Database Users

PLEASE help me... i'm desperate!!

Hi...
I upgraded my qtek 9100 from OS version 1.6.7.1 to cingular 1.8.11.1
The problem is that now, the phone doesn't start... the splashscreen appeears, along with... IPL 2.17
SPL 2.21
GSM 02.07.10
OS 1.8.11.1
But doesn't get out from there...
Did a do anything wrong?
PLEASE help me?
Is there any solution or is it bye bye qtek?

maybe you flashed broken or wrong rom.
start your device in bootloader mode (look in wiki how to do this) and then reflash again and if this does not work, get rom from your provider and reflash with this.

...
But my pda starts and it stays in splashscreen... is it repareble anyway?

Yes it should be fixable
Cant understand why you would want a old cingular rom (the cingular is not exactly same hardware as your phone wiza200 vc wiza100!)
You should download an aku2 rom here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
user name xda password xda
Next get into the bootloader screen - turn device off and start with camera button pressed - should be a multicolor screen
Next attach device to pc via usb cable
Flash with above rom and all should be well

After upgrare Stucked at boot screen

Artemis and PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
i tried to upgrade my o2 arte200,i waited 30min. but installation frozen.
i did reset but after reset my phone stucked at bootscreen
IPL : 1.25.0001
SPL: 1.25.0000
GSM : 02.67.90
OS : 1.28.0.0
Please help... i tried hard reset and soft reset ... but no way...
when i plug usb cable activeSync dont recognise phone

same problem here,
help needed in advance

Active sync is usable only with Windows booted device. If Windows isn't able to boot, you must enter into bootloader, plug usb cable and then start rom flashing.

hi sir
i entered bootloader screen,connected usb cable ... (i can connect using mtty)
i run the software "CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE"
but gets an error message " cant connect to the phone"
WHY ???

finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????

CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
is a Rom for the Wizard not for the Artemis.
You need the original ROM so you have to search for the O2 ARTE200 ROM. The language of the ROM has to be correct as well.

how do you get the phone into the bootloader?

Tha said:
how do you get the phone into the bootloader?
Click to expand...
Click to collapse
Press and hold the record button and then do a reset.

no it doesn't work
My DOPOD was in the same trouble. I got the same vender ID error. Does anyone know where to get the original DOPOD P800 chinese ROM?

The same problem has I also.
My ROM upgrade ended bad. Test of installing of different ( I have already them probably 12) the INVALID ends VENDOR ID
I it can not now to remove CID nor to find out what it has it CID HTC__001 does not it fit. T - MOB 005 does not it fit.
I look for original romu from Dngaard ( DK)
Someone knows what CID maybe it is in HTC 3300. I have HTC P3300 is distributed would to Dangaard.
Where from him download
I greet
Irek ( POLAND)

im having the same problem on the o2 orbit ( need a orignal rom

upgrading
hai i am stuck in o2 orbit flashing in bootloader mode
help needed urgent

i got it working after i found the original german rom...loaded the orbit into the bootloader screen with 3 colors....plugged in the usb cable..then ran the german rom, after a few mins it reset and the orbit loaded up...after that i followed these steps to get it into english
http://forum.xda-developers.com/showthread.php?t=290241
flashed it with the tmobileuk 1.13 shipped file. everything is ok now.

cbprod said:
i got it working after i found the original german rom....
Click to expand...
Click to collapse
Where do you find the orginal rom?
Please help us!

send me a pm with your email, i'll send it to you

got mine back from the repair center friday.
no cost at all, fixed

route said:
finally i did connection ...
but goes %3 and gives error message
ERROR 294 INVALID VENDER ID
this update utility cannot be used for your PDA Phone.Please check your update utility ??????
Click to expand...
Click to collapse
could you tell me how did you manage to conect your phone? i have the same problem and i can't get my palm recognized by windows...

you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).

xister said:
you must go into the bootloader.
i´ve found the orginal o2 rom and now it´s working fine with wm5.
i wait for the o2 official wm6 update (i read something about may).
Click to expand...
Click to collapse
is that the o2 UK rom or the German one

Black Out? Qtek S100

Hi,
Il from Belgium. SORRY FOR MY BAD ENGLISH
I have a Qtek S100
R 1.01.00
G 133.38
D 1.03.02 FRE ( French i think )
I tryd to change my Extended Rom from French to Dutch or English... with some file i dont know... im new it this stuff and i F**kt it up!!!
My Qtek just goene black and on the screen u can see USB 1.0.0
After open the baterycover and plug in back the qtek starts BUT after starting install the original app. it goes back to thr BLACK screen and nothing happens.
If I plug in the USB and connect it with my pc, it comes on the screen USB 1.0.0 ....
SO PLA HELP ME PLS!!!
I tryd hard / soft reset, NOTHING!
I look at XDA alredy 4 days everyday 4-6 hours I tryd SO MUCH, I take a day off work, so to can fix it!
IM GOIN CRAZY PEOPLE!!! PLS PLS HELP ME!

Best thing to do is go to bootloader mode and installing a new flash.
Bootloader mode can be found on the forum, but to help you out:
press simultaniously: camera button + power + soft reset (last one with the stylus)
Then start the rom update on your pc (do not use this from vista it wont work (or you have to find the fix online..)
Easiest way is to flash from windows xp works like a charm.

I have the same problem than rocky_gent but I can get the bootloader mode
i'm stack in bootloader mode ! And when i connect the usb cable doesn't display the "USB" but insists with "Serial V1.00".
I want to upgrade my rom from a secure digital (sd) cause i don't have another choice!
I 've been surfing through forums but i only found how to make an sd to upgrade your phone when you have an mda or xda (.nb1 files) . Qtek's roms have .nbf files !!! So i'm looking instructions to make an upgrade sd card with .nbf files (Qtek , Htc Magician) and not .nb1 (Xda)!!
http://forum.xda-developers.com/attachment.php?attachmentid=24569&d=1127232848

?
where can i get new flash? and yes im with vista, why it wount work???

asking about,use the power from the USB port to charge the XDA

help me to break & solve this problem, maybe can also help the other members..
I tried to upgrade my XDA to WM2003SE everything goes right,
bootloader first time i still use v5.22
but when I soft reboot it freezes on the OZUP screen and
message ONLY FOR MICROSOFT bla bla bla....
i get this ROM from http://www.romkitchen.de/ ==> WM2003SE
then downgrade bootloader from v5.22 to v5.15,
using MMC (flash SD) continue to special rom 1.2,
and then cooked again using PC2002 by my own creation based from
romkitchen, what i want to ask is :
i cannot connect again via dekstop activesyn if i want to change
my ROM because my cradle cannot detect my charger?? but if i charge
directly, its work. What is the problem?
is my cradle/dekstop broken at the charger socket?
so what i need to do? just change the wire or socket or
i use the step like at http://wiki.xda-developers.com/index.php?pagename=WallabyCradleMod
if i prefer use the 2nd method, is that really OK? so just used cradle/deskstop, no need
power charger again if i want to change ROM to WM2003SE, because only can use via activesync?
after i change bootloader to v5.15, keep trying to change but only can via Flash SD Card,
i change to WM 2003 final, still same problem....after finish, only screen cannot enter the
menu or else, only boot screen until i am waiting for 15 minutes??? then change again to
WM2003 but using from http://www.romkitchen.de/tools, still same again....boot screen again...
haiyaaaa.....what happen?? i dont know, tired, always overtime to do this,hehehhee...
all my friends, help me...need your advice ^_^V
*now, i still used ROM from PC 2002,cooked again using PC2002 by my own creation based from romkitchen.
bootloader v5.15
Microsoft Pocket PC --> PC2002
Version 3.0.12039 (Build 11178)
ROM version : 3.17.03 ENG
ROM date : 05/15/03
Radio version : 6.24.00
Protocol version : 324e4
Model No.: PW10A1

I can not really help you, but i was also in the same situation, that i have had a device, that doesn´t work with any other ROM than PPC2002
Flashed several WM2003 ans the WM2003SE but non of them worked.
So i rest at PPC2002
Stefan

ow ow...
auch.. ok, thanks for the comment, i give-up,hehehe..but only for now,
take a rest first but i dont know for t'mrow, actually from 10 flashed,
i got 1 success, can got WM2003SE but with almost empty battery,
i know the inside and already set all, including i notice bluetooth icon,hehehe..
but how? i wonder that my sx56 with fake bluetooth, only icon
but after i charge my sx56 then i soft reset, its gone, back again with only boot-screen, after that, i can't find again WM2003SE ROM only lock with boot-screen, and ONLY FOR MICROSOFT..blablabla...
and about for my cradle/dekstop? how is it? can u give me solution to fixed it??
btw,thanks for helping, tips & trick hehehe...
i will keep trying to find/solved this problem by my own way ^_^V

modify my cradle/dekstop success
its working, i try to modify my cradle/dekstop with that steps (look at the top this thread), and it's work...actually not me who did it, but my friend,hehehehe....i ask his help and he agrre to doit, but all the risk is still at me, now i can charge and also syncronized to my notebook

3 colors at boot but that all

Hi,
I can install few rom :
- Prophet_ShadoW_2.0_CE
- Prophet_ShadoW_1.0
- PROPHET_DIAMOND_WM61_20226_SB
- RUU_Prophet_220734_2207114_024721_QtekWWE_Ship
It's install at 100% but my s200 stay 3 colors at boot.
My fone is dead ? Or i forgot anything ?
Thank.

Try to install the original rom of qtek s200 ( use wiki htc) , and them do a Hard spl if the phone still in BL mode.

3 clour boot screen
Download aku 2.2 for 3g if your phone is 3g
disable the usb connectivity in active sync
then run the aku programme connecting the usb cable
then your phone should be OK

try flashing the NVID rom,it fixes problems, here is the link
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs