Hello
I have two little issues I can't find soultion to..
1. My device boots, htc logo appears and then keypad shows up to enter the SIM PIN...but it closes before I input so I have to manually turn off the airplane mode and then turn cellular on...
Is there a way to fix this?
2. The topright corner cross (or sometimes even the OK) should be white (if clickable) but sometimes it is grey..is this normal or I have something bad going on...it works, it is just annoying that sometimes it is gray sometimes white...
If someone knows how to fix these two please let me know...thank you very much...
if only these two issues was the only ones....
Concerning the pin code screen that disappear, instead of put your phone on plane mode, you can just click the call button : it will display the pin code screen again.
ow..thanks you..I will try that one..
and regarding the issues...luckilly I dont have many...
1. This seems to be TF3D - when the phone re-starts from reset it wants the SIM code. But, TF3D starts as well and then takes over the screen. Any use of the phone now will give the SIM code screen. So, the other advice is good: hit the call button. I normally just wait for TF3D to do it's start-up and I normally get automatically the SIM code input screen.
2. I use http://soft.photoracer.net/docs/wktask_en.html as a replacement for the OK button. But before I never had the grey OK button. Try exploring the OK button options in start - system - task manager - button
thanks for your help....
ow and btw I hate touchflo
i have standart homescreen customized
If you don't need the security provided, why not turn off the SIM pin entry?
Related
Anyone have a solution for this? I have my Wizard go to standby after a short time and always make sure it is in standby when I put in in my case. However, when I receive a call and pull it out of the case, I almost always press one of the buttons. So when I answer the phone I have the camera going, contacts open or the connection manager open. I use all the buttons so I don't want to disable them completly. I wash there was a way to disable all buttons except the answer button for like 5 seconds after a call starts ringing. Or, be able to set buttons to not activate unless pressed for 2 seconds or so. Or, require 2 presses to activate. Anyone have any ideas?
Thanks
Turn on the password (4 digit one is fine) and set to 0 minutes, the phone will "lock" as soon as you go into standby but when it rings you will be able to answer with the red/green buttons but nothing else until you put in your password.
Thanks, I will give that a try. I used a password before but it slowed things down so much that I removed it. I have done quite a bit of optimizing since then and will try it once more.
it does slow the use, and gets annoying (i still use it) but it does work until i find a decent app to do it. All it really needs is 2 touches or 2 buttons to unlock but not found anything yet... \
I have solved this with litle less work .I have Device lock Bar on the top, under date , so you need twice down and middle buton to lock the
device.
device lock doesn't seem to play well with the password application. if you have password activated you can do a device lock but when you put your device on standby and bring it to full power it is unlocked. if you use device lock without password it works.
any solution to lock keyboard during a call ? i always active some functions with my ears(...) when i speak
starseb - switch your phone to stand-by mode... the radio (phone part) should remain on, and you can continue calling. Then just switch it back on when done ( or not %) )
sorry for my english, but i make i make a mistake. i would say how to lock screen during a call.
bostjan said:
I have solved this with litle less work .I have Device lock Bar on the top, under date , so you need twice down and middle buton to lock the
device.
Click to expand...
Click to collapse
Is there a good way to unlock by pressing just keys?
Try christoph's deltaLock map it to a hw button then set it to be unlocked by the same hw button.
Anybody know if there's a way of keeping my Trinity in standby even when a text message comes through - I keep the thing in my pocket and if I don't look at it straight away after a text has come through, all kind of things happen - programs get launched, photos get taken, voice memos are created, just from it moving around in my pocket after un-standbying itself!??
Thanks
Lock the screen and when a text comes no programs will launch!
Nope...
Doesn't work...as soon as a text comes through, everything unlocks - is there anyway to stop this from automatically happening?
Thanks
flight mode
tjw2007 said:
Doesn't work...as soon as a text comes through, everything unlocks - is there anyway to stop this from automatically happening?
Thanks
Click to expand...
Click to collapse
Not so on mine when it is locked it stayes locked! The screen will come on but the machine stays locked.
What mine is doing is when a text comes through, it seems to be causing the device to unlock, because the screen will take touch commands - I need to be able to lock the screen and get it to stay locked even when a text comes through. Any experts out there who might know how to achieve this?
Thanks
What is flight mode anyway?
OK, let me put this another way - is it possible to lock the screen until you press the standby button, so that nothing else unlocks it such as a text message or phonecall?
Thanks
I don't have this problem. My screen is set to go off after 1 minute. When the phone is in standby, all I get is a tone and the orange light flashes. The screen will not come on, unless I press the power button.
No input is accepted when in standby by the screen or any button except the power button - check your settings
I also have it set to auto-lock after 2 hours, so even if I get a text, and turn the screen on, then i need to put the password in before the screen unlocks
i use my m700 the same as you with no problems
RESOLVED!
Managed to put the device lock option on the 'Today' screen and this keeps the whole device locked (screen & all) no matter what happens, until you press the unlock option on the screen. Hooray!
After i hang up on a call (when the phone is in sleep mode and the screen is locked) the screen unlocks. this is quite contrary to what is mentioned in the phone manual chapter 1 page 45. this becomes an issue since i use a bluetooth headset and the phone remains in its sleeve/case and after every call, a whole bunch of applications will launch since the case is in contact with the screen. have i overlooked some settings or are there other owners who have faced this issue?
ideas and suggestions welcomed
did you check it out if any of the hardware buttons being pressed against the case hence wakening up the phone.?
i had it to only closed al my apps in taskm and it stoped flickering
My HD2 is also behaving in the same way even in controlled test conditions - the phone unlocks when a call comes in (I'm presented with slide to accept or reject call) The phone unlocks during the call, but fails to lock again on disconnect (either by pressing "end call" or hang up via bluetooth).
Can anyone verify this? Is it interacting with something I installed?
I believe I found a (complicated) workaround.
What I want: leave HD2 inside pocket, answer calls with bluetooth headset, hang up and phone will go back to lock.
Problem: After I hang up using bluetooth or press the big red "End Call" button or the other party hangs up, the phone stays unlocked! It stays powered on and all kinds of buttons gets clicked.
Practically all lock sw uses their own lock screen (which I don't want to install). CSDevCtrl does not trigger by phone. TouchLockPro uses its own transparent lock screen but can respond to phone events. Using the !SUSPEND for TAPI\Ended under settings does not seem to work when the screen dims about 50 secs into the call.
Solution: Use TouchLockPro together with LockAndOff. Get TAPI\Ended to run LockAndOff will turn phone off, whether by bluetooth, big red "End Call" button, or the other party hangs up.
BTW: I think there is some confusion on whether the phone locks when you
1. press the big red "End Call" button, or
2. the hard "End call" button
in the forums.
I noticed that HD2 have a light sensor next to the top ear speaker.
During a call, if the phone is put near the ear and cover the light sensor , the screen become non-active which is good.
If anyone can come up with a lock sceen using this light sensor , then the problem with random launch of program when phone inside pocket will be solved.
This lock screen should only activated right after an end of call, beacuse , sometime you may want to use the phone in a dark place.
linivan said:
I noticed that HD2 have a light sensor next to the top ear speaker.
During a call, if the phone is put near the ear and cover the light sensor , the screen become non-active which is good.
If anyone can come up with a lock sceen using this light sensor , then the problem with random launch of program when phone inside pocket will be solved.
This lock screen should only activated right after an end of call, beacuse , sometime you may want to use the phone in a dark place.
Click to expand...
Click to collapse
It's the proximity sensor that turns the screen on and off during a call, not the light sensor. How else would it work in the dark? (which it does)
johncmolyneux said:
It's the proximity sensor that turns the screen on and off during a call, not the light sensor. How else would it work in the dark? (which it does)
Click to expand...
Click to collapse
My proximity sensor does not work, when I am getting a call my screen turn off and when I am taking the phone out from my face it turn on only when I am out side at the sun!! the screen stay off when I am inside room. I tested it with flsh light and it is working also.
I have a T-Mobile US version of the HD2. I am having the same problem when using the bluetooth system in my car. After answering or making a call the phone stay unlocked. And then starts making random calls while I am driving!!!!
There has got to be an easy fix for this!!!
Buy pocketshield, problem solved.
i have this unlock problem with 1.48 rom and i solve it by pressing start button and lock. after that everything works fine unless i change theme in settings. then just repeat first step.
Solved
Same trouble with me until I use the following software. I tried it and it's almost perfect. unzip it and just copy to your HD2, run CallerLoc.exe and click Yes, you'll find:when you hang up, or he/she hang up a call, or a call is established, the screen will turn off.
Why say 'almost perfect', the software is in chinese, but the filename is in english. and it's a call location software but with the function we need.
To stop or before you delete the software, run Callerloc.exe and click Yes again.
Hope this will help you. Sorry I don't find a English version of this software. I esure and I'm using this software perfectlly with my Leo.
theciscokid said:
Buy pocketshield, problem solved.
Click to expand...
Click to collapse
Same for me
Greetings.
I understand this is quite an old thread I'm digging up but I need a little help as well and I didn't want to start a new topic just for that.
I've this silly problem, appeared right out of the blue:
You all know the standard manila behavior, when the phone is idle, the screen first dims and after some more time, depending on your preferences, the screen locks. It also locks if you press the power off button. This all was happening to me till this morning.
I added an event in the calendar (the only change I made today) and after that, my phone dims and then goes in sleep mode after the designated period of time, but DOESN'T lock!!! It doesn't even lock when I press the power off button. I can still lock it by pressing Start and then lock or by press and hold the power button and choose the lock phone option. So one would say that it's still operational, so why bother about it, but I kinda liked the standard function and I have to freaking idea why it changed!!!
I'd be most appreciative if you could offer some help with that.
Oh, I forgot to mention. Soft reset didn't solve the problem. Erasing the calendar event didn't either.
My phone runs the factory ROM (1.66.482.1 ELL), I haven't changed anything other than user settings (yeah, I'm a noob... )
Thanks in advance!
Nasos
Pocketshield could be the end of your problems. You can try it for 10 days and see how it goes...
But why do I need to buy third party software in order to revert my phone to it's original operation?
No, this is not the answer I am looking for. I was wondering if you know of any kind of settings that might have changed by accident and caused this undesired behavior.
Thanks.
The best to return to normal operation would be a hard reset. Or you can spend a while trying.
You can try
HKLM\Software\Microsoft\Shell\Lockscreen\Enable=1
HKLM\Software\Microsoft\Shell\Lockscreen\Active=1
Thank you very much. I opted for the hard reset option... I hope it stays ok this time!
My HD2 also had some strange unlocking and unwanted calling.
I noticed it appeared when using the android style lockscreen.
When I changed back to the original one, problem solved
i had this too. the andriod lockscreen seems to be a bit buggy last time i used it, i accidentially called 7 random numbers
On the Blackstone, when calling, the phone keypad screen is disappearing relatively quickly replaced by black screen once you get connected and if you need to dial later some additional codes on the keypad you have to activate the screen pushing the upper on off button....
How is it possible to play with this delay in view to keep the phone keypad visible much longer ?
Thx for any clues
adgort said:
On the Blackstone, when calling, the phone keypad screen is disappearing relatively quickly replaced by black screen once you get connected and if you need to dial later some additional codes on the keypad you have to activate the screen pushing the upper on off button....
How is it possible to play with this delay in view to keep the phone keypad visible much longer ?
Thx for any clues
Click to expand...
Click to collapse
Did you try messing around the the advanced Config software cause if memory serves me right it's actually a feature which you can disable....
Hope it helps
you could try these any of these two options below, if you want...
1.. HD TWEAK appl. and config....
option 1 and set option 1.1 and 1.2 accordingly...
http://forum.xda-developers.com/showthread.php?t=452505
.. plse,read thread
2 TOUCH IN CALL SCREEN TWEAK.appl..( according to me, better option ).which allows your screen to turn on ,if you lower phone from ear position ,and turn off screen if you bring phone up to ear postion(saves battery power)
http://forum.xda-developers.com/showthread.php?t=488991
... plse,read thread, for better understanding..
good luck
willcor
feel lag on when is unlocking. did any one having a same problem with me??
please delete this post...
The unlock swipe would lag for the following reasons:
1. Your wifi was turned on but is off because of screen being off. You turned on the screen which makes the phone re-enable wifi and connect to a network. This process will lag the swipe animation.
2. You used some kind of app (ie. JuiceDefender) that would disable APN (3G) when your screen is off. Turning the screen on again will make the phone to try to reconnect to 3G and this will also lag the swipe animation.
3. You just turned on your phone and because things are still loading at startup, doing the swipe will lag.
Tip: Try to wait for 5 seconds after turning the screen on and then do the swipe motion. It should go back to normal.
If none of that applies to you, do a factory reset =)
this is my second time to hard reset it but still the same.
I often find that swiping doesn't unlock the phone; the arrow won't go all the way to the edge of the screen (it sometimes just stops halfway). When that happens, I press the power button to lock the screen, then try the process again. 9 times out of 10 it'll work fine the second time.
This happens when the WiFi is off, and I am not using any APN software, nor have I just switched the phone on.
It doesn't really bother me, unless this happens when a call comes in, and I can't answer it! (it often takes me a few swipes to answer a call, and I have to swipe it slowly and carefully)
shanespencer said:
I often find that swiping doesn't unlock the phone; the arrow won't go all the way to the edge of the screen (it sometimes just stops halfway). When that happens, I press the power button to lock the screen, then try the process again. 9 times out of 10 it'll work fine the second time.
This happens when the WiFi is off, and I am not using any APN software, nor have I just switched the phone on.
It doesn't really bother me, unless this happens when a call comes in, and I can't answer it! (it often takes me a few swipes to answer a call, and I have to swipe it slowly and carefully)
Click to expand...
Click to collapse
you might have a problem with your screen where some parts wont respond to your touch
download any drawing programs " i find magic marker " is the best from the market place. its free. and tap dots all over your screen, if there is/ are parts that doesnt response to your tap from the first time, that means u have problem with the screen and its not accepting your touch input. which is why your swipe doesnt go all the way sometimes.
Yes there is lag on the unlock screen. I see it as just bad programming by SE.
-------------------------------------
Sent via the XDA Tapatalk App
My swype keep changing direction, anyone nows how to set it to a particular side?
@mirdones - it changes sides when you start with your finger at the top of the swipe arc and slide your phone across the screen (left to right or right to left)..
@everyone - my swipe unlock occasionally stops about 3 quarters of the way along.. all I do is re-swipe from where it stopped and it's fine - that said, it doesn't happen as much now that I have stopped using task killers and startup auditor.
I find that instead of a slow swipe more of a flick works well for me.
Does anyone know if its possible to disable the se lock and just use the android one?
gavriel18 said:
Does anyone know if its possible to disable the se lock and just use the android one?
Click to expand...
Click to collapse
...would love to know this too