Hi,
I have a mac mini sharing its internet connection on Ethernet to almost all the wireless devices.
I enable "Internet sharing" on the mac to send out a wireless signal. Basically all the devices with a wifi card could connect to the mac and get internet access. I had a ipod touch, it can access to internet through the mac. I had a white English G1, it also works.
But now, a German HTC dream (DREA110 PVT 32B) can connect to the shared network, it gets IP, no problem, but it can not access to internet, web browsing does not work, PING doesn't work. Interestingly, this German G1 can access to internet through the AP in the library and at my home.
What is the problem with this G1, do you guys have any idea? Thanks in advance.
No idea?
Does anyone else have this problem?
Dealing with this now. We're at a hotel and are sharing the hotspot access we are buying. I'm on a MacBook Pro and can share the signal off of my Brother's macbook via bluetooth. But my cousin can't get on the internet from his G1 through the host mac. They are paired. Any thoughts
Related
Hi there,
Don't know if this is even possible I've read all the articles I could find here and tried Microsoft web pages. If you can help ill most appreciate it.
(Apologies if this has been answered please let me know the link...)
My internet connection (at home) is via NTL cable, My 4 pc's connect to the internet via a Linksys router, each PC has a private IP address along the 192.168.1.x subnet which NAT to the router for internet access - all transparent.
I do not have a proxy server at home, connection is established because each PC uses the router as a gateway for internet access.
My XDA2 refuses to talk to the internet via Activesync. I can confirm that my handheld connectiviy text bubble says that the internet connection is pointing to the PC connection. the paramaters in Active sync passthorugh are set to internet - But it just won't work.
I even tried configuring the proxy option to the routers address no avail.
The XDA wants to keep defaulting back to its GPRS connection.
At the moment I have disabled the phone completely to stop it dialing out whilst I am testing.
I'm out of ideas can anyone help !!!!!!!!
I managed to fix this problem. I set up a personal proxy server from
http://www.youngzsoft.net/ccproxy/ its an excellent proxy only 815k in size and its intelligent enough to understand NAT'd IP addresses etc for connections to routers.
All I had to do was to configure the XDA 2 work profile with the proxy server address then the internet passthrough worked fine.
For Bluetooth access (I use a D-link USB bluetooth adapter). I had a problem getting the XDA 2 to launch the bluetooth connection under the activesync. I used the excellent pocket bluetooth tools
http://216.239.39.104/translate_c?h...t+bluetooth+tools&hl=en&lr=&ie=UTF-8&oe=UTF-8,
after installing this the connection worked straight away with BT internet access as well.
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Hi I am new to this forum, and like the person above am trying to find a way to browse files on my PC through my XDA2 (i-mate).
I am connected via bluetooth to my PC, activesync is working fine this way, as is internet browsing on my XDA2 using my PC's internet connection.
All I wan't to do is be able to sit away from my PC and get files from it to the XDA2 via bluetooth.
Apparently using Resco File Explorer and a wi-fi connection you can set up a network with your PC, but when I try this with Bluetooth it doesn't work - surely bluetooth can offer the same file sharing - just slower???
Please help us if you know a way!
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
essojay said:
Analyst said:
even though i upgraded to the new O2 rom for the xda2, i still had problems until i resorted back to the bluetooth tools, so i have internet via bluetooth gondle to my adsl. But the internet speed on my xda2 is still damm slow, perhaps its limited by the bluetoot connection speed. (my adsl is a 1mb line plus a netgear wgt624 wireless router connecting my laptop to the internet. any idea how i could get a better speed?
also what i like to do is able to access all shared files on the network or on my actual laptop from my xda2. activesync lets me browse from the laptop, but i can use the xda2 to browse the laptops files. any idea how i could do that? the laptop itsself has a 802.11g connection and an assigned ip address, but i guess that has nothhing to do with the bluetooth connection. so has anyone got any suggestions how i could access the files? some detailes guidance would be extremely welcome. thanks.
Click to expand...
Click to collapse
pls explain so more as am using Tiscali...
bR
Click to expand...
Click to collapse
sorted!!!
BR
hey, ive been scooping on here for a while and this is my first post.
ive searched for over an hour and i havent found the answer.
i downloaded internet sharing cab and installed it, it runs fine on my wm6, but when i connect it to my laptop using usb, the laptop cant get the IP address.
it eventually says limited connection on my laptop. any ideas?
TIA
Cliff
I can tell you from experience (i connect this way) that you don't need to install anything on your laptop exept for active sync (i think the latest one is 4.5) after you do that you enable internet sharing in your wing ( start/programs/accessories/internet sharing) after you enable it you connect your wing to your laptop, at that point your laptop should regognize your phone as a network connection. you can now browse the net.
if you're on the 5.99 proxy there is one more step. you have to configure Internet explorer to use the proxy. I don't remember everything off the top of my head but I think it goes like this settings/ connections tab/lan settins/proxy server
from there you just enter the same proxy and port that you did on your wing. you should now be able to surf.
the thing is, my phone is unlocked and im on the cingular network. i have all the settings for it. internet explorer works on my phone.(i get internet on my phone)
when i connect it to my laptop, it detects it like its supposed to, BUT it doesnt get the IP address. if you have anymore info, let me know
thanks
Cliff
I know that one can create a ad hoc network to share the desktops files and stuff without network computer.So can't i share internet?(off course i can).But i want this internet on my ppc,via wlan.Please help me!!!!
I do not want to use any router,usb,and active sync doesn't works in vista
Using vista home premium,
netgear wlan card
ppc i mat jasjam,a.k.a dopood 838pro.or tytn I.
Netgear Wlan card? What does it do? Is it a WiFi enabled modem/router through which you connect your PC to access the net? If yes, then connect your PPC directly to it!
Else, if netgear is a WLAN card, learn how you can make it act like an hotspot and then connect your PPC.
Get me?
Regards,
Carty..
pranjal87 said:
I know that one can create a ad hoc network to share the desktops files and stuff without network computer.So can't i share internet?(off course i can).But i want this internet on my ppc,via wlan.Please help me!!!!
I do not want to use any router,usb,and active sync doesn't works in vista
Using vista home premium,
netgear wlan card
ppc i mat jasjam,a.k.a dopood 838pro.or tytn I.
Click to expand...
Click to collapse
I'd love to know how this can be done as well...
Solution
I had internet over NIC one,and wireless network to connect my PPC to desktop. Now to pass internet to Wireless NIC just "bridge connection" from control panel-network and sharing centre-manage network connection....Right click on NIC1-add to bridge....right click NiC2-add to bridge
N.I.C-----Network interface card or lan card.If you don't have a switch, router then its a good idea to bridge all your networks so they are interconnected. A true web of networks. Any questions...message me.
One more thing, you cannot use a wireless card(net gear Belkin etc) as a gateway cuz one simple reason that it is not a router its just a connection point. I had a talk with Microsoft regarding this they say they might provide software to do this thing in the next windows. You can Google for software which can force your wifi card(wireless) card to become a gateway(hot spot) but chances of finding stable software are rare.
I just got a Tattoo.. I think new users have always problem.
Somebody help me for the following:
1. I want to access internet at home on my laptop running Windows 7 by TETHERING with my Tattoo GPRS(EDGE). Is that USB connection and selecting 'Mobile Network Sharing'?? But I am still not able to success.
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
thacen said:
I just got a Tattoo.. I think new users have always problem.
Somebody help me for the following:
1. I want to access internet at home on my laptop running Windows 7 by TETHERING with my Tattoo GPRS(EDGE). Is that USB connection and selecting 'Mobile Network Sharing'?? But I am still not able to success.
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
Click to expand...
Click to collapse
Thank you everybody. I resolve my 1st problem. Yes, it is just USB connection and selecting 'Mobile Network Sharing'. My problem was because of not able to install the NDIS driver properly. After resolving the driver problem it is working fine.
But I am still looking for my 2nd problem RETHETING
thacen said:
2. At my work place we have wired network, so I want to access Internet on my Tattoo by USB connection to a PC, just opposite of Tethering, let's say RETHETING. but I could not find anywhere.
Thnx
Click to expand...
Click to collapse
I'm not sure if it will work that way... I know with a Windows Mobile device you can, but never tried under Android. Perhaps there is an option somewhere in the HTC Sync program?
There definitely isn't an option in HTC Sync to do this. In fact, I don't know of any way of generically sharing your internet connection over USB. If your work PC has a Wi-Fi card, you could easily share the internet connection over an ad-hoc network.
Edit: In principle, you could also share your internet connection over Bluetooth but I'm pretty sure the Tattoo doesn't support the necessary Bluetooth profile(s) for such connections.
check out this gadget http://usb.brando.com/prod_detail.php?prod_id=00805
Ali 24789 said:
There definitely isn't an option in HTC Sync to do this. In fact, I don't know of any way of generically sharing your internet connection over USB. If your work PC has a Wi-Fi card, you could easily share the internet connection over an ad-hoc network.
Edit: In principle, you could also share your internet connection over Bluetooth but I'm pretty sure the Tattoo doesn't support the necessary Bluetooth profile(s) for such connections.
Click to expand...
Click to collapse
I think Wi-fi ad-hoc connection is for rooted androids only and I don't found any rooted tattoo till date. I tried another option, using Connectify on my Windows 7 laptop and sharing Wi-fi. But still unable to success browsing, eventhough my phone can be connected with my Laptop through this connectify.
Anybody have success browsing it kindly share.
thacen said:
I think Wi-fi ad-hoc connection is for rooted androids only
Click to expand...
Click to collapse
Uh, what? I'm sharing my internet connection over Wi-Fi with my MacBook right now and my Tattoo can connect to it and access the internet just fine.
Edit: You're probably thinking of android-wifi-tether, which lets you share your phone's 3G/2G mobile connection via Wi-Fi or Bluetooth.
Edit2:
MiSSigNNo said:
check out this gadget http://usb.brando.com/prod_detail.php?prod_id=00805
Click to expand...
Click to collapse
That gadget won't help. How is a phone supposed to make use of it?
Ali 24789 said:
Uh, what? I'm sharing my internet connection over Wi-Fi with my MacBook right now and my Tattoo can connect to it and access the internet just fine.
Edit: You're probably thinking of android-wifi-tether, which lets you share your phone's 3G/2G mobile connection via Wi-Fi or Bluetooth.
Edit2:
That gadget won't help. How is a phone supposed to make use of it?
Click to expand...
Click to collapse
If you are talking about tethering, it is OK, I am just satisfied with USB tethering, it is working now, but What I am actually looking for is about RETHETING just converse connection of that tethering. (I know there is no word like RETHETING BUT I don't know what is the right term of just converse connection of tethering.) The problem is, I want to share wired Internet at my working place with my HTC tattoo phone as I have limited GPRS subscription to save some money and to enjoy speed of that wired internet.
I thought running Connectify on my Windows 7 laptop connected to that wired Internet as a Wi-fi hotspot then connected by this android phone (Tattoo) is the right solution.
Yes, it is connected pinging is ok but could not access internet from my Tattoo. May be some firewall problem or something I cannot figure out. If some one have solution it is most welcome.
thacen said:
If you are talking about tethering, it is OK
Click to expand...
Click to collapse
No, I was talking about "retheting"; my MacBook has a wired (ethernet) connection to the internet and is sharing it over Wi-Fi, which my Tattoo can connect to and use.
I did some reading up on Connectify (and was surprised to find that Micro$oft still hasn't quite implemented the feature natively on Windows yet) and it should work. I don't have a Wi-Fi card on my desktop PC so I can't test it myself but perhaps you are having something like a firewall problem.
Ali 24789 said:
No, I was talking about "retheting"; my MacBook has a wired (ethernet) connection to the internet and is sharing it over Wi-Fi, which my Tattoo can connect to and use.
I did some reading up on Connectify (and was surprised to find that Micro$oft still hasn't quite implemented the feature natively on Windows yet) and it should work. I don't have a Wi-Fi card on my desktop PC so I can't test it myself but perhaps you are having something like a firewall problem.
Click to expand...
Click to collapse
I have tried with Connectify and also Virtual Router on my Windows 7 but could not success. I think you are lucky to own a macbook. My Windows 7 is RC so it might be because of that or Tattoo may lack something.
Regarding that android-wifi-tether, it reports as rootted device required and could not help my requirement.
I thought you were talking about an usb internet sharing connections...
If you want to do it via wifi, is pretty easy, since ALL windows have the ad-hoc functionality made by default. Problem is that if you use it with your wifi chipset then you won't be able to conect directly to other wifis if it is your main connect unless you buy another wifi card for this purpose...
in windows 7 you can find this functionality under the connection center... in windows xp is a little bit difficult because you have to configure the adapter into the wifi adapter properties in network connections tabs.
MiSSigNNo said:
I thought you were talking about an usb internet sharing connections...
Click to expand...
Click to collapse
Yes. I actually want that USB internet sharing. But till date no one is seem to success it.. So, while waiting for this solution.. I am just looking for alternative, that sharing through wifi.
If you want to do it via wifi, is pretty easy, since ALL windows have the ad-hoc functionality made by default. Problem is that if you use it with your wifi chipset then you won't be able to conect directly to other wifis if it is your main connect unless you buy another wifi card for this purpose...
in windows 7 you can find this functionality under the connection center... in windows xp is a little bit difficult because you have to configure the adapter into the wifi adapter properties in network connections tabs.
Click to expand...
Click to collapse
I also thought that it should be very easy, and tried all possible means that I know but could not success. One funny thing is, I can get IP address resolved of any URL on my tattoo after wifi connection. It means it can reach DNS server and can resolve IP address but still could not able to browsing. May be some firewall or Antivirus is blocking the browsing on my Windows 7 pc I need to check thoroughly.
If someone have good explanation, it will be very helpful... thanks.
Wifi is working
I was making my laptop complicated by setting 3 static IP networks..as my work place has 3 gateways and I manually change gw when required. I clean it up and set to only one. Now Internet through Wifi of Laptop is OK I am using Connectify on Windows7.
Thx for the patience.
But still waiting for solution on USB "Retheting"
I love the connection of the HTC HD2 WiFi router option which allows me to seamlessly connect to the internet to browse, email, download and chatting.
However I have been unable to use VPN properly. I am talking about the Windows XP VPN feature where the host computer accepts incoming connections and the client computer connects accordingly.
The VPN connection connects fine, however I cannot browse shared drives nor connect to the network printer. I know this problem exists when prior to the HTC HD2 in normal Windows Mobile 6, I used to connect to Bluetooth PAN and it has this problem as well.
I assume that being a Router-like program, the HD2 would work just like a router.
Has any HD2 users in this forum had success with WinXP VPN using the HD2 WiFi Router program?