for some reason everytime I want to use internet sharing on any 6.5 roms it never works my computer says aqiuring network address but it never does when i'm using a 6.1 rom it always works what am I doing wrong? I would really like to get it working on the 6.5 its way better everything but that one problem. Thanks everybody.
Don't know if this helps, but try the option "Enable advanced network functionality" under "USB to PC"
i already have that option checked i still cant figure it out. i'll just use 6.1 for now thanks anyways.
Related
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync programm and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can slove this problem?
Have you try to use it as a Modem for an apple copmputer?
Thx a lot Guys!
Try this: go to Settings, Connection, USB to PC and uncheck "Enable advanced network functionality". This way the phone should be recognised as a USB modem.
(I don't have a Mac so I haven't tried this myself)
thx i try it but it doesn`t work!
I try on xP and i have the same problem!
BrigateGB said:
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync program and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can solve this problem?
Have you try to use it as a Modem for an apple computer?
Thx a lot Guys!
Click to expand...
Click to collapse
I certainly have been trying... the first thing that I find is that when I connect it to the Apple using the USB cable is that it doesn't recognise it. Has anyone had more success with this? The only problem is that I can't remember what happened when I first connected it - perhaps it asked me to set up a connection and I got it wrong. This is my first return to Macs in ten years, so I was a little overwhelmed by trying to get familiar both with it and with a new phone (Dopod D810).
If I did set up a connection... (!) then I think the connection is called "SerialPort-1", and the network report says that it is configured, but not connected. I don't seem to be able to delete it and start again. Maybe the Mac isn't even recognising the USB connection?...? Any feedback would be much appreciated!
This has been discussed many times - no DUN service with Trinity ...
But no problem going online with your MacBook. Make sure you update to the latest OSX.
Then delete old bluetooth connections to Trinity on your MacBook and reconnect using bluetooth
Then start Internet connection sharing on your Trinity - then click on the bluetooth symbol (top right) on your MacBook and choose the New Option connect to Bluetooth Pan (your owner name)
Hope it helps
Fellassss:
Did you guys check out: My MobileR
I always knew this kickass app existed but never really tried it..... till now.
The thing is awsome
If you havent tried it out you should.
My question is:
Does any one know how can you use the computers internet conection on the phone. You guys know what I mean right?
Thanks for everyones time.
Yes, i've used My Mobiler many times.
Since it requires ActiveSync connection between the device and PC, the PC's internet connection will automatically be shared with the phone.
iv'e tryed it and it works good but haven't found any sense in the usage
I have used this app for a few weeks now without many problems. i have occcasionally had problems with the activesync connection but that may b down to something else, i simply disconnect and reconnect. it's great for using with a cradle as you can download your cabs, copy to device in normal way then use mymobiler to install and test without disconnecting device. i can send texts using pc keyboard and you can video record your screen as u use it (could b good to show a developer a problem that u are having with their app). screenshots are useful when you cant get the timing right on your screencapture program.
Techno-Freak said:
Yes, i've used My Mobiler many times.
Since it requires ActiveSync connection between the device and PC, the PC's internet connection will automatically be shared with the phone.
Click to expand...
Click to collapse
I dont get an auto connection. Weird!
Any help fellas?
Sergio PC,
Are you using ActiveSync(on XP) or WMDC(on Vista).
In the "Connection Settings" on both ActiveSync and WMDC, there is an option to "Allow wireless connection on device when connected to the desktop."
Try toggling it and see if it works then.
starsucker said:
iv'e tryed it and it works good but haven't found any sense in the usage
Click to expand...
Click to collapse
I agree...i guess it is usefull if you want clean your diamond on a large screen
Techno-Freak said:
Sergio PC,
Are you using ActiveSync(on XP) or WMDC(on Vista).
In the "Connection Settings" on both ActiveSync and WMDC, there is an option to "Allow wireless connection on device when connected to the desktop."
Try toggling it and see if it works then.
Click to expand...
Click to collapse
Thanks gonna give it a shot.
Kick ass Vista Ultimate is my poison.
Thanks again.
My Solution
If you use WindowsXP you have to use activesync to create any sync setting..
If you use WindowsVista you have to use WMDC and to create any sync setting..
For example sync "My Mobile Favorites"
I m using it long time due problem with my ActiveSync (Firewall etc) , so I simple using the WIFI connection, In this case no ActiveSync needs...
Hey guys,
I have searched for this problem on the forum but I can't find a solution. The problem I have is that my Bluetooth is not working like I would like it to:
When trying to connect from my TD2 to my pc (xp) / laptop (vista) I get the message:
Cannot connect
Your device hasn't been able to connect with 'pc-name'. De connection failed or the password is incorrect.
(I get it in dutch... so if my translation isn't the same as in the english version you know about it).
When using the pc / laptop to connect to the TD2 I get a screen where I can choose between two bluetooth services:
- Dial-up Connection
- Network Access Point
... These are the only two. When I use my old phone I can also use a Serial port connection (and even a few more).
The purpose of the bluetooth connection is to be able to synchronize my contacts with my Microsoft Outlook 2007.
Can someone please help me with this problem? I have already tried a few things, like soft- and hard reset. Updated the ROM, etc. But it is still not working. The only thing which DOES work is connecting the TD2 to my radio in my car...
Thanks in advance
Hi robje,
Ive got same problem with you.. but i managed to solve it ..try enable receive all incoming beams.. u can find it at all settings --> connections --> beam --> then check " receive all incoming beams"... good luck.....
Thanks for the quick help!
I already enabled this setting, but I still have these problems...
I've got exactly the same problem with my bluetooth,are you still using the stock ROM? I've currently got energyrom's standard2.5 installed so I thought that it maybe WinMob 6.5... My wife's phone is fine and she's using the stock ROM. I'm going to go back to HTC's stock ROM, so I'll give you another update after I've done this...
One note to add.. I've seen that on my older Diamond, the bluetooth COM ports menu shows "New outgoing port", whereas my new Diamond2 shows nothing on the same menu...
Update... I've flashed my Diamond2 back to the original HTC ROM and bluetooth is now working correctly. So it looks as though the problem is probably with WinMob 6.5...
Can anyone confirm this at all???
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Robje113 said:
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Click to expand...
Click to collapse
The retail version isn't but a lot of the ROMs on here have been done with beta versions of 6.5 (mines on build 23016)...
Anyway,I've flashed back to my cooked ROM and bluetooth still isn't working correctly. I've been messing around with the "advanced configuration tool" and found that OBEX was disabled. However once I turned this on, it still wouldn't work correctly...
Yeah I also found the OBEX using Advanced Config. But that didn't seem to matter... I hope anyone knows a solution for this, because it's really annoying! I have contacted the HTC Helpdesk... but didn't get much help. After giving all details about the problem they send me a manual of how to turn on the bluetooth radio on a mobile device :|...
Have you tried reflashing with the latest update from the HTC website?
This problem is getting weirder... I've now found that I can send files from my TD2, it's just the recieving of them that won't work. So I think it must be a possible compatibility issue between WinMob 6.5 & the older version on my TD...
Has anyone got an idea to solve this problem...?
No intention of being a smartass though...
Have you checked the box "visible"?
magnus66 said:
No intention of being a smartass though...
Have you checked the box "visible"?
Click to expand...
Click to collapse
Hey Magnus,
I do have checked that box and it's visible. I have done all there can be done (the easy way) on the TD2, but all settings are correct. I can also see a list of available bluetooth services on the phone, which also describes the one I need. But when I then try to connect my pc with my phone, I can only choose on my pc between:
- Dial-up Connection
- Network Access Point
Only those 2... when there are much more available according to the list on the phone...
Have you tried to connect to your "old phone" as you mentioned?
Sending receiving between those phones
Hey everyone! I've been using NFSFAN's Windows Mobile 6.5 ROM on my HTC Touch for quite some time now. I want to use the built in tethering function. The problem is that in the Internet Sharing menu, I can't touch/select the 'Connect' button for neither the USB nor the Bluetooth connection. I think it was working before I installed Bell's Carrier cab.
Do you know any registry tweeks, or software that can help?
EDIT: Now I'm using IntrShrUI, but after a couple of seconds, the device connects in Disk Drive mode How can I disable that?
daveribs said:
Hey everyone! I've been using NFSFAN's Windows Mobile 6.5 ROM on my HTC Touch for quite some time now. I want to use the built in tethering function. The problem is that in the Internet Sharing menu, I can't touch/select the 'Connect' button for neither the USB nor the Bluetooth connection. I think it was working before I installed Bell's Carrier cab.
Do you know any registry tweeks, or software that can help?
EDIT: Now I'm using IntrShrUI, but after a couple of seconds, the device connects in Disk Drive mode How can I disable that?
Click to expand...
Click to collapse
Have you made sure the screen doesn't time-out?
This was one of my favourite features.
Ok i can get wifi on it and download stuff. but when i disable wifi and try to just use the internet it wont connect to any thing.. any ideas? thanks
For me when I had this problem I would go to settings.... Network..... Then disabled connect through network.... Then enable it again... I'm not talking about wifi I'm talking about tmobile network.. This always works for me
Sent from my HTC HD2 using XDA App
Try settings, network, and select GSM only. Worked for me on ATT with a Euro HD2.
WTF.. i have tried 5 or 6 different android version on my htc hd2, and the internet doesn't work.. like the guy said about i can download everyrthing on wifi, but thats it.. Am i missing something??? i tried the about but doesn't work..
some one please help. Thanks.
still nothing cant some one help plz lol..
I have the same issue.
WiFi is working fine, but mobile internet doesn't work.
I tried to set up connection setting, but without success.
P.S. In WM6.5 internet is working good.
I had this same problem few days ago when first installing Android in my HD2. I discover that my problem isn't in Android but rather the mobile internet settings within Android, namely missing APNs.
Boot up Android, go to settings> Wireless... >mobile internet settings> APN.
If there is nothing in there that is the problem. Just google for the carrier's APN and enter it manually. u need to press the 'start' menu button on the phone in order to bring up the option to enter new APN.
Hope this helps
PS: I'm using MDJ Froyo Revolution 1.5