Database Users

Dead Dutch HTC 3300?

Hi Guys,
I have searched the forum, but no solution for my problem. I had a dutch htc 3300. My device is not unlocked. I have tried to flash the pdamobiz rom to my device and since can`t get by the splash screen. STUPID!!! I can get into the bootloader but I need the original dutch rom to flash. Can anybody upload please? Cannot do anything with it now.
If I am right, there is no way to unlock the device in this situation!?!
Any suggestions?
thanks

Exact same issue a couple of hours ago.. see my Help Desperate post below this one.. it worked for me.

how
What exactly did you do? I did not understand your thread. How did you unlock your device?
What is meant by this:
not your flashing one, but clean bootloader, by hardreset followed by record and reset
thanks

Wait
Hi Guys,
Is there not a solution? Do I have to wait for HTC to release a dutch rom upgrade? I still don`t understand why the Pdabiz rom killed my device?
Please help me out
thanks

hakanos said:
What exactly did you do? I did not understand your thread. How did you unlock your device?
What is meant by this:
not your flashing one, but clean bootloader, by hardreset followed by record and reset
thanks
Click to expand...
Click to collapse
That refers to the flashing Tmobile boot screen that shows and stays.. it wouldn't boot any further.
If you press record (left top side of your device, small button above the volume slider) and hold this while pressing reset you will get into the real bootloader mode (a tri-colour screen) that allows you to do a USB connect.
Now go to: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
and download the following ROM for your T-Mobile device:
T-Mobile English T-MOB005 ARTE***** 1.13.110.1 9/22/06 1.13.110.101 1.13.0000 02.49.90 4.1.13.25 (direct link: ftp://xda:[email protected]/art_tmouk_11311001_024990_wwe_ship.exe)
Just run this exe while in that bootloader (tri-colour) mode.
Good luck, that did it for me.

Not T-mobile
Hi,
Thanks for your reply. But my device is not T-mobile branded. It is a original HTC.
Tried your method but does not work.
Will have to find someone with a dutch rom I think
I am out of ideas

*bump
I have the same problem.. I can get into bootloader screen, but I can't find a T-Mobile ROM to flash.
Anyone with a working link to a T-Mobile ROM? The link was removed from this page..
Thnx

Pyth said:
I have the same problem.. I can get into bootloader screen, but I can't find a T-Mobile ROM to flash.
Click to expand...
Click to collapse
What language was your original T-Mobile in? I presume Dutch since you live in Holland. Unless you had your phone unlocked before you tried to flash it, you can only restore the same ROM. Unfortunately there is no Dutch ROM as far as I know.

So how did you solve it? Thought you had this problem 2 months ago..
And yes the original language was Dutch..
Im contacting T-Mobile right now, and they should have a NL version but the site is down atm.

Pyth said:
So how did you solve it? Thought you had this problem 2 months ago.. And yes the original language was Dutch..
Im contacting T-Mobile right now, and they should have a NL version but the site is down atm.
Click to expand...
Click to collapse
Personally I never tried to flash my phone, maybe you read an answer from me to someone with a similar problem.
T-Mobile can provide you with the correct ROM, but I don't think it can be found at their site. Well, it was not there last time I looked anyway.

grun said:
Personally I never tried to flash my phone, maybe you read an answer from me to someone with a similar problem.
T-Mobile can provide you with the correct ROM, but I don't think it can be found at their site. Well, it was not there last time I looked anyway.
Click to expand...
Click to collapse
Hmm you were right.. it was somebody else.
The ROM should be avaible @ http://www.t-mobile.nl/software but that site isn't working at the moment. They told me that the only thing I could do now, is going to a T-Mobile shop and let them send it for a fix.
So my hopes are on a PM that I send to the author of this post. Perhaps he's able to give me the original ROM.

Pyth said:
So my hopes are on a PM that I send to the author of this post. Perhaps he's able to give me the original ROM.
Click to expand...
Click to collapse
Mmm, I think he was looking for a T-Mobile ROM in the English language, so you cannot use that because it has a different signature. Unless you're phone is unlocked?

nope..
But I can give it try anyway..
Want to use the fixing by T-Mobile as a last resort..

Pyth said:
Want to use the fixing by T-Mobile as a last resort..
Click to expand...
Click to collapse
I just checked their Dutch site and it is up and running again. Hate to disappoint you, but there is no original complete Dutch ROM for download, only an update with a Blackberry Client.
You may find a ROM for a MDA III though, be careful not to use that one because that is a different model, also known as Blue Angel. It has a sliding mechanism and a keyboard for example.

grun said:
I just checked their Dutch site and it is up and running again. Hate to disappoint you, but there is no original complete Dutch ROM for download, only an update with a Blackberry Client.
You may find a ROM for a MDA III though, be careful not to use that one because that is a different model, also known as Blue Angel. It has a sliding mechanism and a keyboard for example.
Click to expand...
Click to collapse
Weird.. I still get an error on this site: http://www.t-mobile.nl/software/

Pyth said:
Weird.. I still get an error on this site: http://www.t-mobile.nl/software/
Click to expand...
Click to collapse
https://www.t-mobile.nl/zakelijk/media/download/BA_TMNL_14200_119_11300_Ship.exe
MDA III Update...
I also have my P3300 f*cked up...

Thnx for the link!
But this doesn't work if your MDA is in bootloader.. this program needs an ActiveSync connection

Hmm...
I'm thinking about sending it to HTC voor repair
I'm going to do one more thing and that's is backup the OS
from a friend that also had a HTC P3300 NL and hope to make
a ROM file...
So let's hope that will work!

But if you made a backup you still need to connect to your MDA while it's in bootloader...
If anyone knows how to do that...

Yep i know... i've tried everything! with mtty.exe and nothing
works.
See below the reaction from IMEI-CHECK:
Hello,
sorry to tell you the BAD NEWS but you REALLY can not fix the phone yourself.
You only have 2 options to get the phone fixed:
1) you find the "ORIGINAL HTC P3300 DUTCH ROM Update" and flash the device from bootloader (most likely not available)
2) you send the phone to repair
Sorry to tell you but there are REALLY REALLY REALLY REALLY REALLY no other options.
The mistake from you was to use the risky ROM update without CID unlocking the phone BEFORE.
Regards,
IMEI-CHECK Team
----- Original Message -----
Hello,
I've a broken HTC P3300 (Dutch). The story is this:
It has no sim-lock but it does have a CID-Lock.
I update my Dutch HTC P3300 to this ROM:
- PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
and that whent great. Everything worked. After this i saw another ROM and i installed it:
- Tom HTC Artemis Rom v2.00.01 PDAVIET
and the update whent fine, but after hard reset it stops at the HTC Logo with the version numbers.
I only can get to the bootloader and do some thing with hyperterminal (mtty.exe).
When i want to install this ROM:
- HTC_1.12.405.01_026790_WWE_SHIP
it says that i get this error after 2%:
ERROR [244] WRONG MODEL ID
When i use art_tmouk_11311001_024990_wwe_ship.exe it says i have the WRONG VENDER ID.
I have made a backup with aWizard and have these files:
-HTCLogo.nba
-OS.nba
-Radio.nba
-Splash.nba
-boot.rgu
and a folder ExtRom that is empty...
Can you help me with this? I hope so!!
Thanks for your help!
Version numbers:
IPL 1.12.0001
SPL 1.12.0000

Help me I'm stupid! Orbit boot problem after bad flashing

hi I've tested a new powermap.exe dopod rom but after reboot my O2 still freez on boot screen (I can see only O2 boot screen with radio and rom version), so I can't connect my Orbit in windows mode, only in IPL boot (via usb) but I've this error when lounch any rom:
INVALID MODEL ID ,with any original rom
INVALID UPDATE TOLL ,with any modified for imeicheck upgrade
yes, I've unlock my Orbit via imeicheck but now I must have the original Germa rom for repair it...please anyone konw the solution of my problem or have any original German O2 rom?
help me please!

Hi ...
If you had unlocked your Device with IEMI Check, and everything was fine, and you sure that your device is now CID unlocked, than try T-Mobile original ROM (should help) IF not? So ... Welcome Here
Cheers...

I supposte that the only way is find the original O2 GERMAN rom, anyone have it?
I'm stupid, stupid, stupid!!!!

do what j0kkk3r propose, find tmouk_shipped rom and try that one. it helped me

thefamous said:
INVALID MODEL ID ,with any original rom
INVALID UPDATE TOLL ,with any modified for imeicheck upgrade
yes, I've unlock my Orbit via imeicheck but now I must have the original Germa rom for repair it...
Click to expand...
Click to collapse
That's strange... I thought that you should be able to flash any ROM after unlocking, not just the original German one. Maybe something went wrong during unlocking? I suggest that you send an email to those guys from imei-check, maybe they can offer you a solution.

grun said:
That's strange... I thought that you should be able to flash any ROM after unlocking, not just the original German one. Maybe something went wrong during unlocking? I suggest that you send an email to those guys from imei-check, maybe they can offer you a solution.
Click to expand...
Click to collapse
I've just sent email to imei support, look:
Hello,
you only can get it back to life with an O2-XDA-German-ROM (which odes not exist right now).
The other option is to send the device to repair (service centre).
The unlocker can NOT work in case your device has a malfunction (it is described in DETAIL that the unlocker requires a working ActiveSync connection on the our web site where you purchase the unlock).
Regards,
IMEI-CHECK Team
----- Original Message -----
>
>Hi, I'm disperate (and stupid man).
>my orbit is stuck on boot screen exactly as manples'. i tried to flash
>pdamobiz custom ROM. i can enter bootloader.
>I've just buy your unlocked service but now I can't install any rom because my
>orbis still on boot O2 screen ()freez).
>So your application strart only in windows and via actyvesync mode, and I've
>no connection in actyvesync mode with my stuck orbit.
>only solution is to found the original rom, do you have the O2 GERMAN rom?
>please help me!!!!
>I've bought the Orbit in germany (O2 operator, and in origin there was a
>GERMAN ROM).
>best regard and excuse me for my bad english.

phsnake said:
do what j0kkk3r propose, find tmouk_shipped rom and try that one. it helped me
Click to expand...
Click to collapse
do you know where is the TM shipped rom? I have O2 Orbit and originary was GERMAN rom...

someone in this forum posted his own web page, i guess its there.

link: www.our-xda.co.uk

YUPPYYYYYYYYYYYYYYYYYYYYYYYYY My ORBIT O2 was re-born
the solution is in this magic ROM (I've O2 but this is the compatible rom Tmobile, i suppose...)
art_tmouk_11311001_024990_wwe_ship.rar
thanks to all.

I Had The Sam Problem
HOW DID YOU DO IT MANNN??? I have tried to do this with a tmouk ROM but I always have the same error. WHAT IS THE CATCH????

It is posible only if your Device is CID unlocked ... If not ... only service or imei-check...
Cheers ..

to jokkk3r:exactly, lot of people flash first, then read. ooops I dont have supecid unlocked-whats now, please help im desperate....
& i dont understand why anyone is trying ROM thats well known for flashing probs-pdamobiz- it could be interesting to find out how many of us had troubles after flashing

2 phsnake:Yes, but how many ppl have it installed and workin WELL? Witch ROM you thing is the best for O2 At the moment?

psrejic said:
HOW DID YOU DO IT MANNN??? I have tried to do this with a tmouk ROM but I always have the same error. WHAT IS THE CATCH????
Click to expand...
Click to collapse
I apologize for you. My orbit was originary German and locked, so I'm unlocked it with imeicheck utility, so I was installed a HTC wwe ship rom. And yesterday I has a problem with powermap rom. Now I've solved with TMobile rom, I don't know if working because my Orbit was CID unlocked (I belive no, because if now i try to install htc wwe ship rom I've wrond ID error message..) Do you have try to install via bootloader mode? enter in bootloader, so double click on tmobile rom.
bye

2 jokkk3r im using dopod shipped, im quite happy. its +-new dev. it'll take some time till here will be some roms or at least tools for cooking them.but most im waiting for is extrom unlocker like is for universal,thar U can use it like a storage

I need help...

I heve a big problem...
When I unlock my SPV M650 by http://www.imei-check.co.uk/ i thing that it is unlocking CIDlock...
And when I upgrading to WM6 but I seen error... And i did reset and now I see only screen with Orange logop and OS information...
Plese help me
//sory to my english but it is wery low!//

you need to find your original rom, reflash that, then use USPL and unlock it, that route, then reflash the rom you want to use.

[email protected] said:
you need to find your original rom, reflash that, then use USPL and unlock it, that route, then reflash the rom you want to use.
Click to expand...
Click to collapse
Cen you give me instrucion..?

And do you thing that on orginal CD, a find ROM??

O2 xda Orbit problem

Hi there, I got my O2 xda orbit 2 weeks ago from germany and I decided to change the german rom to an wwe one, but the phone got bricked and stays on the welcome screen
I think I did a CID unlock but I am not sure. I can get to bootloader but I don't know what to do. How can I put a WWE WM6 on my Orbit? and also how can I check if my battery is above 50%?
Thank you

flash device with original O2 ROM.
regards,

Ok, but the only original O2 roms that I found in this forum are WM5, the original WM on my Orbit was WM6

Have you tried using the original O2DE WM5 ROM, although I am fairly sure that O2DE were one of the first to release a WM6 ROM.
EDIT: Yes, here it is: ftp://htc_us:[email protected]_O2_DE_3.4.207.2_4.1.13.41_02.88.90_Ship.exe

So when I flash the original O2 rom, can I upgrade to an english WM6 and how?

Follow the instructions on the UPSL thread to CID unlock your device. NOTE: Best to use an XP computer, Vista will not work right.
Then immediatly flash the ROM of your choice.

I think my CID is unlocked. I followed the instructions that were in the forum and the spl changed to 1.11.0000. Which ROM file should I put on my device? thx

n1k1 said:
I think my CID is unlocked. I followed the instructions that were in the forum and the spl changed to 1.11.0000. Which ROM file should I put on my device? thx
Click to expand...
Click to collapse
Go for B&B3.7. Stay clear of the O2 Official ROM. It's crap!!!

O2 WM6 rom
use the O2 wm6 upgrade nothing wrong with it really go to their site and download . If you have a UK O2 orbit you will not need to CID unlock it will go on with no problem

Shand359 said:
Go for B&B3.7. Stay clear of the O2 Official ROM. It's crap!!!
Click to expand...
Click to collapse
You don't like it then that is fine, but crap? No. It is wholly stable and works absolutely perfectly.
Shand359 said:
Don't have anything new to add that hasn't been said already.........except that i don't like it. Been using B&B3.7 until last night. O2 WM6 seems like a step backwards from this ROM, not sure why
http://forum.xda-developers.com/showpost.php?p=1410662&postcount=8
Click to expand...
Click to collapse

Yes it is stable, yes it works perfectly.
I still don't like it.
B&B3.7 is very stable. It also works perfectly. plus it also works a damn site faster too.
I am entitled to my own opinion, you are to yours.

n1k1
did you recover device?
you can flash any ROM with USPL installed, read USPL manual.
regards,

Thanks to everybody for their comments, but active sync does not work on my pc when the phone is bricked and stays on the welcome screen so I can't install the uspl... Also when I am able to fix this problem, which rom would you recommend me to upload on my device?

n1k1
1. you need to flash your device with original ROM it was shipped with.
flashing is done from bootloader. activesync will be unavailable, don't bother. just start flasher and follow the wizard.
2. when device is flashed and operational, install uspl.
documentation is supplied with uspl.
3. since then, you can flash any ROM you like.
regards,

n1k1 said:
Thanks to everybody for their comments, but active sync does not work on my pc when the phone is bricked and stays on the welcome screen so I can't install the uspl... Also when I am able to fix this problem, which rom would you recommend me to upload on my device?
Click to expand...
Click to collapse
Hold TOP LEFT button and press in RESET and get device into bootloader. Can't do anything from welcome screen. Then flash the devices original ROM. After this flash USPL and the B&Bv4 as this is the best available...........as of yet anyway.

Hi
I followed uspl instructions. But after stage 1 (White screen) active sync will not connect. Phone connected to charger, still on White screen.
If advice above about bootloader is correct, could someone re-explain with simple steps.
Thanks colink

herald bricked,seems to be no way out....

using pof herald beta tool,I decompiled c800 .nbh file,and rebuild it into a herald ruu file,successful write into my p4350,but badly,my herald bricked....
only can start with bootloader..
ipl remain: 4.17.0002(herald wm6 ipl)
but spl become: 1.09.0002(c800's spl)
I try to flash original rom that I used before,but it didn't work by ERROR300,and ppc screen stop at 0%. I TRY any ruu I can find,wm5 wm6,but the same ERROR300.
what can I do? is there any way to go?? or I have to change the flasher?
thanks all,plz help

You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.

pof said:
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
Click to expand...
Click to collapse
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.

when I bought this,It display IPL 5.04.0002 SPL 5.04.0000 ,which rom can I use to fix???
plz give me one.thanks pof
by the way, which cid am I have now? htc p4350 or dopod c800?????

Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.

duprade said:
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
Click to expand...
Click to collapse
my phone is actually htc herald,no doubt of this,but I bricked it when I change the SPL IPL.... so the SPL had become wrong.

pof,,,,it really became no way out,I think I should go to the shop,and repair it with a new flasher.
I had tried all the language I can found on wiki and web. none of them can work.
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe (can use beforetime)
EURORUU_Herald_HTC_NOR_5[1].4.409.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe
ruu_herald_htc_dan_5[1].4.403.2_4.1.13.34_02.79.90_ship.exe
RUU_Herald_HTC_GER_5[1].4.407.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_RUS_1.8.411.3_02.71.90_Ship.exe
RUU_Herald_HTC_RUS_5.4.411.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_SPA_5[1].4.412.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
HTC_P4350_ITA_4[1].17.408.2_4.1.13.44_02.94.90_Ship.exe
HTC_P4350_WWE_4[1].17.405.2_4.1.13.44_02.94.90_Ship.exe(can use beforetime)
so sad..

bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?

itje said:
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
Click to expand...
Click to collapse
thank you all the same,but I don't have any problem with what you said.

okay thats good
crappy stuff, bricking

itje said:
okay thats good
crappy stuff, bricking
Click to expand...
Click to collapse
yes,thanks.
I would like to know if I change the flasher,can I make the trouble shoot?

didn't think it was possible to brick a herald. def gonna b more carefull now

yangchao8115 said:
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
Click to expand...
Click to collapse
me too and tried many rom but fail erro 300 0% stop IPL AND SPL 1.08.001 . it was died and waiting for new unbrick way

wooo...cost me 400rmb to make it repaired,changed a flasher and I now the make my herald superCID . after repaired I used the SDcard to flash the wm6ruu (using the file named heraimg.nbh on sdcard) .whatever it's ok now thanks everyone