Database Users

Face Down Mute and Light Sensor

I am having problems with the face down mute and light sensor thing. I would love to be able to get these working.
I have tried Schaps Advanced Config, Diamond Tweak and Registry Edits.
I would like the device to go into mute (do not ring calls) when it is put face down
Also, I would like to disable the automatic screen going off on call and let the light sensor detect when it is close to my ear and turn the screen off...
Appreciate your help

I think there is no light or proximity sensor on the HD.

I do nothing and my HD goes silent if I turn it face down.

How.. How How How? ...

taimoorhusain said:
How.. How How How? ...
Click to expand...
Click to collapse
I dont know, sorry. It´s simply working. As my HD arrives I do a Hardreset install my software and this works.

Atze001 said:
I dont know, sorry. It´s simply working. As my HD arrives I do a Hardreset install my software and this works.
Click to expand...
Click to collapse
Couldnt one then infer that it is obviously a feature of some software you have installed?

Isn't there any setting on:
setting - system - motion sensor or some kind?

Could we have a list of install software on your HD?

Don't sweat it guys!
It just works out of the box!
And fyi the HD has a Light Sensor, G Sensor and Stylus Sensor.

Yes - the light sensor is in the earpiece area (if you have ambient light sensor option checked [default], have it open in a bright room on a mainly white windows screen then cover the earpice area you see the screen dim)

I don't know about it working straight out of the box but you can certainly do it with Gyrator 2.

Black Antitoon said:
I think there is no light or proximity sensor on the HD.
Click to expand...
Click to collapse
There certainly is...

Actually, I wanted to start this thread myself..
Face-down-mute does NOT work on my HD. Neither with Gyrator ON, nor whent it is OFF.
I have checked the registry (HKLM/Software/HTC/Phone/MuteFaceDown or smth like this..), the key setting is "1" so technically it should work....... But it Doesn't!!

Face down mute works if you have it face up and somebody calls you. Just turn it face down and ring is muted.
This is only thing I found on this topic.

Turning the phone down mutes incoming calls for me too. no problems there..

Ciciban said:
Face down mute works if you have it face up and somebody calls you. Just turn it face down and ring is muted.
This is only thing I found on this topic.
Click to expand...
Click to collapse
This is very useful and it absolutely works. Cool! I thought when we place the phone face down, it would jsut be muted period. I was also assuming that there was a way to do this with Gyrator, but didnt know which event to select on orientation face down. I can turn off the screen, but there is no option in gyrator to mute the phone.
Thanks for the help though.

taimoorhusain said:
This is very useful and it absolutely works. Cool! I thought when we place the phone face down, it would jsut be muted period. I was also assuming that there was a way to do this with Gyrator, but didnt know which event to select on orientation face down. I can turn off the screen, but there is no option in gyrator to mute the phone.
Thanks for the help though.
Click to expand...
Click to collapse
This is what I also assumed, when I am in the meeting and get a call I put it face down and it mutes, but then when someone else calls I need to face it up then down again which ideally doesn't work for me.
Isn't there a key like FaceDownMuteAll = 1?

Unfortunately i have the same problem. Flipping the phone is not muting the ring. Maybe its something to do with what we install. Also another strange issue no matter what i do i have the active sync always running in the background.

I have changeScreen installed and if I disable it it works. I think gsenor apps are the cause

Ciciban said:
Face down mute works if you have it face up and somebody calls you. Just turn it face down and ring is muted.
This is only thing I found on this topic.
Click to expand...
Click to collapse
It works straight out of the box, I installed all sort of Gsense apps and it removed and face down mute still works fine.
Even in the case it is faced down and someone ring, I just have to face up, see whos is calling and face down again, it muted.

light sensor app like Iphone (incall screen off)

I was wondering if there's a app that allows the screen to turn off when you put the phone to you head? Then when you bring it out and in front of you, it turns back on. My Iphone did that and I loved that feature.

upping cause i'm intersted too

im believe this feature on the iphone is provided by a proximity sensor, you can probable do this with the light sensor but it would only work in the day time bc at night the screen would always be off...

not unless you use the gsensor too? i think if you work with the light sensor and the gsensor..you can get it to work. maybe have it only work when theres a active call.

This is an extremely good idea!

now if I was only a programmer

i'd love to see this feature on my diamond/blackstone too, i always have problems with the cursor jumping somewhere else when taking a note while in call...
theres already a thread about that:
http://forum.xda-developers.com/showthread.php?t=451456

sweet. thanks

I really love that fuction on iPhone as well. I found some program that can adjust the Light Sensor to dim the back light as you want. I never try it but surely not work in the dark. If any news on this issue, pls advise!!

I think the g-sensor is the answer, off course in combination with light sensor. If someone could make an app that would turn off the backlight during an active call AND when phone is in vertical position; this could resolve difficulties with light sensor.

aonavy said:
I was wondering if there's a app that allows the screen to turn off when you put the phone to you head? Then when you bring it out and in front of you, it turns back on. My Iphone did that and I loved that feature.
Click to expand...
Click to collapse
There are a couple out there that attempt to solve the same problem the iPhone does.
One I know of is Touchlock Pro - http://forum.xda-developers.com/showthread.php?t=444215
It is free but it still has a little way to go before it is a polished solution
The other is PocketShield -- http://www.pocketshield.net/
It's not free but I found it so effective for the in-call problem as well as general locking/unlocking that it was worth paying for
I've also, as a developer by trade, played with the light sensor, g-sensor, and stylus sensor APIs and tried to create a basic proof of concept that solved just the in-call problem very well and found that without the approach taken by Pocketshield it just was not reliable enough for me.

fireweed said:
There are a couple out there that attempt to solve the same problem the iPhone does.
One I know of is Touchlock Pro - http://forum.xda-developers.com/showthread.php?t=444215
It is free but it still has a little way to go before it is a polished solution
The other is PocketShield -- http://www.pocketshield.net/
It's not free but I found it so effective for the in-call problem as well as general locking/unlocking that it was worth paying for
I've also, as a developer by trade, played with the light sensor, g-sensor, and stylus sensor APIs and tried to create a basic proof of concept that solved just the in-call problem very well and found that without the approach taken by Pocketshield it just was not reliable enough for me.
Click to expand...
Click to collapse
All these programms are great software but are nowhere near the iphone solution... like i already said, the problem is e.g. that if you are on the phone and the person on the other end tells you a phonenumber you need to write down - the cursor always jumps to somewhere else as soon as you put your phone back to your ear (and then take it away again ofcourse to continue to notice the number).

ive messed with those apps before with no luch for what i was looking for. Simple app...JUST for incall and end call. light goesout..then comes back in. those other apps are pretty detaild

pitchbend said:
All these programms are great software but are nowhere near the iphone solution...
Click to expand...
Click to collapse
Very true, but unfortunately this hardware does not have the same sensor as the iPhone so you can only fake it so much.

I'd love to see this developed as well. But just wondering as some have mentioned using the gsensor; what if your laying down using the phone?

any developers out there. this would be awsome. make it simple. only works when the phone is in call. the gsensor sensing the phone from 0-45 degrees and only 0-5% light. seems sorta simple when u look at it like that.

hey everyone. My HTC Touch Pro came with this functionality out of the box. And i really don't like it at all. I think the difference to the iphone is that the screen does not turn back on until the power button is pressed.

millab said:
hey everyone. My HTC Touch Pro came with this functionality out of the box. And i really don't like it at all. I think the difference to the iphone is that the screen does not turn back on until the power button is pressed.
Click to expand...
Click to collapse
My diamond does this already?

mine didnt. very weird.

For what it's worth, S2U2 v.1.42 has an option called "blank screen on call" which essentially disables the touch screen and makes it turn off when a call is connected (both sent and received). To get the screen to turn back on, simply press any hardware button. (Note though that pressing the END button while on a call will end the call as well as turning on the screen.)
I've found this feature to be VERY useful and figured it's as close as we're going to get for the time being .

G-off Display

"Description:
With G-off display you can turn off the screen by rotating and holding the phone upside down and holding it like that for a second.
To save battery while listen to your favorite music, simply point your phone downward, light off. All background processes remain.
Require G-sensor found in the latest HTC devices like Diamond / Pro / HD, etc."
Download

Just what I need! but...
Hi
This is a nice app that i've wanted. I know I could use Changescreen as it has a similar feature, but a standalone like this is more preferable for me...
But I just can't download from Rapidshare...
Is it possible to load the .cab here since its only 345kb? or a mirror to somewhere else...
Anyways, Thanks for pointing this App out...

bulletproof_78 said:
Hi
But I just can't download from Rapidshare...
Click to expand...
Click to collapse
I haven't got any problem downloading

thanks a million bro...
Works like a Charm!!!!

Installed on my TP doesnt seem to work and no progam icon to make any type of changes?

great idea. tried on my Omnia, works fine. but screen powers on only with Power button

installed on my touch pro, but doesnt seem to do anything any ideas, would really like to have it working am on WM6.5 if that makes any difference...
cheers!

Installed on my Diamond
it's ok

After a call is not working so
only works after soft reset.
Anyone same problem? solution?

Thejackal_71 said:
After a call is not working so
only works after soft reset.
Anyone same problem? solution?
Click to expand...
Click to collapse
Same problem here. I have to kill it with task manager and run it again It's faster then softreset...

Hello
how about battery drain pls?

not working on HTC Rhodium (TP2) - also I can't see it in programs, etc. Do I need to do anything else after install?
I got a question are there any options? like on conference call (when using loud speakers - device is upside down), will it ignore the g-off? Because I am not sure what would happend if I would press POWER BUTTON in the middle of the call just to get the screen back ..

Not working in my Touch Pro, too
Using latest WinMobile 6.5.21935.
I also did a softreset after installation!

Mashe said:
not working on HTC Rhodium (TP2) - also I can't see it in programs, etc. Do I need to do anything else after install?
Click to expand...
Click to collapse
You don't see it. But it is there. Go to the Program Files and the directory with the same name. Click once on it, and tune the device upside down. It will switch it off.Not ON again.
You can link to it.
I got a question are there any options? l..
Click to expand...
Click to collapse
No options. no nothing! It does work on my TD 1
origin of g-off display
Beware! I am NOT the programmer. I don't know who is either. I just found it.
btw ChangeScreen has a "display off" option too.

worked on the tilt 2
it needs dot net compact framework 3.5 and then it loads on startup... closing the title bar that comes up doesn't seem to stop it from working. however, having said this, i can't say that perhaps the tilt 2 didn't have the behavior before i installed this... it took me a while to realize that upside down doesn't mean face down, which is what i had wanted. but having said that, turning it upside down works great because you can put it in your pocket upside down (which basically you might do anyway).
also, indeed, to get it back on, one has to push the power button. but that's good in case the device moves out of tolerance for downward position it won't be going on and off unintentionally--except that even after the screen is already off it will keep executing--i know this because it vibrates when the screen goes off as well, and if i take it out of upside down position and then put it back without turning screen on again, it will vibrate again. this said, walking with it in a pocket didn't seem to keep triggering it, so overall this is a really cool hack.
now for figuring out why my t2 doesn't turn its speakerphone on when placed face down during a call (i was thinking face down should always turn the screen off by way of proximity sensor--which does work on my device because during a call holding finger over ear speaker turns off the display--just doesn't turn speaker on). wait... just realized... if it did then it would have to assume that just putting it to the ear should turn on speaker. so, i'd say what we have here is a challenge... integrate the proximity sensing with the g-sensor to always turn off the display when face down on a flat, reasonably level surface-- and during a call turn on the speaker too.
if this can be done, then combined with the g-off existing functionality it'd be really sweet--i wouldn't have to turn it upside down _before_ placing it flat on a table while listening to music. and the proximity could help make it less worrysome to just automatically turn the screen back on when picked up.

worked on the tilt 2
it needs dot net compact framework 3.5 and then it loads on startup... closing the title bar that comes up doesn't seem to stop it from working. however, having said this, i can't say that perhaps the tilt 2 didn't have the behavior before i installed this... it took me a while to realize that upside down doesn't mean face down, which is what i had wanted. but having said that, turning it upside down works great because you can put it in your pocket upside down (which basically you might do anyway).
also, indeed, to get it back on, one has to push the power button. but that's good in case the device moves out of tolerance for downward position it won't be going on and off unintentionally--except that even after the screen is already off it will keep executing--i know this because it vibrates when the screen goes off as well, and if i take it out of upside down position and then put it back without turning screen on again, it will vibrate again. this said, walking with it in a pocket didn't seem to keep triggering it, so overall this is a really cool hack.
now for figuring out why my t2 doesn't turn its speakerphone on when placed face down during a call (i was thinking face down should always turn the screen off by way of proximity sensor--which does work on my device because during a call holding finger over ear speaker turns off the display--just doesn't turn speaker on). wait... just realized... if it did then it would have to assume that just putting it to the ear should turn on speaker. so, i'd say what we have here is a challenge... integrate the proximity sensing with the g-sensor to always turn off the display when face down on a flat, reasonably level surface-- and during a call turn on the speaker too.
if this can be done, then combined with the g-off existing functionality it'd be really sweet--i wouldn't have to turn it upside down _before_ placing it flat on a table while listening to music. and the proximity could help make it less worrysome to just automatically turn the screen back on when picked up.

sorry for the duplicate post above--tried to edit, then hit save by accident
edit... i just tried screenchange and it in theory seems to do exactly what i want, but in practice, with 2.78 and any sensitivity level and appropriate no light option checked, it turns off the display even if there is light (and lots of it to be sure). i hold the device upside down above my head and the display goes off. i'm not covering the proximity sensor. my proximity sensor does work when in a phone call. i tried rebooting. i think the proximity sensor may be off somehow on my device...maybe htc only wants it on in a phone call? i will have to see if screenchange will work right with the device in a phone call... further posts will go over with screenchange.
btw, regarding the forum... its annoying that my edit made a whole new post in the first place.

cool！！！thanks

[Q] Alternative ways to turn screen on/off

Hi all,
I'm wondering if there's any alternative ways to put the Nexus 7 (or any Android device I guess) to sleep/wake it up. I'm thinking something along the lines of an app that forces the touch screen to stay active but turns the display off so you can use touch input to activate wake/sleep.
Might be a bit of a stupid question. The reason I ask is because my N7 is mounted in my car and the power button isn't easily accessible.
Cheers for any tips..

UnitedWeFall said:
Hi all,
I'm wondering if there's any alternative ways to put the Nexus 7 (or any Android device I guess) to sleep/wake it up. I'm thinking something along the lines of an app that forces the touch screen to stay active but turns the display off so you can use touch input to activate wake/sleep.
Might be a bit of a stupid question. The reason I ask is because my N7 is mounted in my car and the power button isn't easily accessible.
Cheers for any tips..
Click to expand...
Click to collapse
Not sure if this helps but I have a case that I bought for my N7 and when I open it and close it the screen turns on and off.
Here it is http://www.amazon.com/gp/product/B0...ASIN=B008D2POAS&linkCode=as2&tag=newyormus-20

MineralGray02K said:
Not sure if this helps but I have a case that I bought for my N7 and when I open it and close it the screen turns on and off.
Here it is http://www.amazon.com/gp/product/B0...ASIN=B008D2POAS&linkCode=as2&tag=newyormus-20
Click to expand...
Click to collapse
Thanks for that but nah, it's mounted in my car dash so a case won't fit..
But that give me an idea.. does sliding a magnet across a specific point on the screen turn it on/off? That's the idea with the smart cases right?

UnitedWeFall said:
Thanks for that but nah, it's mounted in my car dash so a case won't fit..
But that give me an idea.. does sliding a magnet across a specific point on the screen turn it on/off? That's the idea with the smart cases right?
Click to expand...
Click to collapse
Yes,
The magnet is somewhere to the bottom left of the device (i would say to about a quarter from bottom up and on the black contour) . If you can add an sliding magnet (make sure is weak) then you can lock/unlock screen.

Nfc tags dude i wonder if they would work
Sent from my Nexus 7 using Tapatalk 2

I know some kernels can enable touch wake. I imagine it can incorporated soon. On my Galaxy Nexus, there's an app I downloaded that allowed a specific screen swipe to wake the screen.
Sent from my Galaxy Nexus using Tapatalk 2

wyattyoss said:
On my Galaxy Nexus, there's an app I downloaded that allowed a specific screen swipe to wake the screen.
Click to expand...
Click to collapse
What was the app?
Sent from the third Galaxy on the left.

That would be awesome. Do you remember the name of the app?

Gesture Control?

UnitedWeFall said:
Hi all,
I'm wondering if there's any alternative ways to put the Nexus 7 (or any Android device I guess) to sleep/wake it up. I'm thinking something along the lines of an app that forces the touch screen to stay active but turns the display off so you can use touch input to activate wake/sleep.
Might be a bit of a stupid question. The reason I ask is because my N7 is mounted in my car and the power button isn't easily accessible.
Cheers for any tips..
Click to expand...
Click to collapse
Hey man. I used to have an awesome app on my very first Android tab years ago. It would turn the screen completely black (via home screen or notification icon) without actually putting it to sleep. Because it wasn't really asleep, a double tab would turn the screen back on. I CANNOT FIND IT FOR THE LIFE OF ME! Anyway, after reading your question, I searched for an hour, because I could use something like this for my setup in my car.
So, I found something that turns the screen both on and off, and actually works on my N7. Search for Proximity Screen Off. I installed the free lite version, and it works. I found out the screen won't turn on though, unless you disable your lock screen. Play with the settings to your liking.
Oh, and since we don't have prox sensors, you can use your ambient light sensor. Good luck, lmk if it works for ya.

joelhon said:
What was the app?
Sent from the third Galaxy on the left.
Click to expand...
Click to collapse
It's called PGM Nexus. I almost don't want to give up my Galaxy Nexus (but I sadly still plan to) just because of this one app alone...it is so godawful nice to be able to swipe, or simply double tap the screen to fire up the screen. Unfortunately this app apparently requires some deep voodoo to work as its kernel related, and applies strictly to the Galaxy Nexus. I know a bunch of people have already started bugging the developer to make a version for the Nexus 7, I'd suggest piling on. :fingers-crossed:
It's apps like these that make you realize how superior the Nexus devices are at getting really good customized software over other devices.
I do wish there were some other options for the Nexus 7, like using the front camera as a proximity sensor of sorts to detect a handwave, or simply shaking the tablet.

jaycustom said:
Hey man. I used to have an awesome app on my very first Android tab years ago. It would turn the screen completely black (via home screen or notification icon) without actually putting it to sleep. Because it wasn't really asleep, a double tab would turn the screen back on. I CANNOT FIND IT FOR THE LIFE OF ME! Anyway, after reading your question, I searched for an hour, because I could use something like this for my setup in my car.
So, I found something that turns the screen both on and off, and actually works on my N7. Search for Proximity Screen Off. I installed the free lite version, and it works. I found out the screen won't turn on though, unless you disable your lock screen. Play with the settings to your liking.
Oh, and since we don't have prox sensors, you can use your ambient light sensor. Good luck, lmk if it works for ya.
Click to expand...
Click to collapse
Thanks for that! Appreciate it. I'll give it a try when I get home after work and report back.

jaycustom said:
Hey man. I used to have an awesome app on my very first Android tab years ago. It would turn the screen completely black (via home screen or notification icon) without actually putting it to sleep. Because it wasn't really asleep, a double tab would turn the screen back on. I CANNOT FIND IT FOR THE LIFE OF ME! Anyway, after reading your question, I searched for an hour, because I could use something like this for my setup in my car.
So, I found something that turns the screen both on and off, and actually works on my N7. Search for Proximity Screen Off. I installed the free lite version, and it works. I found out the screen won't turn on though, unless you disable your lock screen. Play with the settings to your liking.
Oh, and since we don't have prox sensors, you can use your ambient light sensor. Good luck, lmk if it works for ya.
Click to expand...
Click to collapse
Could you please post the settings you are using? Specifically the light sensor settings. I am having trouble getting this to work properly. Thanks!

Screen Off
gtdRR said:
Could you please post the settings you are using? Specifically the light sensor settings. I am having trouble getting this to work properly. Thanks!
Click to expand...
Click to collapse
Hello. I'm not sure if it helps you, but for turning off screen I use Nova Launcer (alternatively you could use Apex Launcher - as far as I remember, it has gestures in its free version) with Screen Off app by Katecca. I've set Nova Launcher to react to swiping up screen by executing Screen Off app. So I have to turn on screen by pressing button, but to turn off I just swipe up screen.
Best regards,
Artur

Added support for nexus 7 to ProximityScreenOffPro v6.0
https://play.google.com/store/apps/details?id=com.itsme4ucz.screenoffpro

[Q] Strange screen behaviour

I have noticed over the past few days that when my screen is off if I tap the sensor it will turn the screen on and the LED light will also light up (usually 3 taps about 1 second apart).
I have smart stay, air view, and all gestures turned off (except screenshot). Finger print scanner on. nothing set as far as i can tell in any other menu.
Has anyone else experienced this at all? Is this a "feature" to wake the screen up.
It doesn't bother me, just curious. I am going to test on my wife's phone tonight as well and see if hers does it.

Tap what sensor? The one at the top of the phone?

Yes on top of the phone between the ear piece and the front camera.
Interestingly enough I tested on my wifes S5 and hers does not do it. I am curious what app I installed or setting I changed that is making this happen. As of right now I also do not want to reset my phone at this time as it is not a nuisance. I will try to get a video clip of it and post it.

jselden said:
Yes on top of the phone between the ear piece and the front camera.
Interestingly enough I tested on my wifes S5 and hers does not do it. I am curious what app I installed or setting I changed that is making this happen. As of right now I also do not want to reset my phone at this time as it is not a nuisance. I will try to get a video clip of it and post it.
Click to expand...
Click to collapse
Cool.

Here is a quick video of this "feature."

Lodaserves said:
What is cool of that?
Click to expand...
Click to collapse
That a video was to be posted to view of the quirk.

Well I have figured out what was causing my phone to do this. It is in fact a feature of the phone and is called air wake up.
To enable or disable go into Settings>Accessibility>Dexterity and interaction>Air wake up.
I must have at some point enabled this by mistake without realizing it.

jselden said:
Here is a quick video of this "feature."
Click to expand...
Click to collapse
Cool..
I can't added this feature on my phone..