Related
i tied to flash my herald os original italian with this method with UK OS
http://forum.xda-developers.com/showthread.php?t=290382
but my device dont wont to boot it stay blocked at
IPL 1.08.001
SPL 1.08.001
GSM 02.71.90
OS 1.8.0.0
please help me
can someone upload a shiped rom please italian if posible cause original os was italian
please help
I thought I did not unlock CID before flashing your Herald (it is HTC or Dopod or ???). Until now the best way to rescue it is bringing your PPC to the service.
But before doing this you can do some following action:
- Remove the battery for about 20 min and put it again.
- Hard reset.
its a htc
i will try battery solution and feed back
thanks
Got the same problem
I have the same probleme. is there any solution????????????? please post. mine herald doesn't start up. it get stuck when starting op.
Herald is no dead as the bootloader is still there.U need to flash the original OS by putting Herald into bootloader mode.It will b alive again.
yes but i didn't found the original rom anywere italian rom
and my device still bloked
please can someone upload italian os rom please
hey did you manage? cuz i have the same problem, maybe you can help me out
Hello....another one that need Italian ROM.
P4350 locked at boot....
Bye
chrispazz said:
Hello....another one that need Italian ROM.
P4350 locked at boot....
Bye
Click to expand...
Click to collapse
If italian is not absolutely necessary find an original English rom is simple...
or not?
johnny88 said:
If italian is not absolutely necessary find an original English rom is simple...
or not?
Click to expand...
Click to collapse
NOT, devices mostly get bricked because they are not CID unlocked. So the phone will only allow to flash the ORIGINAL language and ROM version etc.. good luck ya'll, by the way my Herald is dead too, so join the club
there is not a way to edit the image so to keep CID control away?
Is it possible to uncid the phone via USB bootloader mode?
Thanks
Christian
As far as I know (or what the XDA-dev forum can do) there is no utility for Removing and/or replacing the CID lock. There is imei-check.co.uk, but some people are having problems with that prog, and it can only be used when your device has OS running and ActiveSymc is connected, sorry pal
Hi,
I have the same problem than you,
but i have another Herald with the same rom as mine,
Is there any way for me to dump the rom from the first herald
and put it in the second?
Thx for your answers.
Herc.
hi,
I may be found a way to unbrick the herald
but i need to know the right command line to do it
please help.
cf: http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=151&PN=1
where i found the way to unbrick a pda using usb
Bye
Herc.
I think the codes e.g. d2s 80000000 02000000 are indeed only for the XDAII, i think the 80000000 is the location of the image storend on the ROM of the phone, so we need to have the codes for the locations of the images.
But i just thought of the flashing of Herald using the SD card.. I believe it can only flash SIGNED nbh files, but i'm not sure.. Could someone who's a die hard please help out, with this way we could unbrick devices with ROM dumps from someone else
Portuguese ROM of wm5 PLEASE!!
i had bricked my phone too..
there is somebody with portuguese version of WM5 please?
URGENT..
upload it for me please!
thanks
eagler said:
i had bricked my phone too..
there is somebody with portuguese version of WM5 please?
URGENT..
upload it for me please!
thanks
Click to expand...
Click to collapse
We can't just upload a ROM, it is very very hard to find! Try to search for yourself!It took me 3 google and torrent days to find a german ROM (accidentally)
when i was searching for the Dutch ROM. So search search search
The Dutchman said:
I think the codes e.g. d2s 80000000 02000000 are indeed only for the XDAII, i think the 80000000 is the location of the image storend on the ROM of the phone, so we need to have the codes for the locations of the images.
But i just thought of the flashing of Herald using the SD card.. I believe it can only flash SIGNED nbh files, but i'm not sure.. Could someone who's a die hard please help out, with this way we could unbrick devices with ROM dumps from someone else
Click to expand...
Click to collapse
Just for the info: i tried the original nbh from the german RUU to flash my terra from SD card. But no success. Still vender error
The Dutchman said:
I think the codes e.g. d2s 80000000 02000000 are indeed only for the XDAII, i think the 80000000 is the location of the image storend on the ROM of the phone, so we need to have the codes for the locations of the images.
But i just thought of the flashing of Herald using the SD card.. I believe it can only flash SIGNED nbh files, but i'm not sure.. Could someone who's a die hard please help out, with this way we could unbrick devices with ROM dumps from someone else
Click to expand...
Click to collapse
To papamopps: This was an old post, I gave it up long time ago to flash via SD-Card
The Dutchman said:
To papamopps: This was an old post, I gave it up long time ago to flash via SD-Card
Click to expand...
Click to collapse
Yes - But i hoped i could flash mine with the official RUU_sighned.nbh. BUT no chance.
lol
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
O2 Orbit WWE Wm5 factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Help me please
Will foundling oneself such man which advise me with this problem ? whether oneself it will subject ? His HTC has to kill persons how much ? Does someone be able to this repair? How do to repair this ?
My HTC is brick. I it can not flicker rom, I it can not take off CID because I it can not him start. Whether someone can me to help or what I can they would make he he was lively.
I it can not flash rom by bootloader because do not it know from where from him download. It my HTC is from Danngard (Denmark) .
I ask help me. T - Mobile O2 Dopod - ROM do not it fit . INVALID DEVICE ID
Pinesio said:
Will foundling oneself such man which advise me with this problem ? whether oneself it will subject ? His HTC has to kill persons how much ? Does someone be able to this repair? How do to repair this ?
My HTC is brick. I it can not flicker rom, I it can not take off CID because I it can not him start. Whether someone can me to help or what I can they would make he he was lively.
I it can not flash rom by bootloader because do not it know from where from him download. It my HTC is from Danngard (Denmark) .
I ask help me. T - Mobile O2 Dopod - ROM do not it fit . INVALID DEVICE ID
Click to expand...
Click to collapse
You do need the factory rom for your device and then flash it from bootloader mode. Contact the dealer you bought your phone from or htc denmark.
ah for me too little too late.......... still waiting for an O2 rom the bloody bas*ards!!
Whoops!
Just a little too late! Anyone want to buy a bricked XDA Orbit? ;-)
Does anyone here work for the carriers? Can they provide an official O2 ROM to fix out bricked Orbit?
agento said:
Just a little too late! Anyone want to buy a bricked XDA Orbit? ;-)
Does anyone here work for the carriers? Can they provide an official O2 ROM to fix out bricked Orbit?
Click to expand...
Click to collapse
I'll buy it where do you live
agento said:
Just a little too late! Anyone want to buy a bricked XDA Orbit? ;-)
Does anyone here work for the carriers? Can they provide an official O2 ROM to fix out bricked Orbit?
Click to expand...
Click to collapse
Its only truely bricked if the bootloader is damaged - if you can get into bootloader mode you can salvage with the factory rom.
meschle said:
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable and flash factory rom. You do not need to be activesynced to do this.
Click to expand...
Click to collapse
How do I flash the factory rom from here please?
arif101 said:
How do I flash the factory rom from here please?
Click to expand...
Click to collapse
Well you need the factory rom from o2 - o2 have not released it so there is a problem. I have not found any links to download this rom or a link to a dumped rom. I will ask others in the team if they know a link and let you know.
Did you manage to get into bootloader mode?
meschle said:
Well you need the factory rom from o2 - o2 have not released it so there is a problem. I have not found any links to download this rom or a link to a dumped rom. I will ask others in the team if they know a link and let you know.
Did you manage to get into bootloader mode?
Click to expand...
Click to collapse
Yeah the device goes into the bootloader mode. If you could find out where i can get the factory rom from that would be great. Also if i could have instructions how to upload the rom in the bootloader mode i would really appreciate it.
whats about the upcoming crossbow rom for the o2 xda orbit.Can that be flashed to from bootloader? or is the only way to get this repaierd to send it too o2?
TheGame1594 said:
whats about the upcoming crossbow rom for the o2 xda orbit.Can that be flashed to from bootloader? or is the only way to get this repaierd to send it too o2?
Click to expand...
Click to collapse
Yes if you have a uk o2 orbit and you flash the uk wm6 orbit rom it will be fine as long as you can still get into bootloader mode.
ok thx than i wait a few days for the rom and see if it work's
I have an original HTC P3300. How do I check if my device is CID locked?
I am currently running this ROM: PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
wakke said:
I have an original HTC P3300. How do I check if my device is CID locked?
I am currently running this ROM: PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
Click to expand...
Click to collapse
Unless you have unlocked you're device via imei check - you're device will still be cid locked.
meschle said:
Unless you have unlocked you're device via imei check - you're device will still be cid locked.
Click to expand...
Click to collapse
Is there any chance a tool will be released in the future which allow you to unlock your device for free?
I noticed that for other devices such tools are available.
wakke said:
Is there any chance a tool will be released in the future which allow you to unlock your device for free?
I noticed that for other devices such tools are available.
Click to expand...
Click to collapse
We hope so but none on the immediate horizon.
meschle said:
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid unlock for the artemis is here http://www.imei-check.com/c3unlock.php
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219/ARTE_DOPODAU_1.25.707.02_026990_WWE_SHIP.rar
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Click to expand...
Click to collapse
I flash my rom with wm6 buth it hangs after the update.
now it stops at the first screen. I can start the bootloader and see the usb on the bottom left screen but when i want to use the HTC P3300 WWE factory the solve the problem, i can 't connect via usb. is this because this is not the rignt ROM. I have this version on my artemis 1.12.406.1 9/12/06 FRE. Is there someone who knows where to find his version?
Another point, I've tried to put the nbh directely on my SD Card like explained on the wiki but nothing happens at all.
Please help.
htc p3300 Franch Rom
http://rapidshare.com/files/19995855/ART_HTCFRA_11240601_026790_FRA_SHIP.exe
Someone out there with a HTC P3300 German ROM ? I would be very pleased if someone could provide a link.....
using pof herald beta tool,I decompiled c800 .nbh file,and rebuild it into a herald ruu file,successful write into my p4350,but badly,my herald bricked....
only can start with bootloader..
ipl remain: 4.17.0002(herald wm6 ipl)
but spl become: 1.09.0002(c800's spl)
I try to flash original rom that I used before,but it didn't work by ERROR300,and ppc screen stop at 0%. I TRY any ruu I can find,wm5 wm6,but the same ERROR300.
what can I do? is there any way to go?? or I have to change the flasher?
thanks all,plz help
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
pof said:
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
Click to expand...
Click to collapse
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
when I bought this,It display IPL 5.04.0002 SPL 5.04.0000 ,which rom can I use to fix???
plz give me one.thanks pof
by the way, which cid am I have now? htc p4350 or dopod c800?????
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
duprade said:
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
Click to expand...
Click to collapse
my phone is actually htc herald,no doubt of this,but I bricked it when I change the SPL IPL.... so the SPL had become wrong.
pof,,,,it really became no way out,I think I should go to the shop,and repair it with a new flasher.
I had tried all the language I can found on wiki and web. none of them can work.
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe (can use beforetime)
EURORUU_Herald_HTC_NOR_5[1].4.409.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe
ruu_herald_htc_dan_5[1].4.403.2_4.1.13.34_02.79.90_ship.exe
RUU_Herald_HTC_GER_5[1].4.407.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_RUS_1.8.411.3_02.71.90_Ship.exe
RUU_Herald_HTC_RUS_5.4.411.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_SPA_5[1].4.412.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
HTC_P4350_ITA_4[1].17.408.2_4.1.13.44_02.94.90_Ship.exe
HTC_P4350_WWE_4[1].17.405.2_4.1.13.44_02.94.90_Ship.exe(can use beforetime)
so sad..
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
itje said:
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
Click to expand...
Click to collapse
thank you all the same,but I don't have any problem with what you said.
okay thats good
crappy stuff, bricking
itje said:
okay thats good
crappy stuff, bricking
Click to expand...
Click to collapse
yes,thanks.
I would like to know if I change the flasher,can I make the trouble shoot?
didn't think it was possible to brick a herald. def gonna b more carefull now
yangchao8115 said:
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
Click to expand...
Click to collapse
me too and tried many rom but fail erro 300 0% stop IPL AND SPL 1.08.001 . it was died and waiting for new unbrick way
wooo...cost me 400rmb to make it repaired,changed a flasher and I now the make my herald superCID . after repaired I used the SDcard to flash the wm6ruu (using the file named heraimg.nbh on sdcard) .whatever it's ok now thanks everyone
Can anyone help me with this?
I f*cked up my 6.0 update...
Cant find it anywhere on the net...
... So I need the original t-mobile wm 5.0 rom... PLEASE HELP ME!
Farian303 said:
... So I need the original t-mobile wm 5.0 rom... PLEASE HELP ME!
Click to expand...
Click to collapse
there is no wm5 NL version, if you search here there are hundreds of people after the same ROM, no rom here or on the internet.
you can find wm5 EN version and you can search this forum for it.
the phone doesn't start up anymore, only the t-mobile screen will load, the menu won't..... Any suggestions? Its Cid Locked, No original rom....
Farian303 said:
the phone doesn't start up anymore, only the t-mobile screen will load, the menu won't..... Any suggestions? Its Cid Locked, No original rom....
Click to expand...
Click to collapse
First try to hard reset the device (search your manual how that works). If that doesn't work:
Try USPL and a different (WM6) rom a few times. Maybe search for a way to enter the boot loader, that's where/when USPL is executed. If you can enter that, USPL should be able to run I guess.
bricked artemis
Can anyone help me with this?
I f*cked up my 6.0 update...
Cant find it anywhere on the net...
hi Farian 303
i also once bricked my mda compact3.
you probably forgot to use uspl (super cid unlocking) b4 installing your stuff (another rom etc) on it.
The only way is to send it to the company where u bought your telephone. If u have guaranty, then they will restore it for free for you.otherwise unless if u dont have guaranty, then go to erlan.nl and that guy will do it for you for 30 euro.
success
i have a duch wm5 rom but on my divice.... how can i make it to a rominstaller?
neorotic said:
i have a duch wm5 rom but on my divice.... how can i make it to a rominstaller?
Click to expand...
Click to collapse
You can't.
Have you already tried to run USPL again and then flash an other rom on your device????
ofcource... if got 2 divice's
one standaard with wm5 dutch
and one with B&B 4.3
Is this gonna work to unbrick my device? Because i don't know how to USPL from the bootloader?
ok.do it in your ways.I don't need to do so many things and to be a thief even I don't own a herald.
happy now?
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
itje said:
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
Click to expand...
Click to collapse
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
canonyang_China said:
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
Click to expand...
Click to collapse
a
when will it be available then?
itje said:
a
when will it be available then?
Click to expand...
Click to collapse
I don't know.you should ask olipro.
IF you are T-WING or VADEFONE or HTC 4350 no need to unlock.just use JumpSPL by pof to flash your SPLASH EXTROM OS,but don't do anything else.
JUMPSPL,jump into 0x10000000,then flash with ROMUpdateUtility.exe to flash NBH file.
NBH file can make youself by using HTCRT.exe.
SPLASH file can make youself by using SplashScreen.exe
EXTROM you can edit it with winimage.
cheer.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Help Link Doesnt Work
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
thanks!!!!great work!i think very much people want to use it ~~~~~~~~~`
lxa786 said:
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
Click to expand...
Click to collapse
use proxy http://www.ok-proxy.com/ enter the link into it.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Click to expand...
Click to collapse
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:
Click to expand...
Click to collapse
hdubli said:
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:
Click to expand...
Click to collapse
MAYBE that a way.I know that the spl ipl must be suit for the radio or it will not boot,will gone black screen.
I do want to confirm something.
first,you mean flash high SPL IPL like WM6 one totally NBH via Jumpspl?
second,Jumpspl to flash,if you succeed.the device will boot normally?
third,after you flash,which cid do you have?(check in MTTY or try to flash the ruu which you get the NBH)
fourth,if I want to try,maybe I would like to make a nbh with hard-spl to flash.after all,it cid unlock,and we can do something more if it failed.
cheer
Click to expand...
Click to collapse
papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
yangyqh said:
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
Click to expand...
Click to collapse
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
canonyang_China said:
use proxy http://www.ok-proxy.com/ enter the link into it.
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Click to expand...
Click to collapse
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
zubi1984 said:
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
Click to expand...
Click to collapse
If you are htc p4350,don't worry about anything.follow my steps:
1,Take off your battery to get you SN.
2,GO TO www.htc.com
3,Mouse action to E-CLUB icon.
4,Join is member with your SN,then login on.
5,You will see "Phone Software Updates" follow it and you will get a Offical RUU cid suit your device.
6,After downloaded,RUN the RUU and your device will back to life.your IPL SPL will change into 4.17.your os will be wm6.
7,if you can't find anything in "Phone Software Updates".please try all the WM6 RUU for HTCP4350 in the first post to find one suit for you cid.try the WWE one first.
cheer
exxi said:
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
Click to expand...
Click to collapse
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！
Tell the people around you：Taiwan is a province of China！！！
cheer for you
yangyqh said:
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！
Click to expand...
Click to collapse
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
edzilla said:
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
Click to expand...
Click to collapse
yep,you are right