Database Users

HERE IT IS. Cingular WAP CAB Setup

Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
EDIT: Uploaded wrong CAB. New one is good.
EDIT: Added CAB with Both WAP and MMS.
EDIT: Fixed w/MMS CAB to add the Cingular Settings as the default.
EDIT: Replaced with Fixed CAB for Exchange AS and the user/pass stick now. Also added OPEN DNS servers for quicker "locating"
EDIT: Added No ICON Change CAB as requested.

wpbear said:
Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
Click to expand...
Click to collapse
Wow, thanks wpbear, that will come in handy when I finally do decide to upgrade to WM6

Does this include the MMS settings?

Installation of Cingular WAP Settings.cab was unsuccessful

rkorzuch said:
Does this include the MMS settings?
Click to expand...
Click to collapse
No maybe I will look into adding that.

slimsaturn said:
Installation of Cingular WAP Settings.cab was unsuccessful
Click to expand...
Click to collapse
Do you already have the Cingular settigns there and ran this over it, maybe the Reg Keys cant be written if you already have a Cingular setup or if you are just online at the time. I tested it by deleting my connetions and, since My ISP cant be deleted totally, I blanked all the info from it. Then ran the CAB and SR then I had my settings correct.
Also it is tested on Hermes only and the reg keys came from WM6. I can not test on WM5 right now.

I only set up the wap settings. I deleted that first then tried to run it.

slimsaturn said:
I only set up the wap settings. I deleted that first then tried to run it.
Click to expand...
Click to collapse
I had just did a cleared storage so my phone was plain no settings ad I was unsuccessful also.n

I just re-uploaded a newer one, maybe I uploaded the wrong one or it was a bad transfer on my end. The new one is in the first post.
Check 1st post again for MMS.

That should do it the old one was 4kb

Cool. I am one of the quilty ones that did not know how to set it up so I definately appreciate it. I ended up figuring this out around 2am this morning.
But the downloads still seem a little slow. Im using 1.27 radio and XDA 0.20.1.

I noticed the MMS CAB didn't put the Cingular Setting as the "Default" in the new LVSW version so I fixed the second CAB.
Also I noticed that sometimes all the connection/modem settings are correct except the User name and Password sometimes do not stick. All the other info stays.
If it doesn't stick after the soft reset:
User Name: [email protected]
Pass: CINGULAR1
THESE ARE CASE SENSITIVE! Even adding this little bit is better than creating the entire connection every HR. I am looking at the CAB to see if I can make it better. Probably have to write an XML file to do, I hate those so...

Cannot install either
slimsaturn said:
Installation of Cingular WAP Settings.cab was unsuccessful
Click to expand...
Click to collapse
This is exactly what I need but I'm getting the same error. Tried running the Cab from main memory and from my storage card. Using LVSW on a TYTN - no settings currently exist so there's nothing to overwrite. Please help.
Edited: installing directly from this thread (rather then downloading and moving to my device seems to work)

jvence said:
This is exactly what I need but I'm getting the same error. Tried running the Cab from main memory and from my storage card. Using LVSW on a TYTN - no settings currently exist so there's nothing to overwrite. Please help.
Edited: installing directly from this thread (rather then downloading and moving to my device seems to work)
Click to expand...
Click to collapse
I think these problems are from bad downloads. The ftp has caused this on other downloads for me latelty. A redownload fixed it on other cab I have tried. I had the problem on 8525software.com before too.

COnfused
wpbear said:
Many noobs keep asking how to setup Cingular WAP, My ISP, and MEdiaNet connections after their new ROM upgrade. I made a CAB file to make it easier. Just run the Cab and it does it for you.
I actually made it since I was getting tired of doing it manually after each HR, which most of us do on XDA. It was not rocket science, and I know there are members working on a nice GUI for ALL carriers WAP settings, this should help in the meantime.
EDIT: Uploaded wrong CAB. New one is good.
EDIT: Added CAB with Both WAP and MMS.
EDIT: Fixed w/MMS CAB to add the Cingular Settings as the default.
Click to expand...
Click to collapse
Tried your fix with wm6 on 8525 that you have and still get message current connection cannot be used. Any suggestions.

Trouble With Exchange ActiveSync
WpBear, I really appreciate you setting up these CABs. But I have to report a problem I encountered which caused me some major stress on Friday until I figured it out.
Basically after applying your settings CAB after flashing a new ROM, the first thing I want to do is set up Exchange ActiveSync with my work email so I can get over-the-air synch.
I had previously flashed Kyphur's WM6 ROM, entered my data settings manually, set up my Exchange synch manually, and all was working well for several days.
I ended up flashing Kyphur's ROM again and decided to take advantage of your Cingular Settings CAB to save a little time. Of course, foolishly I did not check out my Exchange synch assuming it would work. I went ahead and installed all my other apps and got the phone back into shape. Next morning (Friday) I noticed I did not have any work emails waiting on the phone - strange.
I then tested the Exchange synch and found it did not work. I was getting an ActiveSync error on the phone about needing a cellular connection to perform the synch (which took me several hours to find).
Bottom line is, no matter what I did with the MEdia Net or My ISP connections , I could not get rid of the ActiveSync error. The only thing I can do is reflash the ROM and enter data settings manually. I have already done this and confirmed it works - I can now synch over-the-air with Exchange again.
Anyway, I just wanted to put this message out there in case anyone else encounters this problem. Hopefully it will save them from the stress and panic I encountered for a while until I figured it out.

wap settings and activesync
I have the same problem. if I install the cingular cabs my active sync gives errors. have to use HTweakC with LVSW to keep data connection always on after manually setting carrier wap settings. but th problem is now my Cingular MediaNET MMS doesn't connect.

Same here, I have tried manual setup and the attached CAB files, both fail to give connection to Cingular MEdiaNet MMS when using LVSW.

kevntrace said:
The only thing I can do is reflash the ROM and enter data settings manually.
Click to expand...
Click to collapse
I do hope you meant to say you were doing a hard reset (versus literally reflashing the ROM) each time you had to start fresh...?

If you are not using exchange server AS then check if you are username and password are entered. Thia was a mentioned problem I listed a few posts back. As far as AS exchange I do not use this since the agency I work for does not allow personal devices sync with theirs. I use POP3 and tested it this way.

WiFi uses GPRS Proxy - Fix without removing Proxy?

I've got GPRS and WiFi working perfectly.
However, everytime I switch between WiFi and GPRS, I got to reentern/remove the proxy server.
My GPRS REQUIRES the use of the proxy, so there's no going around that, and there are no unlimited data plans on the non-proxy access point [face_cry]
I've looked through both HowardForums (where I am from, I've been a Symbian user until now) and here for already existing info.
Aside from finding tons of people who couldnt get the wifi to work because of the proxy, none of those threads gave a solution that included KEEPING the proxy server for GPRS.
If there is a thread with the information to get WiFi to NOT use the GPRS proxy, just link me to the thread and Ill figure out the rest on my own
Thnx! Hope I'll get my post count increased fast so I'm not considered as a post-and-leave user.

of course u can keep the the proxy server for GPRS and surf the internet via wifi ~~
but pity that my device's interface is in chs & my broken english
(if i misunderstand ur thread,dont brick me )
u can fix it ,follow below
start menu--setting---connection--connetion,or u can see my device' captures pic1
(i dont really sure if ur device is that path,i just translated it from chinese to english)
select the icon in green (pic1)
a new window like pic2,just do it
and the key step in pic3:
the two places in red circle
dont select ur wap setting ,select my isp or my network is ok
when u want to connect internet via gprs,u rechange to ur gprs setting
enjoys

oh I understand what you mean. Yes that way I dont have to retype my proxy addresses.
Sadly, it's still not automated from what I see
I'll have to make a shortcut for that section.
Thanks woohyuksheng!

Cingular proxy cabs
Cingular has a set of cab files that enable/disable the proxy settings. if you search this forun you will find then. they are also in the latest cingular rom, black 3.0, and custel 1.3.
if you are not on cingular you could try and edit the cab files with your carrier info.
give it a try.

jcb_home said:
Cingular has a set of cab files that enable/disable the proxy settings. if you search this forun you will find then. they are also in the latest cingular rom, black 3.0, and custel 1.3.
if you are not on cingular you could try and edit the cab files with your carrier info.
give it a try.
Click to expand...
Click to collapse
It didnt work for me. I'll explain below, but first I want to say I found my own fix. (however, it sucks to switch my fix back and forth)
Woohyuksheng's trick didn't do anything either.
My fix for WiFi usage
Thanks JCB Dalek!
All I needed was to add DNS addresses for my Wifi adapter and to EnableAutoDetect=1

Ignore this , I changed everything I said

Proxy data

Hello,
I have a problem with my P3600. I need to use a proxy-setting when I connect to my office network via WiFi. I have the necessary data (i.e. IP address and port number) and it works flawlessly on my old HTC Wizard. However, on my new P3600 the http proxy data keep disappearing each time I leave the settings and connect to the network. The connection is apparently fine but I cannot get any data through.
Regardless how I enter the data, they are gone the next time I check. By the way, it appears that (at least under some circumstances) the SOCKs proxy data are remembered!???
I have tried all combinations of settings I can think of and I am slowly suspecting that something is wrong with the phone. Nevertheless, I've noticed that other people have had similar problems. Unfortunately I've seen no solution yet.
At home, where I use no proxy, everything works fine.
I assume that the P3600 simply "forgets" (doesn't save and doesn't use) the http proxy data and that this is the reason for my problems. But why does that happen? As said, it works well on my old HTC Wizard when I enter the same data in the same places.
This problem is highly annoying, so any help would be highly appreciated.
Fyi, I am using the generic German version HTC P3600 in German language.

Hi,
am I really the only one in here having this problem? Someone here claims, it is a known bug: http://www.mobileplanet.com/ft.aspx?k=99497&page=1
Is it likely that the problem will be solved if I flash a WM6?
Anyway, isn't there a kind of work-around for this problem in WM5/P3600? If people can port and cook a WM6 from another device and do complicated programs etc., I would assume that fixing the proxy-problem with some sort of patch should be relatively easy. But of course, if one doesn't have the problem himself, one doesn't have much motivation to look at it (I am not complaining, but unfortunately I neither have the time nor the skills for solving the problem myself).
V

Same Problem
I <V>
You are not alone, I have exactly the same problem.
I haven't found solution or workaround.
ROM Mary 2.0
Regards

lula6894 said:
I <V>
You are not alone, I have exactly the same problem.
I haven't found solution or workaround.
ROM Mary 2.0
Regards
Click to expand...
Click to collapse
And the same here, with the original HTC asia rom. Not solution found...

A big problem for me
In my company, we use proxy , I can´t use my super P3600 because it don´t remenber the Proxy. Incredible!!
WM5 Spanis version.
There are some one with WM6 that can confirm if it works with that version.?
Thanks

There is a solution -Kinda!
I have found that if there are two networks, ie one for your GPRS and the second for your "My Work Network" then it remembers your proxy settings This is as close as I have got to a solution.
Cheers

The problem has been SOLVED!
Dear all,
As pointed out above, it appears that the Trinity cannot save/use http proxy data as long as there is no other connection defined. I can now confirm that if you define (even a fake) connection to, say, a GPRS provider, the P3600 will remember your proxy data in the WiFi setting. Weird, but it works ;-)
Thank you so much for this hint.
Best regards,
>V<

Found another solution
Hi,
I tried the solution proposed, creating a fake connection, and sometimes it worked, but others no.
I have found what happens: Activesync changes one registry key, the corresponding to the Work connection via http, in my case:
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{EF097F4C-DC4B-4c98-8FF6-AEF805DC0E8E}\HTTP-{18AD9FBD-F716-ACB6-FD8A-1965DB95B814}]
"Type"=dword:00000001
from 1 to 0, and with this value the PDA doesn't read correctly another value:
"Proxy"="my.proxy.server:3128"
although it is correctly informed.
The solution I have implemented is to execute a script (made with SKschema, which I use for another automatisations), that changes this value after a sync has been finished. This is automatically done creating a notification with Memmaid.
Now after the first unsuccessfull sync, the key is updated and it works like a charm.

You DID it!
I could confirmed that by changing the type from 0 to 1 did the trick as mentioned by Rodaldfa! It works immediately after modification! Type=0 means "disable this proxy" and Type=1 means "Http proxy".
However, I don't think it's Activesync which reset this value to 0. I had done various times of AS after setting the Type=1 with regedit, and it always maintain Type=1. But if I enter then exit the comm manager, it resets the Type=0 on exit.
The procedure is to set all proxy info (include passwd...) then exit Comm Manager (CM), then use any regedit to modify the Type value. Then NEVER go back to CM afterward...
Thus, I suggest modify type to 1 then avoid entering CM. AS works just fine for me...
I am using HTC Tytn II (Kaiser) with WM 6.0 in Traditional Chinese.

T-mobile Pro 2 Push Internet

I have been going through the t-mobile version of the touch pro 2 and I have not been able to find the settings for "Push Internet".
I did a quick google and found that the T-mobile EU version has removed it, so I assume that the US version also has the same problem.
Is this a rom upgrade issue or is there a cab that can be installed to override the t-mobile settings on the touchflo 3D 2.1?
Thanks,

tech_e said:
I have been going through the t-mobile version of the touch pro 2 and I have not been able to find the settings for "Push Internet".
I did a quick google and found that the T-mobile EU version has removed it, so I assume that the US version also has the same problem.
Is this a rom upgrade issue or is there a cab that can be installed to override the t-mobile settings on the touchflo 3D 2.1?
Thanks,
Click to expand...
Click to collapse
Unless someone on this forum is really clever, I think that we will have to wait until we can flash to a different rom

skyler17 said:
Unless someone on this forum is really clever, I think that we will have to wait until we can flash to a different rom
Click to expand...
Click to collapse
I was hoping that like many things disabled from the pro 2, a quick registry hack might be possible. Anyone know how?

sorry, removed! but at least the FM radio and extra camera settings are found on this blog!

try in here...
HKCU/Software/HTC/Manila.
among the sub file:
-Internet.SetOperaForeground
-InternetPush.PostFirstRun
-PushMailOn
-DefaultBrowserIsIE
those look like points of interest. try changing the values around on those. i already turned the push mail on. but i havent seen a difference yet. maybe because i havent rebooted. but yeah, ill try those and get back to you..

I maybe too newbie but is it T-Mobile (UK?) settings?
Has the push function been removed from the ROM, or is it T-Mobile settings... I couldn't get MS Exchange to sync with T-Mobile default 3g settings so used these which worked... I don't know if it will help th push internet too... Just trying to help, if it's not relevant then flaming not appreciated!
Under the connections tab, edit existing connections...
ISP Name - T-Mobile GPRS
Name of Connection T-Mobile GPRS
Connection Type - Cellular Line (GPRS, 3G)
Portal - general.t-mobile.uk
Username - user
Password - one2one
The default settings use a proxy server which some applications don't like.

josh_prayyforplagues said:
try in here...
HKCU/Software/HTC/Manila.
among the sub file:
-Internet.SetOperaForeground
-InternetPush.PostFirstRun
-PushMailOn
-DefaultBrowserIsIE
those look like points of interest. try changing the values around on those. i already turned the push mail on. but i havent seen a difference yet. maybe because i havent rebooted. but yeah, ill try those and get back to you..
Click to expand...
Click to collapse
I took a look through the registry, I went through the whole thing. I notice in software/HTC/manila there is the settings for push internet. I messed with some settings and it looks like the push internet is enabled by default but the touchflo program is missing the push internet settings button.
Is there a way to hack the layout links on the TF program through the reg?

I dont think you can access TF settings through the registry. i have seen many settings for it. just a couple here and there. We may need a fix for it in the form of a CAB. i dont see anyone figuring this out through RegEdits. im sure a lot of people have been through it and tried different things, so we may just have to wait for a new ROM?

tech_e said:
I have been going through the t-mobile version of the touch pro 2 and I have not been able to find the settings for "Push Internet".
I did a quick google and found that the T-mobile EU version has removed it, so I assume that the US version also has the same problem.
Is this a rom upgrade issue or is there a cab that can be installed to override the t-mobile settings on the touchflo 3D 2.1?
Thanks,
Click to expand...
Click to collapse
what do you mean 'push internet'??? are you referring to push email?

201reyes said:
what do you mean 'push internet'??? are you referring to push email?
Click to expand...
Click to collapse
Push internet is a new thing in the TP2. It downloads web pages on a schedule so they're ready when you need it. T-mobile took out the feature, presumably to save bandwidth.

Epiktetus said:
Push internet is a new thing in the TP2. It downloads web pages on a schedule so they're ready when you need it. T-mobile took out the feature, presumably to save bandwidth.
Click to expand...
Click to collapse
aahhh!!! didn't know that...thanx

I have been checking through reg again.
I think that in the Hkey_CU/Software/HTC/Manila/ we are missing some of the Keys to push internet. I see that you can setup some of the push internet features but there are no options like the URL, download times, or anything, but just below the same area allows you to configure almost every other auto download service like schedule your stock, and download times, weather, auto-download.
Maybe someone with push internet working can post a pic of the push internet settings from Hkey_CU/Software/HTC/Manila/

There's also bound to be an XML file or additional settings in the existing one (InternetPortal-en-us.xml) and t-mobile might have removed a DLL or two. What we really need is a file-comparison of the two devices as well as a registry comparison.

MMS settings for T-Mobile TP2 without data plan?

Just purchased a TP2 and completed the HardSPL and installed the EnergyROM. However I still can't get the picture messaging to work correctly. My previous phone was a unlocked Sony W810i which I'm able to send and receive MMS messages with no problem. I've tried to duplicate some of the settings from phone to phone but I haven't had good results. I didn't want to spend the extra money for the data plan because the phone has WIFI built in. All I want to do is be able to send and receive MMS messages. Can anyone help? Thanks.......Jason

go back to where you downloaded your rom and look for the mms settings cab and keyboard cab. nrg's energyroms always has a cab for it...

or you can do it yourself its easy
go to connections
select tmo mms
hit edit and change the access point to wap.voicestream.com
leave everything els the same way and save haha its easy
after having to flase a new rom every day(im addicted) you memorize it

Under the T-Mobile MMS I have
Server name: T-Mobile MMS
IP address: 216.155.165.50
Port number:8080
Server address:216.155.174.84/servlets/mms[/url]
Connect via: T-Mobile MMS
Message size limit: 300KB
WAP Version: WAP 2.0
Where do I enter the access point name?
This ROM does have T-mobile setup program but the settings for MMS will not work. I don't why I can't get it to work, I can send MMS on my W810i with no problems.

http://thewingster.com/Documents/MMS Fix (M2.1) (T-Mobile).cab
CLICK HERE AND INSTALL THIS CAB...NEXT TIME SEARCH BEFORE YOU ASK.

akademik_acheeba said:
http://thewingster.com/Documents/MMS Fix (M2.1) (T-Mobile).cab
CLICK HERE AND INSTALL THIS CAB...NEXT TIME SEARCH BEFORE YOU ASK.
Click to expand...
Click to collapse
Thanks, but the CAB still didn't work. I can receive, but I still can't send. Also, I have been searching on multiple forums, so don't just assume that I haven't been looking. I have been searching and trying different settings for 2weeks.

djelwood said:
Thanks, but the CAB still didn't work. I can receive, but I still can't send. Also, I have been searching on multiple forums, so don't just assume that I haven't been looking. I have been searching and trying different settings for 2weeks.
Click to expand...
Click to collapse
ok when you download a rom and have a problem with it, browse that roms forum and look for the bug post. i see you have nrg's energy rom so i went there and found the mms fix...click here....100!!!

akademik_acheeba said:
ok when you download a rom and have a problem with it, browse that roms forum and look for the bug post. i see you have nrg's energy rom so i went there and found the mms fix...click here....100!!!
Click to expand...
Click to collapse
looks like it was sourced to the same .cab file. hmmm did you go into connections and setup mms after the install?

akademik_acheeba said:
looks like it was sourced to the same .cab file. hmmm did you go into connections and setup mms after the install?
Click to expand...
Click to collapse
Yes, I tried setting up the MMS settings after the install. I was having this same problem before I flashed the the NRG ROM. I see that you have T-Mobile, did you have to install the CAB? Do you think I'm having issues becaus I don't have a data plan? I wouldn't think that would be the case because my old unbranded W810i works just fine when sending and receiving MMS. However that phone is not a smart phone. When you are in the connections tab what is the difference between My Work Net Work, and the standard T-mobile Data. Under my work netwok I have no connections set up. However I was reading a thread on a different forum that instructed you to setup a MMS connection under MY WORK NETWORK. I tried that, but it din't work. Also, everytime I try to send an MMS I get a message that says my current data connection will be stopped in order to send the MMS and then you have to select OK, is that normal? Sorry for the paragraph...this is driving me crazy.

did you go to start/settings/connections/connection setup and select your country and operator? that should have done the trick. if that dont do it then this is what you do. since the tmo mms .cab dosent fix it and your connections are set and it still wont work, go to tmobile.com and grab the 6.5 rom upgrade, flash it, soft reset,(this will set all your settings to tmobile network), try to mms and if successful, flash back the NRG rom and use the .cab for mms linked on his rom thread(also get the keyboard fix). it will take you about half an hour. if you dont want to do that then wait and see if someone else has a solution. theres 183 views on this thread and no one stepped in to give advise. i have unlimited everything with tmo and i have no issues with mms. hope you can mms soon...

djelwood said:
Just purchased a TP2 and completed the HardSPL and installed the EnergyROM. However I still can't get the picture messaging to work correctly. My previous phone was a unlocked Sony W810i which I'm able to send and receive MMS messages with no problem. I've tried to duplicate some of the settings from phone to phone but I haven't had good results. I didn't want to spend the extra money for the data plan because the phone has WIFI built in. All I want to do is be able to send and receive MMS messages. Can anyone help? Thanks.......Jason
Click to expand...
Click to collapse
I don't mean to slam you...too badly, but if you don't know how to fix this simple problem, you probably shouldn't be flashing roms. The fix was in the 3rd post, but obviously you haven't used Windows Mobile long enough to know what he was talking about, and you haven't searched for the answer long enough.
So with that said I will walk you through it.
1. Go to the Start Menu, Settings, Connections, and run Connection Setup. Ensure that you have selected United States for country and the operator is T-mobile. Click Ok. Then Yes.
2. Soft Reset
3. Go to the Start Menu, Settings, Connections, and open Connections.
4. Click on the "Advanced" Tab, select Networks, on the pull-down menu select T-Mobile MMS, and click edit.
5. The Radio tab next to T-mobile MMS should be selected, if not click it, then click edit and the bottom of the screen.
6. Click Next on the Name Connection Screen.
7. The next screen should be Access Point Name.
8. Change this to wap.voicestream.com
9. Click Next, on the next screen click finish, and the following click ok.
10. Change the box for "Programs that automatically connect to......." to T-mobile Data and click ok.
11. Soft Reset
I verified these steps as flashed the new version of NRG rom.

diablc said:
I don't mean to slam you...too badly, but if you don't know how to fix this simple problem, you probably shouldn't be flashing roms. The fix was in the 3rd post, but obviously you haven't used Windows Mobile long enough to know what he was talking about, and you haven't searched for the answer long enough.
So with that said I will walk you through it.
1. Go to the Start Menu, Settings, Connections, and run Connection Setup. Ensure that you have selected United States for country and the operator is T-mobile. Click Ok. Then Yes.
2. Soft Reset
3. Go to the Start Menu, Settings, Connections, and open Connections.
4. Click on the "Advanced" Tab, select Networks, on the pull-down menu select T-Mobile MMS, and click edit.
5. The Radio tab next to T-mobile MMS should be selected, if not click it, then click edit and the bottom of the screen.
6. Click Next on the Name Connection Screen.
7. The next screen should be Access Point Name.
8. Change this to wap.voicestream.com
9. Click Next, on the next screen click finish, and the following click ok.
10. Change the box for "Programs that automatically connect to......." to T-mobile Data and click ok.
11. Soft Reset
I verified these steps as flashed the new version of NRG rom.
Click to expand...
Click to collapse
I appreciate your help, and I did try doing this before with 6.1, with 6.5, and with the NRG ROM. Maybe I missed a step or installing the MMS T-mobile cab screwed it up. However I did get it to work this time. Maybe I'm not a WM guru like you, but I'll be enjoying my NRG ROM now. Would you like to make a donation for your help? I know everyone gets tired of answering the same question over and over, however I have honestly been searching different forums and trying different fixes cabs etc.. Once again thanks for everyone's time. Too bad you have to get flamed for asking.

djelwood said:
I appreciate your help, and I did try doing this before with 6.1, with 6.5, and with the NRG ROM. Maybe I missed a step or installing the MMS T-mobile cab screwed it up. However I did get it to work this time. Maybe I'm not a WM guru like you, but I'll be enjoying my NRG ROM now. Would you like to make a donation for your help? I know everyone gets tired of answering the same question over and over, however I have honestly been searching different forums and trying different fixes cabs etc.. Once again thanks for everyone's time. Too bad you have to get flamed for asking.
Click to expand...
Click to collapse
good to hear u all set.u dont have to be a wm guru to know your question. u only have to be a search guru, your question was very elementary.

sorry, wrong thread, please delete