the lower buttons, the edit appears in the top button. Is this a bug ?
cant install/wont install
downloaded the cab file..after it ran..it looks like explorer window pops up and tried to o something..anyway it says the page cant be found..tried loading in both card and local and get the same response..it does tell me the it was unsuccessful in loading
i gues its the lastest becuase i downloaded from the site
gt112 said:
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
Click to expand...
Click to collapse

Having problems selecting QWERTY keyboard.

Hi!
I received a Touch HD few days ago and from the first time I noticed that something doesn’t works properly.
Initially the keyboard by default was the QWERTY one. I changed it to probe the compact one. I did the change with no problems (obviously was not a difficult issue). Well not so obviously because the problem was when I tried to return to full QWERTY keyboard.
I selected the fullQWERTY in the configuration menu, I pushed the OK button but when I tried to write a new message the compact keyboard was still there. I tried to change to any other keyboard but the result was the same. I haven’t installed any keyboard so is not a software incompatibility issue.
I reset the phone, check for rom updates, etc but I cannot select QWERTY keyboard. I have search about this but the only information I found is a post in this forum with no answer.
Please, any information about a possible solution will be greatly appreciated. Just imagine a wonderful HD without its QWERTY keyboard…
Thank you very much.
I have the same issue. A full reset did fix it but then it randomly happened again. Obviously that's not ideal!
Any ideas anyone?
Might it be worth an email to htc?
You checked for ROM updates using? I'm sure there is some registry key but not really certain.
Regards,
Carty..
I have encounter the same issue. I have found out that if you go through setting and select keyboard to change..it will not work...
It seems that touchflo took over the registry.....
Now the correct way to change your keyboard is to
1. press your keypad up.
2. you should see this little arrow beside the your keypad icon
3. when you tap the arrow you will see this menu pop up to pick the keyboard layout.
This is the ONLY WAY to change the keypad
Hope this helps
JuanQ said:
Hi!
I received a Touch HD few days ago and from the first time I noticed that something doesn’t works properly.
Initially the keyboard by default was the QWERTY one. I changed it to probe the compact one. I did the change with no problems (obviously was not a difficult issue). Well not so obviously because the problem was when I tried to return to full QWERTY keyboard.
I selected the fullQWERTY in the configuration menu, I pushed the OK button but when I tried to write a new message the compact keyboard was still there. I tried to change to any other keyboard but the result was the same. I haven’t installed any keyboard so is not a software incompatibility issue.
I reset the phone, check for rom updates, etc but I cannot select QWERTY keyboard. I have search about this but the only information I found is a post in this forum with no answer.
Please, any information about a possible solution will be greatly appreciated. Just imagine a wonderful HD without its QWERTY keyboard…
Thank you very much.
Click to expand...
Click to collapse

Kyboard problem - Help please!

Hello,
I installed TouchPal keyboard but I could never get it working. I would change the input setting to TouchPal but it always loaded the default keyboard. I have now got a problem where I only can type numbers out, no matter what input method I select.
If I press 'ABC' it will type a '1' instead, and so on. I Googled and found out that others have had this problem as well, and it has been fixed by uninstalling TouchPal, which I have now done, but the problem still exists.
What can I do?
Thanks
EDIT:
Nevermind, I did a few more soft resets and it appears to be back to normal now. I guess I'll just stick with the default keyboard!

Full QWERTY Keyboard Problem

For some reason my 'Full QWERTY Keyboard' defaults to the numeric/symbol keys (normally accessed by pressing '123').
Pressing ABC to try and switch to letter keys has no effect at all.
Anyone seen this or have any ideas how I can fix it ?
thanks
Do you have PocketCM Keyboard installed? If yes uninstall it, both SIP conflict.
I haven't installed any other keyboards, are there any settings I can check. I have tweaked a few things with Tweak HD and am wondering if that has affected this somehow.
Can I re-install the HTC Keyboard ? Was going to try and find the install CAB by extracting the ROM in ROM Kitchen, not really sure where to look tho.
Have you enabled T9 in HD Tweak? That seems to be a common problem with that setting....
Ah yes I did do that, so to fix do I just turn it off again in Tweak HD ?
Just tried it and yes it has fixed the problem.
Thank you
macdat said:
Ah yes I did do that, so to fix do I just turn it off again in Tweak HD ?
Click to expand...
Click to collapse
Yep.....give it a try - should solve your problem.....

HD - Full QWERTY keyboard stuck on numbers.

Hi,
Just yesterday I have noticed a very strange issue. The full qwerty keyboard is permanently stuckup on number keypad which is visible when we press 123.
Any (desperate) attempts to press ABC to get the alphanumeric keyboard back just doesnt work. I tried several ways but its just not working.
I really do not want to do a hard reset for this issue. Is there any registry key that I maybe able to alter.
I dont know the source of this issue but my wild guess is it might have happened after I installed cab to skin the stock calculator.
Any help will be appreciated.
araje said:
Hi,
Just yesterday I have noticed a very strange issue. The full qwerty keyboard is permanently stuckup on number keypad which is visible when we press 123.
Any (desperate) attempts to press ABC to get the alphanumeric keyboard back just doesnt work. I tried several ways but its just not working.
I really do not want to do a hard reset for this issue. Is there any registry key that I maybe able to alter.
I dont know the source of this issue but my wild guess is it might have happened after I installed cab to skin the stock calculator.
Any help will be appreciated.
Click to expand...
Click to collapse
i posted a query about this yesterday as well as i had the same problem. search for keyboard stuck on symbols. i fixed it by leaving the battery out overnight, 60 seconds didnt seem to work, but im looking for a better fix or better a prevention. btw i didnt install any cab for the calculator
araje said:
Hi,
Just yesterday I have noticed a very strange issue. The full qwerty keyboard is permanently stuckup on number keypad which is visible when we press 123.
Any (desperate) attempts to press ABC to get the alphanumeric keyboard back just doesnt work. I tried several ways but its just not working.
I really do not want to do a hard reset for this issue. Is there any registry key that I maybe able to alter.
I dont know the source of this issue but my wild guess is it might have happened after I installed cab to skin the stock calculator.
Any help will be appreciated.
Click to expand...
Click to collapse
try change the input method to something else, then switch back (to full qwerty) to see if it defaults back to the qwerty
buggybug0 said:
try change the input method to something else, then switch back (to full qwerty) to see if it defaults back to the qwerty
Click to expand...
Click to collapse
Already tried this. Doesnt seem to work.
Frustrating ain't it?
Read post #4 here,
http://forum.xda-developers.com/showpost.php?p=3140507&postcount=4
Fixed it for me.
gadgetuk you are a life saver.
Thanks so much. It worked like a charm
very interesting,looks like lots of people are having the same problem on the same date , I have the same problem too,lucky I search here before I do a hard reset , Thanks to
"flogger
Junior Member
Join Date: Jan 2009
Posts: 1
I had the same problem when I installed HD Tweak, it started happening.
I disabled the T9 only in HD Tweak, Shut down the phone, start it again and it went back to normal. No tricky stuff. At least it worked for me."
Worked for me too. Thanks.
T9 only in HD Tweak? Where is that... I looked on options about T9 and disabled it, no go... is there something else I am looking for?
Fix for Full Qwerty Keyboard Stuck On Numbers
This happened to me sometime after I performed this reghack to change word completion behavior:
IMPORTANT: be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e0010409
* Value of Ime File from \windows\xt9ime.dll to \windows\compime.dll
* Value of Layout Text from XT9 IME to COMP IME
To fix it, I used a registry editor to revert back to XT9 settings, soft reset, verified normal Full Qwerty Keyboard functionality returned, then switched back to COMP settings by performing the above reghack again, soft reset, and now I have the auto-completion scheme I prefer and the Full Qwerty is back.
Hope this helps!
Solution found, thread closed

Categories

Resources