Related
SOMEONE PLEASE TELL ME WHAT THE HELL I'M DOING WRONG!
This always happens to me! To be quite honest, I wish I understood Cingular/AT&T or even more so the WINDOWS MOBILE 5 AND 6 CONNECTION SETTINGS and HOW TO CONFIGURE THEM PROPERLY! I just don't get it! I'm a well educated and very experianced Microsoft Network and Systems administrator for a LIVING!!! and this is like STUPID for me!
someone please help me out.
I'm in New York on AT&T's network with the 8525. I am an accomplished ROM Flasher and I am on Schap's WM6 v4.30
As usual, as soon as I flash, internet explorer works and i go to configure my pop gmail and it successfully get the gmail settings. go to connect for the first time to download my mail and it fails.... i tried to installed the cab called Cingular WAP MEdiaNet MMS Settings v2 and that doesnt work. it just adds the MEdia Net as an optional connection. I used to use the wpbear thing to get the proxy remove and restore things.. still nothing! so now i have a freaking interview tomorrow and its 1 am and im still ....ing around with the damn thing and i dont have internet, mail or connectivity to anything!!!
theres ISP, WORK and MEDIA NET... what the hell are any of these things?! i need a stupid tutorial to explain the most basic freaking thing on a pocket pc phone!
frustrated is NOT the word... ready to throw the phone out my 2nd story window as far as i can is more like it!
Schap's.. great job on the new rom.. i love it as i have loved all the others.. but this stupid at&t settings is KILLING ME!
*update* its 1:30 and im still futzing with this thing.. I used the REMOVE PROGRAMS icon and uninstalled the wpbear and cingular wap settings. i got INTERNET EXPLORER BACK but i cant get mail to work. it says Error Syncronizing. and then the typical message "Cannot connect with current connection settings. To change your connection settings, tap Settings."
In Network Management i have programs that automatically connect to the internet should connect using: MEdia Net
Programs that automatically connecto to a private network should connect using: My ISP
I only have this problem with my gmail accounts. YES i have them set to pop online. hotmail and windows live works fine.
had the same problem
What i had to do was goto connections >> connections
Advanced tab
Selecy Networks
Click the drop down, Media net should be fine
IE if you goto edit it says wap.cingular
Now hit that drop down and goto my isp
And you have to change the APN to wap.cingular
then on the username/pass screen
username: [email protected]
password: CINGULAR1
domain leave blank and hit OK
and VIOLA!!!
You are back in business
Its actually in ATT's forum help somwhere
EDIT: heres the link https://cingular.atgnow.com/cng/tutorials/KB71267.html
same problem
the way that windows mobile organizes connections is completely ilogical -- to me anyways
i am baffled..gmail will not work, same error, been going on for months now, ever since i got my device
skype will not work, same error, "cannot connect with current settings"
everything else works..
WTF IS "My ISP" and "The Internet" and "Media Net"
why are there 3 connections for the same exact god damn thing?
Should i just delete everything except for Media net?
Then maybe it will be FORCED to use it..god
I have tried doing these steps from the above post but nothing has changed
==============
update: skype now works, gmail still will not work
update2: Gmail works when wifi is on, still not over 3g
What i would really like to know is why the connections are organized this way, so maybe that will lead me to the root of the problem itself
tramane said:
What i had to do was goto connections >> connections
Advanced tab
Selecy Networks
Click the drop down, Media net should be fine
IE if you goto edit it says wap.cingular
Now hit that drop down and goto my isp
And you have to change the APN to wap.cingular
then on the username/pass screen
username: [email protected]
password: CINGULAR1
domain leave blank and hit OK
and VIOLA!!!
You are back in business
Its actually in ATT's forum help somwhere
EDIT: heres the link https://cingular.atgnow.com/cng/tutorials/KB71267.html
Click to expand...
Click to collapse
TRAMANE, you are the bomb. thanks for the help. Didn't ask the question but you sure helped me out.
thanks again.
Ok ok, I edited this post because at&t doesn't provide the exact details and there is no thread on here that has all the settings for it.
To get to the connection settings:
Start Menu/Settings/Connections/advanced/select networks/click "new" if media net isn't there or click edit if media net is there/ fill in these settings:
MEdia Net:
General: MEdia Net
Modem:Edit(MEdia Net)/New(Create Media Net):
Name: MEdia Net
Modem:Cellular Line (GPRS , 3G)
Hit next
Access Point name: wap.cingular
Hit next
Leave first three fields empty(if you know what to put put in but it doesn't really matter)
Hit advanced
Select Use server assigned IP address
Select Use IP Header compression
Servers:
Select Use server assigned address
HIT OK
Hit finished
Proxy Settings:
Select This network connects to the Internet
Select This network uses a proxy server. . . .
Proxy Server: wireless.cingular.com
Hit advanced
Hit HTTP
Port:80
Hit ok
Hit Socks
Server: localhost
Port: 1080
Hit ok
AT&T ISP:
General:AT&T ISP
Modem:Edit(Edit My ISP*Change name to AT&T ISP GPRS*/New(Create AT&T ISP GPRS):
Name: AT&T GPRS
Modem:Cellular Line (GPRS , 3G)
Hit next
Hit next
Access Point name: isp.cingular
Hit next
Leave first three fields empty(if you know what to put put in but it doesn't really matter)
Hit Finish
Hit ok
Your done with the internet settings
Select MEdia Net then its totally done and to test it out go to
http://device.home/(It wouldn't normally work with out the proxy settings)
Well, I found them.
It's all over Howardforums.com for years if you'd search there.
I searched and nothing. But this is help full for people on here too.
~~Tito~~ said:
I searched and nothing. But this is help full for people on here too.
Click to expand...
Click to collapse
Am sure a few lazy so and so's like...erm me (sometimes) will find this useful. Maybe put some other settings up on this post for other operators. Perhaps worth a look around via search first as its likely to be something that someones already done. But can't be sure.
best
Nick
Why not just use a .cab to do it automatically?
This is the one I've been using:
http://forum.xda-developers.com/attachment.php?attachmentid=67434&d=1201326345
Also, I recently found out I could add MediaNet under My ISP. So now if I have Wifi on, it'll use Wifi. Otherwise it'll use MediaNet.
I had MediaNet seperate so I kept having to change it. Much better this way.
jackburnt said:
Also, I recently found out I could add MediaNet under My ISP. So now if I have Wifi on, it'll use Wifi. Otherwise it'll use MediaNet.
I had MediaNet seperate so I kept having to change it. Much better this way.
Click to expand...
Click to collapse
This is something that I've been trying to figure out for a while. How do you add MediaNet under My ISP. I would love to be able to be on the WIFI while at work and then change to ISP when I leave.
thanks,
P
jackburnt said:
Also, I recently found out I could add MediaNet under My ISP. So now if I have Wifi on, it'll use Wifi. Otherwise it'll use MediaNet.
I had MediaNet seperate so I kept having to change it. Much better this way.
Click to expand...
Click to collapse
I am also very curious about this.
Settings > Connections > Connections
Advanced tab > Select Networks
With My ISP selected, click "Edit." Then click "New..." at bottom and enter in the MEdiaNet stuff.
Thanks alot for the info. I was having trouble accessing Cingular Video after flashing to Duttys rom.
i was very confused about this and erased all of the connections
why is there Media Net and AT&T ISP GPRS?
I know this is supposed to be for *dummies*
so i guess i am one
But what's the reasoning behind needing two of them?
surgex0 said:
i was very confused about this and erased all of the connections
why is there Media Net and AT&T ISP GPRS?
I know this is supposed to be for *dummies*
so i guess i am one
But what's the reasoning behind needing two of them?
Click to expand...
Click to collapse
One is Media Net Access(and the whole internet) and the other one is for tethering.
5 stars!
Thanks, this helped a lot. Now to figure out how to tell my cooked 6.1 ROM that I am on AT&T and not roaming. Seems to be a bug on every 6.1 ROM I have flashed.
WORKS GREAT Thank You!!!
over2land said:
Why not just use a .cab to do it automatically?
This is the one I've been using:
http://forum.xda-developers.com/attachment.php?attachmentid=67434&d=1201326345
Click to expand...
Click to collapse
Great fix!!! This site is the best for Tilt help!!! Thanks to all!!!!!!
is there a way to do this if the phone is unlocked with t-mobile?
T-mobile settings
danwill42 said:
is there a way to do this if the phone is unlocked with t-mobile?
Click to expand...
Click to collapse
Have you tried searching for the settings in this forum?
It is the only way to learn.
Are there any new settings for at&t? I want to update this.
I was hoping someone would figure out how to manually select a tower in AT&T.
~~Tito~~ said:
Are there any new settings for at&t? I want to update this.
Click to expand...
Click to collapse
I am not sure if there is anything new but this didn't work for me. I tried this on my Tilt 2 flashed with Sergio76's The Cell ROM v9.5 AT&T (just has the AT&T dialer and nothing else AT&T). I had used a cab that fixed all of the settings to what's in the post except the AT&T ISP which I took care of no problem. However, when I go to Media Mall and search for an app, I'm told there are no results for my handset. I looked at the device ident in the settings and the IMEI is there but the s/n is wiped and I can't edit it. Maybe with a regedit...I dunno. I haven't had the time to try that. It was an idea. There's something that was wiped off the phone that identified my device to AT&T...maybe some sort of hidden proxy or certificate or simply the s/n. I haven't found any Tilt 2 users so far that are able to or even use the Media Mall so I dunno. If anyone else knows something or has figured this out please clue me in. I wouldn't mind being able to get back to the media mall.
Thanks for any help...
Okay, this might be something someone has a quick simple solutin for or a long tedious solution, either way I need help please
I flashed my phone over to DCD 3.2.6 Base w/Round 4 Reloaded, everything was great until I flashed the carrier cab... there isn't one for MetroPCS so I used what the phone was, Sprint... and now I have no internet =(
Can ANYONE Help?
Bump for help
Here is a Metro carrier cab i made.
Automated Metro PCS WAP and Arcsoft CABs for Windows Mobile CDMA Devices.
Motorola Q's DO NOT support Arcsoft so DO NOT install those CABs, you may only use the Carrier CAB..
I have added a new Version 5.2.32.2R1 and added Metros changes to my old (original) CABs.
1: Please delete/overwrite/rename the IOTA folder in device memory/program files (if exists, usually stock ROMs)
2: Please delete the HTC Guardian shortcut or equivalent from device memory/windows/startup folder (if exists, usually stock ROMs) and reboot your device.
3: Install my Security Policy Lifter CAB (you may or may not need this depending on the ROM you use) and reboot your device.
4: Now choose a CAB to install your options and explanations are below. Obviously reboot your device after installation.
The HTC Titan MMS Fix versions I only found needed on a HTC Titan with a Stock ROM. Most custom ROMs including Mine dont have the Default Connection string issue. MMS always works.. So you can user the "Other" versions if using a Titan with a custom ROM or another WM CDMA device. The Metro Carrier CAB is for people that just want to set up their data Connection on Metro PCS *it is not required for my cabs that have WAP in the name* . You dont have to do anything but install. No deleting any registry settings or connections for all of these CABs! They do all the work for you.
For the CABs with WAP or the Carrier CAB all you have to do after reboot is make sure phone is unplugged and open internet explorer. Navigate to a real page like yahoo.com and a prompt will come up. Enter your [email protected] and password is "metropcs" lowercase and no quotes. Blank domain, click save password. Then OK, or Done.
If you are going to try several of them just make sure to uninstall old CAB before new one. Easy.
Also if you are going to use these for another Carrier just remember that each Arcsoft of mine has the MetroPCS SetMdn fix in the start up folder. It woulnt hurt you but may as well get rid of it if not using Metro PCS.
"HTC Titan" MMS Fix including Metro PCS WAP and Arcsoft 5.0.70.24 <--Sets up Data Connection and Installs Arcsoft for Metro PCS, uses Titan MMS fix to delete default connection string.
"HTC Titan" MMS Fix including Metro PCS WAP and Arcsoft 5.2.32.2R1 <--Sets up Data Connection and Installs Arcsoft for Metro PCS, uses Titan MMS fix to delete default connection string.
"Other" Windows Mobile CDMA devices Metro PCS WAP and Arcsoft 5.0.70.24 <--Sets up Data Connection and Installs Arcsoft for Metro PCS.
"Other" Windows Mobile CDMA devices Metro PCS WAP and Arcsoft 5.2.32.2R1 <--Sets up Data Connection and Installs Arcsoft for Metro PCS.
Make sure that after installing an Arcsoft CAB that you dont fall victim to the WAP type bug this link will explain what happens and what it is and how to fix it.
Ryan Mogul Metro PCS Carrier CAB <--Just sets up your Metro PCS Data Connection
These CABs totally blow away any others created before. I spent a lot of time on these. A little taste of everything for everyone. Here is the other great thing about these CABs and they are the first of its kind. You do not have to edit your registry first! You do not have to delete any existing Data Connections! My CABs take care of all that work.
For example when I tested my new method out I created a few dummy connections using my phone. I also went into the registry HKLMS arcsoft and added a bunch of bogus keys. I then changed my connection to one of the bogus ones. Top and Bottom networks were bogus. Then I installed my Cricket WAP and Arcsoft 5_0_31_7 (non Titan Fix version my ROMs dont need default connection fix to operate properly). The CAB totally deleted all existing connections with the exception of the ones that are supposed to be there. My work network, secure wap, internet, my isp etc.. And it installed the data connection ready to activate using the browser like normal. Then I checked the Arcsoft keys and the bogus ones were gone. Everything was how its supposed to be.
The point is with all of these CABs you dont have to do anything but install to device memory and sit back let it do all the work. Absolutely great!
If it doesnt install soft reset your device and try again. Do not check messages first just reboot and install.
If it still doesnt install try another CAB, your Stock NOOB ROM is probably affecting your ability to install such CABs.
Your the man Ryan!!!!
Ryan.... you may have saved my bacon, player. I'm about to throw your CAB on and see what happens.
stretchito said:
Ryan.... you may have saved my bacon, player. I'm about to throw your CAB on and see what happens.
Click to expand...
Click to collapse
Well, you got me one step closer. I can now send emails via Gmail but still not internet. I check all my setting and I'm fairly sure I've got them set correctly. Any ideas? Whenever I try to hit IE, it dials the #777 connection I set up and it says connecting... then locating.... then... this page can't be opened because the connection has been lost. I updated my PRL (i believe it's 2002). Any ideas?
Thanks again.
udfxrookie said:
Okay, this might be something someone has a quick simple solutin for or a long tedious solution, either way I need help please
I flashed my phone over to DCD 3.2.6 Base w/Round 4 Reloaded, everything was great until I flashed the carrier cab... there isn't one for MetroPCS so I used what the phone was, Sprint... and now I have no internet =(
Can ANYONE Help?
Click to expand...
Click to collapse
Where did you find this ROM? His site is down and I can't find it anywhere?
He just moved his site, R4R Loaded http://www.sskusers.com/Titan.html
I followed those and they all come back broken.
Wow!! I found a copy of R4R.... omfg... it's so sick. I love it. the interface is so dope. I flashed it, hard reset, and ran the metropcs carrier cab... still not net. It must be a setting I'm messing up. I went through and made sure that everything was my number and nothing said sprint on my nam, w.ip. and all that but something tells me that there's something on that profile that should be nulled out. can anybody tell me what should be filled in and what should be empty (or zeroed out) in the settings?
Hey buddy hope this helps you.
Here is what I can suggest for you. The obvious things have to be set up right like PST settings. I would consult with udfxrookie as my CAB got him out of his jam with Metro PCS. Ask him about the PST settings and also you may have to Un-Authenticate and Re-Authenticate as described in my Cricket PST settings thread. Just use the Metro Values instead of the Cricket values. The HDR auth & PPP username and Password part.
This is a PM from udfxrookie
udfxrookie said:
Yeah, carrier cab worked out perfect, back online and MMS settings are up and running, thanks again so much. Your a lifesaver
Click to expand...
Click to collapse
Now after making sure your Metro PCS PST settings are correct. Was the first thing you did when you are done flashing the phone and didnt touch a single thing (settings etc..) did you install MY Metro Carrier CAB and wait a little while then soft reset?
If that was fine then after the soft reset did you make sure your Phone WAS NOT plugged in to the Computer before attempting to access the Internet on the Phone to set up the @metropcs.com and password crap? The Phone needs to be unplugged from PC as when the Phone is plugged in its using your Home PC's internet connection and will not set up right.
After these steps you should be set to jet. Only other thing I can think of is you may NOT have a Data plan with Metro PCS, or may need to have the account refreshed. Let us know how it worked out.
I made a Full Metro PCS Programmer CAB.
Automated Metro PCS WAP and Arcsoft CABs for Windows Mobile CDMA Devices.
Motorola Q's DO NOT support Arcsoft so DO NOT install those CABs, you may only use the Carrier CAB..
I have added a new Version 5.2.32.2R1 and added Metros changes to my old (original) CABs.
1: Please delete/overwrite/rename the IOTA folder in device memory/program files (if exists, usually stock ROMs)
2: Please delete the HTC Guardian shortcut or equivalent from device memory/windows/startup folder (if exists, usually stock ROMs) and reboot your device.
3: Install my Security Policy Lifter CAB (you may or may not need this depending on the ROM you use) and reboot your device.
4: Now choose a CAB to install your options and explanations are below. Obviously reboot your device after installation.
The HTC Titan MMS Fix versions I only found needed on a HTC Titan with a Stock ROM. Most custom ROMs including Mine dont have the Default Connection string issue. MMS always works.. So you can user the "Other" versions if using a Titan with a custom ROM or another WM CDMA device. The Metro Carrier CAB is for people that just want to set up their data Connection on Metro PCS *it is not required for my cabs that have WAP in the name* . You dont have to do anything but install. No deleting any registry settings or connections for all of these CABs! They do all the work for you.
For the CABs with WAP or the Carrier CAB all you have to do after reboot is make sure phone is unplugged and open internet explorer. Navigate to a real page like yahoo.com and a prompt will come up. Enter your [email protected] and password is "metropcs" lowercase and no quotes. Blank domain, click save password. Then OK, or Done.
If you are going to try several of them just make sure to uninstall old CAB before new one. Easy.
Also if you are going to use these for another Carrier just remember that each Arcsoft of mine has the MetroPCS SetMdn fix in the start up folder. It woulnt hurt you but may as well get rid of it if not using Metro PCS.
"HTC Titan" MMS Fix including Metro PCS WAP and Arcsoft 5.0.70.24 <--Sets up Data Connection and Installs Arcsoft for Metro PCS, uses Titan MMS fix to delete default connection string.
"HTC Titan" MMS Fix including Metro PCS WAP and Arcsoft 5.2.32.2R1 <--Sets up Data Connection and Installs Arcsoft for Metro PCS, uses Titan MMS fix to delete default connection string.
"Other" Windows Mobile CDMA devices Metro PCS WAP and Arcsoft 5.0.70.24 <--Sets up Data Connection and Installs Arcsoft for Metro PCS.
"Other" Windows Mobile CDMA devices Metro PCS WAP and Arcsoft 5.2.32.2R1 <--Sets up Data Connection and Installs Arcsoft for Metro PCS.
Make sure that after installing an Arcsoft CAB that you dont fall victim to the WAP type bug this link will explain what happens and what it is and how to fix it.
Ryan Mogul Metro PCS Carrier CAB <--Just sets up your Metro PCS Data Connection
These CABs totally blow away any others created before. I spent a lot of time on these. A little taste of everything for everyone. Here is the other great thing about these CABs and they are the first of its kind. You do not have to edit your registry first! You do not have to delete any existing Data Connections! My CABs take care of all that work.
For example when I tested my new method out I created a few dummy connections using my phone. I also went into the registry HKLMS arcsoft and added a bunch of bogus keys. I then changed my connection to one of the bogus ones. Top and Bottom networks were bogus. Then I installed my Cricket WAP and Arcsoft 5_0_31_7 (non Titan Fix version my ROMs dont need default connection fix to operate properly). The CAB totally deleted all existing connections with the exception of the ones that are supposed to be there. My work network, secure wap, internet, my isp etc.. And it installed the data connection ready to activate using the browser like normal. Then I checked the Arcsoft keys and the bogus ones were gone. Everything was how its supposed to be.
The point is with all of these CABs you dont have to do anything but install to device memory and sit back let it do all the work. Absolutely great!
If it doesnt install soft reset your device and try again. Do not check messages first just reboot and install.
If it still doesnt install try another CAB, your Stock NOOB ROM is probably affecting your ability to install such CABs.
Thanks loads for the help. I'm about to try the CAB again.
Wait.... what do you mean by ?go into IE and enter your name and password"? Where do you enter that at? I entered that into my connection info but not my proxy info.
Also... how do you get to the epst area with your ROM? My dialer code (##778#) isn't working now. Did I mess something up?
stretchito said:
Thanks loads for the help. I'm about to try the CAB again.
Wait.... what do you mean by ?go into IE and enter your name and password"? Where do you enter that at? I entered that into my connection info but not my proxy info.
Also... how do you get to the epst area with your ROM? My dialer code (##778#) isn't working now. Did I mess something up?
Click to expand...
Click to collapse
Make sure your phone is unplugged from Computer for next step. That is open internet explorer on the phone and navigate to a real webpage. yahoo.com etc.. then a prompt will come up telling you what to do, enter your [email protected] , password is metropcs. Make sure to click save password. Then that should be it.
You dont have to enter the proxy or anything... Both of my cabs already do that!! You may have to go into select networks and make the top drop down menu My work network, and Bottom one MetroPCS, you can fiddle around with those until you achieve what you need.
And about going into EPST use the diagnostic shortcut in start bar/programs/diagnostic..
You probably have smart dial on thats why you are having problems. Try ##778 call, ##778# call. If you cant get in with all three suggestions then idk. Reading my threads would of already told you this knowledge as well. I didnt even know you are using MY ROM. Here is what you said a couple posts ago, and R4R is not my ROM
stretchito said:
Wow!! I found a copy of R4R.... omfg... it's so sick. I love it. the interface is so dope. I flashed it, hard reset, and ran the metropcs carrier cab... still not net. It must be a setting I'm messing up. I went through and made sure that everything was my number and nothing said sprint on my nam, w.ip. and all that but something tells me that there's something on that profile that should be nulled out. can anybody tell me what should be filled in and what should be empty (or zeroed out) in the settings?
Click to expand...
Click to collapse
Which version of MY ROM are you using? sprint, verizon, cricket etc... I have a metro pcs ROM. There are links in my ROM threads, there is a heavy version and light. Like the rest of my ROM's
Ryan
just wanted to know if metropcs will know that im using sprint mugol as a phone instead of their phone if i flash my mugol using your rom and carrier cab? I'm thinking of switching over from sprint to metropcs. I want to try their first month free first before I make the switch because I want to know if that will cause any trouble. I like the $45 plan they have. Others who have metropcs if you can give me feedback on this as well that would great too, my sprint is expiring this month on 22nd and ive been itching on switching somewhere else.
Thanks
sprint sucks
I had sprint for several years thru my family's business and was never really impressed with the service. The business closed due to the crappy economy and I ended up having to get a metro. signed up for the unlimited talk/text plan and bought their samsung slider. I like the service and have recently learned that ppc could be flashed over. I now have the sprint mogul fully operational with mms and web and hands down I love it....everyone who sees my phone thinks it is cool as hell. looking to upgrade to touch pro in the near future. If u live in an area that offers metro then go for it. it might b a pain in the ass to get them to put the smartphones esn on their network but just go to one of the smaller stores and offer the worker a few bucks to put the esn in as a razor v3....that what i did.
buttplumber said:
I had sprint for several years thru my family's business and was never really impressed with the service. The business closed due to the crappy economy and I ended up having to get a metro. signed up for the unlimited talk/text plan and bought their samsung slider. I like the service and have recently learned that ppc could be flashed over. I now have the sprint mogul fully operational with mms and web and hands down I love it....everyone who sees my phone thinks it is cool as hell. looking to upgrade to touch pro in the near future. If u live in an area that offers metro then go for it. it might b a pain in the ass to get them to put the smartphones esn on their network but just go to one of the smaller stores and offer the worker a few bucks to put the esn in as a razor v3....that what i did.
Click to expand...
Click to collapse
Yea I agree, if trying to activate a Mogul on almost any CDMA Carrier you might want to lie to them and say your phone is a Motorola V3C, or if that particular Carrier doesnt have a Motorola V3C then find out what phone they carry that has 3G EVDO and tell them you are using that phone. This way their will be no problems obtaining EVDO or in some cases not being able to put the phone on the account.
While I am in here, I have updated the Metro Carrier CAB's because I noticed that a value was set that tells you when a text has been read by the other person. I had thought I didnt include that value but I guess I had a lot to do that day.
The CAB's are updated with Working Dialer Codes, and will get rid of that annoying System Administrator message letting you know your text was received and read. If you do not want to re-download the CAB then navigate to this reg entry and change the Value from 1 to 0.
HKEY_LOCAL_MACHINE\Software\OEM\SMS
"Delivery Ack" Change value from 1 to 0
Also for those with a Mogul, I have a fully tested WAP/MMS Metro ROM that I cooked (in my ROM threads), you do NOT need a carrier cab or any edits. The ROM is fully programmed for WAP/MMS all you have to do is activate the internet first while phone is unplugged.. Like you have to on any Custom Carrier Cooked ROM..
buttplumber said:
I had sprint for several years thru my family's business and was never really impressed with the service. The business closed due to the crappy economy and I ended up having to get a metro. signed up for the unlimited talk/text plan and bought their samsung slider. I like the service and have recently learned that ppc could be flashed over. I now have the sprint mogul fully operational with mms and web and hands down I love it....everyone who sees my phone thinks it is cool as hell. looking to upgrade to touch pro in the near future. If u live in an area that offers metro then go for it. it might b a pain in the ass to get them to put the smartphones esn on their network but just go to one of the smaller stores and offer the worker a few bucks to put the esn in as a razor v3....that what i did.
Click to expand...
Click to collapse
so you mean they really can't detect what kind of phone it is through ESN? That's what I was worried about because when I log in to sprint it has a picture of what kind of phone I'm currently using so they know. That is interesting and at the same time exciting. Ohh can't wait for my contract to end. I saw a couple of small stores in my area about 4 or 5 think.
Do they allow swapping the phone during the free month so atleast I can be really sure it'll work with my mugol? I called their CS # line and the CS sounds really dull as if she doesn't care and keeps telling me she can't do nothing at all.
RyanMogul6800 said:
Yea I agree, if trying to activate a Mogul on almost any CDMA Carrier you might want to lie to them and say your phone is a Motorola V3C, or if that particular Carrier doesnt have a Motorola V3C then find out what phone they carry that has 3G EVDO and tell them you are using that phone. This way their will be no problems obtaining EVDO or in some cases not being able to put the phone on the account.
While I am in here, I have updated the Metro Carrier CAB's because I noticed that a value was set that tells you when a text has been read by the other person. I had thought I didnt include that value but I guess I had a lot to do that day.
The CAB's are updated with Working Dialer Codes, and will get rid of that annoying System Administrator message letting you know your text was received and read. If you do not want to re-download the CAB then navigate to this reg entry and change the Value from 1 to 0.
HKEY_LOCAL_MACHINE\Software\OEM\SMS
"Delivery Ack" Change value from 1 to 0
Also for those with a Mogul, I have a fully tested WAP/MMS Metro ROM that I cooked (in my ROM threads), you do NOT need a carrier cab or any edits. The ROM is fully programmed for WAP/MMS all you have to do is activate the internet first while phone is unplugged.. Like you have to on any Custom Carrier Cooked ROM..
Click to expand...
Click to collapse
that is awesooooommmm a fully set metro rom. this just made it easier and easier for me to switch and save tons of money.
Fixed both metro cabs
I found problems with both of my Metro cabs and they are now fixed. Just make sure to delete any existing connections before installing a cab.
The problem was it not provisioning right and the web prompt never coming up asking you for your information. I got that sorted out so those that tried this and it failed. Try it again.
Cheers
Ok so I have andriod running and making phone calls and receaving them but I cant get it to connect to the internet I have set the apn to #777 and wap.mycricket.com and my #@mycricket.com and password but it still wont connect does any body have an idea what the setting are thanks Dennis
can anyone please help me with this
Cricket/Android...
What Android build and could you help guide me as to how you got it running? I recently moved to Cricket, hacked my WM NFSFAN rom and have everything working but I really want Android. If you have me get up and running I will help get the internet functionality going.
Cricket/Android...
gtpdjw said:
can anyone please help me with this
Click to expand...
Click to collapse
I found some info by the way that might help...
TO GET INTERNET WORKING,
EDIT APN -
PROXY - wap.mycricket.com
PORT - 8080
username - [email protected]
password - cricket
then press menu button and save
**give it a while to locate the info and boot up and then once you see the [E] in the status bar you good to go
The port number is important so make sure yours is set.
I tried those setting already didnt work for me but maybe Ill try again Im think that it wont run on a simple IP address that it needs a broadband IP to get the internet working. But anyway here is a link for the download for Linux/Android http://www.myhtcphone.com/vogue-cab-installer
I think you're using an android port that's over a year old.
Try this: http://sourceforge.net/apps/trac/androidhtc/wiki/WikiStart
I'm curious if the Cricket data proxy is working on the newer versions -- I was trying to help someone to get data running through Cricket's proxy on a CDMA Touch Pro, but we were unsuccessful. If those instructions work for Vogue, it'll give me more hope.
I too have fallen into this problem if anybody has found a solution please post here so we can get this issue cured.
The problem on Cricket service is that the vogue builds will only work with a mobile ip connection if you use a broadband number in epst for the security tab and switch simple ip to mobile ip it will work but that's the only way
ztahoez said:
The problem on Cricket service is that the vogue builds will only work with a mobile ip connection if you use a broadband number in epst for the security tab and switch simple ip to mobile ip it will work but that's the only way
Click to expand...
Click to collapse
That sucks! So having the HTML data plan doesn't make any difference?
Hey guys. I just got my new HTC hd2 In the mail. And Im very happy with it. But, Whenever I try to connect to 3G or Edge. Windows says it cannot connect for an unknown Reason.
I have a T-Mobile HTC HD2. And its unlocked. Im using it with Rogers.
Also. I can Send Texts, Go on Wifi, And make Calls Still. Just no internet.
Any help is wanted, THANKS.
download data controller install it and make sure that your connections are all on.
i dont think the T-MOBILE HD2 will work with Rogers 3G.
Pretttty sure you can only get EDGE speeds on it, cause the T-MOBILE HD2 doesnt have the 3G 850Mhz band for it
okay i downloaded that file now what?
Supp Dude1 said:
okay i downloaded that file now what?
Click to expand...
Click to collapse
run the program make sure all sliders are set to on except the data(off only switch). then close the program go to settings ->wireless controls and hit the on switch for data ->now try internet
Ok man. Im really not understanding this. Do I download that File on my Phone? Or my Computer? Because I did it on my PC and opened that Setup menu and I have no idea what to do from there..
copy the .cab file to your phone. then use the phone's file explorer to navigate to the file and run it. after the setup is finished you will find it's icon in the start menu.
all .cabs run directly from the phone you can download it directly to it or copy it via usb to your sd card. Most .exe files you run from your computer (with a few exceptions) with an active sync connection established through comp<->usb<->phone
jfmckenna said:
all .cabs run directly from the phone you can download it directly to it or copy it via usb to your sd card. Most .exe files you run from your computer (with a few exceptions) with an active sync connection established through comp<->usb<->phone
Click to expand...
Click to collapse
Alright. I Installed that Program. Ran it. And Check off Evey thing Except. Active Data Connect. Because it wont let me turn it to on. Then I go to Setting. Wireless Controls and try to turn on Data. But when I press it. THe windows Loading lights appear and it goes straight to off again.
jfmckenna said:
download data controller install it and make sure that your connections are all on.
Click to expand...
Click to collapse
Supp Dude1 said:
Alright. I Installed that Program. Ran it. And Check off Evey thing Except. Active Data Connect. Because it wont let me turn it to on. Then I go to Setting. Wireless Controls and try to turn on Data. But when I press it. THe windows Loading lights appear and it goes straight to off again.
Click to expand...
Click to collapse
On not off
It wont let me turn the data on...
Supp Dude1 said:
It wont let me turn the data on...
Click to expand...
Click to collapse
What Provider do you have what location do you live in?
Rogers. And Im in British Columbia Canada,
take a look at this
hey check this thread out
DATA Frequency for 3G (HSPA) used in USA can be confusing, and not usable in Canada.
T-Mobile uses 1700MHz (AWS) / 2100MHz for HSPA
ROGERS (Canada) uses 850MHz / 1900MHz
The HD2 might not be able to use HSPA, but should be able to use EDGE for data instead.
You will need to manually set the APN for DATA usage.
APN should be set to:
internet.com
Username and Password should not be required, but just in case.
Usename: wapuser1
Password: wap
Hey maybe even this this guy had the same problem you did basically you need to go to settings->menu->all setings->connections->connections->tasks and then manually edit the settings to these
steve1048 said:
Hello all I'm new to the HTC world so bear with me, I just bought an HTC HD2 which is setup with Rogers, and I can't for the life of me figure out how to get the internet working on it. I talked with support, and they gave me this information to get the internet working.
WAP
For WAP browsing on phones and other WAP devices:
1. APN: goam.com
2. URL or HomeDeck: mymobilehomepage.rogers .com
3. Username: wapuser1
4. Password: wap
5. Wap IP 1: 208.200.067.150
6. Wap Port 1: 9203
7. Wap IP 2: 208.200.067.151
8. Wap Port 2: 9201
GPRS
For HTML browsing (Private IP address ):
1. APN: internet.com
2. Username: wapuser1
3. Password: wap
MMS
Generic phone:
MMS Settings:
APN: media.com
Username: media
Password: mda01
Gateway IP: 172.25.0.107
Message Server: mms.gprs.rogers .com
Can anyone tell me where I input this information?
Thanks
Click to expand...
Click to collapse
Thanks man! Worked perfectly!!
Oh, just well im here. I have a small question.
When I revive a text. I go to the text app and press on it. It brings up my Convo. But the conversation i sent in order..Which is really bugging me. How can I fix this? Also. When I start to type back to the person. It will finally bring me to the highlighted new text. When I have to go all the way to the bottom to text again.
Finally, this is great news! yeah check this thread out for the message order
It is! Okay I installed that .cab file it says to do. But I didnt know where to put it. So I put the .Cab file in the My Document folder. And Installed it. But I cant find the program!