Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
EDIT: Uploaded wrong CAB. New one is good.
EDIT: Added CAB with Both WAP and MMS.
EDIT: Fixed w/MMS CAB to add the Cingular Settings as the default.
EDIT: Replaced with Fixed CAB for Exchange AS and the user/pass stick now. Also added OPEN DNS servers for quicker "locating"
EDIT: Added No ICON Change CAB as requested.
wpbear said:
Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
Click to expand...
Click to collapse
Wow, thanks wpbear, that will come in handy when I finally do decide to upgrade to WM6
Does this include the MMS settings?
Installation of Cingular WAP Settings.cab was unsuccessful
rkorzuch said:
Does this include the MMS settings?
Click to expand...
Click to collapse
No maybe I will look into adding that.
slimsaturn said:
Installation of Cingular WAP Settings.cab was unsuccessful
Click to expand...
Click to collapse
Do you already have the Cingular settigns there and ran this over it, maybe the Reg Keys cant be written if you already have a Cingular setup or if you are just online at the time. I tested it by deleting my connetions and, since My ISP cant be deleted totally, I blanked all the info from it. Then ran the CAB and SR then I had my settings correct.
Also it is tested on Hermes only and the reg keys came from WM6. I can not test on WM5 right now.
I only set up the wap settings. I deleted that first then tried to run it.
slimsaturn said:
I only set up the wap settings. I deleted that first then tried to run it.
Click to expand...
Click to collapse
I had just did a cleared storage so my phone was plain no settings ad I was unsuccessful also.n
I just re-uploaded a newer one, maybe I uploaded the wrong one or it was a bad transfer on my end. The new one is in the first post.
Check 1st post again for MMS.
That should do it the old one was 4kb
Cool. I am one of the quilty ones that did not know how to set it up so I definately appreciate it. I ended up figuring this out around 2am this morning.
But the downloads still seem a little slow. Im using 1.27 radio and XDA 0.20.1.
I noticed the MMS CAB didn't put the Cingular Setting as the "Default" in the new LVSW version so I fixed the second CAB.
Also I noticed that sometimes all the connection/modem settings are correct except the User name and Password sometimes do not stick. All the other info stays.
If it doesn't stick after the soft reset:
User Name: [email protected]
Pass: CINGULAR1
THESE ARE CASE SENSITIVE! Even adding this little bit is better than creating the entire connection every HR. I am looking at the CAB to see if I can make it better. Probably have to write an XML file to do, I hate those so...
Cannot install either
slimsaturn said:
Installation of Cingular WAP Settings.cab was unsuccessful
Click to expand...
Click to collapse
This is exactly what I need but I'm getting the same error. Tried running the Cab from main memory and from my storage card. Using LVSW on a TYTN - no settings currently exist so there's nothing to overwrite. Please help.
Edited: installing directly from this thread (rather then downloading and moving to my device seems to work)
jvence said:
This is exactly what I need but I'm getting the same error. Tried running the Cab from main memory and from my storage card. Using LVSW on a TYTN - no settings currently exist so there's nothing to overwrite. Please help.
Edited: installing directly from this thread (rather then downloading and moving to my device seems to work)
Click to expand...
Click to collapse
I think these problems are from bad downloads. The ftp has caused this on other downloads for me latelty. A redownload fixed it on other cab I have tried. I had the problem on 8525software.com before too.
COnfused
wpbear said:
Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
EDIT: Uploaded wrong CAB. New one is good.
EDIT: Added CAB with Both WAP and MMS.
EDIT: Fixed w/MMS CAB to add the Cingular Settings as the default.
Click to expand...
Click to collapse
Tried your fix with wm6 on 8525 that you have and still get message current connection cannot be used. Any suggestions.
Trouble With Exchange ActiveSync
WpBear, I really appreciate you setting up these CABs. But I have to report a problem I encountered which caused me some major stress on Friday until I figured it out.
Basically after applying your settings CAB after flashing a new ROM, the first thing I want to do is set up Exchange ActiveSync with my work email so I can get over-the-air synch.
I had previously flashed Kyphur's WM6 ROM, entered my data settings manually, set up my Exchange synch manually, and all was working well for several days.
I ended up flashing Kyphur's ROM again and decided to take advantage of your Cingular Settings CAB to save a little time. Of course, foolishly I did not check out my Exchange synch assuming it would work. I went ahead and installed all my other apps and got the phone back into shape. Next morning (Friday) I noticed I did not have any work emails waiting on the phone - strange.
I then tested the Exchange synch and found it did not work. I was getting an ActiveSync error on the phone about needing a cellular connection to perform the synch (which took me several hours to find).
Bottom line is, no matter what I did with the MEdia Net or My ISP connections , I could not get rid of the ActiveSync error. The only thing I can do is reflash the ROM and enter data settings manually. I have already done this and confirmed it works - I can now synch over-the-air with Exchange again.
Anyway, I just wanted to put this message out there in case anyone else encounters this problem. Hopefully it will save them from the stress and panic I encountered for a while until I figured it out.
wap settings and activesync
I have the same problem. if I install the cingular cabs my active sync gives errors. have to use HTweakC with LVSW to keep data connection always on after manually setting carrier wap settings. but th problem is now my Cingular MediaNET MMS doesn't connect.
Same here, I have tried manual setup and the attached CAB files, both fail to give connection to Cingular MEdiaNet MMS when using LVSW.
kevntrace said:
The only thing I can do is reflash the ROM and enter data settings manually.
Click to expand...
Click to collapse
I do hope you meant to say you were doing a hard reset (versus literally reflashing the ROM) each time you had to start fresh...?
If you are not using exchange server AS then check if you are username and password are entered. Thia was a mentioned problem I listed a few posts back. As far as AS exchange I do not use this since the agency I work for does not allow personal devices sync with theirs. I use POP3 and tested it this way.
Related
I have Qtek 9100, and I recently upgraded my rom to 2.26.10.2 WWE. after the upgrade, I don't have any MMS capability. When I go to Messaging, then menu, there is no 'MMS Configuration' tab. No MMS anything even on my folder drop down list. I tried the Cingular MMS Cab that was posted. and that didn't work. GPRS and the internet connect just fine.
Any Idea?
check this thread:
http://forum.xda-developers.com/viewtopic.php?t=61619
check this thread:
http://forum.xda-developers.com/viewtopic.php?t=61619
I did
I did actually go to that forum first. I install the Cingular MMS Cab, and it didn't work. I still couldn't find the 'MMS Configuration' anything. I don't really know how to do the extended ROM stuff. I know how to set up the MMS configuration for cingular once I can get to it. But I can't even get to the setting.
:?:
Had a simular experience.
Recent hard reset and no Extended ROM anything. Didn't start up at all.
Now this is good and bad.
I have the GPRS settings done but am struggling with MMS
I believe i have the base settings correct but i am unable to set up an MMS account in the place where email, TXT and hotmail goes.
As you can see i am on Vodafone UK with a monthly contract
any help appreciated
I just had the same issue last night. Hard reset, and non of the customisations loaded.
So i loaded a new rom to it instead
I had the same problem when i first got my phone. It was because of my data plan. I believe the customization takes place by downloading. I didnt have the Cingular PDA Data plan. Im tryin to beat the system with just media max data plan. its cheaper and few texts are included! you may have to add the PDA data plan in order to get the custom installations.
Make sure you look under Menu -> Tools -> Options. MMS will show up in there, if you're using the CAB I posted. I'm still trying to figure out how to make it show up in the menu itself versus having to go through the above shenanigans. Maybe I'll revisit that today when I should be working instead.
well, I still have the same plan as before I upgraded my ROM. and it worked great. No data plan, just the media bundle (or whatever they call it hese days). After I upgraded the ROM, there's no MMS even when I go to menu->tool ->option ->new account , it just do the email setting again. This happened also the first time I got the phone, and someone from cingular send me the setting on air (smart message or something) and it opens the "mms configuration" tab under the menu list. Then it worked just fine until I upgraded the damn ROM. Do you think is a problem during ROM upgrade process? Will redoing the ROM upgrade help? I rather not do this again.
Thanks everybody!
Which CAB did you install from that thread? The one in Dr P's post, or the one in my post?
i installed yours. and actually, since I've been up all night trying to tinker with this, I actually found a fix posted by Molski. And It works now. It doesn't have the direct 'mms configuration" tab to get to the setting, but at least now MMS is in the folder list and I could set up things from there. It seems to be working fine now.
Thanks for all the reply and helps, and shout out to Molski too.
This is the thread that I was looking at just incase someone is having the same problem
http://forum.xda-developers.com/viewtopic.php?t=59513&postdays=0&postorder=asc&start=25
I still don't know why or what the problem was though. Will I have to go through the same thing again when I decide to upgrade the ROM in the future?
You shouldn't have to. And that CAB file I posted should have done basically the same thing. I can't figure out why it didn't. I know I use a slightly different one when I bulldoze my 8125, but if I remember it's because I included some personal settings in there. I can't remember now.. But I may go dig it up, and if it isn't, post it here as well..
Okay, I just looked at the CAB files, and I see what I did.
Basically, the one I posted there just has the settings to fix the resizing issue. It doesn't actually create the MMS folder.
I have another CAB that I use that does create the MMS folder, and then I do my actual settings in a CAB file I use with a bunch of different settings.
I think I'll merge the two CAB files together and post 'em.
what resizing issue was there? since I have installed yours before the other CAB, should I reinstall yours again?
Probably wouldn't have to, unless it adjusts the camera settings.
Basically, if you blitz your device, and don't install any of the Cingular customizations, you don't get MMS. THere's a CAB in the Extended ROM that if you do install it, you get MMS, but there is a sizing issue with images. For example, I may have sent myself an image sized at 90k taken with my phone to myself, but when I receive it, it's a thumbnail sized image at about 3k. With the settings adjustments in the cab file I made, it would be the full sized 90k image.
to avoid all this I sugguest u call cingular and get a data plan.. hard reset or update ur rom or whatever u wanna do. and see if the mms appears then. after that call them back and cancle that data plan... it worked for me
I have already fixed the problem using the fix posted earlier. I am still using the same plan as before, and it's working fine. I thought the data plan is for GPRS connection using a laptop, for example. Anyhow, I just use the media package from cingular and I have been able to access the internet using my phone.
I'm using Cingular 8525 on US T-mobile network, internet set to t-mobile settings, I can connect through GPRS or wifi with Opera browser, bur if I use IE, it always display an error message: "The page cannot be found. Check the name and try again." no matter what site I try.
Getting desperate, any help is appreciated!
My limited understanding is that Cingular hard coded their proxy settings in to PIE and thus it does not matter what settings you have specified in the connection settings menu, it will still try and use Cingular's Proxy.
There is a fix....search for it...
Dan
I found the posts about the hard coded proxy setting, but I'm using AKU2.3 ROM and do not have the [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] "EnableAutoDetect" key.
After hard reset and re-install some programs, the connection was ok first, then started to show that error message again.
Is this proxy setting located in somewhere else in AKU2.3 ROMs?
I am not sure to behonest with you. I do not even know if it was employed in the 2.3 AKU.
I will edit my post later when I am in front of TyTN there is one other thing to try that might fix it..
Dan
cpz21 said:
I found the posts about the hard coded proxy setting, but I'm using AKU2.3 ROM and do not have the [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] "EnableAutoDetect" key.
After hard reset and re-install some programs, the connection was ok first, then started to show that error message again.
Is this proxy setting located in somewhere else in AKU2.3 ROMs?
Click to expand...
Click to collapse
Yeah the problem is that is comes back if you only change it from 1 or 0....DELETE the "EnableAutoDetect" key and it wont come back. You lose all Cingular Proxy though so if you are on Cingular and want MediaNet or CV then do not do this.
dan1431 said:
I am not sure to behonest with you. I do not even know if it was employed in the 2.3 AKU.
I will edit my post later when I am in front of TyTN there is one other thing to try that might fix it..
Dan
Click to expand...
Click to collapse
Thanks Dan. I did search and found no [EnableAutoDetect] setting anywhere in the registry. But I think you are right that this is a Cingular hard coded IE issue since Opera connects anytime. Please let me know if you found anything.
Cheers
wpbear said:
Yeah the problem is that is comes back if you only change it from 1 or 0....DELETE the "EnableAutoDetect" key and it wont come back. You lose all Cingular Proxy though so if you are on Cingular and want MediaNet or CV then do not do this.
Click to expand...
Click to collapse
Hi wpbear, thanks. but I don't have the [EnableAutoDetect] key to begin with. I don't care much about the cingular stuff since I'm on t-mobile network.
I guess I will upgrade to the AKU3.3 rom, and hope the problem will go away
Found the cause myseslf, but don't know why:
It seems that every time I connect to activesync, something in the registry is changed, then PIE cannot connect to the internet. I can't figure out what registry key was changed, so I have to restore the entire registry in order to used PIE again.
Anyone had this problem before?
I got my Cingular 8125 about a month ago, and I just recently noticed that I didn't have any MMS features available. So I contacted Cingular and they were absolutely no help, but I did figure out that my phone had a custom OS uploaded by the previous owner, and it said Molski.biz AKU2.3 (2.26.10.2 WWE) on the startup screen.
So I did some searching on here and found out that Molski creates some awesome ROMs for our phones, and I found a download link to upgrade to AKU3.3 that is supposed to have MMS support and all sorts of other cool stuff. I upload the new ROM as instructed, and the phone works but there are absolutely no differences between 2.3 and the new 3.3. The only thing that's different is the startup splash screen, it now displays a Windows logo and old one simply said Molski.biz in red letters.
The ROM version and everything else is still the same, and I have no MMS features, no Smartskey, extra themes, etc. that the new Molski ROM is supposed to have.
Can anyone help me?
Phone info (before & after AKU3.3 install is the SAME)
G3 HTC Wizard
ROM: 2.26.10.2 WWE
GSM: 02.25.11
SPL: 2.26
IPL: 2.26
Since you upgraded and only the splash screens changed and not the rom, it sounds like iti probably isn't CID Unlocked (so they may have used shell tool or something). What you should do is CID Unlock it just to be sure if you want to play with various custom roms (like Molski, Faria, and all the WM6 ones):
http://forum.xda-developers.com/showthread.php?t=285435
Here's another link to keep handy for overall steps of flashing:
http://forum.xda-developers.com/showthread.php?t=298613
Now, with that said, if all you want to do is get MMS working, here's a cab for Cingular (I'm assuming thats who you have, you didn't say) that will get MMS going
That worked .. but I still can't download MMS messages when I receive them. It starts downloading but stays at 0% the whole time. I followed the guide on Cingular's website to setup their MMS options and the only thing I noticed is that my phone doesn't have the option to connect via MEdia Net for the downloads. Could that be the problem?
MMS on Cingular MediaNet
K-Fox said:
That worked .. but I still can't download MMS messages when I receive them. It starts downloading but stays at 0% the whole time. I followed the guide on Cingular's website to setup their MMS options and the only thing I noticed is that my phone doesn't have the option to connect via MEdia Net for the downloads. Could that be the problem?
Click to expand...
Click to collapse
You do have to be sure you are operating with MediaNet with proxy to get MMS messages. Go to Settings>Connections>Advanced>Select Networks, hit the dropdown menu selection and pick Media Net rather than My ISP. Then go to Connections>Tasks>Set Up My Proxy Server and be sure that "This networks uses a proxy server to connect to the Internet" is checked. You can't get MMS if you aren't on MediaNet proxy!
cushcalc said:
You do have to be sure you are operating with MediaNet with proxy to get MMS messages. Go to Settings>Connections>Advanced>Select Networks, hit the dropdown menu selection and pick Media Net rather than My ISP. Then go to Connections>Tasks>Set Up My Proxy Server and be sure that "This networks uses a proxy server to connect to the Internet" is checked. You can't get MMS if you aren't on MediaNet proxy!
Click to expand...
Click to collapse
Hmm .. it seems my phone doesn't have the MediaNet option on it. When I go to Connections>Advanced>Select Networks I only have My ISP and My Work Network .. no Media Net option available. I can rename the Work network to say MediaNet if that will work, but I dunno how to configure the proxy for MediaNet. Can anyone gimme the settings from the proxy server?
Try installing this cab and see if it gives you MEdiaNet as an option.
BTW: per a post from Dr. P I saw here, I now keep both this cab and the one I posted above (as well as others) on my SD card so if I have to hardreset or when I switch roms, I can quickly put these settings back on my phone.
I think I found them .. is this it?
https://www.cingular.com/support/deviceConfig.do?content=KB56475.html
mfrazzz said:
Try installing this cab and see if it gives you MEdiaNet as an option.
BTW: per a post from Dr. P I saw here, I now keep both this cab and the one I posted above (as well as others) on my SD card so if I have to hardreset or when I switch roms, I can quickly put these settings back on my phone.
Click to expand...
Click to collapse
Thanks, I'll try it out when I get home later tonight.
I have been going through the t-mobile version of the touch pro 2 and I have not been able to find the settings for "Push Internet".
I did a quick google and found that the T-mobile EU version has removed it, so I assume that the US version also has the same problem.
Is this a rom upgrade issue or is there a cab that can be installed to override the t-mobile settings on the touchflo 3D 2.1?
Thanks,
tech_e said:
I have been going through the t-mobile version of the touch pro 2 and I have not been able to find the settings for "Push Internet".
I did a quick google and found that the T-mobile EU version has removed it, so I assume that the US version also has the same problem.
Is this a rom upgrade issue or is there a cab that can be installed to override the t-mobile settings on the touchflo 3D 2.1?
Thanks,
Click to expand...
Click to collapse
Unless someone on this forum is really clever, I think that we will have to wait until we can flash to a different rom
skyler17 said:
Unless someone on this forum is really clever, I think that we will have to wait until we can flash to a different rom
Click to expand...
Click to collapse
I was hoping that like many things disabled from the pro 2, a quick registry hack might be possible. Anyone know how?
sorry, removed! but at least the FM radio and extra camera settings are found on this blog!
try in here...
HKCU/Software/HTC/Manila.
among the sub file:
-Internet.SetOperaForeground
-InternetPush.PostFirstRun
-PushMailOn
-DefaultBrowserIsIE
those look like points of interest. try changing the values around on those. i already turned the push mail on. but i havent seen a difference yet. maybe because i havent rebooted. but yeah, ill try those and get back to you..
I maybe too newbie but is it T-Mobile (UK?) settings?
Has the push function been removed from the ROM, or is it T-Mobile settings... I couldn't get MS Exchange to sync with T-Mobile default 3g settings so used these which worked... I don't know if it will help th push internet too... Just trying to help, if it's not relevant then flaming not appreciated!
Under the connections tab, edit existing connections...
ISP Name - T-Mobile GPRS
Name of Connection T-Mobile GPRS
Connection Type - Cellular Line (GPRS, 3G)
Portal - general.t-mobile.uk
Username - user
Password - one2one
The default settings use a proxy server which some applications don't like.
josh_prayyforplagues said:
try in here...
HKCU/Software/HTC/Manila.
among the sub file:
-Internet.SetOperaForeground
-InternetPush.PostFirstRun
-PushMailOn
-DefaultBrowserIsIE
those look like points of interest. try changing the values around on those. i already turned the push mail on. but i havent seen a difference yet. maybe because i havent rebooted. but yeah, ill try those and get back to you..
Click to expand...
Click to collapse
I took a look through the registry, I went through the whole thing. I notice in software/HTC/manila there is the settings for push internet. I messed with some settings and it looks like the push internet is enabled by default but the touchflo program is missing the push internet settings button.
Is there a way to hack the layout links on the TF program through the reg?
I dont think you can access TF settings through the registry. i have seen many settings for it. just a couple here and there. We may need a fix for it in the form of a CAB. i dont see anyone figuring this out through RegEdits. im sure a lot of people have been through it and tried different things, so we may just have to wait for a new ROM?
tech_e said:
I have been going through the t-mobile version of the touch pro 2 and I have not been able to find the settings for "Push Internet".
I did a quick google and found that the T-mobile EU version has removed it, so I assume that the US version also has the same problem.
Is this a rom upgrade issue or is there a cab that can be installed to override the t-mobile settings on the touchflo 3D 2.1?
Thanks,
Click to expand...
Click to collapse
what do you mean 'push internet'??? are you referring to push email?
201reyes said:
what do you mean 'push internet'??? are you referring to push email?
Click to expand...
Click to collapse
Push internet is a new thing in the TP2. It downloads web pages on a schedule so they're ready when you need it. T-mobile took out the feature, presumably to save bandwidth.
Epiktetus said:
Push internet is a new thing in the TP2. It downloads web pages on a schedule so they're ready when you need it. T-mobile took out the feature, presumably to save bandwidth.
Click to expand...
Click to collapse
aahhh!!! didn't know that...thanx
I have been checking through reg again.
I think that in the Hkey_CU/Software/HTC/Manila/ we are missing some of the Keys to push internet. I see that you can setup some of the push internet features but there are no options like the URL, download times, or anything, but just below the same area allows you to configure almost every other auto download service like schedule your stock, and download times, weather, auto-download.
Maybe someone with push internet working can post a pic of the push internet settings from Hkey_CU/Software/HTC/Manila/
There's also bound to be an XML file or additional settings in the existing one (InternetPortal-en-us.xml) and t-mobile might have removed a DLL or two. What we really need is a file-comparison of the two devices as well as a registry comparison.
Just purchased a TP2 and completed the HardSPL and installed the EnergyROM. However I still can't get the picture messaging to work correctly. My previous phone was a unlocked Sony W810i which I'm able to send and receive MMS messages with no problem. I've tried to duplicate some of the settings from phone to phone but I haven't had good results. I didn't want to spend the extra money for the data plan because the phone has WIFI built in. All I want to do is be able to send and receive MMS messages. Can anyone help? Thanks.......Jason
go back to where you downloaded your rom and look for the mms settings cab and keyboard cab. nrg's energyroms always has a cab for it...
or you can do it yourself its easy
go to connections
select tmo mms
hit edit and change the access point to wap.voicestream.com
leave everything els the same way and save haha its easy
after having to flase a new rom every day(im addicted) you memorize it
Under the T-Mobile MMS I have
Server name: T-Mobile MMS
IP address: 216.155.165.50
Port number:8080
Server address:216.155.174.84/servlets/mms[/url]
Connect via: T-Mobile MMS
Message size limit: 300KB
WAP Version: WAP 2.0
Where do I enter the access point name?
This ROM does have T-mobile setup program but the settings for MMS will not work. I don't why I can't get it to work, I can send MMS on my W810i with no problems.
http://thewingster.com/Documents/MMS Fix (M2.1) (T-Mobile).cab
CLICK HERE AND INSTALL THIS CAB...NEXT TIME SEARCH BEFORE YOU ASK.
akademik_acheeba said:
http://thewingster.com/Documents/MMS Fix (M2.1) (T-Mobile).cab
CLICK HERE AND INSTALL THIS CAB...NEXT TIME SEARCH BEFORE YOU ASK.
Click to expand...
Click to collapse
Thanks, but the CAB still didn't work. I can receive, but I still can't send. Also, I have been searching on multiple forums, so don't just assume that I haven't been looking. I have been searching and trying different settings for 2weeks.
djelwood said:
Thanks, but the CAB still didn't work. I can receive, but I still can't send. Also, I have been searching on multiple forums, so don't just assume that I haven't been looking. I have been searching and trying different settings for 2weeks.
Click to expand...
Click to collapse
ok when you download a rom and have a problem with it, browse that roms forum and look for the bug post. i see you have nrg's energy rom so i went there and found the mms fix...click here....100!!!
akademik_acheeba said:
ok when you download a rom and have a problem with it, browse that roms forum and look for the bug post. i see you have nrg's energy rom so i went there and found the mms fix...click here....100!!!
Click to expand...
Click to collapse
looks like it was sourced to the same .cab file. hmmm did you go into connections and setup mms after the install?
akademik_acheeba said:
looks like it was sourced to the same .cab file. hmmm did you go into connections and setup mms after the install?
Click to expand...
Click to collapse
Yes, I tried setting up the MMS settings after the install. I was having this same problem before I flashed the the NRG ROM. I see that you have T-Mobile, did you have to install the CAB? Do you think I'm having issues becaus I don't have a data plan? I wouldn't think that would be the case because my old unbranded W810i works just fine when sending and receiving MMS. However that phone is not a smart phone. When you are in the connections tab what is the difference between My Work Net Work, and the standard T-mobile Data. Under my work netwok I have no connections set up. However I was reading a thread on a different forum that instructed you to setup a MMS connection under MY WORK NETWORK. I tried that, but it din't work. Also, everytime I try to send an MMS I get a message that says my current data connection will be stopped in order to send the MMS and then you have to select OK, is that normal? Sorry for the paragraph...this is driving me crazy.
did you go to start/settings/connections/connection setup and select your country and operator? that should have done the trick. if that dont do it then this is what you do. since the tmo mms .cab dosent fix it and your connections are set and it still wont work, go to tmobile.com and grab the 6.5 rom upgrade, flash it, soft reset,(this will set all your settings to tmobile network), try to mms and if successful, flash back the NRG rom and use the .cab for mms linked on his rom thread(also get the keyboard fix). it will take you about half an hour. if you dont want to do that then wait and see if someone else has a solution. theres 183 views on this thread and no one stepped in to give advise. i have unlimited everything with tmo and i have no issues with mms. hope you can mms soon...
djelwood said:
Just purchased a TP2 and completed the HardSPL and installed the EnergyROM. However I still can't get the picture messaging to work correctly. My previous phone was a unlocked Sony W810i which I'm able to send and receive MMS messages with no problem. I've tried to duplicate some of the settings from phone to phone but I haven't had good results. I didn't want to spend the extra money for the data plan because the phone has WIFI built in. All I want to do is be able to send and receive MMS messages. Can anyone help? Thanks.......Jason
Click to expand...
Click to collapse
I don't mean to slam you...too badly, but if you don't know how to fix this simple problem, you probably shouldn't be flashing roms. The fix was in the 3rd post, but obviously you haven't used Windows Mobile long enough to know what he was talking about, and you haven't searched for the answer long enough.
So with that said I will walk you through it.
1. Go to the Start Menu, Settings, Connections, and run Connection Setup. Ensure that you have selected United States for country and the operator is T-mobile. Click Ok. Then Yes.
2. Soft Reset
3. Go to the Start Menu, Settings, Connections, and open Connections.
4. Click on the "Advanced" Tab, select Networks, on the pull-down menu select T-Mobile MMS, and click edit.
5. The Radio tab next to T-mobile MMS should be selected, if not click it, then click edit and the bottom of the screen.
6. Click Next on the Name Connection Screen.
7. The next screen should be Access Point Name.
8. Change this to wap.voicestream.com
9. Click Next, on the next screen click finish, and the following click ok.
10. Change the box for "Programs that automatically connect to......." to T-mobile Data and click ok.
11. Soft Reset
I verified these steps as flashed the new version of NRG rom.
diablc said:
I don't mean to slam you...too badly, but if you don't know how to fix this simple problem, you probably shouldn't be flashing roms. The fix was in the 3rd post, but obviously you haven't used Windows Mobile long enough to know what he was talking about, and you haven't searched for the answer long enough.
So with that said I will walk you through it.
1. Go to the Start Menu, Settings, Connections, and run Connection Setup. Ensure that you have selected United States for country and the operator is T-mobile. Click Ok. Then Yes.
2. Soft Reset
3. Go to the Start Menu, Settings, Connections, and open Connections.
4. Click on the "Advanced" Tab, select Networks, on the pull-down menu select T-Mobile MMS, and click edit.
5. The Radio tab next to T-mobile MMS should be selected, if not click it, then click edit and the bottom of the screen.
6. Click Next on the Name Connection Screen.
7. The next screen should be Access Point Name.
8. Change this to wap.voicestream.com
9. Click Next, on the next screen click finish, and the following click ok.
10. Change the box for "Programs that automatically connect to......." to T-mobile Data and click ok.
11. Soft Reset
I verified these steps as flashed the new version of NRG rom.
Click to expand...
Click to collapse
I appreciate your help, and I did try doing this before with 6.1, with 6.5, and with the NRG ROM. Maybe I missed a step or installing the MMS T-mobile cab screwed it up. However I did get it to work this time. Maybe I'm not a WM guru like you, but I'll be enjoying my NRG ROM now. Would you like to make a donation for your help? I know everyone gets tired of answering the same question over and over, however I have honestly been searching different forums and trying different fixes cabs etc.. Once again thanks for everyone's time. Too bad you have to get flamed for asking.
djelwood said:
I appreciate your help, and I did try doing this before with 6.1, with 6.5, and with the NRG ROM. Maybe I missed a step or installing the MMS T-mobile cab screwed it up. However I did get it to work this time. Maybe I'm not a WM guru like you, but I'll be enjoying my NRG ROM now. Would you like to make a donation for your help? I know everyone gets tired of answering the same question over and over, however I have honestly been searching different forums and trying different fixes cabs etc.. Once again thanks for everyone's time. Too bad you have to get flamed for asking.
Click to expand...
Click to collapse
good to hear u all set.u dont have to be a wm guru to know your question. u only have to be a search guru, your question was very elementary.
sorry, wrong thread, please delete