Keyboard Not Mapped Correctly - 8525, TyTN, MDA Vario II, JasJam General

Here's a weird one... I have a rogers TyTN (it did this on WM 5 as well as 6)
The Y, U, and I keys all have weird results. The arrow keys do the same as the Y, U and I keys.
The Y key does a < key and then the Y and the U and I keys do a down arrow then U or I depending.
How can I get the keyboard layout right again? This is driving me nuts! Ican't text or email right now because it's constantly doing these weird things.
Thanks for any help!

You can try the cabs that setup the keyboard but if this doesnt work it might be a hardware problem, here are the links!
Tytn keyboard cab: http://forum.xda-developers.com/attachment.php?attachmentid=53517&d=1191857943
8525 keyboard cab: http://forum.xda-developers.com/attachment.php?attachmentid=53516&d=1191857943
Edit: im assuming you know how to install a cab but ill go ahead and say how to. Put file onto your hermes and then on the phone go to file explorer and click on the cab you put on your phone.
FTGF

Or HTCustom and Schaps Adv Config have a options in them to change it.

Thanks for the advice. In the advanced config it was set to chinese. I switched it to english, but got the same results.
I've also tried both mappings provided as cab files and no joy :<
Must be the phone... considering it did this with the rogers firmware on it that's the only thing that makes sense... back to rogers!

maybe you have the htc touch keypad + keyboard installed. I had the same problem, deinstalled the touch keypad / keyboard and it worked fine.
Just the thing is, I'd really like to use both, touch keypad and correctly functioning slideout keyboard...

Related

PCM Keyboard isnt working

hi,just installed the pcm keyboard on my hermes.
now i want to setup the keyboard in the system settings, but if i choose the PCM keyboard and click OK, the pcm keyboard is still not choosen but therefore the standard keyboard.
another problem. if i choose PCM Keyboard and then Options, there comes a message up
Code:
PocketCM Keyboard has to be the current SIP in order to configure it.
And now?
tried a reset ?
Same problem here. I've been trying lots of different versions without success. I uninstalled many other apps, removed today plugins, enjoyed magical steps such as [reset, install, reset, select, reset and try to use] and even after hours and hours of setups I never saw what this soft was looking like :-(
I'm running WM5 on HTC wirzard (Qtek 9100).
You must download SIP Changer.
http://forum.xda-developers.com/showthread.php?t=271008
Then run Programs - SIP changer and change keyboard on PCM keyboard. Then you can go to Setting and set up PCM keyboard.
divocak said:
You must download SIP Changer.
Then run Programs - SIP changer and change keyboard on PCM keyboard. Then you can go to Setting and set up PCM keyboard.
Click to expand...
Click to collapse
I did this twice, still doesn't work !
I had the same problem, Sleuth's SIP Changer fix it, never had that problem since.
Try doing it after a soft reset.
I had a similar problem, here is what happened with me:
1. I uninstalled v0.8 then installed the latest one
2. tried to change the options of the KB in the settings menu..
3. I got the same message
4. the I looked at the kb icon (down near the soft keys) and it was not set to PCM kb..
so all I did is changing it to PCM kb and then went back to options and everything works fine now...
this might sound very stupid.. but it worked for me... I can't understand why this happened in the first place.. but you can give it a try..
cheers
my problem was solved with the SIP Changer
Sorry for last post. I didn't understand SIPchanger needed a soft reset. This works now. Thanks !
i can load the software fine on my hearald but it comes out really big and doesnt fit on my screen. only the middle part of the keyboard shows up on screen. but that part fills 90% of my screen. can someone please offer a solution.
rackols said:
i can load the software fine on my hearald but it comes out really big and doesnt fit on my screen. only the middle part of the keyboard shows up on screen. but that part fills 90% of my screen. can someone please offer a solution.
Click to expand...
Click to collapse
are you sure you did not install the VGA version??
Thanks Duke. Feel kinda foolish now appreciate your time.
Hey, I did the steps that you said and now my phone seems bricked. It gets through the boot screen and into the Windows Mobile 6 Professional screen and stops. Any ideas?

URGENT! SIP Keyboards messed up! (ukD Diamond R8)

hello,
i dont know why, but may whole device is somehow completly messed up concerning custom keyboards/language. i really need someone who can help me fix this:
i installed the R8 rom normaly. then added hikeyboard, resco keyboard and pcm keyboard.
sometimes when booting i geht the default keyboard i selected default. on some boots i cant select ANY other keyboards than the htc's. sometimes on all htc touch inputs i cant see the pad.
pcm keyboard cant be selected at all. it just reverts to cassic keyboard.
also i tried to change the dictionary of the standard keyboard. installing t9 german.cab didnt work (mssp2_de.lex).
how can i fix all those things? i have heard uninstalling the htc inputs should help. any ideas?
i just want my resco keyboard with german dictionary and nothing else...
thanks
its not only your sip problem, i have also the same problem but with the time zone. my time zone is jerusalem, israel but after soft-reset it goes back to the defult time zone witch is different from mine.
i need to change it is the registry 4 sure.
1tomer14 said:
its not only your sip problem, i have also the same problem but with the time zone. my time zone is jerusalem, israel but after soft-reset it goes back to the defult time zone witch is different from mine.
i need to change it is the registry 4 sure.
Click to expand...
Click to collapse
well i dont have that problem, time zone stays the same after soft reset
worstenbrood said:
well i dont have that problem, time zone stays the same after soft reset
Click to expand...
Click to collapse
same here..no problems..
Not sure if this will help, but for me I have to make the following reg changes to get PCM working on udK's roms:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409
"Layout Text"="eT9 IME"
"Ime File"="\windows\eT9ime.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}
"(Default)"="XT9"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}\IsSIPInputMethod
"(Default)"="1"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}\InprocServer32
"(Default)"="\Windows\eT9Sip.dll"
HKCR\CLSID\{73AB106C-A726-484b-B610-BE3E1CF39821}\DefaultIcon
"(Default)"="\Windows\eT9Sip.dll"

Unable to install Pocket CM keypad

Hi All,
I am a newbie to I have a htc touch. I am trying to install Pocket CM keypad on my phone. I downloaded the .cab file from the website and i copied it to my phone using activesync. When i click on that cab file I just get a message Pocket CM installation unsuccessful.
Please let me how to install it. Also i want to install the contact on my phone
Also can someone suggest which is the best keypad software I can install. Also what is the software I have to install to switch the phone from potrait mode landscape mode and vice versa
Best input soft - EzInput
Screen rotation software - Windows Mobile Settings -> |System| -> Screen -> Landscape or tap screen rotation icon on HTC Home Launcher tab.
Thanks for that input. But that will permanently change the screen to landscape mode. I want it only on need basis. That is why I posted.
Besides In my phone i have two keypads. One is touch keypad and another touch keyboard.
The problem is most of the times when not reqd "touch keyboard" which is qwerty shows up.
When i want to type a message or a document then only "touch keypad" shows up.
This is highly irritating. Can somebody help me how to get around this. I want to use the qwerty keyboard for typing messages and working with doc.
I have been reading in the website that it is possible to have the qwerty keyboard working with messaging or while typing email
Can some body please tell me how to enable/disable the 20 key keypad and enable the touch keyboard when reqd.
Please please post a reply
I tried the work around of setting the registry key. but now i am having other problems when i press the green button the call keypad does not come. I also cannot press the button 1 to rotate the screen.
Now I have changed the registry key back now. Now I am back to square 1. The two key touch keypad appears for messaging or email. But i cant get the qwerty keypad.
Can some one point me to the fix for the same please. so that i can use the touch keyboard for messaging.
Many thanks in advance
Man, try EzInput. It looks better, works better and touch keypad doesn't switch to qwerty in some apps - you can choose which do you want! Touch keypad OR qwerty. I'm using it 'cause this switching freaked me a lot and now it's OK with EzInput
Can you please point me to the ezinput cab file and how to install it please. Many thanks in advance
http://www.sendspace.com/file/as1z9v
This is the one I'm using

Larger Touch Keyboard

ok. I know I saw someone mention on this forum that there is a cab you can install for a larger on-screen keyboard. I've been searching the forums, but can not find this cab. I hate typing with my stylus, and with tf2d installed I rarely flip open my phone anymore (landscape is still not fully supported).
anyone know where I can get a hold of the large on-screen keyboard? An attachment or a forum link would be ideal.
thanks again!!! =)
I'd definately be interested in this too...
try this thread -
http://forum.xda-developers.com/showthread.php?t=431683
=(
thanks so much for the help! I reviewed all of these keyboard and decided that I like the HTC touch keyboard the best..... Only problem is. I install the cab, and it does NOTHING! It still has the same old crappy on-screen keyboard! (stylus required)
I am using ttran's OTP 7 (tf2d manila)
I am uploading the cab now, so anyone else who has time.... test this and let me know if I am the only one with this problem... and if you know a solution please post.
Thanks again!
- Dave
You have to touch & hold the little arrow by the keyboard to select the new one. You'll have to do this every time you reset your phone, but the attached cab will fix that. Just install it & you'll see it in your programs list. This will allow you to set the default keyboard so it doesn't reset each time you power up your phone.

KeyBoard.

Hi, does anyone know where i can get a "phone" keyboard from? im having to use the stylus all the time now as my fingers arnt the smallest but on my wifes phone (HTC MAGIC) she can have a keypad where its like [ABC] [DEF] [GHI] .. If you get what i mean ? like 3 letters on one key but the keys quite large, hard to explain and im currently running a custom rom if that helps.
Jack
phone keypad
on 1.93 ROM select on Touch Input Settings imput "Phone Keypad". if you whant a larger one use SPB Keyboard

Categories

Resources