I followed both steps (usb and bluetooth) with no success...
are there any brave persons that are able to sync this device on Linux?
http://synce.sourceforge.net/synce/howto.php (USB)
If yes, could you please tell me which kernel did u use and yours secret tips? :wink:
What's exactly the problem you encounter? I use Raki and synce on one debian machine, but just to connect, show the magicians screen on the pc's screen and copy files between them, not to sync any data (appointments, etc.).
Greetings,
BGK
Which guide did you follow to set it up?
The device is recorgnized by dmesg but i can't connect to it with pppd
Have you tried multisync? It should be the bridge between synce and evolution
I have also successfully used RAKI on KDE desktop (Debian Testing) to connect to the Magician. It transfers files back and forth, with the right iptables masquerading entry (done manually) I can use the Internet, but I cannot sync anything either
I forget exactly what I installed, but everything should b plug&play.
Kernel 2.6.10, Hotplug, Synce-KDE...kernel installed manually, the rest from the Debian dselect program. There are certain things you have to set up with the kernel config.
What distro are you using? Any other details?
Re Multisync; I really do want to get synch'ing going like ActiveSync. I installed it, tried various configs, but I do not get anything in the program... Can anyone else help?
uau, could you please post your software version?
did you pass some arguments to modprobe ipaq ?
uau, could you please post your software version?
did you pass some arguments to modprobe ipaq ?
If you made raki work you should install multisync and the evolution plugin..
it's already in http://www.multisync.org/files/multisync-cvs-snapshot.tar.gz
Hi metnik, sorry for the late reply.
My device is an O2 Mini (aka Magician), information at Settings => System => About, is
Windows Mobile 2003 Second Edition
Version 4.21.1088 (Build 14235.2.0.0)
I did not have to pass any arguments to ipaq module. It did everything auto; I guess it is because of the 2.6.10 kernel.
I have installed Multisync from Debian Testing, and it has SynCE and Ximan Evolution 2 plugins. I have created the synchronization pair with these, but NOTHING happens when I press the "Sync" button.
Raki, on the other hand, works nicely with the USB cable; even the KCeMirror works very nicely (window of the device on your desktop).
The only problem with Raki is the synchroniztion setup errors with "No Synchronizer found for (Contact)..."; i.e. I don't know how to get synchronization working with that either... It really would be nice to have a copy of my address book on my Linux partition somewhere. So far it is only on MS Outlook, which I don't use...:-(
Also, I have bluetooth transfers working between the Mini and my laptop, however, I havent figured out how to get bluetooth working with Raki. It would be rather nice.
Any clues?
I've been trying to get my trinity to work as an USB modem to Ubuntu Linux not succeeding in it. I've gotten the phone say connecting but nothing. Can anyone help me?
I'm sorry if this has been gone through already but I'm surfing with my PDA and trying to find info is killing me with this screen..
BTW I also don't have gps under the settings.. I've upgraded the official ROM. Should I have it?
Thanks to everyone.
I've got the same your problem...
I can't understand ... usually I do it by a rfcomm connection next I use the dev /dev/rfcomm1 like a modem device
con this windows mobile it doesn't work
solution is here....
http://forums.gentoo.org/viewtopic-t-564041-highlight-.html
you should have pand and have to activate remote connections on the phone
so you will be able to navgate by phone trought bluetooth
this is a simple script that I have configured
#!/bin/bash
MACTELEFONO="xx:xx:xx:xx:xx:xx"
echo "connessione a $MACTELEFONO"
pand --connect $MACTELEFONO
dhcpcd bnep0
Hi
Simple question. Before HD2 I had Samsung Spica mad and I'm using there apps like:
EasySMS over WiFi - 100% working on Spica http://www.appbrain.com/app/easysms-desktop-sms-free/org.fireblade.easysms
WebSharing over WiFi - 100% working on Spica http://www.appbrain.com/app/websharinglite-file-media-sync/nextapp.websharing
and Samba Filesharing over WiFi - 100% working on Spica. http://www.appbrain.com/app/samba-filesharing/com.funkyfresh.samba
Gremote doesn't work too. It is strange becouse this app is different that listed above.
Since I have HD2 it doesn't work (and all alternative apps too). Samba see phone in workgroup but can't connect to it. EasySMS & WebSharing get connection timeout when i want to connect.
BTW: When i enter IP adress in HD2 browser i can log in to EasySMS or WebSharing. So what is the problem?
Maybe somebody can fix it? I try many roms (SD and NAND) = problem is on everyone :/
Sorry for bad english :<
we sharing lite works fine for me, enter your ip adress for the hd2 into your computer browser then enter the password
i have also iused other sharing programs without any problems
What ROM that you use?
I know how to use this program, and they don't work. It isn't the router issue cuz i can use that programs on my father LG Swift.
Here: WebSharing - connection timeout - http://screenshooter.net/2156127/ebuwvsv
I have HD2 with MDJ's CyanogenMod 7 v. 2.6 - Gingerbread 2.3.2 ROM, and I have similars problems. All programs like MyPhoneExplorer (can't find phone) Samba Filesharing (identical problem like Lanc1337) doesn't work.
I can't ping phone from computer connected to router. I check all on another router, problem is the same.
Before I have ZTE Blade and all work perfect!
I found ROM where sharing is working!
http://forum.xda-developers.com/showthread.php?t=912427 - all type of sharing is working here!
But i don't like sense -.- So, why this isn't working on all roms? Kernel or rom issues? I would like this to work on CM build...
Try this:
launch terminal and type:
su [ENTER]
iptables -P INPUT ACCEPT [ENTER]
iptables -F [ENTER]
of course [ENTER] mean press ENTER key
Doesn't work. After i enter second and third command i have error:
getsockopt for multiport failed strangely: No such file or directory
Errors is ok - don't worry. In my Ginger this is working for Samba (I'm using MDJ Cyan V2.7 NAND)...
Maybe try this at first (in terminal):
iptables -P INPUT ACCEPT [ENTER]
and after all this try ping your HD2 from computer (try ping -t ip_address to continous ping - it's good idea to ping -t your_hd2_ip from computer to see if and commands helped) and ping your computer from HD2.
Before I put all this my phone isn't visible in LAN (even with ping command). After putting this everything is ok (and ping is working ).
Put here yours output (after all commands) of "iptables --list [ENTER]" please. Maybe I'll figure someting out...
I check all, and:
I must enter commands:
1. su
2. iptables -P INPUT ACCEPT [ENTER]
and start pinging from phone to computer.
After this software like MyPhoneExplorer can connect to phone. If I enter only commands, and don't use ping command, computer can't connect to my phone.
It's very strange....
After enter iptables --list
chain INUPUT (policy ACCEPT)
chain FORWARD (policy ACCEPT)
chain UTPUT (policy ACCEPT)
I check all again from start to end.
I must enter to terminal su,
and start ping, after this i can exit ping, and I can connect to phone, and phone reply to pings. I don't must enter "iptables -P INPUT ACCEPT"
Any ideas for permamently solution ?
UP
Permament solution will be great!
Sorry for spam :/ Is nobody know how to solve this issue?
Bump!
Hi, also have this issue. Doing the iptables command doesnt do anything for me, it just gives me a bunch of errors. In my case it is enough to just ping my computer from HD2 using terminal emulator or other app (I use Net ping) and I can connect to phone via wifi immediately. After phone restarts I have to do that again.
i have just same issue,seems all CM based rom has this problem,anyone has any ideas?
anotherfullbowl said:
i have just same issue,seems all CM based rom has this problem,anyone has any ideas?
Click to expand...
Click to collapse
Not really.... Besides this one I am currently bumping another thread like this in hope that someone will show up with something, at least with a few pointers of how and where to look for the reason of this issue....
clyder said:
Not really.... Besides this one I am currently bumping another thread like this in hope that someone will show up with something, at least with a few pointers of how and where to look for the reason of this issue....
Click to expand...
Click to collapse
Is this problem Only comes with CM roms?Is there Anyone who use CM rom with sharing apps working?
I really like CM roms, it has some good features,but sharing apps also important for me.
how can i unlock my htc hd 2
anotherfullbowl said:
Is this problem Only comes with CM roms?Is there Anyone who use CM rom with sharing apps working?
I really like CM roms, it has some good features,but sharing apps also important for me.
Click to expand...
Click to collapse
Not only CM ROMs. I am using UltimateDroid based ROM and also have this issue. My guess was that it could be related to Gingerbread, but I could be wrong.
Has anyone solved this?
I just found out that by using tytung r6 kernel this issue is gone. When I turn the wifi on, connect to the router I can ping the phone immediately. Also Wifi tethering in settings menu works. I am currently having some issues with restoring apps but wifi works great. I have downloaded r6 CWM install from here.
Hello Xylograph.
First i would like to say "Thank you". You save me a lot of money for a new Android tablet. :good:
I have only one problem: if i would like to connect to my VPN server, NCP VPN (payed version) say "This device is not supported by this VPN client. Access to TUN/TAP interface failed. (Cannot create interface)". With other 4.1.2 ROMs it works fine. :crying:
VPNCilla has the same problem with TUN device. Btw. I use NativeSD version.
meingott said:
Hello Xylograph.
First i would like to say "Thank you". You save me a lot of money for a new Android tablet. :good:
I have only one problem: if i would like to connect to my VPN server, NCP VPN (payed version) say "This device is not supported by this VPN client. Access to TUN/TAP interface failed. (Cannot create interface)". With other 4.1.2 ROMs it works fine. :crying:
Click to expand...
Click to collapse
In ADB shell or Terminal Emulator, type lsmod to see the currently loaded modules. If you don't see tun.ko there, load it by insmod /system/lib/hw/modules/tun.ko
Swyped from HTC HD2 using xda premium
I see following modules:
bcm4329
tun
msm rmnet
I reinstalled the ROM into NAND and now all works fine. It is a NativeSD problem.
Hello,
a couple of days ago i updated my Galaxy S5 from rooted stock Kitkat (Touchwiz) to Cyanogenmod 12 (nightly 26.01. at the moment, recovery is TWRP).
I know CyanogenMod from using it on my Galaxy S2 already.
unfortunately i keep having some network problems..
At first the phone didn't connect to my Wifi. The Router assigns a fixed ip to the phone's MAC-address. I was able to fix that by configuring the Wifi-conection on the phone to the same IP instead of using DHCP.
Wifi works fine now.
Second: My ES-file-explorer FTP-Server isn't working. It starts well on the phone, but i can't access the IP ftp://192.168.178.xx like i was used to from my windows pc. Also if i ping the ftp://ip-address in the command promt i get a "couldn't find host"-error..
-------------------------------------
Third Problem Fixed!! (Had to re-enable "Allow programs on other systems to control XBMC")
Third: My Yatse XBMC / Kodi remote won't find the Host. it is active in the same network and i can controll it with my girlfriend's stock Galaxy S5, but i can't add the host to my Yatse.. Even if i enter IP and Webserver-Port directly the JSON-RPC check fails..
Any advice?
Thank you very much for your Help!!