Hi
During my holidays the internal gps stopped working on my Touch HD. I was using Duttys 6.5 R5 at that time. I noticed this when I wanted to start a tool called GPSed again after some days of not using it (before that, it worked fine and never had problems with connecting or synchronizing). Any tool that use the GPS was not able to connect to the GPS anymore. I tried soft resetting and a hard resetting the phone. All the different programs were able to connect and lock to a GPS signal pretty fast without any problem before.
Now I'm on Duttys 6.5 Leo 2 (flashed the phone yesterday) and there's still no sign of life from the internal GPS. I've used a number of programs to check (GPS Test, HTC GPS tool, google maps, tomtom) to see if any of these programs was able to connect. Non of the programs is able to connect via any com ports (com0 to com9).
Has anybody experienced or heard about similar problems where the internal GPS module just died?
Before I give up and assume that the GPS hardware module is simply broken, is there any way that I can check if the interal GPS is enabled/disabled (for as far as this is possible) or check if it is broken or not?
I've been googling like crazy, but so far I found no solution/advice.
Please advise!
[UPDATE]: I solved the problem by installing Duttys 6.5 Leo 3
Have you downloaded latest data using QuickGPS?
I had a similar problem with GPS on my touch HD. I didn't do a hard reset but I did do a soft reset which did not fix the problem. I used the HTC GPS tool to do a cold start of the GPS and this fixed it.
Hello, i had a similar problem after installing WM6 voip.
I read some post and i found that the problem was with dnsapi.dll in the direcory windows. Try to search in the forum.
I solved renaming this file in dnsapi_old.dll, you can try...after that reboot. If it does not work you can rename again and return to the initial state.
Maury
Fallen Spartan said:
Have you downloaded latest data using QuickGPS?
Click to expand...
Click to collapse
Yes I have. But that does not help anything.
galthop said:
I used the HTC GPS tool to do a cold start of the GPS and this fixed it.
Click to expand...
Click to collapse
I have also tried to work with HTC GPS tool. But the tool is not able to find the GPS. So I cannot restart or log anything.
maury1971 said:
Hello, i had a similar problem after installing WM6 voip.
I read some post and i found that the problem was with dnsapi.dll in the direcory windows. Try to search in the forum.
I solved renaming this file in dnsapi_old.dll, you can try...after that reboot. If it does not work you can rename again and return to the initial state.
Maury
Click to expand...
Click to collapse
This I will have to look into. I have not installed any voip application, and I believe that Dutty also has not inserted any VOIP tool in the ROM that I used. With File Explorer on the phone I'm not able to find the dll file under \Windows\ (That's were it should be, isn't it?). Is it a hidden file?
It's good to know that some of you have had similar problems. That gives me a little bit of hope that I can get this fixed. Maybe I should flash my phone again but this time using a WM6.1 ROM.
Yes, dnsapi.dll is an hidden file you can see it with resco file explorer.
I don't know if your is the same problem...bat if you find the file you can try.
Maury
hdam said:
I have also tried to work with HTC GPS tool. But the tool is not able to find the GPS. So I cannot restart or log anything.
Click to expand...
Click to collapse
where can I get this HTC GPS tool, please. google yields just crazy links...
edit:
got the tool now. how can I reset GPS receiver, or something like it?
swoop_xda said:
where can I get this HTC GPS tool, please. google yields just crazy links...
edit:
got the tool now. how can I reset GPS receiver, or something like it?
Click to expand...
Click to collapse
Here: http://forum.xda-developers.com/showthread.php?t=360477
Related
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Another forum member had this same problem when installing the ClearVuePDF Reader also supplied by o2 as part of the HTC application suite. He has the MDA, but flashed with the o2 Exec ROMs and then installed in Corporate mode.
From work we did together, it appears to be just the install program that was not validating his device. When I tried a hard-reset and Corporate mode install, I had no problems installing. However, its beginning to look as though a hard-reset does not totally clear the Exec's memory. In his case, I found all the individual files and registry settings needed for ClearVuePDF to run and he copied those to the device. Runs perfectly for him like that.
So I'm afraid you'll have to find somebody with the o2 version of GPSMonitor installed and get them to determine all the files/locations and registry-settings needed to get it to run. Unfortunately I don't have a GPRS connection or GPRSMonitor installed.
Just a thought. Have you yet tried a full o2 Personal mode install on your device? It just might be this action that puts 'something' in memory that is not cleared by a hard-reset, and that 'something' might be what the install program is looking for.
Sorry that I can't be more helpful.
No problem thanks for your help
dazzled said:
I cannot install GPRS Monitor from myO2 CD, it says i need to update my ROM, i did a corporate install btw
Anyone else had any probs?
Click to expand...
Click to collapse
I did a basic install and I get the same error. Sorry, Not much help though.
Daz
Me too. The ClearVuew PDF reader is rubbish! Text misalighed all over - Adobe with pixel doubling is better than this.
Please try this
Could one of you having a problem to install the o2 supplied GPRSMonitor, please try installing the attached .CAB after copying it to your device.
This CAB is extracted from the CD-ROM install program, so hopefully skips the validation stuff. With luck you might be able to get around the failed validation by installing from this CAB.
Note: Even if asked to install to Storage Card, the o2 supplied version (2.3.0 build 600) puts very little there, most goes into device memory. The current version 2.41 from spb will obey the instruction to install to SD-Card, but wasn't reliable when run from there - the monitoring part aborted four times in 10-minutes whilst I was playing with it.
Unfortunately, since I don't have the install problem, I can't test this install out.
It works a treat. Thanks muchly!
Ward said:
It works a treat. Thanks muchly!
Click to expand...
Click to collapse
Am I glad about that - I was in the midst of trying to locate all the files/registry entries needed for a manual install.
Perhaps I can go to bed now! :wink:
I also managed to 'locate' another copy and it works fine, thanks for all the help.
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Tron_Of_Borg said:
astage said:
However, its beginning to look as though a hard-reset does not totally clear the Exec's memory.
Click to expand...
Click to collapse
I can confirm this but with other files. After several hard resets (even with the clear storage icon), the pictures I had taken were still there.
Click to expand...
Click to collapse
Ouch! I didn't realsie it was as bad as that.
The situation is made worse by the backup program I'm using (Sunnysoft Backup Manager) not backing up all the data and settings. Neither does it perform a true restore - just merges the backup with what's there after the hard-reset.
Unfortunately, I'm used to HP's backup applet from the Jornada 928; which performed a total backup/flush restore. Are there any other applets for WM5/universal that really performs a full backup/restore?
Does anyone have this cab please? I have just bought a new O2 exec and am having the same problem with it saying my ROM version is too old!!
sorry ignore that post! Work computer blocked the file out
I am running my XDA EXEC in basic mode. When I tried copying the .cab file to my device and running it from there , still get the problem.
Any suggestions ?
I was running personal mode then switched to basic mode, could this cause the problem.
Thanks for you replies in advance.
Cannot remove GPRS monotr app
I installed this file to test it out om M3000. Unfortuntely I cannot seem to uninstall it now! It doesnt show up in my Program list - How do you uninstall it?
I looked in the \\windows folder and removed all files and shoretcuts I could find, but its still showing up on my 'today' screen with an error.
Any ideas? The registry?
Cheers
rob
Linuxgeek:
I was also getting the ROM version problem installing programs to my SD card on my O2 exec. Since I'd only just added the card and was running the basic installation, I did the following:
1) Hard reset
2) Personal Install
3) Re-install ActiveSync on PC
This did the trick. Thankfully I like the Personal install best anyway, but I don't know if that step was necessary.
Tried it. Still get the problem :-(
My mistake - I managed to install the Clearvue PDF program, not the GPRS monitor program. I'm still getting the ROM version error with the GPRS monitor program, but I've not tried the above download yet.
Anyone got any other ideas to fix this problem.
Shame O2 don't have an update to fix this problem on their website.
I've now tried the CAB posted above by astage and I can confirm it worked for me. Just copy the CAB to your device and then open it to start the install.
Since I changed my rom to FixixNover 3.3 my Trinity keeps changing the time zone without any explanation.
I searched the forum and tried various solutions but none worked.
I have the "Automatic change time zone" disabled and I haven't used Active sync for some days and today it changed the time zone 3 times.
Is this a problem of this Rom or is it a problem of WM6.1?
I never had this issue when I had WM5.
Anyone can help me solve this issue or knows of a ROM that doesn't have this problem?
check if u install any software that effects time zone.
Flash the ROM again, do not install any program , see if you still have this problem.
motag4 said:
Since I changed my rom to FixixNover 3.3 my Trinity keeps changing the time zone without any explanation.
I searched the forum and tried various solutions but none worked.
I have the "Automatic change time zone" disabled and I haven't used Active sync for some days and today it changed the time zone 3 times.
Is this a problem of this Rom or is it a problem of WM6.1?
I never had this issue when I had WM5.
Anyone can help me solve this issue or knows of a ROM that doesn't have this problem?
Click to expand...
Click to collapse
The new IGO 8 navigation software can change time zone.
Laci30 said:
The new IGO 8 navigation software can change time zone.
Click to expand...
Click to collapse
That's right!!!
I even return to my original WM5 just for test. Everything works fine, ajust the hour and time zone, but after install iGo8, the time zone change everytime I use the software.
Babaloo said:
That's right!!!
I even return to my original WM5 just for test. Everything works fine, ajust the hour and time zone, but after install iGo8, the time zone change everytime I use the software.
Click to expand...
Click to collapse
try modify sys.txt in igo8 folder on sd,
copy this to sys.txt
[timezone]
sync_os_timezone=0
reset_os_timezone=0
this is little bug of IGO8,
I installed iGo 2008 a few days ago. Maybe that's what's causing this.
I'll try that and let you know.
Thanks for the tip.
Try this.
Hope this helps.
it doesn't go......when you use IGO8 and TOMTOM automatically the hour changes to GMT+2....but keep the local time, once you reset the phone or pass a long time....phone detects you are in GMT+2 and less 1 hour. The two solutions proposed DONSN'T GO....i think it something with the Satellites and the configuration of the navigators. Satellites have an internal clock that is configurated to GMT+2.
Go on searching any solution
sanhel said:
it doesn't go......when you use IGO8 and TOMTOM automatically the hour changes to GMT+2....but keep the local time, once you reset the phone or pass a long time....phone detects you are in GMT+2 and less 1 hour. The two solutions proposed DONSN'T GO....i think it something with the Satellites and the configuration of the navigators. Satellites have an internal clock that is configurated to GMT+2.
Go on searching any solution
Click to expand...
Click to collapse
http://marathonclub.sk/sys.rar
download this archive, unrar it, than copy sys.txt to storage card/igo8 folder (must overwrite existing)
http://www.navngo.com/pages/global/eng/igo_8_support_faq/
I don't know why, but it's solved after I delete "welcome center" ,when I cooked my new rom.
Laci30 said:
http://marathonclub.sk/sys.rar
download this archive, unrar it, than copy sys.txt to storage card/igo8 folder (must overwrite existing)
http://www.navngo.com/pages/global/eng/igo_8_support_faq/
Click to expand...
Click to collapse
Tried this but the problem continues.
Everytime I use iGo2008 the timezone changes to +1 Prague...
I like iGo2008 very much but until this is solved I'll have to find another gps software. I don't remember having this problem when I had TomTom.
you need to make the sys.txt modification on the device program files folders as well. Trust me it works!
mohamedmall said:
you need to make the sys.txt modification on the device program files folders as well. Trust me it works!
Click to expand...
Click to collapse
right！！！
Yes!!!! That's it you have to change it in the both files.
Thank you!!!
Please help, I have the same problem... but on my device there is no 'iGo 8' folder, but only on my SD card... and I modified the sys.txt file, and nothing.
I have iGo 8.3.2 on the HTC Diamond2.
Help
Laci30 said:
try modify sys.txt in igo8 folder on sd,
copy this to sys.txt
[timezone]
sync_os_timezone=0
reset_os_timezone=0
this is little bug of IGO8,
Click to expand...
Click to collapse
Thanks! It worked for me!
jakylee1 said:
right！！！
Click to expand...
Click to collapse
Hello,
I have the same problem, I am using IGO8 and have it on an SD card.
I have modified the sys.txt in the igo8 folder, where else do I need to modify?
In the display of my autoradio, the time changes every 5 seconds randomly...
Can you please help?
Thanks
After hard reset I am able to use TT7 and Google maps with GPS for two days and then the GPS cannot be found. I installed the Nadavi_HTC GPS tool from the Polaris forum and again the GPS cannot be found.
I’ve read elsewhere in this forum that other people are having the same problem yet the tread just stopped with no solution.
I have no GPS problems with both my Polaris and Diamond.
Anyone have any idea’s or suggestions?
Same issue...
And unable to download A-GPS update (download up to 77% than says "connexion fails. Please try again later") - updating was OK (and GPS also OK) last week :-(((
Other users have the same problem on the french forums...
eyaeya said:
And unable to download A-GPS update (download up to 77% than says "connexion fails. Please try again later")
Click to expand...
Click to collapse
That's a general internet connection error. Is the device set to use a proxy?
Hard Reset the device and the same fault developed after two days.
No one else having the same problem??
Hmmm, seems odd that it's after two days (i.e. a time limited thing)
Have you tried turning off assisted GPS and then resetting again?
It's just that the assisted GPS thing does have a time limit on it
arfster said:
That's a general internet connection error. Is the device set to use a proxy?
Click to expand...
Click to collapse
I doubt it's an Internet connection issue, because it was perfectly working last week, and all the other Inetrent-enables apps (Meteo, Opera,...) are working.
It's more like a driver ou dll issue, that prevent the OS from communicating with the GPS. It would explain both with the GPS is not working, and why the a-GPS update can't be done (my guess is the upload of the ephemeris from the net to the app is done correctly, but that the app cannot upload it to the GPS)
Thanks eyaeya, I think you could be onto something...I read in another post that there could be a conflict between the VoIP drivers and GPS drivers. Have reset the phone yet again and will wait and see..
Update and GPS is operating for the time being.
Digging the system...
I did a full backup, and a hard reset : the QuickGPS HTC app (A-GPS ephemeris downloading) is working, as well as VisualGPSCe (both were not working before the hard reset).
Restored the backup : both are not working again :-(
Open the registry : found 87 instances of "GPS"... I'm going to check the values in the 2 version of the registries... maybe we'll have a clue ! And if not, I'll check the windows/systems files. If I don't find something, I'll reinstall all the apps one after the other anc will check the GPS functionnality after each (BTW, thanks for the VoIP driver tip : I've installed Skype, Fring, SJPhone Beta, WM6oIP,SIPCOnfig 2.0.1, so one of them may be fooling me around)
Will keep you updated...
-update 1-
I've been quickly comparing the registries with Word.. haven't found any valuable information yet
I also compared the\windows directories with winmerge (which does a binary comparison) : some differences, but nothing linked to a driver or dll...
I'll try to restored the backup set (the one I did after the hard reste) to see if it makes the GPS working, or if I have to go through a hard reset again (which would mean the issue would be somewhere in the chip itself, or in some non-volatile mem...)
-update 2-
I've being paying with backups forth & back... If I restore the backup I did after he HardRest+few programs installed, the GPS is working again. SO I just have to find what in the bakcup is making it work again => system file ? registry key ?
Anyway, it shows that we should be able to restore the GPS function without going through a HardReset.
-update 3-
I tried to restore the backup I did before my first hard reste, but without the registry - after that the HTC asked me if it should activate some .exe and .dll (including the VoIPcanvas.dll) ; tried the GPS (with visualGPSCe) : didn't work :-(
I was wondering if some GPS dll could have been modified in the restoration process. There are a bunch of files that deal with GPS :
\Windows :
CleanGPSData (exe?)
CleanGPSData
GPS-icon (icon)
gpsapi
GPSAux
GPSAux.dll.040C
gpsdriver
gpsid
gpsid_HTC
mxiupdate_PA... (4 files)
QGPS_BUT_L (icon)
QGPS_BUT_L2 (icon)
QGPS_BUT_P (icon)
QGPS_BUT_P2 (icon)
QuickGPS
QuickGPS.Exe
QuickGPS (Htlm file)
QuickGPS
QuickGPS_help
However, I couldn't find them in the backup file (I use SPB Backup, which I recommend : you can extract all the files and registry from the backup set to your hard drive). Went to the HTC with resco explorer (you need to deactivate "hide system/Rom files") : those are ROM files, so they are not modified in the restoration process...
--update 4--
Did the same restore as above (update 3) but without accepting the .exe and .dll (warning at loggon) : GPS still not working. I ran "\windows\CleanGPSdata" : GPS still not working.
I found were the ephemeris are stored : \windows\xtra.bin (the registry keys are under [HKEY_LOCAL_MACHINE\Software\HTC\QuickGPS] : "folder"="\\Windows\\", "path"="", "EEFile"="xtra.bin"). I'm going to play with those, and check they are not corrupted.
--update 5--
I managed to have the GPS working again ! This involved resetting the registry (ie installing the one I backuped after the HardReset), deleting some files (\windows\xtra.bin, GPSLogFile.txt, GPSLogFileBack.txt), desinstalling TomTom as well as all the other VoIP apps, and rebooting.
I'm going to try to reproduce
--update 6--
I've been able to have the GPS working again, without any restoring, just by deleting/modifying some registry entries, deleting some files, and de-installing some progs. Looks like the VoIP functionnality is the one that was messing everything (check if you have VoIPphonecanvas.dll).
Will try to dust my procedure, to remove unecessary steps, and I will post i here
Just to give some hope to those having a GPS issue
Up. Just to give some hope to those having a GPS issue.
ayaeya, looks like you have put in a lot of effort to help us out. Thanks!
My GPS has worked fine for the last few days. I did not install the VoIP program or Skype.
I have attached the VoIP cab that I used on the HD whiched worked fine on my Diamond and Polaris. Both phone do not suffer the same fault.
The only other program I have installed in TomTom 7.4 and I installed Google Maps directly from Google and did not use the version which came with the phone.
easy solution
Had the same problem. Am very grateful for eyaeyas solution. Tried deleting
\windows\xtra.bin, GPSLogFile.txt, GPSLogFileBack.txt. Still no success. Found another copy of xtra.bin in /temp and deleted it. Immediate success!!
So, to recap:
Delete following and soft reset:
\windows\xtra.bin
\windows\GPSLogFile.txt
\windows\GPSLogFileBack.txt
\temp\xtra.bin
(actually, it seems like the problem lies in the two instances of xtra.bin, which, I think, contains ephemeris information, so maybe it is enogh to delete these)
Remember to get new ephemeris file (fast gps) to speed things up.
mikdyb
i'm facing the same problem
suddenly gps stopped functioning
quick gps can't be updated and garmin can't find gps device
com port is set to 4
i follow the instructions and deleted this files and soft reset but no luck
\windows\xtra.bin
\windows\GPSLogFile.txt
\windows\GPSLogFileBack.txt
\temp\xtra.bin
any other options :S
i also have problem with GPS on my HD..
I was using Igo8 and everything was fine...
but in one moment its stoped working..
Igo find gps on port 4 but no signal no satelites...
what to do?
works great
http://forum.xda-developers.com/showthread.php?t=596682 . d
Hi.
I am having some trouble with my LEO!
When I try to enable bluetooth trough comm manager, I recive a message that says "can not enable bluetooth".
When I am going on advanced settings menu and touch the bluetooth icon it gets highlighted but nothing happends. All others connections and icon do work perfect.
I have had my device for 3 days, and have never tryed bluetooth on it before. I have stock ROM on it.
Hope that someone can help me with this problem.
Sorry for crappy english! =)
Do you have TomTom installed on your machine? That navigation software can screw up the Bluetooth stack on the HD2 by installing and overwriting WM stock bluetooth files...
Drakknar said:
Do you have TomTom installed on your machine? That navigation software can screw up the Bluetooth stack on the HD2 by installing and overwriting WM stock bluetooth files...
Click to expand...
Click to collapse
Yes, I have tomtom installed. Is my only option hard reset, and never use tomtom again?
When device is starting up I got a warning: BTTrayCE.exe is not a valid pocket PC program.
Any ideas?
It's very simple to fix this:
remove BtCoreIf.dll from Windows folder and softreset.
ghale said:
It's very simple to fix this:
remove BtCoreIf.dll from Windows folder and softreset.
Click to expand...
Click to collapse
Thank you so much! It is working perfect now! =)
You're welcome.
Same problem, trying to apply the same solution, but can't delete the file. I've tried with Total Commander but it says it can't! Any ideas what the 'user error' here is?
Please check if the attribute of the file is ROM.
If is ROM, then you have the original file.
If ROM is not set, then try to soft-reset the device then with the native file manager choose "Show all files" and delete the file.
Then soft-reset again.
It is read only, system and in ROM according to Total Commander. The native file explorer has now lost the delete option completely! Properly stuck now!
It's a normal behaviour of the file Explorer. You can't delete a ROM file.
You have the original file.
Try to delete BTTrayCE.exe, then and then restart.
It will be restored automagically.
Let me know.
That is also a ROM file and won't delete.
Ah!
I don't know, then, what is the problem.
What type of issue you have on your mobile?
Exactly the same as the OP, when the phone starts it has a Bluetooth Error, then won't start Bluetooth.
Ok, but you can write what message you see, exactly, please?
paulrockliffe said:
Exactly the same as the OP, when the phone starts it has a Bluetooth Error, then won't start Bluetooth.
Click to expand...
Click to collapse
Factory reset will fix it, and was for me the only way to get it to work again.
For fun.. Try your FM radio. It does also not work anymore!
Sorry, I can't help you, then.
Yes, unfortunately in some cases it's impossible to delete the files modified by the TomTom install. At first I have done a hard reset, too; then I prepared a modded TomTom CAB file without the BT drivers so that now everything works fine. If you should need it, I can upload it somewhere.
Hmmmmm! I'm not going to run a factory reset until I can put HSPL and a modified ROM, it's a pain not being able to use my bluetooth headset, but not worth the hassle of reinstalling everything. While I'm waiting I'm going to try out loads of other bits of software and workout how to use Sashmi etc to make it much easier to restore everything when I change ROMs.
Drakknar, if you could upload that file somewhere that would be useful, not just for me I'm sure. Maybe email it to the guy who's doing the hints and tips thread to attach it to that perhaps?
I'd be glad to share the link with everyone, but I think that posting a link to TomTom Cabinet in XDA-Dev would be against the rules. If it's allowed, I'll send the link to the author of the tips n tricks post, otherwise I can send a PM with the updated .cab to those who are interested
Drakknar said:
Yes, unfortunately in some cases it's impossible to delete the files modified by the TomTom install. At first I have done a hard reset, too; then I prepared a modded TomTom CAB file without the BT drivers so that now everything works fine. If you should need it, I can upload it somewhere.
Click to expand...
Click to collapse
maybe renaming the file will work?
i don't know how this happened.
i did run android but after that i removed it and i installed a standard rom from the htc support site.
can it be that it's still affected by android or is this something else?
my hd mini says that he can find the internal gps receiver but can't find the satellites.
i got the program port on com 4, the hardware port off and the rate on 4800, so did i used the wrong port or wrong settings.
b.t.w. when i start up my phone it says tctrayapp.exe can not be opened. i don't know if that is necessary information,
jappper said:
i don't know how this happened.
i did run android but after that i removed it and i installed a standard rom from the htc support site.
can it be that it's still affected by android or is this something else?
my hd mini says that he can find the internal gps receiver but can't find the satellites.
i got the program port on com 4, the hardware port off and the rate on 4800, so did i used the wrong port or wrong settings.
b.t.w. when i start up my phone it says tctrayapp.exe can not be opened. i don't know if that is necessary information,
Click to expand...
Click to collapse
try removing the sd card,format it,install the ROM again (better without the sd card in phone)
there are still some settings on card from android which doesnt let windows mobile to find satellites,this is a known problem...
"Known issues:
-GPS software in WM will not find satellites if you turn off GPS from location settings in Android "
tzacapaca said:
try removing the sd card,format it,install the ROM again (better without the sd card in phone)
there are still some settings on card from android which doesnt let windows mobile to find satellites,this is a known problem...
"Known issues:
-GPS software in WM will not find satellites if you turn off GPS from location settings in Android "
Click to expand...
Click to collapse
i did formatted the sd card after i removed android but is it necessary to do it also with the overwriting program that i also needed to use before the android ROM.
thank you for your help
jappper said:
i did formatted the sd card after i removed android but is it necessary to do it also with the overwriting program that i also needed to use before the android ROM.
thank you for your help
Click to expand...
Click to collapse
yes
if u format using phone software the data will not be deleted,will be just hidden...
i tried ti but it didn't work. i tried a gps fix and that said gps starting up and it didn't went further.
jappper said:
i tried ti but it didn't work. i tried a gps fix and that said gps starting up and it didn't went further.
Click to expand...
Click to collapse
hmmm,then put on card android again,enable gps(instructions in my link),test on WM,and after u can delete android if u dont want it
i don't think that's the problem i formatted the sd and i did a hard reset and installed a new rom so i think it should be out of the system already.
i dont know if the settings of the ports depends if it's working or not or that tctrayapp what i mentioned before?
well...as i said this is a known issue,many had this problem and they solved it doing what i said above..if you know better then do it your way and don't ask us!
gps
Hello.
Android get back to SD. Start Android , go to settings / position / (on) or Disable using GPS satellites. Restart WM6.5 and it works.
i tried it and it didn't work. i turned it off, turned it on and off, but it didn't work does anyone have another idea what it could f be
have you tried the changes, what I said above, on the Android or Windows Mobile? Odd, I had 3 HD MINI ALL THE SAME PROBLEM WITH YOUR and all resolved the problem.
oregon69 said:
have you tried the changes, what I said above, on the Android or Windows Mobile? Odd, I had 3 HD MINI ALL THE SAME PROBLEM WITH YOUR and all resolved the problem.
Click to expand...
Click to collapse
i shall try it again, i need to put it on again because it says it has an uknown certificate and that i can't open it
i tried it and it worked i needed to turn those things on in stead of off so i want to apologize to them. thanks everyone for your help