Well as the title says i bricked my phone
it hapened when i tried too gain root with a (whitch i didnt know at the time) obsolete guide described here http://theunlockr.com/2009/07/08/how-to-root-your-htc-magic/ i did all that it said should bee done but now when i boot i only get too the htc magic screen and it freazes there
since it is a software issue it MUST bee posible too reflash it with a workin rom or something like that but all methods i have tried have failed to help me and i have tried numerous both methods and img's and update.zip's
soo if you have sugestions (or better yet a solution) please post as a maniac
sincerest NoaT
What device do you have and what ROM did you flash? In recovery, did you you do a backup?
stupid me
origins81 said:
What device do you have and what ROM did you flash? In recovery, did you you do a backup?
Click to expand...
Click to collapse
i used the rom provided on the page and no i where stupid/cocky enough to not make a backup
after it didn't work i tried several ather rom's (thinkin it might have been a baad rom to start with)
but i where thinkin (after reading this thread that maybee i could fin the .img files hee mentions too re-flash somewhere on the web, but no luck so far
Go into fastboot mode and tell me which board you have by rebooting and holding down the Back button and pressing the Power/End Call button
PVT32B use this recovery image here
and any of these SPL's found here and any ROM labeled 32B
PVT 32A use this method and recovery image here and any ROM labeled 32A
Connect to pc via USB
fastboot boot (enter recovery here).img
Unplug from USB
Apply update.zip from the menu list
origins81 said:
Go into fastboot mode and tell me which board you have by rebooting and holding down the Back button and pressing the Power/End Call button
PVT32B use this recovery image here
and any of these SPL's found here and any ROM labeled 32B
PVT 32A use this method and recovery image hereand any ROM labeled 32A
Click to expand...
Click to collapse
i have the 32a model, but first of what is this spl thing and is it not nessesary for the 32a model?
and second of if it is could you post a link to that aswel and maybe a guide on how to flash spl's (like can i put both the spl and the rom on the flash drive at the same time and save the whole proces of takin the sd out of the phone to transfere files to it?)
thanks already NoaT
If you need root then you NEED the SPL. All links are provided in my last post. Follow the instructions for the 32A device
Yes you can put both the SPL and ROM on the same card at the same time, make sure you label them differently like update1 for your SPL first and update2 for the ROM. Use choose update option in recovery in the menu list in order to see both
origins81 said:
If you need root then you NEED the SPL. All links are provided in my last post. Follow the instructions for the 32A device
Click to expand...
Click to collapse
werry well thx alot ill get right hackin, ill let you know if it works
THX
WoW thx alot for the great help!!!
i tried this rom because the rom frome the tutorial didnt work and now it's workin (still have no clue what went wrong the first many times...?)
but do you know a way to check if i have root already?
Go back into fastboot and check whether security is off S-OFF, well you already flashed a custom ROM so that's indication there
Great it worked out
Cheers
origins81 said:
Go back into fastboot and check whether security is off S-OFF, well you already flashed a custom ROM so that's indication there
Great it worked out
Cheers
Click to expand...
Click to collapse
YEA thx alot your the MAN
Related
Hey XDA
Im having a little problem with my Magic.
I would like to flash a new ROM, but i cant get into the recovery menu.
Here is what i do:
I have installed the latest version of SDK on my computer.
I then connect my Magic with the cable, and when Vista comes up with the note saying that want to install the software i tell it to use the drivers that are in the SDK/usb_driver/x86 folder.
I then turn off the phone, and press and hold back button + power button until the phone shows the "3 androids on skateboard" menu.
Then on my computer in the cmd prompt i write: fastboot boot recovery.img, and the the cmd prompt says: <waiting for device> and the nothing else happens, the recovery image dosn't show up on the phone either.
I have checked with adb devices that my phone is connected.
Are there anyone that can help me with this problem because its beginning to annoy me alot, i would like to root my phone and flash another ROM.
So any help would be much appreciated.
Per
Just to check, you made sure you have a spl that's rootable?
http://forum.xda-developers.com/showthread.php?t=529019
And fallowed this before fastboot.
First, setting up your PC (I'm going to assume you're using windows for this) to work with Android in a debugging enviroment.
1. Get the latest Android SDK from here (http://developer.android.com/sdk/1.5_r2/index.html) and unzip it into a convienent directory (most people use C:\Android\, so I suggest you do the same). The result should be something along the lines of C:\Android\android-sdk-windows-1.5_r2\.
2. Set up your phone to work with debugging drivers. The method of doing so can be found here (http://developer.android.com/guide/...ing/device.html) in the "Setting up a Device for Development" section, steps 2 and 3. To test that it works properly, open up a command prompt and navigate to the tools directory (C:\Android\android-sdk-windows-1.5_r2\tools). Type into the prompt:
Code:
adb devices
If it returns your device and serial number, then you're all set.
3. Lastly, grab fastboot.exe from here (http://www.htc.com/www/support/android/adp.html) and place it in the tools directory of the sdk.
Next up, rooting.
Clinton
Thx for the answer, but there is a problem with one of the links you posted, the last one of them (http://developer.android.com/guide/...ing/device.html). it dosn't work.
But you also write something about the SPL, i dont know if i have the right SPL, how can I see if its the right one i have? I've tried reading the link about the SPL, but my problem is that i cant even get into the recovery menu, so i cant flash a new SPL either, or am i wrong?
Please help me
Per
To check your SPL just boot up fastboot (back + power) then just look at the top and see what it says. Then check on the first link I posted and see if your SPL is rootable or not.
Don't know why the last link didn't post proper Here it is.
Clinton
perevers said:
Hey XDA
Im having a little problem with my Magic.
I would like to flash a new ROM, but i cant get into the recovery menu.
Here is what i do:
I have installed the latest version of SDK on my computer.
I then connect my Magic with the cable, and when Vista comes up with the note saying that want to install the software i tell it to use the drivers that are in the SDK/usb_driver/x86 folder.
I then turn off the phone, and press and hold back button + power button until the phone shows the "3 androids on skateboard" menu.
Then on my computer in the cmd prompt i write: fastboot boot recovery.img, and the the cmd prompt says: <waiting for device> and the nothing else happens, the recovery image dosn't show up on the phone either.
I have checked with adb devices that my phone is connected.
Are there anyone that can help me with this problem because its beginning to annoy me alot, i would like to root my phone and flash another ROM.
So any help would be much appreciated.
Per
Click to expand...
Click to collapse
Sound like you're not using the right Recovery .img
Check here to start with: http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking#sec03
ClintonH said:
To check your SPL just boot up fastboot (back + power) then just look at the top and see what it says. Then check on the first link I posted and see if your SPL is rootable or not.
Don't know why the last link didn't post proper Here it is.
Clinton
Click to expand...
Click to collapse
I have the: SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
If what im reading at the first link is correct, my SPL cant be root'et, or im not reading the first link correctly?
And if i need a new SPL, how do i flash that one? and what SPL should i choose? and last, how can i then get my SPL back to how it is now if i need to get the phone to repair?
Per
antonram said:
Sound like you're not using the right Recovery .img
Check here to start with: http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking#sec03
Click to expand...
Click to collapse
I am using the right recovery image, i also tried the one you linked, that didn't work either
Per
perevers said:
I have the: SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
If what im reading at the first link is correct, my SPL cant be root'et, or im not reading the first link correctly?
Per
Click to expand...
Click to collapse
Afraid your not going to be able to root right now. It's in the works though so it might be soon.
Clinton
ClintonH said:
Afraid your not going to be able to root right now. It's in the works though so it might be soon.
Clinton
Click to expand...
Click to collapse
Damn, thats a load of ..... (sorry).
I have just got my phone back from the repair shop because the camera restarted the phone everytime i tried to use it. Before i sent it to repair i had no problem rooting it or getting in the recovery menu.
But can you tell what the problem is? is it because the recovery image dosn't work with my SPl and the recovery image guys need to "crack" my SPL first or what?
Per
perevers said:
Damn, thats a load of ..... (sorry).
I have just got my phone back from the repair shop because the camera restarted the phone everytime i tried to use it. Before i sent it to repair i had no problem rooting it or getting in the recovery menu.
But can you tell what the problem is? is it because the recovery image dosn't work with my SPl and the recovery image guys need to "crack" my SPL first or what?
Per
Click to expand...
Click to collapse
Here you go read This on the SPL. By the way which phone do you have? Is it a Rogers Magic? Just good to know what's not rootable, you should post your phone details in that thread if it's something not listed on the first page.
Clinton
ClintonH said:
Here you go read This on the SPL. By the way which phone do you have? Is it a Rogers Magic? Just good to know what's not rootable, you should post your phone details in that thread if it's something not listed on the first page.
Clinton
Click to expand...
Click to collapse
Its a HTC branded magic, dont know if its a rogers. But im from Denmark, and bought it in Denmark. dont know if that helps.
Thx for the help, will read the thread.
Btw. can you tell where i can see how far they are in "cracking" this SPL?
Per
htc magic stuck in htc magic boot screen, it keeps rebooting after playing the htc welcome sound.
it was not rooted before & i have no backup room. fastboot can't recognize the device
C:\SDK_15\tools>fastboot devices
< waiting for device >
all the drivers are installed
is there any chance to recover it?
by any chance you got your phone from Smart Telecom in Manila? Rockwell? White HTC Magic?
I dont want to open one more thread so I'll share my doubt here.
I've bricked my Magic and I supose that warranty doesnt cover it. What about if I drop my magic, for exemple, and send it to HTC ? Would they fix it ?
octupusisonfire said:
I dont want to open one more thread so I'll share my doubt here.
I've bricked my Magic and I supose that warranty doesnt cover it. What about if I drop my magic, for exemple, and send it to HTC ? Would they fix it ?
Click to expand...
Click to collapse
If they find out it was due to rooting they will charge you for any repairs. If not, then you are lucky and you get a free repair
chinang said:
by any chance you got your phone from Smart Telecom in Manila? Rockwell? White HTC Magic?
Click to expand...
Click to collapse
white htc magic mate. so is there a chance to recover it?
were you trying to root, install rom, update recovery, radio ect ect ??
can you access recovery?
this happens when installing a 32b/g1 rom and forgetting to install the port file.. did that happen?
digitaljeff said:
were you trying to root, install rom, update recovery, radio ect ect ??
can you access recovery?
this happens when installing a 32b/g1 rom and forgetting to install the port file.. did that happen?
Click to expand...
Click to collapse
yes i can access recovery mode but there's no options in there
in fastboot mode,
Does it appear fastboot USB ?
jgcaap said:
in fastboot mode,
Does it appear fastboot USB ?
Click to expand...
Click to collapse
yes, it appears
if you do fastboot devices what happens?
What version is your phone? 32A or 32B? Is HTC Magic sapphire or mytouch?
Could you copy to here the fastboot text of phone details? Thanks
jgcaap said:
if you do fastboot devices what happens?
What version is your phone? 32A or 32B? Is HTC Magic sapphire or mytouch?
Could you copy to here the fastboot text of phone details? Thanks
Click to expand...
Click to collapse
thx for ur reply mate
AFTER DOING FASTBOOT
C:\SDK_15\tools>fastboot devices
< waiting for device >
here's the info
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (sapp10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
REGARDS
paloma728 said:
thx for ur reply mate
AFTER DOING FASTBOOT
C:\SDK_15\tools>fastboot devices
< waiting for device >
here's the info
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (sapp10000)
CPLD-12
RADIO-3.22.20.17
MAY 8 2009,21:02:32
REGARDS
Click to expand...
Click to collapse
Alright from what i can understand is a native htc. You havnt rooted right? Do you have warranty from HTC? Because if you do you should use it there should be a maulfunction hardware and we should not do any experiments in order to try fix something wich maybe has a malfunction, and then you loose warranty.
If you dont have the warranty, then please tell me, have you done anything in particuler to make the phone become like this? If yes please tell me exacly what in order to find a suitable solution .
jgcaap said:
Alright from what i can understand is a native htc. You havnt rooted right? Do you have warranty from HTC? Because if you do you should use it there should be a maulfunction hardware and we should not do any experiments in order to try fix something wich maybe has a malfunction, and then you loose warranty.
If you dont have the warranty, then please tell me, have you done anything in particuler to make the phone become like this? If yes please tell me exacly what in order to find a suitable solution .
Click to expand...
Click to collapse
i have no warranty mate. i hv done nothing to the phone. concerning experiment im ready ks i hv nothing to lose.
besides, two weeks ago i gave to a gsm-shop for unlock, is there any chance of..........
ok lets try this first without rooting. try to put in fastboot mode and upgrade a ROM from HTC official site same version you are using now. (Not the update from january but november)
the unlock procedure does not affect the phone performance so do not worry. is a complete seperate region in your phone.
http://www.htc.com/pt/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
this one for example or:
http://forum.xda-developers.com/showthread.php?t=659403
24) [xda-ftp] [4shared] 3.05.401.3 HTC Europe (this is a great rom in case you are from europe)
jgcaap said:
http://www.htc.com/pt/supportdownloadlist.aspx?p_id=267&act=sd&cat=all
this one for example or:
http://forum.xda-developers.com/showthread.php?t=659403
24) [xda-ftp] [4shared] 3.05.401.3 HTC Europe (this is a great rom in case you are from europe)
Click to expand...
Click to collapse
TRIED THE THREE MODEs :fastboot,recovery, and normal mode. BUT ALWAYS GETS CONNECTION ERROR. all the drivers ar installed. the pc recognizes the device as storage device & as android bootloader interface when using fastboot mode. i can't access the menu to change connection option
mayb i should try sdcard flashing but i do need this zip file sappdiaG.zip
after trying a room update.zip using sd i got these errors
loading.....sappdiag.zip
no image!
loading sappdia3.nbh
no image or wrong image
loading sappdia2.nbh
no image or wrong image
loading sappdiag.nbh
no image or wrong image
loading.....sappdiag.zip
no image!
am i missing something here?
thats normal is not update but sappimg.img . you can do that but before you should be able to update in fastboot mode without problems.
If you have a firewall remove, sometimes it inteferes.
In case doesnt update in fastboot the offficial HTC update read and follow instructions:
http://translate.google.pt/translat...ss.C3.A1rio_para_fazer_o_processo&sl=pt&tl=en
Read everything, Skip the create the gold card method.
and do exacly as is written in english (You dont need to format the card)
Basicly is:
Download http://rapidshare.com/files/267446145/2.53.707.2_-_sappimg.zip
insert on your SD card. run in Hboot (Down volume + back)
The phone is going to update the new rom. Be patient, the first time takes around 5-10 min most of the times.
download the hboot: http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
change the name to update.zip and copy to the SD card. Turn on the phone pressing power+home and it'll enter in safe mode. In safemode apply update.zip .
Then you should have something as: http://www.androidpt.info/images/d/d5/Magic0014_4.jpg
Then you'll flash a recovery so that you can install a rom
paloma728 said:
TRIED THE THREE MODEs :fastboot,recovery, and normal mode. BUT ALWAYS GETS CONNECTION ERROR. all the drivers ar installed. the pc recognizes the device as storage device & as android bootloader interface when using fastboot mode. i can't access the menu to change connection option
mayb i should try sdcard flashing but i do need this zip file sappdiaG.zip
after trying a room update.zip using sd i got these errors
loading.....sappdiag.zip
no image!
loading sappdia3.nbh
no image or wrong image
loading sappdia2.nbh
no image or wrong image
loading sappdiag.nbh
no image or wrong image
loading.....sappdiag.zip
no image!
am i missing something here?
Click to expand...
Click to collapse
just unroot and restart. get the sap.img and load it
jgcaap said:
thats normal is not update but sappimg.img . you can do that but before you should be able to update in fastboot mode without problems.
If you have a firewall remove, sometimes it inteferes.
In case doesnt update in fastboot the offficial HTC update read and follow instructions:
http://translate.google.pt/translat...ss.C3.A1rio_para_fazer_o_processo&sl=pt&tl=en
Read everything, Skip the create the gold card method.
and do exacly as is written in english (You dont need to format the card)
Basicly is:
Download http://rapidshare.com/files/267446145/2.53.707.2_-_sappimg.zip
insert on your SD card. run in Hboot (Down volume + back)
The phone is going to update the new rom. Be patient, the first time takes around 5-10 min most of the times.
download the hboot: http://rapidshare.com/files/247838950/update.Engineering-SPL-HBOOT-1.33.2005-signed.zip
change the name to update.zip and copy to the SD card. Turn on the phone pressing power+home and it'll enter in safe mode. In safemode apply update.zip .
Then you should have something as: http://www.androidpt.info/images/d/d5/Magic0014_4.jpg
Then you'll flash a recovery so that you can install a rom
Click to expand...
Click to collapse
ok mate i will give it a try then post result.
thank you very much
did it work ?
I did a mistake and now im asking for advice because i dont want to brick it for good.
This is all i can see on my device after i tried to run the RUU update to 2.1 with sense
If i try to run again the RUU it says ERROR [170]: USB CONNECTION ERROR
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jan 14 2010,00:14:58
RUU
What can i do to bring him back alive ?
Big thx , Gabi.
First you must flash custom recovery,and then enter it and flash ENG SPL like 1.33.2010, and then you must download eyegor's radio switcher and flash all new and then install new rom
thx for the fast answer
This is my first time , but i still don't know the steps , i am very confused.
I have read about similar situations where goldcard was needed or a RUU solved the problem
If a RUU can solve my problem too it will be great.
Do you have Windows 7 or vista? I think i had same problem i did it on WinXP,which phone do you have Rogers Magic or something else?
I have windows 7 , i found a thread with a similar problem
now i`m trying to do a goldcard but i`m not pretty shure what to do with this after i am done, i just fallow the steps there
I have found 6-7 diferent RUU but only one can actualy see the phone and that is the RUU that actualy did this to my magic , the RUU update stops at the signature ,so with different os i may have a chance?
Here is the thing you can download only 1 RUU from htc site, you must go to country you are from select the right HTC magic i think you are using Rogers magic and then you must enter you S/N there and then you can download it. And install it on winxp. I must ask you something which android do you have 1.5 or 1.6?
I have obtained my htc RUU from my country site but when i try to apply it can't find my device sadly, i think is like you said only works in xp i will try today.
Now i have a goldcard but i dont realy know what to do with him , how can i use it to restore my phone.
Android 2.2 froyo with CyanogenMod 6 was , i was trying to make it to oficial 2.1 with sense
First of all you cant do RUU when you have CM6 it will brick your phone totaly, you must downgrade you phone to original Rogers 1.5 you should batter install some custom made Android made of rogers i created my own,be carefull very carefull.
So in my case is total brick?
How can i downgrade? and witch custom android?
If you want Rogees 2.1 android you just need to change spl (which i can give you,can you enter recovery?and which do you have),second thing is to use eyegor's radio switcher and just press flash new button via fastboot,and the restar to recovery again adn install rogers stock rom with root(which is like original only with root).and i must ask eyegor something so be patient
I can only enter in Fastboot , that is the problem the phone don't allow me to enter in recovery mode.
In my case a goldcard is useful? because i did one following a guide but i don't know how to use it stupid me
I never did goldcard but i know this that you must follow those instructuions if you made a good goldcard you must flash the right eng spl which is 1.33.2010 and if you do that right it will unbrick,and you must then install Custom recovery it is RA's 1.7.0H. When you finish that download eyegore's radio switcher and enter fastboot again and flash new option if do that right then you can boot to recovery and install ROM
http://forum.xda-developers.com/showthread.php?t=778083
http://forum.xda-developers.com/showthread.php?t=677045
And in fastboot you must have same specs like mine
Gabelu23 said:
I did a mistake and now im asking for advice because i dont want to brick it for good.
This is all i can see on my device after i tried to run the RUU update to 2.1 with sense
If i try to run again the RUU it says ERROR [170]: USB CONNECTION ERROR
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jan 14 2010,00:14:58
RUU
What can i do to bring him back alive ?
Big thx , Gabi.
Click to expand...
Click to collapse
1) The reason you don't get connection to the RUUs is because you are in fastboot mode.
RUU needs adb connection mode
2) You have the wrong spl/radio combo. That's why you cannot boot your device to any system. To fix this you have to change the spl to 1.33.20xx version, where the xx can be 05, 09 or 10.
3) Following the logic from option 2 you have a problem!
The spl you have now is a perfected one, meaning you can't do anything with it. So changing only the spl is not possible (as fare as i know :0)
4) Following the logic from option 3 you have to use a goldcard and flash a sappimg.zip or sappimg.nbh.
Both will try to overwrite ALL data on the nand and restore the device to a state where you again have some control over it.
The solution)
You have to make a goldcard and use a combitable sappimg.zip/nbh.
Try this one:
http://rapidshare.com/files/421772202/SAPPIMG.nbh
Put the file on the root of the goldcard. Reboot into hboot or fastboot... let it work... when done restart and post the result here :0)
PS: Give thx to WoblyGoblin because he convinced me to help you out.
Looks like my card is not good for goldcard , i will try tomorrow again with a different card.
PS: BIG thx to both of you for you`r help!
I'm pretty sure your hosed. Once you run an RUU and it fails your stuck with RUU USB until a RUU is ran properly. Which wont happen in your case.
Sent using Tapatalk.
Why wont work in my case?
I think what mumilover told me can be a solution, i must try.
Any progress yet???
Gabelu23 said:
I can only enter in Fastboot , that is the problem the phone don't allow me to enter in recovery mode.
In my case a goldcard is useful? because i did one following a guide but i don't know how to use it stupid me
Click to expand...
Click to collapse
if you have a goldcard, put in your device and flash with RUU rom.
if you didn't have a goldcard, download your original rom from HTC website and flash it
if you have non branded device, choose unbranded rom.
but if you have branded device, choose your branded rom.
i was semi brick (stuck in RUU mode) my device twice, and this solution working well for me
Hey everyone.
I was rooting my MyTouch 3g w/3.5mm this morning. I'm following the instructions from here ( http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/ ). I had apparently messed up when I was at the restart after flashing sappimg.zip onto the phone and was stuck at the HTC Magic Screen. I restarted my phone by holding down the Reject Call + Volume Down key and told it to flash sappimg.zip onto the phone again so I could redo it correctly. Unfortunately, it's stuck at the "[1] SYSTEM - UNZIPPING" stage. I'm afraid to turn it off because it says to not power off the device.
So, yeah, have I bricked my phone or is there a way to restart this process so I can successfully root?
Thanks much, and have a happy holiday.
EDIT: This sort of resolved itself, but now I can't get into recovery mode. :/
Rhaseo said:
Hey everyone.
I was rooting my MyTouch 3g w/3.5mm this morning. I'm following the instructions from here ( http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/ ). I had apparently messed up when I was at the restart after flashing sappimg.zip onto the phone and was stuck at the HTC Magic Screen. I restarted my phone by holding down the Reject Call + Volume Down key and told it to flash sappimg.zip onto the phone again so I could redo it correctly. Unfortunately, it's stuck at the "[1] SYSTEM - UNZIPPING" stage. I'm afraid to turn it off because it says to not power off the device.
So, yeah, have I bricked my phone or is there a way to restart this process so I can successfully root?
Thanks much, and have a happy holiday.
Click to expand...
Click to collapse
So your flashing the engineering spl for the first time or are you flashing the stock spl back?
Binary100100 said:
So your flashing the engineering spl for the first time or are you flashing the stock spl back?
Click to expand...
Click to collapse
I'm flashing the engineering spl onto there for the first time.
It appears that being stuck at the Magic screen is normal according to a different (but similar) guide from the Cyanogen Wiki. Would it irreparably damage my phone if I removed the battery despite it being at the "Unzipping" screen for Sappimg (as I was unzipping sappimg for a second time) and proceeding with CyanogenMod's guide instead?
EDIT: It appears my phone just turned off on it's own (battery probably died). I'm going to try CyanogenMod's instructions and see if that works.
EDIT 2: So, I reflashed it with the sappimg that Cyanogen has on his wiki. So everything was smooth sailing until I got to the Recovery step. I cannot, for the life of me, to get it to boot in recovery mode. I hold HOME+POWER but nothing pops up.
EDIT 3: And it appears as if I've bricked it.
Rhaseo said:
I'm flashing the engineering spl onto there for the first time.
It appears that being stuck at the Magic screen is normal according to a different (but similar) guide from the Cyanogen Wiki. Would it irreparably damage my phone if I removed the battery despite it being at the "Unzipping" screen for Sappimg (as I was unzipping sappimg for a second time) and proceeding with CyanogenMod's guide instead?
EDIT: It appears my phone just turned off on it's own (battery probably died). I'm going to try CyanogenMod's instructions and see if that works.
EDIT 2: So, I reflashed it with the sappimg that Cyanogen has on his wiki. So everything was smooth sailing until I got to the Recovery step. I cannot, for the life of me, to get it to boot in recovery mode. I hold HOME+POWER but nothing pops up.
EDIT 3: And it appears as if I've bricked it.
Click to expand...
Click to collapse
Will the rom start? If so, you didn't brick it.
Do you have the Engineering SPL on it? What SPL version do you currently have on there? Remember that if you have the T-Mobile US MyTouch w/3.5mm jack then you MUST have 32B recovery and radio and STOCK (1.33.0013) SPL before flashing a custom rom.
Best way to do it is to flash your custom recovery (I suggest Clockwork Recovery for Mytouch/ION devices) by fastboot.
Afterwards then flash your stock (S-ON) SPL back and then boot to recovery to flash your rom.
REMEMBER!!! YOU DO NOT HAVE A 32a DEVICE! DESPITE WHAT THE SPL SAYS... IT'S NOT TECHNICALLY A 32a DEVICE!!! You MUST treat is as a 32b.
Binary100100 said:
Will the rom start? If so, you didn't brick it.
Do you have the Engineering SPL on it? What SPL version do you currently have on there? Remember that if you have the T-Mobile US MyTouch w/3.5mm jack then you MUST have 32B recovery and radio and STOCK (1.33.0013) SPL before flashing a custom rom.
Best way to do it is to flash your custom recovery (I suggest Clockwork Recovery for Mytouch/ION devices) by fastboot.
Afterwards then flash your stock (S-ON) SPL back and then boot to recovery to flash your rom.
REMEMBER!!! YOU DO NOT HAVE A 32a DEVICE! DESPITE WHAT THE SPL SAYS... IT'S NOT TECHNICALLY A 32a DEVICE!!! You MUST treat is as a 32b.
Click to expand...
Click to collapse
Oh, wow. That explains why I bricked the phone. The Amon_RA Recovery I put on there was 32a... I'm an idiot.
The phone won't start up at all. :/ Looks like I'm out $100 or so.
Thanks for that, though. I was going to give you a "Thanks" but it appears the button has disappeared for me.
Rhaseo said:
Oh, wow. That explains why I bricked the phone. The Amon_RA Recovery I put on there was 32a... I'm an idiot.
The phone won't start up at all. :/ Looks like I'm out $100 or so.
Thanks for that, though. I was going to give you a "Thanks" but it appears the button has disappeared for me.
Click to expand...
Click to collapse
Can you still get into fastboot?
Binary100100 said:
Can you still get into fastboot?
Click to expand...
Click to collapse
Nope. It won't turn on at all.
Rhaseo said:
Nope. It won't turn on at all.
Click to expand...
Click to collapse
Won't boot, no recovery, no fastboot.
If it looks like a brick, if it sounds like a brick then it's probably...
I have a similar problem. I purchased this phone and it just almost works. It boots into fastboot just fine but not recovery. Here are the specifics as they stand now.
Sapphire unknown 32A ship S-on H
CLD 13
Radio 3.22.20.17
May 8 2009, 21:02:32
I made a good gold card...tried the 2010 spl...still hangs during unzip step of the flash process. Any other ROM and I get a main version older error.
Fastboot info version main 2.53.707.2
cid T-MOB010
Any help would be greatly appreciated.
Nice job on probably bricking your phone. You've got the myTouch 1.2 which means you just flashed an incompatible radio. Congratulations!!! I honestly not sure what to tell you. Which sappimg are you trying to use to get the engineering SPL?
Like i said...it was like this when I bought it.
I'm going to try to do a poorman's JTAG...wish me luck.
jonk26.2 said:
wish me luck.
Click to expand...
Click to collapse
Good luck! You can do it!
If you have any questions along the way, please don't hesitate to ask.
JTAG did in fact de-brick my MT3G 1.2 (bought from ebay) the first time I tried it. I made the mistake of flashing the stock ROM, so I would get to the "touch the android to begin" screen and couldn't get any further without a data plan. It wasn't until I probably flashed the wrong sappimg in a root attempt that I started experiencing the stuck at unzipping/FAIL-PU/remote signature verify fail problem...
FYI, I tried flashing radio 2.22.28.25 (the one from the OTA) using JTAG and the radata command, and it fixed my USB. I haven't experiemented much beyond that, but I'm planning to try some more things this weekend.
Moderators, I'd like to suggest merging this thread with http://forum.xda-developers.com/showthread.php?t=773368 and http://forum.xda-developers.com/showthread.php?t=771622 since they all seem to be discussing the same problem.
Hi everyone
First im super noob to this i have used this forum to update software on my windows mobile device but android is a lot more dificult if you are noob.
Ok to start i strugled to get fastboot working but after aboout 3 days strugle i managed to get it working.
Then I flashed amon ra 1.70 and then after that i installed the engineering spl and then a custom rom. i cant remember the name of the rom but i have double checked that it is for HTC MAGIC and also 32A. after i flashed the rom i cant boot the phone it stays on the vodacom splash screen the first screen when i put my phone on.
I have tried numeres other roms but no luck it just doest want to boot!!! I can still go in to amon ra and still use fastboot if that is a help.
I can send all the details of the phone tonight when i get from work. But any help will be graetly apreciated.
Regards
Please post your fastboot info.
keinengel said:
Please post your fastboot info.
Click to expand...
Click to collapse
sapphire pvt 32A eng s-off h
hboot-1.33.2005 (sapp10000)
cpld-12
radio-3.22.20.17
Wrong spl. You need to install 1.33.2010.
keinengel said:
Wrong spl. You need to install 1.33.2010.
Click to expand...
Click to collapse
thanx i will have a look when i get home to update that.
Will that solve my problem?
Reaper21 said:
thanx i will have a look when i get home to update that.
Will that solve my problem?
Click to expand...
Click to collapse
I just upgraded the SPL to 1.33.2010 and still stuck on the boot screen.
I tried to install the rom again using fastboot flash system (rom).zip and it didnt work i dont know what to do must i also update the radio and if so how and where can i get the radio.
Please i am realy clueless now on what to do thanx for the help so far.
Okay, now you should have the right SPL and Radio. Start your phone in Recovery and connect it to your computer. Choose USB-MS Toggle and your phone's SD card will show up in My Computer. Copy the following files to the root of your SD card:
http://mirror.teamdouche.net/get/dream_sapphire/cm_dream_sapphire_full-285.zip
http://briancrook.ca/android/cm-ports/bc-6.1.0-ebi1-signed.zip
http://goo-inside.me/google-apps/gapps-mdpi-tiny-20101020-signed.zip
and safely remove the card using. Press Home on the phone to go out of the MS (Mass Storage) mode and then go to Flash zip from SD card. Flash them in the same order that I gave you above. When it's done, choose Reboot and it should boot up into a fully-working nightly build of CyanogenMOD.
keinengel said:
Wrong spl. You need to install 1.33.2010.
Click to expand...
Click to collapse
All 1.33.20xx where xx can be 04,05,09 or 10 do work for that radio. So you are not right on the one. The problem is simple, either he/she does not give enough time for the "new" rom to load all the way ( which is 7-15 mins) or he/she did not do a wipe before running the rom.
Do this and it WILL work:
Download my fastboot commander from my signature, magic version.
Boot into fastboot and start the tool.
Go to "Misc" tab. Select all partitions (in the RED box) and click "erase chosen partitions".
Go to "Magic 32A" tab and click on "flash new".
When done, reboot into custom recovery (hold home + power together for 5 sec and let go).
Use the trackball to navigate.
Use the "usb-ms toggle" and copy this file inside the sdcard.
Press home on the phone to return to menu and then select "Flash zip from sdcard".
Now select the file from above.
When done choose to reboot into system, and ENJOY :0)
NB: it will take like 10-15 min before the system starts up.
GOOD LUCK.
mumilover said:
All 1.33.20xx where xx can be 04,05,09 or 10 do work for that radio. So you are not right on the one.
Click to expand...
Click to collapse
Oops. Could have sworn .2005 only works properly with the 32B radio. My bad. Oh, well, he has 2010, which should be fine for all old-radio ROMs.
@Reaper21 To get you a bit more confused: 32A Magics (like the one you have) can run two different radio/spl combinations. One is the one you have (SPL 1.33.xxxx + Radio 3.22.xx.xx) - called "old radio" - and the second (SPL 1.76.xxxx + Radio 6.35.xx.xx) is the one you need to run most SenseUI ROMs (but others too - you'll spot them because the developers mention they are for the "new radio" or "6.35").
If you want a clean Android experience, closer to the default user interface, you can run CyanogenMOD and ROMs based on AOSP (Android Open Source Project) - most of them need the old radio. These have the advantage of always using the latest version of Android available.
If you want the fancier - but sometimes slower - SenseUI you can use the RCMagic (the one mumilover recommended), CleanMagic and others. The user interface is a lot friendlier, but you have to make do with Android 2.1 (instead of the latest official version - 2.2.1, with 2.3 coming up). This won't normally be a problem. I, for one, prefer SenseUI and I'm guessing mumi does too
Use mumilover's commander to switch between new and old. It should be safe, as long as your phone's battery is charged and you don't unplug the cable or anything
Let us know how it works out!
Ok guys internet was off for a while im having a look and downloading the files now. I realy hope it works. will keep you posted, and thanx for the replies so far
Dude thank you you are the best its working again booting into the mod and working fine accept the reason i Wanted to do the software is that for some reason my Sim cant cant register on to the network. I Have tried all 4 networks in my country and none work it just said that unable to connect to the network at this time try again later.
Can this be a hardeware fault?
But thanx at least the device boots and i can use GPS again
Is the phone locked to the original carrier?