Need the Default Keyboard cab please!!! - Touch HD General

Can anyone give me a cab of the default qwerty keyboard?!?
I ask this cause Dutty on his latests roms removed this keyboard

Up, I need this keyboard too,
functions copy and paste, ctrl and shift are very confortable

No one?!?!?
Nice guys, thkx for not helping this out...

I also like to have this conventional keyboard back.
Is there still no solution???

Related

Keyboard Not Mapped Correctly

Here's a weird one... I have a rogers TyTN (it did this on WM 5 as well as 6)
The Y, U, and I keys all have weird results. The arrow keys do the same as the Y, U and I keys.
The Y key does a < key and then the Y and the U and I keys do a down arrow then U or I depending.
How can I get the keyboard layout right again? This is driving me nuts! Ican't text or email right now because it's constantly doing these weird things.
Thanks for any help!
You can try the cabs that setup the keyboard but if this doesnt work it might be a hardware problem, here are the links!
Tytn keyboard cab: http://forum.xda-developers.com/attachment.php?attachmentid=53517&d=1191857943
8525 keyboard cab: http://forum.xda-developers.com/attachment.php?attachmentid=53516&d=1191857943
Edit: im assuming you know how to install a cab but ill go ahead and say how to. Put file onto your hermes and then on the phone go to file explorer and click on the cab you put on your phone.
FTGF
Or HTCustom and Schaps Adv Config have a options in them to change it.
Thanks for the advice. In the advanced config it was set to chinese. I switched it to english, but got the same results.
I've also tried both mappings provided as cab files and no joy :<
Must be the phone... considering it did this with the rogers firmware on it that's the only thing that makes sense... back to rogers!
maybe you have the htc touch keypad + keyboard installed. I had the same problem, deinstalled the touch keypad / keyboard and it worked fine.
Just the thing is, I'd really like to use both, touch keypad and correctly functioning slideout keyboard...

HTC Diamond keyboard

I've been trying a cab file which contents the keyboard from the new HTC-Diamond. But it didn't work without any problems. I couldn't configure the keybord options, the programm always crashed while trying it. Touch keyboard and keypad worked fine. The cab file is only for english and italian language, but I need it for a german device.
Has anyone got an idea how to solve the problem?
The new keyboard looks very nice. Bigger and finger-friendly buttons. It works like Iphone keyboard whith preview of the letter you're typing.

Larger Touch Keyboard

ok. I know I saw someone mention on this forum that there is a cab you can install for a larger on-screen keyboard. I've been searching the forums, but can not find this cab. I hate typing with my stylus, and with tf2d installed I rarely flip open my phone anymore (landscape is still not fully supported).
anyone know where I can get a hold of the large on-screen keyboard? An attachment or a forum link would be ideal.
thanks again!!! =)
I'd definately be interested in this too...
try this thread -
http://forum.xda-developers.com/showthread.php?t=431683
=(
thanks so much for the help! I reviewed all of these keyboard and decided that I like the HTC touch keyboard the best..... Only problem is. I install the cab, and it does NOTHING! It still has the same old crappy on-screen keyboard! (stylus required)
I am using ttran's OTP 7 (tf2d manila)
I am uploading the cab now, so anyone else who has time.... test this and let me know if I am the only one with this problem... and if you know a solution please post.
Thanks again!
- Dave
You have to touch & hold the little arrow by the keyboard to select the new one. You'll have to do this every time you reset your phone, but the attached cab will fix that. Just install it & you'll see it in your programs list. This will allow you to set the default keyboard so it doesn't reset each time you power up your phone.

WATCH: Big Full/Semi Qwerty installation HAZARD

The semi-qwerty keyboard cab file is available if you google it. However after installing it, I realize the accent key on my physical keyboard does not work anymore.
This is the answer I got on the other forum:
can't be help, because the key actions are defined according to the keyboard layout, and the default layout which includes the accent key is being overwritten by the cab file. You probably can revert back to stock keyboard layout and the semi-qwerty/full-qwerty/phonepad SIP, but you probably will lose the T9 function.
alternatively, use the symbol key to type the accent characters.
Does someone knows how to solve this problem so both Full/Semi Qwerty and physical keyboard work together.. especially cause i'm using Croatian letters čćšđž
THX
I just realized I have the same problem. Maybe someone can help us have both accent letters and Touch HD virtual keyboard...
Is this only registry problem or maybe have to change some dll? anybody?
Up! Maybe someone has an idea.
nothing to do?
blackstone keyboard is the best but we wan't to resolve the accent issue...please help!!
nothing?
You could try this: http://forum.xda-developers.com/showthread.php?t=479464
Doesn't mess with the àü key.
Ok, I tried that keyboard, but it doesn't restore the accent key functionality. Maybe after a hard reset, but I wanted to avoid it.
Same problem here. Blackstone keyboard does my "au" hardware key unuseful - it dos not work.
Also T9 does not work with hardware keyboard.
I think HR is the only way for me - and you at this moment
Would SPB Keyboard 4.1 work without messing up the accent button? Is it any good?
I have the same problem, but with the Touch Diamond 2 keybord. It's really annoying
I had to lose all my data to update the firmware. After that I tried the SPB Keyboard and it's really good. It has layouts for a lot of languages and the accent key works.
ive used version 1 of this and it did not mess with my keyboard. this is the new version that just came out. i havent tried it because version 1 is working good enough for me.
http://forum.xda-developers.com/showthread.php?t=487677
news.....?
Finger Keybord 2 ??

Can't have T9 automatically ON for HW keyboard

When I use HW keyboard it always has ABC mode on. I have to use FN key and T9 key to choose T9 manually.
How can I enable T9 to be automatically ON when I use HW keyboard?
Thank you for your help
the t9 always works with a onscreen keyboard. Also if you manage it with a hack a problem would be to where the word suggestions should pop up on the screen.
when someone write a programme for your suggestion than it would be a custom keyboard without letters, only word suggestions and pops automaticly up when the keyboard on the pro is used.
Maybe someone already wrote it.
It would be nice trough
Search for the cab god damn it! There is a cab in one of the ezinput keyboard threads in dev & hacking that allows T9 to always be on (Yes, including the HW keyboard).
Kraize said:
Search for the cab god damn it! There is a cab in one of the ezinput keyboard threads in dev & hacking that allows T9 to always be on (Yes, including the HW keyboard).
Click to expand...
Click to collapse
You don't happen to have a link to this cab at hand, do you? I for one would like to have the T9 always on (even with the hw keyboard), but did not manage to find the correct thread / cab even after an extensive search.
I searched with no result, unfortunately. If you could be so kind to address me to that cab, I would be very grateful indeed.
ninja.rogue said:
I searched with no result, unfortunately. If you could be so kind to address me to that cab, I would be very grateful indeed.
Click to expand...
Click to collapse
Oh that was so hard I almost had to use my brain
First result when searching on ezinput T9 always enable came up trumps...
DeadKeys / T9 as default behaviour for the Fn+Space combo - Full HW Keyboard phones
I thank you very much. Even if I walk around here for years, sometimes it happens that I am not able to find out things. Fortunately there are others who help
You're very welcome, glad to help.
Thanks for pointing out about the keyboard, did you test it and it works?
why not FN + Space It´s working at my device
Because I would like that when I slide out the keyboard I can immediately type with T9 on, without switching it on manually - this is the meaning of "automatically ON"
okaaaay. sry for that, but just tell me the sense of T9 with a "complete" keyboard!?? Do you also have T9 at your computer at home?
comingloud said:
okaaaay. sry for that, but just tell me the sense of T9 with a "complete" keyboard!?? Do you also have T9 at your computer at home?
Click to expand...
Click to collapse
I see a couple of ways T9 is useful with the full keyboard.
1. Words like "won't" can be typed out with w-o-n-t rather than w-o-n-FN-'-t
2. It helps with long words. We can use the arrow keys to choose the word after a couple of letters rather than typing out the rest of the word.
There's a fundamental difference between the keyboard on a mobile device like the Rhodium and your desktop keyboard. On our Rhodium, we have only our 2 thumbs. On a full size desktop/notebook, we make use of all 10 of our fingers.
It seems that we are concentrating on why I have asked to have T9 ON, while I was asking HOW to have it on.
If you don't agree that it is a good thing that somebody finds out how to, simply don't post here
I never used T9 but it supposed to offer words from vocabulary? in my case it doesn't...
well, has someone found a way to make this work on landscape or hardware keyboard ??
having to always activa xt9 is boring ..
(that cab does not work) looking at the registry is changes from 1 to 0 when changing to landscape and it's the htc keyboard doing this. If you activate xt9 and change to the default windows keyboard it works but then you have a small keyboard when on portait.
I agree, the same thing happens to me. The easiest solution is to have it rotate to portrait, pull up the XT9 keyboard and then open the screen.
It's a pain, though. Would love another solution.
Dead key
None of CABs which can be found here are not working the way that if I will press Fn+Sym it acts as deadkey - always T9 dialog is shown. Have anybody idea how to change it?

Categories

Resources