Hello guys
I cant pass the password screen on my niki. I cant type my password everything i press or either the numbers on the screen it gets no response... and the phone beeps, as it writes on the password the letters A and S without i pressed it. so i got a lot of As and Ss and even the ! on the box of the password and can´t go further.
Even in bootloader i can go. My screen gets black and no connection is detected in windows.
I tried Hard Reset, but i can´t press enter(the keyboard is turned off) neither the central button.
What should i do?
Thanks.
Related
Every time an event occur on my device, like incomming SMS or so, the screen is enabled and the button lock is turned off. I want the device to play the sound but not unlock the screen and hardware buttons.
Has anyone developed a program that can run in the background and take care of this? I'm sick and tired of taking the phone out of my pocket and ten programs are running and using battery!
Sitting in classroom......recieve SMS (i forgot to turn volume down)........embarrassed....thinking.....I'll read it later.....ten seconds later.... my favorite song is all over the room.....thanks to my windows media player shortcut on the today screen...
Øystein
something like this? not sure if it'll solve your prob but give it a go...
oops; silly me i forgot to include how the bloody thing works 8)
--------------------------
ScreenLock is a very small and handy tool to turn off a PPC's display, and lock all the hardware keys, including power button. It'll keep your PPC alive even without any program running. It'll help you to save battery power while streaming or downloading big files, or playing music.
To turn on the display and release the lock, just press on the left most hardware button (first button) and the right most hardware button (forth button) simultaneously. Only these two buttons are pressed down together can unlock your PPC.
I can't unlock the screen.....The left most hardwarebutton must be the Startmenu button... and the rightmost must be the OK button.....?
Help i can't unlock my IIs screen at all i have tried most combinations i think, anyone know what it is???????? :shock:
Answer ricmo2004 about u can't unlock
I can't remember all buttons but i know how to unlock it.
On top of your xda u can see 2 buttons right?
top right is one of unlock key.
And under your screen u'll see 4 buttons
It's the second fronm the left it should b messege i think.
Press these two together ...........
It'll unlock your phone
ok guys, it works this way:
think
in settings disable default "button lock"
to unlock use record+calendar hardware buttons pressed simultaneously.
buzz
... as it was not designed for pda phones, it doesnt lock green and red buttons. this is good and bad. good is that you can pick and hang up phonecalls. bad is, that you don't see who is calling, and when phone buttons are pressed, screen is flashing very funny way.
I've found the perfect application that locks my device! 1-pass from Omega One! It does exactly what I want
Follow this link
t0flus
1-pass does not pass!
i've been looking for a similar app for ages so downloaded the trial of 1-pass.
After 15 minutes of trying to get it to work I've given up and uninstalled it. Problems I encountered were:-
1) tapping my soft key password did not unlock the machine, it just sat on the 1-pass security screen (there is no enter key to tap after entering the soft key password).
2) activesync claimed the password was incorrect and refused to connect.
I changed password several times, studied the help file and the support web pages but found nothing to help.
Maybe I was missing something, but if I have to spend more than 10 minutes and 3 resets to get something working on my xda II then its not worth keeping it in my opinion.
Maybe I was missing something, but if I have to spend more than 10 minutes and 3 resets to get something working on my xda II then its not worth keeping it in my opinion
Click to expand...
Click to collapse
I'm not sure, but I think you don't have to enter the password. You can just assign the password to the button combination.
According to the help, to enable activesync to connect, you must enter the soft key password. Also I don't remember seeing the option of not assigning a soft key password in settings.
Re: 1-pass does not pass!
cojones said:
i've been looking for a similar app for ages so downloaded the trial of 1-pass.
After 15 minutes of trying to get it to work I've given up and uninstalled it. Problems I encountered were:-
1) tapping my soft key password did not unlock the machine, it just sat on the 1-pass security screen (there is no enter key to tap after entering the soft key password).
2) activesync claimed the password was incorrect and refused to connect.
I changed password several times, studied the help file and the support web pages but found nothing to help.
Maybe I was missing something, but if I have to spend more than 10 minutes and 3 resets to get something working on my xda II then its not worth keeping it in my opinion.
Click to expand...
Click to collapse
GREETINGS!
It is worth keeping in, if you get it right.
After first installation you get the screen like " Wecome to 1-pass....." wherein you had to feed the hard keys password. The next is "Retype hardware key Password.....", then comes the"Enter backup password", retype it and comes the screen "Thank You the password have been successfully changed. I think this can be done by going to >Start>settings>1-Pass, and then change password.
If the password is not accepted then, any of the two will let u enter the setting.
As far as active synch is concerned, it only accept your backup, softkey password.
Regards,
Dr. Kushal
How can I view my screen on my laptop now that my screen is dead? Anything that involves tapping buttons on my Hermes would be difficult, but I still have access via activesync...
Try http://www.mymobiler.com/
Good luck!
Thanks, I'll give it a go.
I installed it but I can't tell what's happening on my mobile now. I tried to hard reset because it was making all these alert noises when it booted up, but it didn't work... now Activesync won't connect and gets stuck on 'retrieving settings'. The phone just beeps one alert beep when it boots up, I've tried typing my password in but that doesn't do anything... I'm a bit stuck
I'd like to be able to hard reset it, but I don't know if I can do this without entering my password first. When I push down the 2 soft keys and push the reset hole I should then be able to press 'r' on the keyboard for a hard reset, but that doesn't seem to work, so is there any other way of hard resetting, am I doing something wrong?
Hello
I have two little issues I can't find soultion to..
1. My device boots, htc logo appears and then keypad shows up to enter the SIM PIN...but it closes before I input so I have to manually turn off the airplane mode and then turn cellular on...
Is there a way to fix this?
2. The topright corner cross (or sometimes even the OK) should be white (if clickable) but sometimes it is grey..is this normal or I have something bad going on...it works, it is just annoying that sometimes it is gray sometimes white...
If someone knows how to fix these two please let me know...thank you very much...
if only these two issues was the only ones....
Concerning the pin code screen that disappear, instead of put your phone on plane mode, you can just click the call button : it will display the pin code screen again.
ow..thanks you..I will try that one..
and regarding the issues...luckilly I dont have many...
1. This seems to be TF3D - when the phone re-starts from reset it wants the SIM code. But, TF3D starts as well and then takes over the screen. Any use of the phone now will give the SIM code screen. So, the other advice is good: hit the call button. I normally just wait for TF3D to do it's start-up and I normally get automatically the SIM code input screen.
2. I use http://soft.photoracer.net/docs/wktask_en.html as a replacement for the OK button. But before I never had the grey OK button. Try exploring the OK button options in start - system - task manager - button
thanks for your help....
ow and btw I hate touchflo
i have standart homescreen customized
If you don't need the security provided, why not turn off the SIM pin entry?
hey guys i have searched but not found anything about this.
when i switch my touch hd on and it asks for my pin i enter it and then nothing happens it sort of freezes and just says waiting.. only emergency calls can be made without a pin.
its happened to me loads and i have to do a hard reset for it to work again after it.
please help me
Mine tends to stick on the PIN screen but 99% of time it will work if I don't start to input the PIN until waiting for a few seconds (the top bar is at first green like the WM loading screen, then goes black as TF3D starts to load behind I guess).. fustrating!
This has happened to me once, since then I always wait 3-5 seconds before entering the pin.
Hello,
These last days I had a lot of problems to align the screen of my Samsung Omni Addict player I900. The problem is that the touch screen is not centered anymore and it does not react when I press something on the screen.
To solve the problem I wanted to make a hard reset by using the following key combination "*2767*3855#".
My biggest problem is that, by mistake, I did lock the screen and keys of the phone and then when I press any key, my phone ask me to press the "Unlock" option on the screen, but I cannot do it as the touch screen does not react correctly.
I'm wondering if there is any possibility to edit the register to be able to unlock it.
Any other ideas are welcome. I'm blocked on this problem for two days now
Thanks in advance for your help,
Alain
Maybe I'm missing something but... can't you just soft reset it? I don't think it will boot up screen-locked....
Soft reset didn't help but after multiple tries I managed to do an hard reset which did solve the problem.
The problem I'm facing to now is that I cannot align the screen. As recommanded in different posts in this forum I have changed the CalibrationData value in the registery but still, after following the "align screen" procedure the screen does not react correctly. To be able to move forward I would like to be able to activate the mouse cursor. Do you know how could I activate it by changing a value in the registery?
If not I will create a new post with this question.
Thanks in advance.
Alain.
I'm sorry, haven't had an i900 in my hands for a while now, I don't remember which reg key you need