I have a parrot bluetooth car kit. Every time I turn the car off I get a message that I lost the connection with my headset and that I have to keep my telephone to my ear.
I don't want this message anymore. Is there a way to set this off.
Yes!
http://forum.xda-developers.com/showpost.php?p=3933326&postcount=1
Gordon
Related
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
approx 4minutes or less
I was having a problem w/mda and bluetooth and sometimes without bluetooth, in that the entire network would just drop when the call gets close to 4 minutes.... I called tmo about it and they simply gave up and said maybe its the phone...so they sent me a replacement mda, used it today during one call and couldn't believe that the call lasted longer than an hour...
Mine is only with bluetooth. I guess a little more info is needed. If I hit the voice dial button on my car kit I get the voice command tone. I have also used bluetooth to play music over the car kit with the voice command controls(just for fun, horrible quality). It will disconnect while it's playing music no call involved. I have a feeling it's the bluetooth connection timing out but I'm not sure. It's frustrating.
so its not happening during phone calls???
see there might be a bluetooth timeout that tmo doesn't know about...I have to use bluetooth and it seems like every 4min or less it blanks out everything and sometimes I even have to re pair the two devices.... I would try making calls and using the bluetooth w/o car kit...mine did some of the samethings like streaming music thru bt headseat and it would blankout with that also even when not on a call..
Car Kit Not Staying Paired???
I guess I wasn't clear. It happens in both situations. I think i have to re-pair after as well. As far as I know it doesn't stay paired. When a call comes in I usually have to wait about 2 rings before it rings through the car kit. Also when I make a call by hitting the voice dial button on the car kit the blue light blinks for about 2 seconds then I get the voice command sound. I assume that the blinking is it re-pairing. I guess I need info on how to keep it paired.
Anyone? I have found that time dosen't seem to be a issue as it has done it a 1min 43 seconds and 2 mins 38 seconds.
GreggSymington said:
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
Click to expand...
Click to collapse
Try turning on the bluetooth first while your phone is off. Once the bluetooth is on, then turn on your cell phone. I tried many times in frustration why it is saying "phone is disconnected" looking for problems. Then it works now and even the phone book in my Nokia and Garmin GPS. Hope it helps you too.
Turn on bluetooth device first while the cell phone is off. Once bluetooth is on, then turn on the latter. Hope it works. Do it everytime you use bluetooth device in your car.
Not sure if it's the phone or the car but here goes....
I have a Cingular 8525/HTC TyTn with the jetware bluetooth software to allow the battery and signal to show on the HandsFreeLink on my 2005 Acura TL.
When the car is off, and I am home, if I go out to the garage and try to make a phone call near the car, it is connected to BT and I have to wait for the call to go through, hit menu and disable handsfree in the phone.
Also, when I answer calls, the HFL beeps at me twice, the answer beep and end beep, but the call connects fine.
Thirdly, the phone and car will randomly disconnect mid call and I will have to dig my phone out from the holster as the call is transferred from the car to the handset. Afterwards, the car will not recognize the phone, and I have to shut the car off and restart it for the phone to be recognized.
Any suggestions?
Thanks,
John
bump....please? Anyone?
if your phone connects to the BT carkit even though the car is off, it sounds as wiring problems in carkit, should have an ignition sense that switches the thing off, when car is not in use....the repairing problem confirms this...try an autoelectrician or qualified installer....
well, it's factory installed in all acuras, never had a problem like this with my razr, only this phone....
Being trying for the last few hours to pair with the car kit, the phone discovers the car......the car asks for a code..1234.. which I enter and push OK, the phones says pairing for a couple of minutes and then "cannot connect" at one stage it said "paired not connected" and I had to remove the battery to clear it.
Also when/if I can pair it how do I get it to remain visible so it will automatically connect.
Keith
hmmmmm.... not a nissan car kit, but i do have BT in my car, and it was so easy to pair and use.
i set my phone to be discoveable and let the car find the phone
then when they connected i entered the pass code 1234 (default on most car decks) and it was successful
then i was able to play music via BT A2DP and also call/receive calls in my car
the car and the phone both recognise each other but once the code is put in it hangs, II will try again tomorrow
I am having a problem with my car's handsfree and automatic reconnection to my Nexus 4.
My car is paired (and when it is paired I select "Don't ask again" about access to the Address book). However when I return to the car, bluetooth on the phone does not automatically reconnect to the bluetooth handsfree in the car like it did with my previous two phones (SGS2 and SGS3).
I can go into bluetooth settings, and click on the handsfree device and it connects right away and works fine, but I really don't want to do that every time I get in my car.
Does anyone have any suggestions?
Thank you.
bump-- anyone?
My Turbo 2 doesn't auto connect to the two BT audio devices I have (car stereo and motorola buds). It auto-connects to my Pebble fine, but I have to manually connect to the buds and the stereo each time I use them.
I can't seem to find a setting for making them autoconnect, but I could be missing something. Any tricks to get it to auto connect like my old Moto X would?
That happened to me with this phone and my car stereo. What I did to fix it (by accident) was wait until my car stereo was attempting to connect to the bluetooth and then turn the bluetooth on my phone off and then right back on. It connected right away and auto connects whenever I use my car stereo. Give it a shot.
I do know if u don't set as a trusted device it won't auto connect on mine.
pinkfloydviste said:
That happened to me with this phone and my car stereo. What I did to fix it (by accident) was wait until my car stereo was attempting to connect to the bluetooth and then turn the bluetooth on my phone off and then right back on. It connected right away and auto connects whenever I use my car stereo. Give it a shot.
Click to expand...
Click to collapse
I didn't expect that to work, but it did.
:good:
Noticed with Sync (Ford) it sometimes pauses and I have to turn BT off then on.
UPDATE: Turn off all the moto assist stuff, no more problems.