Database Users

00058002 error trying to flash RC29

Here's a thing..
When I try and flash the RC29 image (FAT32 format microSD, copy DREAIMG.NBH over, boot with power / camera) the bootloader goes through the 'checking' process but then displays '00058002' in red text at the top and drops back to bootloader.
Any clues as to why it could be doing this? I've used the same process to root another G1 fine with same SD card, and Google searches yield no clues.
Making a GoldCard with QMAT did not help as well.

Don't censore the DREA... It's a generic number.

maxisma said:
Don't censore the DREA... It's a generic number.
Click to expand...
Click to collapse
that's how it's displayed! that DREA.. line is distorted.

any thoughts, guys?

might try to downgrade radio first as rc29 may not work with .26i radio. warning--brick phones have been known to occur with earlier radios and some spl (ie deathspl) which you do not have.
bill g.

bestrafer said:
any thoughts, guys?
Click to expand...
Click to collapse
that distortion is very suspicious; smells like hardware failure or flash corruption

whgarner said:
might try to downgrade radio first as rc29 may not work with .26i radio. warning--brick phones have been known to occur with earlier radios and some spl (ie deathspl) which you do not have.
bill g.
Click to expand...
Click to collapse
I've considered downgrading just a radio part to 1.22.12.29.
But I can't find a separate radio 1.22.12.29 or any info about weather it's possible at all.

Might try rename the image to "update" (zip will be added automatically but not seen) and install from spl. press end and home at startup to get into spl.
bill g.

try downloading dreaimg.nbh again, i had a shtload of trouble with corrupted nbh files, i though my phone was bricked for 3 days lol

Use RC7 instead of 29, bye bye error.

whgarner said:
Might try rename the image to "update" (zip will be added automatically but not seen) and install from spl. press end and home at startup to get into spl.
bill g.
Click to expand...
Click to collapse
SPL says files in update.zip (with DREAIMG.nbh) is not signed

xxmonsterx said:
try downloading dreaimg.nbh again, i had a shtload of trouble with corrupted nbh files, i though my phone was bricked for 3 days lol
Click to expand...
Click to collapse
I've used the same SD card with same FW file to root another G1 fine

reflash the stock spl and try again. hit me up on androidoverdrive.com (b-man007) if you still have problems

shadowch31 said:
Use RC7 instead of 29, bye bye error.
Click to expand...
Click to collapse
AFAIK RC7 goes for European G1 version, mine looks to be an US version.

shadowch31 said:
Use RC7 instead of 29, bye bye error.
Click to expand...
Click to collapse
I put my IMEI at http://service.htceurope.com/htcdistributor/Default.aspx
SN :HT92DGZ00316
IMEI :3516800***
Part Number :99HEW003-00
Part Description :SKU,TMUS,English-WWE,USA,w/o SIM Card,Black,HSUPAdisable,w/ SIM Lock,DREAM-O6
Customer Name :HTC USA INC.
Customer Model :
HTC Model REAM-O6
So, this is an US version.

bestrafer said:
AFAIK RC7 goes for European G1 version, mine looks to be an US version.
Click to expand...
Click to collapse
edit: nvm, read it wrong ><

is ur phone pvt or dvt?

fh47qu said:
is ur phone pvt or dvt?
Click to expand...
Click to collapse
look at the first message with pictures - it's PVT

Wrong section btw...

Probles Falshing A New ROM

Ok, so I went to flash a new ROM on my phone, and when I go to the run the RUU, I get the screen with the 4 steps to complete, which are already completed, then hit next. Now I get "Error [240] : File Open" and below that it says "The Update Utility cannot open the requested file. Please check the update utility."
I tried downloading the Update Utility again, but it still does the same thing. Ive flashed my phone before, and Im pretty sure Im not doin anything different this time, but its not workin. Am I missing somethin?
Thanks

new-b said:
Ok, so I went to flash a new ROM on my phone, and when I go to the run the RUU, I get the screen with the 4 steps to complete, which are already completed, then hit next. Now I get "Error [240] : File Open" and below that it says "The Update Utility cannot open the requested file. Please check the update utility."
I tried downloading the Update Utility again, but it still does the same thing. Ive flashed my phone before, and Im pretty sure Im not doin anything different this time, but its not workin. Am I missing somethin?
Thanks
Click to expand...
Click to collapse
Check if your harddrive isn't full.
A RUU extract some files, and if your harddrive is full it can't

Nope, its not full. Far from it actually lol.

new-b said:
Nope, its not full. Far from it actually lol.
Click to expand...
Click to collapse
flashing trough sd-card?

im having the same problem i get the error code as well, is it possble to flash from the microsd. I am a nooby at this and understand how to flash.

xmoo said:
flashing trough sd-card?
Click to expand...
Click to collapse
Nope, win mo device center.
WeaponX2010 said:
im having the same problem i get the error code as well, is it possble to flash from the microsd. I am a nooby at this and understand how to flash.
Click to expand...
Click to collapse
Its in the tutorial, but I havent tried it yet. Ive never had a problem flashing through the USB before.

Tried it from the SD card. Went great. Just takes a little longer.
Still open to suggestions about usin active sync though.

xmoo said:
Check if your harddrive isn't full.
A RUU extract some files, and if your harddrive is full it can't
Click to expand...
Click to collapse
Hi xmoo. Can YOU please help? With this:
leo70 said:
URGENT MAJOR HELP REQUIRED *PLEASE*:
I am stuck on DFT boot screen (after doing 1234-vol up_down-wp7-reset) and this is *after* (wp7 here !) all the chains b4 that are done: ie: power on, hspl, htc, magldr- for windows phone 7 on hd2. Sometimes get thru to windows phone 7. but generally reboots. Done spl back to stock and leoimg on sd back to stock and tried task28s, 29s, etc but just reboots constantly and randomly.
Any thoughts here? What is warranty process? DO they replace at all with NEW? or new BOARDS/RAM? Gone back to 1.66 spl and sent in for repairs. because - the stupid recommended Romupdateutility HTC stock rom 'upgrade' did this damage. yes, was Windows Phone 7 and activated using dev hack with marketplace & xbox/live. Also - although I activate ok and can use it on market fine once it boots good - still when both my hd7 (hd2) and Mozart are signed into XboxLive using same address at same time: (mozart is legit fully/eula-signed etc) then the hd2 seems to reset a LOT here at this point. maybe this has something to do with usual xbox-live security? ie: http://www.wpcentral.com/hack-xbox-live-windows-phone-7-get-perma-banned-microsoft ?????????? please hlp me - I am fully capable of mtty, sd-leoimg, whatever it takes- but need to know why this would be the case? same with Android roms/stock too. Anyone know about task2a on hd2? how many bad blocks I should have? partition/re-partition droid or wp7 to avoid these bad blocks? I just WISH Cotulla/DFT let you run the windows phone 7 installer in such a way that all bad bloks could be excluded totally as if the never exist... ie make hd2 clean.
Click to expand...
Click to collapse
note: although I have gone bak to original spl+rom in past I have (both unsuccs &succesfully) have previously done task2a and even spl-mfg install and radios/roms as DEBUG/SPL-MFG. xmoo?

[Q] [HELP] I did RTFM and still have a problem !!

Hi,
Check out my bootloader screen, this doesnt look ok to me
Tried loading severel older radio's / rom's they all fail after 1, 4 or 19 % with the second error included as a jpg!
Can someone help me fix my 2nd HTC HD2 ?
TIA

Most recently, there seem to be quite a few people having issues with defective bootloaders. Somewhere in another thread, some guys actually were able to bring back the correct SPL with this method:
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
Click to expand...
Click to collapse
The key difference and important point is to take out the battery, keep it out for a while, and pushing the bootloader buttons while re-inserting the battery (yes, can be a little tricky).
The LEOIMG.NBH should be a ROM which is made for your device, eg. the stock ROM which was original on your device when it was brand new. If you´ve got a Leo1024 (US device), please make sure twice you´ve got a correct ROM. A wrong Radio ROM can completely brick your device, only professionals could fix that.
In case you don´t know where to get the leoimg.nbh file: Download the stock ROM for your device, decompress the RUU.exe file with WinRar (or a similar program), rename the nbh file which you´ll find in the decompressed files to leoimg.nbh, there you go.
The SD card should be freshly formatted FAT32.
Hope it works that way...

Thanks, havent tried it with the battery out for longer then 3 seconds. When i put a stock rom on the sd it just says loading, then checking and then it boots back to the bootloader!!! Gonna try it again but keep the battery out longer.

complot said:
Thanks, havent tried it with the battery out for longer then 3 seconds. When i put a stock rom on the sd it just says loading, then checking and then it boots back to the bootloader!!! Gonna try it again but keep the battery out longer.
Click to expand...
Click to collapse
Just some questions.
- Witch SD-Card do you used? a 2GB SD-card is preferable. (And be format by FAT32.)
- Witch Stock Rom did you use?? Did you download it from the HTC webpage by using your S/N?
- And I don't know if you know it, but you need to rename the RUU_signed.nbh to leoimg.nbh.

1GB
RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
And i renamed it
It says loading, then instead of giving the screen with all the options that you see in the youtube video it says checking and on top it shows the following numbers 00058002

complot said:
1GB
RUU_Leo_S_HTC_NLD_3.14.404.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
And i renamed it
It says loading, then instead of giving the screen with all the options that you see in the youtube video it says checking and on top it shows the following numbers 00058002
Click to expand...
Click to collapse
Just to be sure; your device is a Dutch version? and you downloaded the stock ROM by using Your S/N? (this is important)

On the HTC website there are 3 rom's to be downloaded.
1 = Vodafone and my sn doesnt allow me to use that one.
2 = My SN allows me to download this one and is from 02-02-2010:
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
3 = My SN allows me to download this one aswell and is from 19-12-2009:
RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
Wich one should i try?

complot said:
On the HTC website there are 3 rom's to be downloaded.
1 = Vodafone and my sn doesnt allow me to use that one.
2 = My SN allows me to download this one and is from 02-02-2010:
RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
3 = My SN allows me to download this one aswell and is from 19-12-2009:
RUU_Leo_HTC_NLD_1.48.404.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
Wich one should i try?
Click to expand...
Click to collapse
Take this one; "RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.0 7U_2.06.51.07_Ship.exe"
PS; download from there second serer (Europe 2) (the first one have lot of problems)
PS 2; not sure if it will help/work. Your bootloader is corrupt.

kurt-willems said:
PS 2; not sure if it will help/work. Your bootloader is corrupt.
Click to expand...
Click to collapse
That one didnt work!
I will try the other one aswell!

complot said:
That one didnt work!
I will try the other one aswell!
Click to expand...
Click to collapse
Not needed, it's the same except the photo update and some minor updates.

Nope, unfortunatly that didnt work neither.
Damn this sucks donkeyballs man.

kurt-willems said:
Not needed, it's the same except the photo update and some minor updates.
Click to expand...
Click to collapse
So, im fuc*** now?

complot said:
So, im fuc*** now?
Click to expand...
Click to collapse
hmm, for the moment I don't see a direct solution.
But just a question; how was this issue created/started?
I mean when did this problem become, what did you do?

I wanted to put android on my daughters hd2, i started working with this newb guide:
http://forum.xda-developers.com/showthread.php?t=893948
Step 1 finished well i think:
1. YOU NEED A RADIO WHICH SUPPORTS 576 RAM (2.08.50 or later should be fine but the Radio NEEDS to be 2.**.50.**). I recommed the 2.15.50.14 Radio *HERE*
Then i did the HRDSPL bit and it showed we hacked it, then i did the magldr shizzle and it got screwed!

This is the screen is get btw!

Cant believe that this is it? I can toss the phone away now? Anyone?

This might be alil' stupid, but have you tried Task29 ?
P.S: Your tags to the thread are ~~~> xD !!

Thanks but i tried that, ClydeB1 gave me the a tip to try and will do so in 8 hours from now
ClydeB1 said:
I see that your model id in your screenshot of the bootloader screen seems all screwed up. This is an old fix I stumbled across to allow users to bypass the model id check when running hspl, you may want to give it a go.
Click to expand...
Click to collapse

That **** didnt turn out as wanted, i can flash it to 2.08.0000 and 2.08 hspl now but still cant flash stock rom
Goldcard is next on my to do list it seems !!
http://forum.xda-developers.com/showthread.php?t=825397

Before goldcarding,
Since your bootloader is corrupted, you can try SSPL?
Give it a shot, you have nothing to lose. (Except to completely brick your phone )

htc wildfire hang on HTC how to solve??help pls

help mates i have htc hang on logo only..
i did reset clear storage but still same...
i also try to update the rom using sd card.but it not works..
anyone pls help me give idea how to solve this problem..
if i put to recovery mode it showing RED sign and phone..

richard_xcellent said:
help mates i have htc hang on logo only..
i did reset clear storage but still same...
i also try to update the rom using sd card.but it not works..
anyone pls help me give idea how to solve this problem..
if i put to recovery mode it showing RED sign and phone..
Click to expand...
Click to collapse
Have you tried flashing an RUU?

djdevine2 said:
Have you tried flashing an RUU?
Click to expand...
Click to collapse
can u tell how to flash this phone..im newbie on this problem that's why.?
pls let me know how to flash this phone..
tnx in advance....

someone pls help me.............................

Is the phone rooted?
Did you start this with rom manager?
Do you have a recovery flashed?
Did you do a full backup beforehand?
- Posted via mobile

how can i by pass that red exclamation point to install the file from sd card....

Avid Droidery said:
Is the phone rooted?
Did you start this with rom manager?
Do you have a recovery flashed?
Did you do a full backup beforehand?
- Posted via mobile
Click to expand...
Click to collapse
i take the phone like this htc hang logo no backup.
can u pls share the rom manager for htc wildfire....

http://www.google.com/gwt/x?gl=us&c...roubleshootingandErrorRecoverySprintTP2MR.pdf
Sorry but I've never heard of anything like that. There should be a recovery tool for windows. I only have this phone so you will have to investigate for yourself.
Keep looking in this thread someone else will come along soon.
I hope this helps.
- Posted via mobile

Aha! I googled it out 4 u i tink...
http://forum.xda-developers.com/showthread.php?t=881138
* edit maybe i shouldnt try to be so helpful
I believe your question can be answered in that forum.
- Posted via mobile

Avid Droidery said:
Is the phone rooted?
Did you start this with rom manager?
Do you have a recovery flashed?
Did you do a full backup beforehand?
- Posted via mobile
Click to expand...
Click to collapse
how can i know this phone is rooted phone status now is hang on htc logo?
and how to rooted this phone...
can u pls help me bro..tnx

Avid Droidery said:
Aha! I googled it out 4 u i tink...
http://forum.xda-developers.com/showthread.php?t=881138
- Posted via mobile
Click to expand...
Click to collapse
thnk u very much bro...i really apreciate your effort to give me a help...
now downloading ill post wat result...thnk u so much...

I haven't used a windows phone in years! I did not realize your phone was windows until I sent you that link. Please follow the thread and post your questions here -->
http://forum.xda-developers.com/showthread.php?t=881138
- Posted via mobile

It's obvious your phone is not rooted. Try flashing an RUU.
1: Visit here:
http://shipped-roms.com/index.php?category=windows mobile&model=Buzz
2: Get any Eclair RUU,
RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.35.19.25_release_151892_signed.exe
(I am assuming your phone was not operator locked / branded)
3: Connect your Wildfire to your PC, and, run the EXE file. (Note: Make sure the EXE file downloads fully. It is approx 130 MB in size)
4: Let the process complete (Takes ~15 minutes)
If it is successful, check whether the phone starts up properly or not. If it still doesn't, return it to you dealer and claim your warranty.

3xeno said:
It's obvious your phone is not rooted. Try flashing an RUU.
1: Visit here:
http://shipped-roms.com/index.php?category=windows mobile&model=Buzz
2: Get any Eclair RUU,
RUU_Buzz_HTC_WWE_1.37.405.1_Radio_13.53.55.24H_3.35.19.25_release_151892_signed.exe
(I am assuming your phone was not operator locked / branded)
3: Connect your Wildfire to your PC, and, run the EXE file. (Note: Make sure the EXE file downloads fully. It is approx 130 MB in size)
4: Let the process complete (Takes ~15 minutes)
If it is successful, check whether the phone starts up properly or not. If it still doesn't, return it to you dealer and claim your warranty.
Click to expand...
Click to collapse
i try this procedure but i get error 131...
how 2 solve this problem...

richard_xcellent said:
i try this procedure but i get error 131...
how 2 solve this problem...
Click to expand...
Click to collapse
Is your phone an operator branded one?
Anyway, to solve that, you will need to create a goldcard. Guide here:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
But remember, if your phone is branded, this will remove their ROM and add a stock HTC WWE (Worldwide English) one, probably voiding the warranty if there is no RUU for your carrier.

problem solved i flash with same version..
tnx to all....

Moved thread to general as it is not about android development

help please!! htc hd2 tmobile software update failed.,! cant use my phone now.

i have here my phone htc hd2 i update the rom,but it stock to 8% then i tried the sdcard process but it also stock at around 5%...now whenever i start my phone it have a error saying software update failed please try again..i did a couple research and i think i will not supposed to do it by my self..,i need a professional and experienced dude to pLEASE help me with this.,,please please please...im a newbie here,,

what are you updating? the windows mobile rom 6.5?

luciferps said:
what are you updating? the windows mobile rom 6.5?
Click to expand...
Click to collapse
no sir i just wanna open up my phone..,i dont know 1 day it was working fine then the battery drained then when i open my phone it was stock at stick together screen..so i plan to update the rom.,,,I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside? I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
hope you can help me sir..i see there that we have the same phone..,
btw here what in my rainbow screen
RUUNBH
PB81120 SS-B3
SPL-2.08.HSPL 8GXE
0x05
CotullaHSPL 0x05
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN

WHen i was googling rom version 2.13.531, i happened to notice this post, from september 2010, , , (source)
Thank you for the reply.
I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside?
I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
Click to expand...
Click to collapse
call me Mr suspicious, but compare the wording to your post...
miko30 said:
no sir i just wanna open up my phone..,i dont know 1 day it was working fine then the battery drained then when i open my phone it was stock at stick together screen..so i plan to update the rom.,,,I have tried to do a hard reset but it reads "software update failed and to please try again."
When I try to update the file again, the phone freezes at 8% complete.
When doing the update, it appears as though the phone does not have any software in it.
It reads updating from " " to "2.13.531" . If it does not detect a number, does that mean because the software update failed, it erased the software inside? I downloaded it from the T-mobile website. The file reads: T-Mobile_HD2_MR_Software_2.13.531.1(2)
hope you can help me sir..i see there that we have the same phone..,
Click to expand...
Click to collapse
amazing that two posts, almost two years apart are identical.

samsamuel said:
WHen i was googling rom version 2.13.531, i happened to notice this post, from september 2010, , ,
call me Mr suspicious, but compare the wording to your post...
amazing that two posts, almost two years apart are identical.
Click to expand...
Click to collapse
ahaha,,sir i copied that post and post it here because we have the same problem here..,and that post didnt give any idea how can i fix it..,so i tried here at xda dev.forum ..maybe someone can help me.,, i cant find any stock rom for my phone..and also i didnt know what current rom applied to my phone.,
all i just want is boot my phone back to its life.,,please please help me..im trying to fix this phone all day and nothing works..,until now im still searching to make my phone boot..,its allready 12:05am here gotta go to bed now..and i hope someone tommorow can help me thru this.,,THAnks btw for your reply

lol, fair enough.
ok, take the ROM.exe (that you downloaded from t mo,, it is definitely a tmous, right? green send key?)
anyway, right click the .exe file,, choose rename, change the .exe to .zip, then double click the zip file to open it, find Ruu_signed.nbh, extract it, rename it to leoimg.nbh , copy it to an Sd card that is 4GB or smaller (important, bigger cards won't work)
card into phone, reboot into bootloader, flashing should staRt. tell us what the blue writing on grey background says.if you don't see it you did something wrong.

samsamuel said:
lol, fair enough.
ok, take the ROM.exe (that you downloaded from t mo,, it is definitely a tmous, right? green send key?)
anyway, right click the .exe file,, choose rename, change the .exe to .zip, then double click the zip file to open it, find Ruu_signed.nbh, extract it, rename it to leoimg.nbh , copy it to an Sd card that is 4GB or smaller (important, bigger cards won't work)
card into phone, reboot into bootloader, flashing should staRt. tell us what the blue writing on grey background says.if you don't see it you did something wrong.
Click to expand...
Click to collapse
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,

miko30 said:
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,
Click to expand...
Click to collapse
If you are absolutely sure that the ROM you downloaded (and the radio it contains) are the right ones for your phone, then go to the boot loader and see what it says for SPL. If you do not find HSPL, flash HSPL 2.08 and then try the ROM.
Flashing aborting or getting stuck early on is an indicator of the flashing process bring stopped by SPL...
Swyped from my HTC HD2 using XDA Premium

miko30 said:
sir allready tried that solution but it only get stuck after 5% on the blue bar..,,then it doesnt continue at all..,
Click to expand...
Click to collapse
Samsamuel can tell you better but it sorta sounds like yet another stuck radio seeing as it is hanging at the 5% to the 8% area during flashing. I am not sure exactly when but hang in there and let Samsamuel post again he can give you your list of options better than I, hope you get it going again my friend.
---------- Post added at 11:08 PM ---------- Previous post was at 11:03 PM ----------
ph03n!x said:
If you are absolutely sure that the ROM you downloaded (and the radio it contains) are the right ones for your phone, then go to the boot loader and see what it says for SPL. If you do not find HSPL, flash HSPL 2.08 and then try the ROM.
Flashing aborting or getting stuck early on is an indicator of the flashing process bring stopped by SPL...
Swyped from my HTC HD2 using XDA Premium
Click to expand...
Click to collapse
If it was a SPL issue then that means it is a CID or a MID issue and if it is that then the Rom would not even start to flash at all no matter if it is via RUU or SD card. If the CID or the MID is wrong it would through a error saying something like "CID mismatch" or "Model I'D mismatch" when trying to flash.

T-Macgnolia said:
Samsamuel can tell you better but it sorta sounds like yet another stuck radio seeing as it is hanging at the 5% to the 8% area during flashing. I am not sure exactly when but hang in there and let Samsamuel post again he can give you your list of options better than I, hope you get it going again my friend.
Click to expand...
Click to collapse
how can i check my radio version?? i cant boot my phone.,,when i open my phone it says software update failed please try again..,before i change my spl..the version that i got there is (spl 2.10) then i change it to (2.08) so i can try to reflash thru sdcard..btw i got the rom from the htc-tmobile website,.it something like 3.xx.xx.xx like that...i dont know where i can find a stock rom for my phone...please help..
HERE THE VESION IM TRYING TO UPDATE MY PHONE..I GET FROM TMOBILE WEBSITE version 3.14.531.1
anyone?? what if i try to use a diff radio like this radio LEO 2.15.50.14 ??

miko30 said:
how can i check my radio version?? i cant boot my phone.,,when i open my phone it says software update failed please try again..,before i change my spl..the version that i got there is (spl 2.10) then i change it to (2.08) so i can try to reflash thru sdcard..btw i got the rom from the htc-tmobile website,.it something like 3.xx.xx.xx like that...i dont know where i can find a stock rom for my phone...please help..
HERE THE VESION IM TRYING TO UPDATE MY PHONE..I GET FROM TMOBILE WEBSITE version 3.14.531.1
anyone?? what if i try to use a diff radio like this radio LEO 2.15.50.14 ??
Click to expand...
Click to collapse
I do not want to highjack this thread so after this post I will be contacting you via PM, or if you use G Talk you can hit me up on that. If you have a TMOUS HD2 I have the 3.14 stock RUU for theTMOUS HD2 on my computer and I can upload it for you if you want. But I think the ROM you have is the same as the one I have.As far as checking your radio version if you can not boot your device at least to the T-Mobile screen with the red text at the bottom left corner then you can no check your radio version.

T-Macgnolia said:
I do not want to highjack this thread so after this post I will be contacting you via PM, or if you use G Talk you can hit me up on that. If you have a TMOUS HD2 I have the 3.14 stock RUU for theTMOUS HD2 on my computer and I can upload it for you if you want. But I think the ROM you have is the same as the one I have.As far as checking your radio version if you can not boot your device at least to the T-Mobile screen with the red text at the bottom left corner then you can no check your radio version.
Click to expand...
Click to collapse
do you have any facebook account sir,,maybe we can contact each other thru facebook..,yeah maybe that should work 3.14 ruu sir..,can you upload it on mediafire sir if its ok to you..and i cant go thru that t mobile screen with red text sir, when i open my phone it just stuck on black screen with a message "software update failed please try again.." and whats up with the vibrating?? my phone keeps vibrating..

yea I'm with TMacgnolia, , sounds like a stuck radio (albeit it's sticking earlier in the process than expected, perhaps indicating the stuck spl variant.)
combined with the vibrating I'd be thinking hardware, so I'd be trying sd flashing using the freezer trick.

samsamuel said:
yea I'm with TMacgnolia, , sounds like a stuck radio (albeit it's sticking earlier in the process than expected, perhaps indicating the stuck spl variant.)
combined with the vibrating I'd be thinking hardware, so I'd be trying sd flashing using the freezer trick.
Click to expand...
Click to collapse
sir yeah we manage to install a custom rom but the problem now is i think its on the cpu..,is there any way to fix this hardware problem..,

I could use some help, having the problem described earlier. I can't get past the 4color boot loader screen, - for a fraction of a second it goes to the insalling screen then comes back to 4color with "Serial" in the white.
Here is what I have on my HD2: Android 2.3.5 Radio 15.42.50.11U_2.15.50.14
Here is what I have tried to install through sd card: RUU_Leo_1_5_TMOUS_2.13.531.1_Radio_15.39.50.07U_2.10.50.26_Signed_LEO_Ship.zip (renamed .zip, was .exe) and T-Mobile_HD2_MR_Software_3.14.531.1.zip (renamed .zip, was .exe)
I tried 3 different sd cards; (2) 2 gig cards (1) 4gig cards. I reformated several times before copying and renaming the nbh file.
What next? Thanks

just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.

samsamuel said:
just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.
Click to expand...
Click to collapse
Thanks. That makes sense. I can't check for 6 or 7 hours until I get home for the day. I'm using W7, and have never really gotten how to view the real extension on a file, not like the good old DOS days. yes I have a tmous. After requesting the help, I tried the same card in my brother's HD2 that I need to restore as well, and got the same response, so it has to be the card/name not my HD2. I'll post back when I check it out. Thanks again.

samsamuel said:
just to confirm, you rename the exe to zip, open the zip, extract Ruu_signed.nbh, rename that to leoimg.nbh, copy that t sd and reboot, correct?
also, please confirm that you do in fact have a tmous.
the brief flash usually means the file was renamed incorrectly, for example depending on the file extension settings, it has been known for a file to end up getting called leoimg.nbh.nbh
the fact that it flickers means it is detecting something, but finding a problem.
Click to expand...
Click to collapse
I renamed the file, making sure there was only one .nbh extension. Still not working. I tried it with both tmos roms, I reformated the card, I tried it on both phones. Obviously, I have done something wrong with the file, but read and re-read the instructions and I can't find what it is.
Any ideas would be great.