Out of the blue my camera started taking tie dye-looking pictures. I can't think of any event (water, dropping etc.) that could have caused this. Any ideas?
Are you using windows mobile or android?
Camera is semi-broken under android.
If it's windows mobile...clean the lens, that's about all the maintenance you can do to it AFAIK.
Related
hay i recently dismantled my HERM100 to figure out why my battery life went to hell, and where most of the heat in the front was being generated, as it turns out i have a short somewhere in my Front camera board, and need a replacement.
does anyone know (preferably in australia) where i can get the component, other than on ebay, or is anyone willing to sell a "bricked" hermies so i can just swap the mainboards round and go?
this also seems to be messing my camera functions, and front led's have gone dull, other than that its working fine.
but if anyone has known this to be a software issue in the past, this fault only became apprent after i updated the boot loader, and software for the wi-fi/GSM and OS, or it was just going to do it at that verry moment becuse murphy hates me!
on another note is there a copy of windows mobile 6 that will work with PDA's as reasion being i recently handed over my old HP-R17 somthing or rather, to a friend who needed one, as fortune follows he like my self hates the ok button that dosent close squat, but minimises things and i am feeling that the taskmanager designed for WM6 wont work on a pda with WM5 that too and he would prefer to update, just wondering if anyone has tried this before!?
ps ... bump!
FIXED
i managed to fix it, it was a shorted capacitor on the camera board connected to U2, i think it was U2, but it only was connected to the LED's this cap is connected to the Ground and positive going rail and is mostly a filter cap, it was a little burnt and fell off easly after which all worked cool again and no problems with either the front camera or the main camera.
this thing was so small it was only visable as a faulty component under a high power magnification
Few days ago, my camera started giving me problems. I get green ish and pink ish distorted image all over. And when I snap, the picture taken is all green (or grey when seen in resco picture viewer).
Actually I hardly use the camera. Although the camera in my opinion is quite ok but not that great and furthermore, I prefer not to waste my battery power by taking camera shots with my Dopod u1000. i usually use my sony errisson k850i instead for taking pictures.
Therefore I can live with not having a camera on my Dopod u1000. But if anyone can enlighten me about why my camera can suddenly become like this I will find peace of mind.
Could it be the cmos sensor problem and if it is then how to fix it? Is it something I cannot do by myself but must go back to HTC service center?
Is it camera drivers problem? I know that the device must have some drivers in built such as the USB and microdrives drivers and that these drivers doesn't come with the rom upgrades.
I did disassemble the unit for other reasons but I suspect the problem was not because of the disassembling the unit. In fact if I remember well, there was something not quite right with the last camera shot I took even before I disassembled the unit. I clicked and the screen went dark for quite a while before the picture appeared.
Thanks
I found an interesting website about cleaning the camera sensor. Unfortunately, there is a negative side to all the methods recommended. That makes it look like it has to be left to professionals. But the problem is camera professionals will not know how to dismantle our Dopod u1000 pocket pc even though they know about digital cameras. they might damage other parts of the pocket pc. So, it has to be either done personally or it has to be done by HTC service department.
http://www.cleaningdigitalcameras.com/index.html
I'm experiencing the same problem and quite sure that is a software problem. I swith the jpg compression from Super Fine to Fine and apparently the problem is gone. When I tried to get back to Sufer fine the problem restart. I would recommend that you reinstall the SW for image if nothing else help. if some one come out with another approach I would like to hear.
cphilip, how did you settle the strap, using the speaker grilled door? it's strong enough? it's something that I miss in my Advantage.
Yes. The anthena casing is made of aluminium. Very strong. Not plastic. At least the casing of my Dopod u1000 is strong and I would believe the Athena is the same. My friend accidentally dropped his unit on to hard floor but the internal parts are perfectly protected by the strong casing. the plastic cover around the camera and the bottom battery cover are the weak parts and can be broken if not careful.
I would love to get the software drivers for the camera. When we buy laptop or desktop, we are usually provided with a set of drivers for the components connected to the main board. Unfortunately, for Pocket pc, we are not given a set of drivers (softwares) so that we can reinstall if anything gets corrupted. I doubt if the some of these drivers comes together with the ROM upgrades for the Athena. The ROm upgrades for Athena are mostly made up of the Windows Mobile operating system that is designed to work with the Athena correct me if I am wrong on this.
Even though I love Michy's WM6.1 ROM, I have already reflashed my unit with the Dopod windows mobile 6 stock rom and the camera is still the same.
BTW, I used a simple string to go through the grill and when I manage to pull the string out from the other side, I tie the string to my strap. then I carefull pull the string to guide the strap through the grills.
Thanks, I though about the same but was affraid the strap will eventually broken the case speaker grill. will do it now.
on the camera problem check on this fórum for the HTC camera and camera album software download and try them. it may bring your camera to live again.
Although the grill of the athena cover is strong But I wouldn't advise on swinging the device with your strap because the string of your strap might wear down and snap if you do it often enough. For me, I like to have the strap around my wrist when reading an ebook in public places because i feel some extra security just in case i accidentally let go of my Athena.
did you get any progress on making your camera working?
rcf2
thanks for your concern and suggestions. unfortunately, i downloaded and tried the softwares but still not resolved. At the moment I am just using my U1000 without the camera and all is fine. if i need to take pictures i will just use my k850i.
But will definitely appreciate any new ideas that might help to restore the camera. Until than the other features of the Athena x7500 is provinding almost all my mobile computing needs. Thanks
cphilip said:
rcf2
thanks for your concern and suggestions. unfortunately, i downloaded and tried the softwares but still not resolved. At the moment I am just using my U1000 without the camera and all is fine. if i need to take pictures i will just use my k850i.
But will definitely appreciate any new ideas that might help to restore the camera. Until than the other features of the Athena x7500 is provinding almost all my mobile computing needs. Thanks
Click to expand...
Click to collapse
Try to use any other camera application
such as cool camera
i just bought a used samsung focus. It is working perfectly except for 2 things.
1) Camera is very bad, no pictures come out well and its not very good
2) The proximity Sensor is not working, i have looked at the service menu for the samsung focus and the box is always red and no number is ever showing (reg shows 0)
ANY HELP WILL BE APPRECIATED, im panicking and very sad
Also, i was wondering is there a way to completely reset the phone, and redownload and install the operating system. maybe the software is busted?
Try one of these ROM's to re-flash the phone.
http://forum.xda-developers.com/showthread.php?t=1131022
yeh id do as fido said ad relash, sounds like someone gave you a toasted phone or did something to it, because honestly the focus phone cam is the best i've ever had.
I thought it took crappy photos too, until I discovered if you half-press the shutter button then it allows the phone to focus better (and in dark situations it uses a filler-flash so it gets a clearer pic with less of the flash white wash). Since then I've gotten some great photos, even had one used in a newspaper!
Just curious, how many of you have had your camera button start to malfunction?
After 1-2 months of use, it got to the point where I could no longer focus on an image before snapping a picture... I was stuck taking "Quick pics", if you know what I mean...
Fortunately, with Mango, I can tap the screen to focus now, but I was just curious if this is happening to many?
A poll might help you better.
mine works fine, but i tend to use the tap to shoot more than the button just because i can tell it what to focus on.
Same issue
Yes - I have this issue on mine, too. I didn't see it until I was running the Mango pre-release software in July/August, so I assumed it was related to something in the software. The official Mango update didn't make it any better, so I'm starting to think the pre-release software correlation was just coincidental and it's actually something mechanical with the button/switch.
Mine also has started behaving this way, for almost a year now. It's not consistent either. Sometimes it works perfectly, and sometimes I have to dig my fingernail into the button just to get the camera app to even open.
I have the same issue. My focus is 18 months old though, so I thought it was just worn out. It used to work with mango. I am now running a custom tango rom, so maybe it is software related...
Sent from my SGH-i917 using Board Express
This is not a software issue. Though I am curious, has anyone managed to disassemble the phone and clean the button or would it need to be replaced?
Hello Team,
I've had my Essential Ph-1 for several years and loved it. Recently I replaced the battery with no issues. However, I notice that since replacing the battery, the stock camera app would not launch with an error initializing the camera, and it said to restart the phone. Rebooting the phone made no difference.
I opened the device back up and carefully checked all the wires and connections, and they're all tight and nothing looks cut, cracked, or disconnected. I tried a third party camera app (OpenCamera), and it worked fine on the front facing camera, but the rear camera was in black and white only. Since then I have tried factory resetting and re-flashing the firmware, and now the front camera works (in third party app) but the rear camera is not even recognized and I don't get an option to swap cameras.
Any suggestions? Is there anything I can check to troubleshoot this further?
TIA!
jbstanford said:
Hello Team,
I've had my Essential Ph-1 for several years and loved it. Recently I replaced the battery with no issues. However, I notice that since replacing the battery, the stock camera app would not launch with an error initializing the camera, and it said to restart the phone. Rebooting the phone made no difference.
I opened the device back up and carefully checked all the wires and connections, and they're all tight and nothing looks cut, cracked, or disconnected. I tried a third party camera app (OpenCamera), and it worked fine on the front facing camera, but the rear camera was in black and white only. Since then I have tried factory resetting and re-flashing the firmware, and now the front camera works (in third party app) but the rear camera is not even recognized and I don't get an option to swap cameras.
Any suggestions? Is there anything I can check to troubleshoot this further?
TIA!
Click to expand...
Click to collapse
As it's happened at the same time as battery replacement you'd have to think the two are related. Possible try a "simulated battery pull" to ensure camera is powered down, that is a force restart, press power button & vol driven together for 15secs (I think). If this doesn't work try disconnect/reconnect any components related to camera. Only other thing I can think of is the camera or related component has received ESD damage form static electricity (most likely a diode or small IC), maybe you can find a cheap bricked or damaged phone for spares, if camera module expensive, assuming it's the camera.
Appreciate the response. I think you're right. I've forced restarted and flashed it back to stock, and while the stock camera doesn't work, I found that if I use a third party app (such as OpenCamera) the rear camera works in Greyscale only (not in Color).
IronRoo said:
As it's happened at the same time as battery replacement you'd have to think the two are related. Possible try a "simulated battery pull" to ensure camera is powered down, that is a force restart, press power button & vol driven together for 15secs (I think). If this doesn't work try disconnect/reconnect any components related to camera. Only other thing I can think of is the camera or related component has received ESD damage form static electricity (most likely a diode or small IC), maybe you can find a cheap bricked or damaged phone for spares, if camera module expensive, assuming it's the camera.
Click to expand...
Click to collapse
jbstanford said:
Appreciate the response. I think you're right. I've forced restarted and flashed it back to stock, and while the stock camera doesn't work, I found that if I use a third party app (such as OpenCamera) the rear camera works in Greyscale only (not in Color).
Click to expand...
Click to collapse
hummmm ... Yes, hard to say for sure boat seems like some hardware issue on the color camera, hope you can find a simple fix.
Appreciate the followup. After looking farther. I see there is a hairline crack in the camera. I bought a parts EssentialPH1 off of eBay for ~$50 and will give swapping them a shot.
jbstanford said:
Appreciate the followup. After looking farther. I see there is a hairline crack in the camera. I bought a parts EssentialPH1 off of eBay for ~$50 and will give swapping them a shot.
Click to expand...
Click to collapse
that would likely explain it, hope you fix it easily (see the video on youtube from Fixeze & ifixit if you haven't already