Hi!
i put a new rom 2 days ago onto my phone with wm6.5.
yesterday i lock the screen and now i can not access my phone.
it stucks on the lock screen where i am able to enter the code but not to the home screen anymore.
as it was new rom'ed i didn't plugged in to the active sync
any ideas how to flash the device??
thanks in advance
regards
p.s. nike100 = touch dual, clean rom 6.5.2 [ger]
sorry for u pal.do this.take ur battery out.insert it again.make sure ur batteey is charged fully.now dont switch on the phone.press green & red keeys at the same time and push on the power button.do then what comes on the screen.this will hard reset ur cell.
alll d best.
Related
I Have an orange branded touch dual, its unmodified in any way, i installed the spb mobile shell version 2.1 to the fone memory, i was playin arround with the tabs on the home screen trying to put my orange options in one of the tabs, i was given a warning that it wasnt compatible wiv this software but i acciently selected ok!!
now when i boot my fone up it boots to the home screen n then freezes the screen or the buttons wont work so im unable to navigate to the hard reset option, i tried to connect to active synk to flash a new rom but it connect 4 a second then disconnects
does anyone have any ideas how i can solve this problem or is my fone bricked? your help would me much apreciated
Solved !!!!!
Wooooooohoooooo av sorted it i found a thread at http://forum.xda-developers.com/showthread.php?t=415049 that told me how to hard reset it
Hello there magicians.
My poor Artemis is in trouble.
After an upgrade to a new rom (Artemis touch 4.02) and when everything went perfecty well, I tried to put greek in it. After reseting the device starts but stucks in the screen before opening WM 6.1
HELP!!!
How to enter it in bootloader?
shut down ur phone by removing the battery then again put in the battery then press the record button and the power button together u will see the red blue screen this is boot loader mode flash it with official factory rom this is important and dont forget to remove ur sim and memory card before flashing
Thanxxxxxxxxxx
A lot
And now what I ll do about greek keyboard?
Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!
Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
rupesh baviskar said:
Hi
Plssssss Help me. i'm using HTC touch 3450 and i have upgraded my device with wm6.1
NOW THE PROBLEM IS...
1. MY DEVICE BUTTONS(HARD KEYS) NOT WORKING BUT I CAN MAKE THE DEVICE IN BOOTLOADER (TRICOLOR) MODE BY PRESSING CAMERA + POWER BUTTON.
2. AFTER INSTALLING A ROM WHENEVER MY DEVICE STARTS IT SHOWS THE HARD RESET SCREEN (BLACK SCREEN........... ALL THE DATA ...BLAH BLAB......)
I HAVE TO REMOVE THE BATTERY AND START THE DEVICE AFTER 30 MINS.) PLEASE NEED THE SOLUTION ......
3. I AM TRAYING THIS FOR A MONTH BUT NOTHING HAPPENS
PLZ GUYS HELP MEEEEEEEEEEEE OTHERWISE I'LL BE CRAZY!!!!!
Click to expand...
Click to collapse
hi
if u can get ur tricolor screen then try this
connect the usb cable to pc and see if u get the USB words on the phone tricolor screen if so good try flashing any official ROM the same happened to my phone long back did the above got my phone back asuming u have done HSPL for ur phone if u have not done that then the only way is to take it to service
hope it helps good luck
thanks
hari
Wrong forum.. Touch P3450 is not a touch 3g , its the original touch (ELF version)
but i will try and help as i have owned both.
if your hardware buttons are not working it could be possible that your send and end keys are stuck down as this key combo brings up the hard reset you are talking about.
think you are going to have to open it as it sounds like a hardware fault, and if you cannot get into bootloader you cannot flash
if it was working alright before this is not the case, but either way you will have to fix your camera button and get into bootloader
i have hp ipaq6828 phone... so i did flash it with new rom after complete full install my device came to black screen.. i was try to get turn on it again.. but it cant... its nw charging.. charge light is work fine... but no more power on or no more boot loader screen & hp logo screen... so how can i ge bootloader sccreen again??? or hw can i fix my devicce... please help... i love my phone & i dont have enought my to buy new one....
dulands said:
i have hp ipaq6828 phone... so i did flash it with new rom after complete full install my device came to black screen.. i was try to get turn on it again.. but it cant... its nw charging.. charge light is work fine... but no more power on or no more boot loader screen & hp logo screen... so how can i ge bootloader sccreen again??? or hw can i fix my devicce... please help... i love my phone & i dont have enought my to buy new one....
Click to expand...
Click to collapse
after you have fully charged your phone, try flashing it again...Happy New Year.
tnx.... but how cant flash it again... becuze its doesnt start to bootloader... i cant it power on.. plz help me... hw do i flash it????
you try to flash WM5 rom and then flash the rom. offline flash memory card.
dulands said:
i have hp ipaq6828 phone... so i did flash it with new rom after complete full install my device came to black screen.. i was try to get turn on it again.. but it cant... its nw charging.. charge light is work fine... but no more power on or no more boot loader screen & hp logo screen... so how can i ge bootloader sccreen again??? or hw can i fix my devicce... please help... i love my phone & i dont have enought my to buy new one....
Click to expand...
Click to collapse
try to Hard Reset your device , here the way to do that...
Perform a hard reset with the iPAQ. To perform a hard reset,
1. Press and hold the Answer/Send, Power, and End Call buttons.
2. While holding these buttons, use the stylus to lightly press the Reset button on the bottom (located at lower left base of the iPAQ), of the HP iPAQ until the device restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button. The HP iPAQ restarts and powers on.
CAUTION: A Hard reset clears memory, deletes all data (such as owner information under Setup Wizard and AutoConfigurator) and restores the rw6818/rw6828 to its default factory settings. The action will erase all data that you have created and programs you have installed, but will keep all the preinstalled programs that were in the phone when your phone was first delivered to you. Be sure you have backed up all your data in a mini SD card or on your PC before performing a hard reset