I recently bought a Qtek 9000 second hand. I flashed it a couple of times and all went well untill with the last flash it got stuck in the qtek splash screen showing the name of the rom and other info in red letters. Tried flashing it againt repeatedly but i still have the same problem.
Any help will be greatly appreciated.
Welcome to forums
Try to flash a diferent ROM
and have a deep read in the wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
Thanks i tried flashing with tomal 8.5 ,8.7 and luca15thebig rom.
They installed successfully but im's still stuck in splash screen showing qtek. Did i bricked it for sure?
have you do DOC Format before flashing? if not, try it, hope it solve your problem.
http://wiki.xda-developers.com/index.php?pagename=DOC_Format
and ... you should try to search in this forum with key "stuck in splash screen" too.
Related
Hi,
I was installing the Blackdiamond 2.0 and after a reboot my mda stayed on the boot screen with the version numbers. It's been there for hours and I can't do anything. I tried the hard reset but no luck. How can I get my mda running again?
Thanks
Try flashing in boot-loader mode.There are already quite a few threads on this.Check the Wizard Wiki which has all the information that you need!
After unsuccesfully trying to change my rom my prophet is stuck at the booting screen. Soft reset, hard reset.. Noting works :S
can someone please, please help
Have you made USPL? (Case yes) Was it Ok?
Might you check out this thread here:
xda-developers > Artemis > Artemis upgrading etc.>Orbit Stuck On Booloader
http://forum.xda-developers.com/showthread.php?t=344733
I tried to update to ProphetTouchVIII. First step, using the RUU worked. but after the second step, upgrading the rom to ProphetTouchVIII and hard reboot I got a short message (less than 1 sec) "format FAT partition
Format is completed!!" and now it returned to bootings screen and got stuck there.
I will read the recommended thread but so far I havent found anything helpfull there. The big problem is that my computer wont find the m600 anymore so I cant flash the rom back to a working one, i guess..?
further suggestions are welcome..
I urgently need help with my BA
I attempted to upgrade to Beta version:WM6.1 CEOS 20262.Build 19949 Aku1.2
by sun dream and now its stuck in the bootloader screen, I have gone through the wiki of BA and have done various suggestions on how to hard reset my device but nothing seems to be working. Any help extended will greatly be appreciated. Thanks and More Power to all you guys!
Flash again. If no progress - flash different ROM. Never forget about proper HR after each flash.
hey out there,
i do have some problems with my Blue Angel the last days, i flashed a new rom
1.15.00
1337.45
V.6.01.09 DVH
and had Problems with active sync, seemed like it didn't get an Ip adress.
so i flashed sunwell 6.1 and i was able to synch but radio rom was missing and i wasn't able to do calls at all. Hard/soft resetted reflashed flashed other roms, but now i stuck directly after the Bootloader screen when showing windows mobile 6 logo.
It makes an annoying "Bling" and it's reacting on commands, Stylus or Power button, but i didn't finish starting even after 10 min. I flashed some other roms.
same problem. any suggestions?
sorry for abusing this thread but i didn't wanted to start a new "wuhuhuhuhu i bricked my friends BA" thread.
thanks florian
edit.
if starting now it shows Radio and GSM None
hm...formatted with mtty restarted
put sim inside.
displaying R,G NONE when booting.
soft resetted, displayed right data.
Booted, finally working whyever.
i flashed me wizard with a new rom and it anit my first time and it worked great but just for one day after that day my wizard shut off i tryed to open it but it never prossed after the splash screen so i trid to reat the factory defolt but it says format error so i dicided to flash an new rom thro the bootloder screen coz i thought that i had a rom colabse so i flashed several roms but every time same thing habens the rom is flashed the wizard startas but nothing happen except the sblash screen and it dosn't prossed opning but the splash screen changed but stilll the same os , ipl and spl
plz some body help me plzzzzzzzzzzzz :'(
i-mate k-jam g4
Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!