Hi all, need help here...
i have an apache that cant connect to my pc, it allways shown "USB Device Not Recognized"..
This situation cause by restoring file backup from my other apache wm6.5 to my apache wm6.1 with using SPB Backup..
The result is : my apache cannot detected by my pc for activesync and allways shows "USB Device Not Recognized".. In bootloader mode still not detected by my pc.. "USB Device Not Recognized" in pc screen.
any idea to fix my apache??
thx, tomtim
i think that makes this situation is the difference system between the two OS version.. in the wm6.5 theres a extended rom, but in the wm6.1 no.. The big mistake i've done is replacing standard system with wm6.5 system wich theres extended rom on it..
for info, i allready downgrade my other apache to wm6.1, backup it with spb backup, and then restore it to my apache that has a problem ( with hope that will become normal like previous ), but still same.. "USB Device Not Recognized"
same type, same boot version, same OS ( for now ) but sill no luck.
what do i have to do now..........
Case Closed...
The TX line in PCB were damage.. ( never thought this was the problem )
After repairing the track, all normal again..
Thx to all..
Related
hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!
THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....
your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??
i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?
i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!
SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!
Hello to everybody!
After all I have to say that this is a fantastic forum for users of Qtek S200 (Prophet). I bought one last week and started to see what I could do. Therefor... I'm a newbie
This is my first thread, hope that some one can help.
After trying to understand the world of Prophet, I first changed the ROM to an official Qtek ROM.
Now I what to sincronize with my PC to transfer photos and put some software and apps in the card. Like I read here, I downloaded the activesync from microsoft site, instaled it and plugged the cable to my pda. Nothing happened. Than I went to activesync connections enabled USB connection and tapped in connect. After a search, the pda was simply not found. Even after turning down de AntiVirus and Firewall, nothing happened.
What happened? I have to do something in the PDA? Couldn't find that info in here.
Thank's in advance for the help
Heurd
Does the LED in the speaker at the top change to orange?
Does the computer react at all? (any sounds etc.)
If not, try putting the device into bootloader: Press and hold the COMM button and then soft reset, and then plug it into your computer and see if anything at all happens.
If nothing happens, the USB cable is damaged. If the computer responds when the device is in bootloader but not when it is in, the ROM may not have the required software installed in it.
Hi,
Yes, the Led turns orange. I can charge the battery with that cable. But i also read that it's possible in some cases to charge but the part to syncronize can be damaged!!!
But what really intregues me is that I used that cable to put the ROM that I have. Supposedly it's a Qtek official ROM, i don't know if you can conclude something with this:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.29
In PDA appears the active sync icon and tapping it only appears a window that says to install AS in PC and connect. So I suppose that it has something.
thanks to l3v5y for the sugestion... I will try and than post here what happened.
does anyone has anymore suggestions... I will try everything to put this at work.
In PDA appears the active sync icon and tapping it only appears a window that says to install AS in PC and connect. So I suppose that it has something.
Click to expand...
Click to collapse
This seems to say you haven't successfully installed Active Sync. Try restarting your computer and seeing if it works then.
l3v5y said:
This seems to say you haven't successfully installed Active Sync. Try restarting your computer and seeing if it works then.
Click to expand...
Click to collapse
That is surelly not the problem because I installed AS 4.5, restarted the computer more than once, removed that and reinstalled and nothing... I even had put de AS 4.2 to try and see if it worked - nothing.
Now I'm not in my computer... I will try what you suggested when I go home.
I think it may be something to do with the USB cable...
Had that problem a while ago, my solution was to reinstall windows xp and it worked. so backup your pc, format your hard drive and then install the os (windows xp/vista). i guess it was usb-driver related.
REALLY
Unbelieveble...
well, It's easier to try in another pc before formatting mine. I'm not in the mood (too much time to put like I like)
That way I will check and see if my cable and ROM are allright.
Thanks for the tip croco_64
Hope to tomorrow come in here and wright that it's everything ok
Hi there!
Well... I've tried what you proposed. It is probably a problem of the cable. I tried with a cable of a digital camera and finally the computer detected the phone (with mine it only went orange light in the top, but never recognized - despite I changed the ROM with it ). However it gives an error - the instalation is not complete!!! I went to device manager in the PC and there was a yellow (!) in the windows mobile device.
Is it of the cable!? Do the cable have to have specific properties to sync the pda and the pc? The camera cable isn't enough?
yes... I had put activesync 4.5 in the PC!!!
thanks again for the help
My iPAQ 612 is not recognized on computer
Anyone can help please.... !!
I am using iPAQ612 with somehow I can connect iPAQ612 with any computer with the ActiveSync. It was working smoothly and I haven't connect with ActiveSync for longtime. Couple days ago I was trying to upgrade new ROM and connect with the ActiveSync I found this problem.
I have tried many ways of solving this issue but still not make it solved.
These are what I have tried.
1. I have tried to reinstall ActiveSync and install New ActiveSync4.5
2. I have tried to install new windowsxp on new harddisk and install activeSync4.5
3. I have checked on Setting System "USB to PC" both checked and unchecked
4 I have tried to connect with VISTA and install Windows Mobile Device Center
5. I have tried to unchecked Power / USB Charging
All above I tried T_T still unsolved my problem
Any suggestion can help I'm very welcome.... and thanks in advance.
PS. Can anyone Dump original ROM WM6.0 for me I'm thinking to take iPAQ612 to HP Center but I have to change my rom to original version
otherwise the warranty will cancel.
apichaix said:
My iPAQ 612 is not recognized on computer
Anyone can help please.... !!
I am using iPAQ612 with somehow I can connect iPAQ612 with any computer with the ActiveSync. It was working smoothly and I haven't connect with ActiveSync for longtime. Couple days ago I was trying to upgrade new ROM and connect with the ActiveSync I found this problem.
I have tried many ways of solving this issue but still not make it solved.
These are what I have tried.
1. I have tried to reinstall ActiveSync and install New ActiveSync4.5
2. I have tried to install new windowsxp on new harddisk and install activeSync4.5
3. I have checked on Setting System "USB to PC" both checked and unchecked
4 I have tried to connect with VISTA and install Windows Mobile Device Center
5. I have tried to unchecked Power / USB Charging
All above I tried T_T still unsolved my problem
Any suggestion can help I'm very welcome.... and thanks in advance.
PS. Can anyone Dump original ROM WM6.0 for me I'm thinking to take iPAQ612 to HP Center but I have to change my rom to original version
otherwise the warranty will cancel.
Click to expand...
Click to collapse
Hi,
What ROM are you using now ? Normally, if you install AS 4.5, it will wait for a PPC to connect and then make a new profile etc. Unless something went wrong with your ROM-update.
For the latest ROM from HP, look here
Dirk
try using another usb-cable
Hello
I've got a problem. I want to flash my ROM to WM6.5.
I connectet my Phone with Vista over USB-Port.
The ROMUpdateUtility.exe start the GUI.The phone disconnect from Vista and the Install GUI shows me after few seconds the ERROR 260, that my Phone ist not connectet.
On my Phone I see the three coulored Monitor. On the left lower site is written "USB".
I tried to hold the connection with Vista ( i startet the Camera or other Applikation ) but the same problem.
Whenever i start the ROMUpdateUtility.exe the same. Disconnect and never connect again.
What can i do, that my phone stay connectet with Vista, so the Install GUI can make his work?
thx AcidC ( and sorry for my bad english)
run artemis uspl first
remove any sd card if u have
and then try it
Hi,
we tried with and without microSD card and or sim card.
The real problem is the connection which is interrupted and doesn't rebuild.
Independent of trying to flash the WM6.5 or USPL.
Silly question, but you never know..Do you have Windows Mobile Device Center installed in your PC and is your device connected to it? It is the "Activesync for Vista". The three coloured screen is normal, it is called Boatloader. After that you should have a progress bar of what you are updating (rom,radio..uspl..etc) on both PC and Artemis. In my case, when i got error [260] it's always because I forget to remove the SD card. I know you already tried this but keep it away from device when you flash.Your problem is maybe about Vista Drivers for Artemis, there are threads concerning it. Before you investigate further,try to install/reinstall Windows Mobile Device Center, change USB port and flash with a freshly booted PC. Hope you'll get the magic.
P.S. USPL flash is ABSOLUTELY THE FIRST THING TO DO!
Workaround: try to flash with a PC running XP
You need RUU for vista
Ok. I tried it again, but like u said, i need USPL and WM6.5 RUUs for Vista. But can u help me? I don't find somthing :-(
I consider myself beeing quite lucky for not having needed this even if I'm on Vista,hope helps for you: http://forum.xda-developers.com/showthread.php?t=337097
Use these drivers for Vista:
http://forum.xda-developers.com/attachment.php?attachmentid=33662&d=1169888879
Yeahhh ... Now it works. Thank U all. And now i understand. I had to update my MobileSyncDriver in Vista. Thank U very much
Hello everyone, I have a problem with my HTC Kaiser II with WM 6.1 features:
- Version ROM : 3.29.408.0 ITA
- Date of ROM : 05/07/08
- Version of RADIO: 1.65.16.25
- Version of product: 25.83.40.02H
When I connect it to the PC does not recognize it and show the following message "USB Device Not Recognized".
Can someone help me.
Thanks
More Information may help get an answer.
What Operating System are you using? What sync software? (Activesync? Windows Mobile Device Center? Other?)
WM6.1 is an older device platform. Have you been able to sync with PC before?
If yes, what has changed? (New PC, new OS?)
If you just got this device and have never synced it before, are you sure the cable and socket are in good working order?
The OS used is Windows XP Professional, use Activesync to connect.
I had problems with my Kayser and I had to do a hard reset on it.
Previously I could connect it to myPC.
Thanks for the reply
I hope you had a recent backup to restore from after the hard reset.
I seem to remember hard reset causing that problem for me under XP. You could try uninstalling ActiveSync and reinstalling it.
Microsoft still has it for download if you need a fresh copy:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9e641c34-6f7f-404d-a04b-dc09f8141141
Yes, I restored the latest backup.
I have uninstalled and reinstalled ActiveSync but the problem remains.
Thanks again for your time
Maybe this thread can help you:
http://www.smartphonegurus.com/forums/topic/4697-htc-kaiser-tytn-iis-not-recognized-by-active-sync/
Wrong section. Thread closed.