Okay, this might be something someone has a quick simple solutin for or a long tedious solution, either way I need help please
I flashed my phone over to DCD 3.2.6 Base w/Round 4 Reloaded, everything was great until I flashed the carrier cab... there isn't one for MetroPCS so I used what the phone was, Sprint... and now I have no internet =(
Can ANYONE Help?
Bump for help
Here is a Metro carrier cab i made.
Automated Metro PCS WAP and Arcsoft CABs for Windows Mobile CDMA Devices.
Motorola Q's DO NOT support Arcsoft so DO NOT install those CABs, you may only use the Carrier CAB..
I have added a new Version 5.2.32.2R1 and added Metros changes to my old (original) CABs.
1: Please delete/overwrite/rename the IOTA folder in device memory/program files (if exists, usually stock ROMs)
2: Please delete the HTC Guardian shortcut or equivalent from device memory/windows/startup folder (if exists, usually stock ROMs) and reboot your device.
3: Install my Security Policy Lifter CAB (you may or may not need this depending on the ROM you use) and reboot your device.
4: Now choose a CAB to install your options and explanations are below. Obviously reboot your device after installation.
The HTC Titan MMS Fix versions I only found needed on a HTC Titan with a Stock ROM. Most custom ROMs including Mine dont have the Default Connection string issue. MMS always works.. So you can user the "Other" versions if using a Titan with a custom ROM or another WM CDMA device. The Metro Carrier CAB is for people that just want to set up their data Connection on Metro PCS *it is not required for my cabs that have WAP in the name* . You dont have to do anything but install. No deleting any registry settings or connections for all of these CABs! They do all the work for you.
For the CABs with WAP or the Carrier CAB all you have to do after reboot is make sure phone is unplugged and open internet explorer. Navigate to a real page like yahoo.com and a prompt will come up. Enter your [email protected] and password is "metropcs" lowercase and no quotes. Blank domain, click save password. Then OK, or Done.
If you are going to try several of them just make sure to uninstall old CAB before new one. Easy.
Also if you are going to use these for another Carrier just remember that each Arcsoft of mine has the MetroPCS SetMdn fix in the start up folder. It woulnt hurt you but may as well get rid of it if not using Metro PCS.
"HTC Titan" MMS Fix including Metro PCS WAP and Arcsoft 5.0.70.24 <--Sets up Data Connection and Installs Arcsoft for Metro PCS, uses Titan MMS fix to delete default connection string.
"HTC Titan" MMS Fix including Metro PCS WAP and Arcsoft 5.2.32.2R1 <--Sets up Data Connection and Installs Arcsoft for Metro PCS, uses Titan MMS fix to delete default connection string.
"Other" Windows Mobile CDMA devices Metro PCS WAP and Arcsoft 5.0.70.24 <--Sets up Data Connection and Installs Arcsoft for Metro PCS.
"Other" Windows Mobile CDMA devices Metro PCS WAP and Arcsoft 5.2.32.2R1 <--Sets up Data Connection and Installs Arcsoft for Metro PCS.
Make sure that after installing an Arcsoft CAB that you dont fall victim to the WAP type bug this link will explain what happens and what it is and how to fix it.
Ryan Mogul Metro PCS Carrier CAB <--Just sets up your Metro PCS Data Connection
These CABs totally blow away any others created before. I spent a lot of time on these. A little taste of everything for everyone. Here is the other great thing about these CABs and they are the first of its kind. You do not have to edit your registry first! You do not have to delete any existing Data Connections! My CABs take care of all that work.
For example when I tested my new method out I created a few dummy connections using my phone. I also went into the registry HKLMS arcsoft and added a bunch of bogus keys. I then changed my connection to one of the bogus ones. Top and Bottom networks were bogus. Then I installed my Cricket WAP and Arcsoft 5_0_31_7 (non Titan Fix version my ROMs dont need default connection fix to operate properly). The CAB totally deleted all existing connections with the exception of the ones that are supposed to be there. My work network, secure wap, internet, my isp etc.. And it installed the data connection ready to activate using the browser like normal. Then I checked the Arcsoft keys and the bogus ones were gone. Everything was how its supposed to be.
The point is with all of these CABs you dont have to do anything but install to device memory and sit back let it do all the work. Absolutely great!
If it doesnt install soft reset your device and try again. Do not check messages first just reboot and install.
If it still doesnt install try another CAB, your Stock NOOB ROM is probably affecting your ability to install such CABs.
Your the man Ryan!!!!
Ryan.... you may have saved my bacon, player. I'm about to throw your CAB on and see what happens.
stretchito said:
Ryan.... you may have saved my bacon, player. I'm about to throw your CAB on and see what happens.
Click to expand...
Click to collapse
Well, you got me one step closer. I can now send emails via Gmail but still not internet. I check all my setting and I'm fairly sure I've got them set correctly. Any ideas? Whenever I try to hit IE, it dials the #777 connection I set up and it says connecting... then locating.... then... this page can't be opened because the connection has been lost. I updated my PRL (i believe it's 2002). Any ideas?
Thanks again.
udfxrookie said:
Okay, this might be something someone has a quick simple solutin for or a long tedious solution, either way I need help please
I flashed my phone over to DCD 3.2.6 Base w/Round 4 Reloaded, everything was great until I flashed the carrier cab... there isn't one for MetroPCS so I used what the phone was, Sprint... and now I have no internet =(
Can ANYONE Help?
Click to expand...
Click to collapse
Where did you find this ROM? His site is down and I can't find it anywhere?
He just moved his site, R4R Loaded http://www.sskusers.com/Titan.html
I followed those and they all come back broken.
Wow!! I found a copy of R4R.... omfg... it's so sick. I love it. the interface is so dope. I flashed it, hard reset, and ran the metropcs carrier cab... still not net. It must be a setting I'm messing up. I went through and made sure that everything was my number and nothing said sprint on my nam, w.ip. and all that but something tells me that there's something on that profile that should be nulled out. can anybody tell me what should be filled in and what should be empty (or zeroed out) in the settings?
Hey buddy hope this helps you.
Here is what I can suggest for you. The obvious things have to be set up right like PST settings. I would consult with udfxrookie as my CAB got him out of his jam with Metro PCS. Ask him about the PST settings and also you may have to Un-Authenticate and Re-Authenticate as described in my Cricket PST settings thread. Just use the Metro Values instead of the Cricket values. The HDR auth & PPP username and Password part.
This is a PM from udfxrookie
udfxrookie said:
Yeah, carrier cab worked out perfect, back online and MMS settings are up and running, thanks again so much. Your a lifesaver
Click to expand...
Click to collapse
Now after making sure your Metro PCS PST settings are correct. Was the first thing you did when you are done flashing the phone and didnt touch a single thing (settings etc..) did you install MY Metro Carrier CAB and wait a little while then soft reset?
If that was fine then after the soft reset did you make sure your Phone WAS NOT plugged in to the Computer before attempting to access the Internet on the Phone to set up the @metropcs.com and password crap? The Phone needs to be unplugged from PC as when the Phone is plugged in its using your Home PC's internet connection and will not set up right.
After these steps you should be set to jet. Only other thing I can think of is you may NOT have a Data plan with Metro PCS, or may need to have the account refreshed. Let us know how it worked out.
I made a Full Metro PCS Programmer CAB.
Automated Metro PCS WAP and Arcsoft CABs for Windows Mobile CDMA Devices.
Motorola Q's DO NOT support Arcsoft so DO NOT install those CABs, you may only use the Carrier CAB..
I have added a new Version 5.2.32.2R1 and added Metros changes to my old (original) CABs.
1: Please delete/overwrite/rename the IOTA folder in device memory/program files (if exists, usually stock ROMs)
2: Please delete the HTC Guardian shortcut or equivalent from device memory/windows/startup folder (if exists, usually stock ROMs) and reboot your device.
3: Install my Security Policy Lifter CAB (you may or may not need this depending on the ROM you use) and reboot your device.
4: Now choose a CAB to install your options and explanations are below. Obviously reboot your device after installation.
The HTC Titan MMS Fix versions I only found needed on a HTC Titan with a Stock ROM. Most custom ROMs including Mine dont have the Default Connection string issue. MMS always works.. So you can user the "Other" versions if using a Titan with a custom ROM or another WM CDMA device. The Metro Carrier CAB is for people that just want to set up their data Connection on Metro PCS *it is not required for my cabs that have WAP in the name* . You dont have to do anything but install. No deleting any registry settings or connections for all of these CABs! They do all the work for you.
For the CABs with WAP or the Carrier CAB all you have to do after reboot is make sure phone is unplugged and open internet explorer. Navigate to a real page like yahoo.com and a prompt will come up. Enter your [email protected] and password is "metropcs" lowercase and no quotes. Blank domain, click save password. Then OK, or Done.
If you are going to try several of them just make sure to uninstall old CAB before new one. Easy.
Also if you are going to use these for another Carrier just remember that each Arcsoft of mine has the MetroPCS SetMdn fix in the start up folder. It woulnt hurt you but may as well get rid of it if not using Metro PCS.
"HTC Titan" MMS Fix including Metro PCS WAP and Arcsoft 5.0.70.24 <--Sets up Data Connection and Installs Arcsoft for Metro PCS, uses Titan MMS fix to delete default connection string.
"HTC Titan" MMS Fix including Metro PCS WAP and Arcsoft 5.2.32.2R1 <--Sets up Data Connection and Installs Arcsoft for Metro PCS, uses Titan MMS fix to delete default connection string.
"Other" Windows Mobile CDMA devices Metro PCS WAP and Arcsoft 5.0.70.24 <--Sets up Data Connection and Installs Arcsoft for Metro PCS.
"Other" Windows Mobile CDMA devices Metro PCS WAP and Arcsoft 5.2.32.2R1 <--Sets up Data Connection and Installs Arcsoft for Metro PCS.
Make sure that after installing an Arcsoft CAB that you dont fall victim to the WAP type bug this link will explain what happens and what it is and how to fix it.
Ryan Mogul Metro PCS Carrier CAB <--Just sets up your Metro PCS Data Connection
These CABs totally blow away any others created before. I spent a lot of time on these. A little taste of everything for everyone. Here is the other great thing about these CABs and they are the first of its kind. You do not have to edit your registry first! You do not have to delete any existing Data Connections! My CABs take care of all that work.
For example when I tested my new method out I created a few dummy connections using my phone. I also went into the registry HKLMS arcsoft and added a bunch of bogus keys. I then changed my connection to one of the bogus ones. Top and Bottom networks were bogus. Then I installed my Cricket WAP and Arcsoft 5_0_31_7 (non Titan Fix version my ROMs dont need default connection fix to operate properly). The CAB totally deleted all existing connections with the exception of the ones that are supposed to be there. My work network, secure wap, internet, my isp etc.. And it installed the data connection ready to activate using the browser like normal. Then I checked the Arcsoft keys and the bogus ones were gone. Everything was how its supposed to be.
The point is with all of these CABs you dont have to do anything but install to device memory and sit back let it do all the work. Absolutely great!
If it doesnt install soft reset your device and try again. Do not check messages first just reboot and install.
If it still doesnt install try another CAB, your Stock NOOB ROM is probably affecting your ability to install such CABs.
Thanks loads for the help. I'm about to try the CAB again.
Wait.... what do you mean by ?go into IE and enter your name and password"? Where do you enter that at? I entered that into my connection info but not my proxy info.
Also... how do you get to the epst area with your ROM? My dialer code (##778#) isn't working now. Did I mess something up?
stretchito said:
Thanks loads for the help. I'm about to try the CAB again.
Wait.... what do you mean by ?go into IE and enter your name and password"? Where do you enter that at? I entered that into my connection info but not my proxy info.
Also... how do you get to the epst area with your ROM? My dialer code (##778#) isn't working now. Did I mess something up?
Click to expand...
Click to collapse
Make sure your phone is unplugged from Computer for next step. That is open internet explorer on the phone and navigate to a real webpage. yahoo.com etc.. then a prompt will come up telling you what to do, enter your [email protected] , password is metropcs. Make sure to click save password. Then that should be it.
You dont have to enter the proxy or anything... Both of my cabs already do that!! You may have to go into select networks and make the top drop down menu My work network, and Bottom one MetroPCS, you can fiddle around with those until you achieve what you need.
And about going into EPST use the diagnostic shortcut in start bar/programs/diagnostic..
You probably have smart dial on thats why you are having problems. Try ##778 call, ##778# call. If you cant get in with all three suggestions then idk. Reading my threads would of already told you this knowledge as well. I didnt even know you are using MY ROM. Here is what you said a couple posts ago, and R4R is not my ROM
stretchito said:
Wow!! I found a copy of R4R.... omfg... it's so sick. I love it. the interface is so dope. I flashed it, hard reset, and ran the metropcs carrier cab... still not net. It must be a setting I'm messing up. I went through and made sure that everything was my number and nothing said sprint on my nam, w.ip. and all that but something tells me that there's something on that profile that should be nulled out. can anybody tell me what should be filled in and what should be empty (or zeroed out) in the settings?
Click to expand...
Click to collapse
Which version of MY ROM are you using? sprint, verizon, cricket etc... I have a metro pcs ROM. There are links in my ROM threads, there is a heavy version and light. Like the rest of my ROM's
Ryan
just wanted to know if metropcs will know that im using sprint mugol as a phone instead of their phone if i flash my mugol using your rom and carrier cab? I'm thinking of switching over from sprint to metropcs. I want to try their first month free first before I make the switch because I want to know if that will cause any trouble. I like the $45 plan they have. Others who have metropcs if you can give me feedback on this as well that would great too, my sprint is expiring this month on 22nd and ive been itching on switching somewhere else.
Thanks
sprint sucks
I had sprint for several years thru my family's business and was never really impressed with the service. The business closed due to the crappy economy and I ended up having to get a metro. signed up for the unlimited talk/text plan and bought their samsung slider. I like the service and have recently learned that ppc could be flashed over. I now have the sprint mogul fully operational with mms and web and hands down I love it....everyone who sees my phone thinks it is cool as hell. looking to upgrade to touch pro in the near future. If u live in an area that offers metro then go for it. it might b a pain in the ass to get them to put the smartphones esn on their network but just go to one of the smaller stores and offer the worker a few bucks to put the esn in as a razor v3....that what i did.
buttplumber said:
I had sprint for several years thru my family's business and was never really impressed with the service. The business closed due to the crappy economy and I ended up having to get a metro. signed up for the unlimited talk/text plan and bought their samsung slider. I like the service and have recently learned that ppc could be flashed over. I now have the sprint mogul fully operational with mms and web and hands down I love it....everyone who sees my phone thinks it is cool as hell. looking to upgrade to touch pro in the near future. If u live in an area that offers metro then go for it. it might b a pain in the ass to get them to put the smartphones esn on their network but just go to one of the smaller stores and offer the worker a few bucks to put the esn in as a razor v3....that what i did.
Click to expand...
Click to collapse
Yea I agree, if trying to activate a Mogul on almost any CDMA Carrier you might want to lie to them and say your phone is a Motorola V3C, or if that particular Carrier doesnt have a Motorola V3C then find out what phone they carry that has 3G EVDO and tell them you are using that phone. This way their will be no problems obtaining EVDO or in some cases not being able to put the phone on the account.
While I am in here, I have updated the Metro Carrier CAB's because I noticed that a value was set that tells you when a text has been read by the other person. I had thought I didnt include that value but I guess I had a lot to do that day.
The CAB's are updated with Working Dialer Codes, and will get rid of that annoying System Administrator message letting you know your text was received and read. If you do not want to re-download the CAB then navigate to this reg entry and change the Value from 1 to 0.
HKEY_LOCAL_MACHINE\Software\OEM\SMS
"Delivery Ack" Change value from 1 to 0
Also for those with a Mogul, I have a fully tested WAP/MMS Metro ROM that I cooked (in my ROM threads), you do NOT need a carrier cab or any edits. The ROM is fully programmed for WAP/MMS all you have to do is activate the internet first while phone is unplugged.. Like you have to on any Custom Carrier Cooked ROM..
buttplumber said:
I had sprint for several years thru my family's business and was never really impressed with the service. The business closed due to the crappy economy and I ended up having to get a metro. signed up for the unlimited talk/text plan and bought their samsung slider. I like the service and have recently learned that ppc could be flashed over. I now have the sprint mogul fully operational with mms and web and hands down I love it....everyone who sees my phone thinks it is cool as hell. looking to upgrade to touch pro in the near future. If u live in an area that offers metro then go for it. it might b a pain in the ass to get them to put the smartphones esn on their network but just go to one of the smaller stores and offer the worker a few bucks to put the esn in as a razor v3....that what i did.
Click to expand...
Click to collapse
so you mean they really can't detect what kind of phone it is through ESN? That's what I was worried about because when I log in to sprint it has a picture of what kind of phone I'm currently using so they know. That is interesting and at the same time exciting. Ohh can't wait for my contract to end. I saw a couple of small stores in my area about 4 or 5 think.
Do they allow swapping the phone during the free month so atleast I can be really sure it'll work with my mugol? I called their CS # line and the CS sounds really dull as if she doesn't care and keeps telling me she can't do nothing at all.
RyanMogul6800 said:
Yea I agree, if trying to activate a Mogul on almost any CDMA Carrier you might want to lie to them and say your phone is a Motorola V3C, or if that particular Carrier doesnt have a Motorola V3C then find out what phone they carry that has 3G EVDO and tell them you are using that phone. This way their will be no problems obtaining EVDO or in some cases not being able to put the phone on the account.
While I am in here, I have updated the Metro Carrier CAB's because I noticed that a value was set that tells you when a text has been read by the other person. I had thought I didnt include that value but I guess I had a lot to do that day.
The CAB's are updated with Working Dialer Codes, and will get rid of that annoying System Administrator message letting you know your text was received and read. If you do not want to re-download the CAB then navigate to this reg entry and change the Value from 1 to 0.
HKEY_LOCAL_MACHINE\Software\OEM\SMS
"Delivery Ack" Change value from 1 to 0
Also for those with a Mogul, I have a fully tested WAP/MMS Metro ROM that I cooked (in my ROM threads), you do NOT need a carrier cab or any edits. The ROM is fully programmed for WAP/MMS all you have to do is activate the internet first while phone is unplugged.. Like you have to on any Custom Carrier Cooked ROM..
Click to expand...
Click to collapse
that is awesooooommmm a fully set metro rom. this just made it easier and easier for me to switch and save tons of money.
Fixed both metro cabs
I found problems with both of my Metro cabs and they are now fixed. Just make sure to delete any existing connections before installing a cab.
The problem was it not provisioning right and the web prompt never coming up asking you for your information. I got that sorted out so those that tried this and it failed. Try it again.
Cheers
Related
I have Qtek 9100, and I recently upgraded my rom to 2.26.10.2 WWE. after the upgrade, I don't have any MMS capability. When I go to Messaging, then menu, there is no 'MMS Configuration' tab. No MMS anything even on my folder drop down list. I tried the Cingular MMS Cab that was posted. and that didn't work. GPRS and the internet connect just fine.
Any Idea?
check this thread:
http://forum.xda-developers.com/viewtopic.php?t=61619
check this thread:
http://forum.xda-developers.com/viewtopic.php?t=61619
I did
I did actually go to that forum first. I install the Cingular MMS Cab, and it didn't work. I still couldn't find the 'MMS Configuration' anything. I don't really know how to do the extended ROM stuff. I know how to set up the MMS configuration for cingular once I can get to it. But I can't even get to the setting.
:?:
Had a simular experience.
Recent hard reset and no Extended ROM anything. Didn't start up at all.
Now this is good and bad.
I have the GPRS settings done but am struggling with MMS
I believe i have the base settings correct but i am unable to set up an MMS account in the place where email, TXT and hotmail goes.
As you can see i am on Vodafone UK with a monthly contract
any help appreciated
I just had the same issue last night. Hard reset, and non of the customisations loaded.
So i loaded a new rom to it instead
I had the same problem when i first got my phone. It was because of my data plan. I believe the customization takes place by downloading. I didnt have the Cingular PDA Data plan. Im tryin to beat the system with just media max data plan. its cheaper and few texts are included! you may have to add the PDA data plan in order to get the custom installations.
Make sure you look under Menu -> Tools -> Options. MMS will show up in there, if you're using the CAB I posted. I'm still trying to figure out how to make it show up in the menu itself versus having to go through the above shenanigans. Maybe I'll revisit that today when I should be working instead.
well, I still have the same plan as before I upgraded my ROM. and it worked great. No data plan, just the media bundle (or whatever they call it hese days). After I upgraded the ROM, there's no MMS even when I go to menu->tool ->option ->new account , it just do the email setting again. This happened also the first time I got the phone, and someone from cingular send me the setting on air (smart message or something) and it opens the "mms configuration" tab under the menu list. Then it worked just fine until I upgraded the damn ROM. Do you think is a problem during ROM upgrade process? Will redoing the ROM upgrade help? I rather not do this again.
Thanks everybody!
Which CAB did you install from that thread? The one in Dr P's post, or the one in my post?
i installed yours. and actually, since I've been up all night trying to tinker with this, I actually found a fix posted by Molski. And It works now. It doesn't have the direct 'mms configuration" tab to get to the setting, but at least now MMS is in the folder list and I could set up things from there. It seems to be working fine now.
Thanks for all the reply and helps, and shout out to Molski too.
This is the thread that I was looking at just incase someone is having the same problem
http://forum.xda-developers.com/viewtopic.php?t=59513&postdays=0&postorder=asc&start=25
I still don't know why or what the problem was though. Will I have to go through the same thing again when I decide to upgrade the ROM in the future?
You shouldn't have to. And that CAB file I posted should have done basically the same thing. I can't figure out why it didn't. I know I use a slightly different one when I bulldoze my 8125, but if I remember it's because I included some personal settings in there. I can't remember now.. But I may go dig it up, and if it isn't, post it here as well..
Okay, I just looked at the CAB files, and I see what I did.
Basically, the one I posted there just has the settings to fix the resizing issue. It doesn't actually create the MMS folder.
I have another CAB that I use that does create the MMS folder, and then I do my actual settings in a CAB file I use with a bunch of different settings.
I think I'll merge the two CAB files together and post 'em.
what resizing issue was there? since I have installed yours before the other CAB, should I reinstall yours again?
Probably wouldn't have to, unless it adjusts the camera settings.
Basically, if you blitz your device, and don't install any of the Cingular customizations, you don't get MMS. THere's a CAB in the Extended ROM that if you do install it, you get MMS, but there is a sizing issue with images. For example, I may have sent myself an image sized at 90k taken with my phone to myself, but when I receive it, it's a thumbnail sized image at about 3k. With the settings adjustments in the cab file I made, it would be the full sized 90k image.
to avoid all this I sugguest u call cingular and get a data plan.. hard reset or update ur rom or whatever u wanna do. and see if the mms appears then. after that call them back and cancle that data plan... it worked for me
I have already fixed the problem using the fix posted earlier. I am still using the same plan as before, and it's working fine. I thought the data plan is for GPRS connection using a laptop, for example. Anyhow, I just use the media package from cingular and I have been able to access the internet using my phone.
Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
EDIT: Uploaded wrong CAB. New one is good.
EDIT: Added CAB with Both WAP and MMS.
EDIT: Fixed w/MMS CAB to add the Cingular Settings as the default.
EDIT: Replaced with Fixed CAB for Exchange AS and the user/pass stick now. Also added OPEN DNS servers for quicker "locating"
EDIT: Added No ICON Change CAB as requested.
wpbear said:
Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
Click to expand...
Click to collapse
Wow, thanks wpbear, that will come in handy when I finally do decide to upgrade to WM6
Does this include the MMS settings?
Installation of Cingular WAP Settings.cab was unsuccessful
rkorzuch said:
Does this include the MMS settings?
Click to expand...
Click to collapse
No maybe I will look into adding that.
slimsaturn said:
Installation of Cingular WAP Settings.cab was unsuccessful
Click to expand...
Click to collapse
Do you already have the Cingular settigns there and ran this over it, maybe the Reg Keys cant be written if you already have a Cingular setup or if you are just online at the time. I tested it by deleting my connetions and, since My ISP cant be deleted totally, I blanked all the info from it. Then ran the CAB and SR then I had my settings correct.
Also it is tested on Hermes only and the reg keys came from WM6. I can not test on WM5 right now.
I only set up the wap settings. I deleted that first then tried to run it.
slimsaturn said:
I only set up the wap settings. I deleted that first then tried to run it.
Click to expand...
Click to collapse
I had just did a cleared storage so my phone was plain no settings ad I was unsuccessful also.n
I just re-uploaded a newer one, maybe I uploaded the wrong one or it was a bad transfer on my end. The new one is in the first post.
Check 1st post again for MMS.
That should do it the old one was 4kb
Cool. I am one of the quilty ones that did not know how to set it up so I definately appreciate it. I ended up figuring this out around 2am this morning.
But the downloads still seem a little slow. Im using 1.27 radio and XDA 0.20.1.
I noticed the MMS CAB didn't put the Cingular Setting as the "Default" in the new LVSW version so I fixed the second CAB.
Also I noticed that sometimes all the connection/modem settings are correct except the User name and Password sometimes do not stick. All the other info stays.
If it doesn't stick after the soft reset:
User Name: [email protected]
Pass: CINGULAR1
THESE ARE CASE SENSITIVE! Even adding this little bit is better than creating the entire connection every HR. I am looking at the CAB to see if I can make it better. Probably have to write an XML file to do, I hate those so...
Cannot install either
slimsaturn said:
Installation of Cingular WAP Settings.cab was unsuccessful
Click to expand...
Click to collapse
This is exactly what I need but I'm getting the same error. Tried running the Cab from main memory and from my storage card. Using LVSW on a TYTN - no settings currently exist so there's nothing to overwrite. Please help.
Edited: installing directly from this thread (rather then downloading and moving to my device seems to work)
jvence said:
This is exactly what I need but I'm getting the same error. Tried running the Cab from main memory and from my storage card. Using LVSW on a TYTN - no settings currently exist so there's nothing to overwrite. Please help.
Edited: installing directly from this thread (rather then downloading and moving to my device seems to work)
Click to expand...
Click to collapse
I think these problems are from bad downloads. The ftp has caused this on other downloads for me latelty. A redownload fixed it on other cab I have tried. I had the problem on 8525software.com before too.
COnfused
wpbear said:
Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
EDIT: Uploaded wrong CAB. New one is good.
EDIT: Added CAB with Both WAP and MMS.
EDIT: Fixed w/MMS CAB to add the Cingular Settings as the default.
Click to expand...
Click to collapse
Tried your fix with wm6 on 8525 that you have and still get message current connection cannot be used. Any suggestions.
Trouble With Exchange ActiveSync
WpBear, I really appreciate you setting up these CABs. But I have to report a problem I encountered which caused me some major stress on Friday until I figured it out.
Basically after applying your settings CAB after flashing a new ROM, the first thing I want to do is set up Exchange ActiveSync with my work email so I can get over-the-air synch.
I had previously flashed Kyphur's WM6 ROM, entered my data settings manually, set up my Exchange synch manually, and all was working well for several days.
I ended up flashing Kyphur's ROM again and decided to take advantage of your Cingular Settings CAB to save a little time. Of course, foolishly I did not check out my Exchange synch assuming it would work. I went ahead and installed all my other apps and got the phone back into shape. Next morning (Friday) I noticed I did not have any work emails waiting on the phone - strange.
I then tested the Exchange synch and found it did not work. I was getting an ActiveSync error on the phone about needing a cellular connection to perform the synch (which took me several hours to find).
Bottom line is, no matter what I did with the MEdia Net or My ISP connections , I could not get rid of the ActiveSync error. The only thing I can do is reflash the ROM and enter data settings manually. I have already done this and confirmed it works - I can now synch over-the-air with Exchange again.
Anyway, I just wanted to put this message out there in case anyone else encounters this problem. Hopefully it will save them from the stress and panic I encountered for a while until I figured it out.
wap settings and activesync
I have the same problem. if I install the cingular cabs my active sync gives errors. have to use HTweakC with LVSW to keep data connection always on after manually setting carrier wap settings. but th problem is now my Cingular MediaNET MMS doesn't connect.
Same here, I have tried manual setup and the attached CAB files, both fail to give connection to Cingular MEdiaNet MMS when using LVSW.
kevntrace said:
The only thing I can do is reflash the ROM and enter data settings manually.
Click to expand...
Click to collapse
I do hope you meant to say you were doing a hard reset (versus literally reflashing the ROM) each time you had to start fresh...?
If you are not using exchange server AS then check if you are username and password are entered. Thia was a mentioned problem I listed a few posts back. As far as AS exchange I do not use this since the agency I work for does not allow personal devices sync with theirs. I use POP3 and tested it this way.
I have a chance to get a touch for 40$ which is a good deal right?
Also can I flash it to cricket and internet and all will work and after I flash it I could put android on it correct?
I could easily find out how to flash to cricket by reading but am confused by the android part isnt it flashing a new rom so I couldnt connect to cricket? Thanks will be back tonight to reply so leave as many suggestions as possible
Thank You all
no flashed rom needed for android
after you have flashed you touch to what ever rom works for you. there will no need to flash it for android because android as it is will not replace windows. andriod runs off of the sd card. just read forum for android on the touch it should any question you have.
What are the downfalls to android?
Kasaki said:
What are the downfalls to android?
Click to expand...
Click to collapse
with Android running off the MicroSD, texting works only partially (Sprint/Verizon texts give "bad SMS encoding" errors) and web not at all due to Cricket's dumb proxy settings
this is the case with the XV6800, and i am sure the Touch will have the same dilemma
catfishk said:
and web not at all due to Cricket's dumb proxy settings
Click to expand...
Click to collapse
I got it working by editing the default APN and setting up the proxy that way.
edu help
how did you get the APN to work with cricket using android and vogue. what are the settings, theres so many to input. Also for some reason i can make calls or anything is this becasue im not connected to a network?
oceilot said:
how did you get the APN to work with cricket using android and vogue. what are the settings, theres so many to input. Also for some reason i can make calls or anything is this becasue im not connected to a network?
Click to expand...
Click to collapse
Can you make calls or not?
If you can't call or recv is your ESN in the cricket system.
Did this just start happening?
If you can not make calls but can recv calls go to EPST setting/CDMA setting and change the following..
EVRC enable = enable
and the three below it change to EVRC
make sure you have cricket PRL
HOME SID/NID are correct
ESN matches cricket system
MDN/MIN are correct
Everything works fine now, call and text. However mobile web is still a no go. In the new Ion build there is no APN settings program, just APN under settings for the android. When I add my user name and password to my current APN it still wont log on.
Everything works fine now, call and text. However mobile web is still a no go. In the new Ion build there is no APN settings program, just APN under settings for the android. When I add my user name and password to my current APN it still wont log on.
Click to expand...
Click to collapse
Web works on mine. reset your modem settings using the modem icon. You may have to dl a new modem app though.
The APN settings should be the same as the settings you used on the window mobile settings, wap.mycricket.com port 8080 etc etc.
How do you change the modem settings? Ive entered all the information in APN like user name,password, por,t proxy, is there anything else you said..... meaning theres more?
edru said:
I got it working by editing the default APN and setting up the proxy that way.
Click to expand...
Click to collapse
So what are the correct APN setting to make these cupcake builds work on Cricket???
actually at this time i have no idea if it works or not as they removed the ppp.username ppp.password from teh default.txt and from then on it seemed to have killed the data connection.
All i did was go into the wireless networks settings, or APN settings in wireless settings and modify teh defulat. I changed all the settings that you would in WinMo and left the rest as they were and it all worked. Currently trying to download a new system image file so I can test it.
proxy question
hi i have htc vogue on cricket and im using donut 1.6 flashable rom and i have data working with no problems. But only in browser not through any of the apps or activate my google account. i have been reading and they say its because of cricket port wont let us reach out. also there has been mention of buying cricket 15 html plan but is there a proxy bypass or workaround out there thank you
dru28 said:
hi i have htc vogue on cricket and im using donut 1.6 flashable rom and i have data working with no problems. But only in browser not through any of the apps or activate my google account. i have been reading and they say its because of cricket port wont let us reach out. also there has been mention of buying cricket 15 html plan but is there a proxy bypass or workaround out there thank you
Click to expand...
Click to collapse
The HTML data plan is a good work around but is not a 100% sure fix because in different markets it also works through the Simple IP. There are other work arounds like the broadband hack. But that requires a broadband number.
I know this is a bit old but has anything changed here to make Android market/data work on cricket data plan? I am still confused as to what settings in android to make (followed all of whitey's instructions for cricket)
New cricket thread
can someone that is way smarter at programming these phones for cricket look into this thread and see if its legit
http://www.thefuzz4.net/home/Forums...did/263/scope/posts/threadpage/2/Default.aspx
looks promising but....
benjammnaz said:
can someone that is way smarter at programming these phones for cricket look into this thread and see if its legit
http://www.thefuzz4.net/home/Forums...did/263/scope/posts/threadpage/2/Default.aspx
looks promising but....
Click to expand...
Click to collapse
It looks legit to me...
Just purchased a TP2 and completed the HardSPL and installed the EnergyROM. However I still can't get the picture messaging to work correctly. My previous phone was a unlocked Sony W810i which I'm able to send and receive MMS messages with no problem. I've tried to duplicate some of the settings from phone to phone but I haven't had good results. I didn't want to spend the extra money for the data plan because the phone has WIFI built in. All I want to do is be able to send and receive MMS messages. Can anyone help? Thanks.......Jason
go back to where you downloaded your rom and look for the mms settings cab and keyboard cab. nrg's energyroms always has a cab for it...
or you can do it yourself its easy
go to connections
select tmo mms
hit edit and change the access point to wap.voicestream.com
leave everything els the same way and save haha its easy
after having to flase a new rom every day(im addicted) you memorize it
Under the T-Mobile MMS I have
Server name: T-Mobile MMS
IP address: 216.155.165.50
Port number:8080
Server address:216.155.174.84/servlets/mms[/url]
Connect via: T-Mobile MMS
Message size limit: 300KB
WAP Version: WAP 2.0
Where do I enter the access point name?
This ROM does have T-mobile setup program but the settings for MMS will not work. I don't why I can't get it to work, I can send MMS on my W810i with no problems.
http://thewingster.com/Documents/MMS Fix (M2.1) (T-Mobile).cab
CLICK HERE AND INSTALL THIS CAB...NEXT TIME SEARCH BEFORE YOU ASK.
akademik_acheeba said:
http://thewingster.com/Documents/MMS Fix (M2.1) (T-Mobile).cab
CLICK HERE AND INSTALL THIS CAB...NEXT TIME SEARCH BEFORE YOU ASK.
Click to expand...
Click to collapse
Thanks, but the CAB still didn't work. I can receive, but I still can't send. Also, I have been searching on multiple forums, so don't just assume that I haven't been looking. I have been searching and trying different settings for 2weeks.
djelwood said:
Thanks, but the CAB still didn't work. I can receive, but I still can't send. Also, I have been searching on multiple forums, so don't just assume that I haven't been looking. I have been searching and trying different settings for 2weeks.
Click to expand...
Click to collapse
ok when you download a rom and have a problem with it, browse that roms forum and look for the bug post. i see you have nrg's energy rom so i went there and found the mms fix...click here....100!!!
akademik_acheeba said:
ok when you download a rom and have a problem with it, browse that roms forum and look for the bug post. i see you have nrg's energy rom so i went there and found the mms fix...click here....100!!!
Click to expand...
Click to collapse
looks like it was sourced to the same .cab file. hmmm did you go into connections and setup mms after the install?
akademik_acheeba said:
looks like it was sourced to the same .cab file. hmmm did you go into connections and setup mms after the install?
Click to expand...
Click to collapse
Yes, I tried setting up the MMS settings after the install. I was having this same problem before I flashed the the NRG ROM. I see that you have T-Mobile, did you have to install the CAB? Do you think I'm having issues becaus I don't have a data plan? I wouldn't think that would be the case because my old unbranded W810i works just fine when sending and receiving MMS. However that phone is not a smart phone. When you are in the connections tab what is the difference between My Work Net Work, and the standard T-mobile Data. Under my work netwok I have no connections set up. However I was reading a thread on a different forum that instructed you to setup a MMS connection under MY WORK NETWORK. I tried that, but it din't work. Also, everytime I try to send an MMS I get a message that says my current data connection will be stopped in order to send the MMS and then you have to select OK, is that normal? Sorry for the paragraph...this is driving me crazy.
did you go to start/settings/connections/connection setup and select your country and operator? that should have done the trick. if that dont do it then this is what you do. since the tmo mms .cab dosent fix it and your connections are set and it still wont work, go to tmobile.com and grab the 6.5 rom upgrade, flash it, soft reset,(this will set all your settings to tmobile network), try to mms and if successful, flash back the NRG rom and use the .cab for mms linked on his rom thread(also get the keyboard fix). it will take you about half an hour. if you dont want to do that then wait and see if someone else has a solution. theres 183 views on this thread and no one stepped in to give advise. i have unlimited everything with tmo and i have no issues with mms. hope you can mms soon...
djelwood said:
Just purchased a TP2 and completed the HardSPL and installed the EnergyROM. However I still can't get the picture messaging to work correctly. My previous phone was a unlocked Sony W810i which I'm able to send and receive MMS messages with no problem. I've tried to duplicate some of the settings from phone to phone but I haven't had good results. I didn't want to spend the extra money for the data plan because the phone has WIFI built in. All I want to do is be able to send and receive MMS messages. Can anyone help? Thanks.......Jason
Click to expand...
Click to collapse
I don't mean to slam you...too badly, but if you don't know how to fix this simple problem, you probably shouldn't be flashing roms. The fix was in the 3rd post, but obviously you haven't used Windows Mobile long enough to know what he was talking about, and you haven't searched for the answer long enough.
So with that said I will walk you through it.
1. Go to the Start Menu, Settings, Connections, and run Connection Setup. Ensure that you have selected United States for country and the operator is T-mobile. Click Ok. Then Yes.
2. Soft Reset
3. Go to the Start Menu, Settings, Connections, and open Connections.
4. Click on the "Advanced" Tab, select Networks, on the pull-down menu select T-Mobile MMS, and click edit.
5. The Radio tab next to T-mobile MMS should be selected, if not click it, then click edit and the bottom of the screen.
6. Click Next on the Name Connection Screen.
7. The next screen should be Access Point Name.
8. Change this to wap.voicestream.com
9. Click Next, on the next screen click finish, and the following click ok.
10. Change the box for "Programs that automatically connect to......." to T-mobile Data and click ok.
11. Soft Reset
I verified these steps as flashed the new version of NRG rom.
diablc said:
I don't mean to slam you...too badly, but if you don't know how to fix this simple problem, you probably shouldn't be flashing roms. The fix was in the 3rd post, but obviously you haven't used Windows Mobile long enough to know what he was talking about, and you haven't searched for the answer long enough.
So with that said I will walk you through it.
1. Go to the Start Menu, Settings, Connections, and run Connection Setup. Ensure that you have selected United States for country and the operator is T-mobile. Click Ok. Then Yes.
2. Soft Reset
3. Go to the Start Menu, Settings, Connections, and open Connections.
4. Click on the "Advanced" Tab, select Networks, on the pull-down menu select T-Mobile MMS, and click edit.
5. The Radio tab next to T-mobile MMS should be selected, if not click it, then click edit and the bottom of the screen.
6. Click Next on the Name Connection Screen.
7. The next screen should be Access Point Name.
8. Change this to wap.voicestream.com
9. Click Next, on the next screen click finish, and the following click ok.
10. Change the box for "Programs that automatically connect to......." to T-mobile Data and click ok.
11. Soft Reset
I verified these steps as flashed the new version of NRG rom.
Click to expand...
Click to collapse
I appreciate your help, and I did try doing this before with 6.1, with 6.5, and with the NRG ROM. Maybe I missed a step or installing the MMS T-mobile cab screwed it up. However I did get it to work this time. Maybe I'm not a WM guru like you, but I'll be enjoying my NRG ROM now. Would you like to make a donation for your help? I know everyone gets tired of answering the same question over and over, however I have honestly been searching different forums and trying different fixes cabs etc.. Once again thanks for everyone's time. Too bad you have to get flamed for asking.
djelwood said:
I appreciate your help, and I did try doing this before with 6.1, with 6.5, and with the NRG ROM. Maybe I missed a step or installing the MMS T-mobile cab screwed it up. However I did get it to work this time. Maybe I'm not a WM guru like you, but I'll be enjoying my NRG ROM now. Would you like to make a donation for your help? I know everyone gets tired of answering the same question over and over, however I have honestly been searching different forums and trying different fixes cabs etc.. Once again thanks for everyone's time. Too bad you have to get flamed for asking.
Click to expand...
Click to collapse
good to hear u all set.u dont have to be a wm guru to know your question. u only have to be a search guru, your question was very elementary.
sorry, wrong thread, please delete
Does any one know how to make the MMS work?
I dont see a place to input the info on the straight talk activation instructions.
MMSC
MMS Proxy
MMS Port
I was only able to find the place to input the APN (att.mvno) doing this made the internet work.
So when I get a pic mail my phone shows me the text from it and tries to download it. But it fails. says Invalid MSISDN Number Received.
SMS works fine.
Sprint Touch Pro 2 TP2 Windows mobile 6.5. I have the Wall mart straight talk $15 sim card (bring your own phone) plan. I put it in the sim card slot on my Sprint TP2 and went through the steps to enable the phone to use GSM towers in the states. Calling works. But internet is only on EDGE (slower then sprints 1X) I think that is all the phone is capable of with the GSM raido it contains.
I searched the registry and found something like Http://mms.sprintmms.com changed it to http://mmsc.cingular.com and that did not work.
I dialed ##778# and hit view. there is nothing in there that looked related.
I went to start, settings, connections, connections, manage existing connections, and deleted what was there and maid a new one called Data and put att.mvno as the Access point name but there is no place to enter the mms settings in there.
I have searched google for hours and days. I give up. Some one out there has got to know the answer. Can you help?
travissand said:
Does any one know how to make the MMS work?
I dont see a place to input the info on the straight talk activation instructions.
MMSC
MMS Proxy
MMS Port
I was only able to find the place to input the APN (att.mvno) doing this made the internet work.
So when I get a pic mail my phone shows me the text from it and tries to download it. But it fails. says Invalid MSISDN Number Received.
SMS works fine.
Sprint Touch Pro 2 TP2 Windows mobile 6.5. I have the Wall mart straight talk $15 sim card (bring your own phone) plan. I put it in the sim card slot on my Sprint TP2 and went through the steps to enable the phone to use GSM towers in the states. Calling works. But internet is only on EDGE (slower then sprints 1X) I think that is all the phone is capable of with the GSM raido it contains.
I searched the registry and found something like Http://mms.sprintmms.com changed it to http://mmsc.cingular.com and that did not work.
I dialed ##778# and hit view. there is nothing in there that looked related.
I went to start, settings, connections, connections, manage existing connections, and deleted what was there and maid a new one called Data and put att.mvno as the Access point name but there is no place to enter the mms settings in there.
I have searched google for hours and days. I give up. Some one out there has got to know the answer. Can you help?
Click to expand...
Click to collapse
In your MMS app, go to menu>MMS options>servers>add new server. If it's greyed out you have to do a reg edit in HKLM>Software>ArcSoft>MUI and look for "enable server edit" and change the DWORD to "1" After you change that, go back to the MMS options and "add new server" with the following data:
Server - Straight Talk MMS
Gateway - 66.209.11.33
URL - http://mmsc.cingular.com
Port - 80
Connect Via - Whatever you named your connection previously.
When you're done make sure you set that as your default server. I'm doing this from memory so I may have missed a step or the reg edit key may be named differently on the Sprint TP2. BTW, the Sprint and Verizon TP2 only supports EDGE speeds on the AT&T bands. 3G is for the AWS (1700) band like T-Mobile, HTC really screwed the pooch on that one.
Nice thank you very much for your help. My mms works now. I cant believe I did not think to check in my mms program for the place to enter the settings.
I did have to change the registry value to a 1 to gain access to the greyed out button. It was in HKLM>Software>ArcSoft>Arcsoft MMS UA>Config>UI>
Now if I can only get the mms and the sms time to be correct. Do you know any thing about that? My friend can be sitting next to me and send me a sms that I get instantly but the incoming time on the message shows totally wrong. It was like this when I was on Sprints service also. I flashed stock 6.1 and 6.5 and neither fixed it. I have Since or Touch Flow or what ever its called turned off. Just running basic home screen Spb Pocket plus 4.1.0, Spb Phone Suite 1.3.1, Garmin, Pocket shield and some other basic programs. I have a faint memory that out of the box this was not a problem. It may have been after I flashed and installed that it started. But then why did flashing back to stock not fix it? I have never flashed anything other then stock.
travissand said:
Nice thank you very much for your help. My mms works now. I cant believe I did not think to check in my mms program for the place to enter the settings.
I did have to change the registry value to a 1 to gain access to the greyed out button. It was in HKLM>Software>ArcSoft>Arcsoft MMS UA>Config>UI>
So you say that I can get 3G if I get the Wallmart Straight Talk sim card that uses Tmobile? Wow I will try that. My brother just ordered one from Straight talk for his T mobile branded TP2. I will try it in my phone. T mobile has almost as good of reception here on the big island of hawaii as AT&T does.
Now if I can only get the mms and the sms time to be correct. Do you know any thing about that? My friend can be sitting next to me and send me a sms that I get instantly but the incoming time on the message shows totally wrong. It was like this when I was on Sprints service also. I flashed stock 6.1 and 6.5 and neither fixed it. I have Since or Touch Flow or what ever its called turned off. Just running basic home screen Spb Pocket plus 4.1.0, Spb Phone Suite 1.3.1, Garmin, Pocket shield and some other basic programs. I have a faint memory that out of the box this was not a problem. It may have been after I flashed and installed that it started. But then why did flashing back to stock not fix it? I have never flashed anything other then stock.
Click to expand...
Click to collapse
See, I didn't buy the Walmart ST SIM. I went straight to their website (straighttalkgsm.com) and got an AT&T SIM. I know you have the choice of T-Mobile or AT&T but I think it depends on the area code you will be using. As for the time stamp issue, that sounds more like a software bug than a carrier issue. Just for ****s and giggles, did you enter the proxy info in your connections? I know when I use the proxy info, mobilespeedtest.com reports my ISP as AT&T-Cingular, when I go without the proxy it lists my ISP as "shared block". Whatever that means. Google Maps also locates me faster when I have the proxy info entered. Of course, when I have to tether, I un-check proxy settings. BTW, you didn't hear that from me.
fatclue said:
See, I didn't buy the Walmart ST SIM. I went straight to their website (straighttalkgsm.com) and got an AT&T SIM. I know you have the choice of T-Mobile or AT&T but I think it depends on the area code you will be using. As for the time stamp issue, that sounds more like a software bug than a carrier issue. Just for ****s and giggles, did you enter the proxy info in your connections? I know when I use the proxy info, mobilespeedtest.com reports my ISP as AT&T-Cingular, when I go without the proxy it lists my ISP as "shared block". Whatever that means. Google Maps also locates me faster when I have the proxy info entered. Of course, when I have to tether, I un-check proxy settings. BTW, you didn't hear that from me.
Click to expand...
Click to collapse
Wow checking the proxy box and putting in 66.209.11.33 does change my results from Shared IP Block to At&t. And it is 4 times faster.
I was getting a consistent download speed of only 77 Kbps and 1.1 Latency
Now I get 295 down and 2.1 Latency.
Im testing some data intensive websights now. Ok they are much faster now. All most as fast as my week reception sprint EVDO revA phone tethered to my router. The only thing sprint has over ST is that sprint does not throttle me until 30 gigs. And I have read that with the AT&T ST sim people are not getting away with much. DSL just came to my part of the jungle so I got rid of my sprint plan. I have no need to tether so much now.
I edited out my confusion from the above posts. It looks like I will never have 3g on the t-mobile or AT&T sim card on my TP2. Here is a link to some supportive reading about why 3G will not work. http://forum.xda-developers.com/showthread.php?t=561656
One more thing I can send and receive Hotmail but cant send and receive Yahoo. When I try it says "Cannot connect with current connection settings. To change your connection settings, tap Settings. Settings". Then If I uncheck proxy it works but then I have to go back later to re check and put in 66.209.11.33 to get my faster speed back. Why can Hotmail do it but Yahoo can not?
I had the same problem and all I did was flash a new radio which helped with signal.
Just for fun I put a T-mobile sim card from T-mobile in my TP2. My Edge internet was very slow. So put in the proxy that Straight talk gives there users with T-mobile sims and it was still very slow. Super slow compared to using the Att proxy with the ATT ST sim in my TP2.
One interesting thing I noticed is that this sim had many more electrical contact points on it and it automatically set up the correct MMS setting for me. In comparison the ST sim card had lass contact points and I had to enter the MMS manually my self.
This TP2 Im using this week is bone stock out of the box and it is not handling daylight savings time correctly when putting the time stamp on the sms. I bet there are many good threads about fixing this I have not yet searched.
travissand said:
One more thing I can send and receive Hotmail but cant send and receive Yahoo. Why can Hotmail do it but Yahoo can not?
Click to expand...
Click to collapse
Simple the settings for the Hotmail account where correct and the ones for yahoo where not.
So this was an easy fix. I click on my sms program. click menu, tools, options, click on my yahoo account, edit account setup,next,next,next, next,advanced server settings. So in here is where i had it wrong. It was on my old internet settings so I changed "network connection" to "internet" that way it will even sync my email using wifi if its on and has internet, instead of needlessly requiring to dial up over the cell data connection.
I tryed this change in the MMS settings also but my MMS wont send so I had to change it back to the cellular data connection.