I have many apps working only with NET CF 3.5 installed.
everything was working fine.
today I hard reseted my device to replace the hebrew support (it used to be P.D.A.C hebrew and now it's EYRON)
now nothing works.
tried to install NET frameworks from PC and from .cab - nothing works.
when I open up the "details" list on the ERROR msg. it says a lot about it being a wrong platform and something about globalization.
do you know of a direct connection between frameworks and lang. support ?
any fix ?
or am I wrong ?
Related
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
drehustler said:
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
Click to expand...
Click to collapse
Yeah it sounds like you had CF 3.5 on there before but somehow it didn't stay after the hard reset (which indicates it was installed sometime after the phone was first purchased).
The file you downloaded is to install it from your PC, not the phone. Put the cab file I attached here on your phone, run that, and it should resolve the issue
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
run this from your computer. http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
drehustler said:
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
Click to expand...
Click to collapse
Hmmm no, never heard of it, and basic searching turns up nothing but lists of odd HTTP error codes, that one included. My guess would be an issue with your browser on your PC, but I really couldn't say for sure.
You can also just run the file Rhodium500 linked to above, it's the same .msi file you put on your phone in the first place but couldn't get to run from there...it's an automated installer that just handles everything from your PC instead of you putting the cab on the phone manually.
thanks alot guys, still have no luck and since my phone is under warranty, i'm gonna get a new one. I got 2 htc tilt 2's and only mine is doing this? i'll be back.
dude getting a new touchpro2 wont help... i dont think... like the guy who posted the attachment said, just install it and it should work. if u cant download it use your friend's computer or the library
Dude I had the same problem and if you wait a few mins Ill find it in the microsoft website so you can try downloading from there. Just run it on your computer, then connect your phone with active sync. Go to programs> More> Add/Remove programs and click on the little box there. (I am not sure if the menu goes like this, im actually sure that it doesnt, but for some reason my phone wont connect the WMDM right now so i cant tell u) anyway dont return the phone just because of that cuz the new one might have a problem thats actually harder to fix
I dont remember where I got it from but Ill try to find the original place where I found it.
Heres the file
Microsoft Website
You can download it straight from their website. Its free and it doesnt hurt
thanks, just tried it and had no luck?? i can't even return my phone until the 12th so i'm still trying to figure it out.
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
drehustler said:
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
Click to expand...
Click to collapse
Just a hint; it seems that either resetting the device or ActiveSync seems to solve a lot of problems sometimes. Had the same that my device didn't want to accept new Exchange-settings I made on my PC. After resetting both, it worked flawlessly.
Hi,
I use the 1.66 German ROM from the htc homepage, .NETCF V3.5 is installed and the registry is set to 3.5 instead of .NET 2.0 and there are a lot of applications I found in this forum that cannot be installed.
These are for example:
BsB Tweaks 1.6
Race Chrono
and so on...
Others like Icon changer create error messages (.NET 3.5) during execution ( Icon changer crashes when loading a theme).
Actually I don´t know what to do and where the problem is.
P.S. Maybe one of you guys could state a working download link for .NET 3.5 - maybe my file is a little corrupted???
This not work?
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
When you install it have your HD2 connected via ActiveSync/WMDC and it will ask you to download on your phone as well...
no it doesn't :-(
Hi guys,
recently my HD2 just didn't want to work anymore. Basically it was "on" and plugged via USB to my computer and when I came back by some time, it was completely "off". I tried to activate it but did not succeed to get further then the white screen, whatever I tried.
Result: hard reset.
As I saw that there is an official ROM which was newer than mine I downloaded 1.66er ROM from htc.com.
Everything wet well until I wanted to start Task Fascade. TF tells me: "For this application is a newer version of the Microsoft .NET Compact Framework required" (translated from german to english)
Okay, easy go, I downloaded the 3.5er version of the .NET framework and tried to install the CAB but the installer complains too:"The .NET Compact Framework-Version you are trying to install is already contained in the ROM" (message has also been translated from german to english)
Now I was confused, obviously the 3.5er version is already installed. So I did some search and found (once more) help on this page: forum.xda-developers.com/showthread.php?t=583638
13. Install Compact Net Framework 3.5 to Make Old Apps Work Again
Some apps you may have used on another phone will not work on the Leo unless you install Compact Net Framework to your phone. Download the cab from the following link and install to Device only - not Storage Card and then reset. [...] Also make sure your phone is using the 3.5 as default and not 2.0. Go here: HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5. Also some apps need the file NETCFv35.Messages.EN.wm. Here is the link to download the file: [...] Install the NETCFv35.Messages.EN.wm.cab to device after you installed NETCFv35.wm.armv4i.cab and reset.
Click to expand...
Click to collapse
I did everything I could and double checked the registry entries, rebooted several times but achieved nothing. TF still says the .NET version is too old and the 3.5 installer complains that 3.5 is already installed.
I need some help now
Need help from u guys...
i try to install Net Compact Framework 3.5
in my TouchPro2..
but before the installation finished, there is a pop-up that said error to install..
can somebody help me, any other way to install net cf 3.5..? any tips..? i've already done stopped all applications running, and also make a soft reset but yet, still the same error..
i posted the image below...
Why do u wanna install that? Isn't NetCF 3.5 is preloaded on the ROM?
no.. because i've tried to installed some cabs that requires Net CF 3.5, after install and i want to open the application, there is an error to open.
that's the reason i wanted to installed Net CF 3.5.. :-(
Well did you check if you have any space left on your internal storage? Maybe you filled up your IS accidentally with pictures or videos... If not, I think a hard-rest or re-flash is the only way to go.
well, i forgot to told you that i've already clear my storage to default setting from settings / all settings / system / clear storage.. =D
you tube helped me on installing this app
try this
I was having the same problem on same device. I tried in vain to find a solution online. after poking around my device, i found a file in the root directory - my device - called Microsoft.Net CF.3.5.Log.
I deleted this log file and reinstalled. i think i installed from a cab file copied over to my device.
Matt
hey guys.. thanks to all for postings a good advice..
i'd figured out that there's a microsoft Net CF 3.5
in the root device/windows but i forgot the format for
that file..
i just deleted the file and re-installed Net CF 3.5...
AND IT WORKS..!! successfully installed.. =D
thanx again guys for help..
I installed scyscape on my hd2 mini, the icon is there and when i open it i can see only the contents and the index,but when i open any page it is empty
any ideas??
I have the same problem with a program called UPTODATE 18.2!
isn't it like a problem which we have with computers? I think by having some dll files or installing some programs like flash player or quicktime it would be resolved!
yes i have the same problem with uptodate.
i tryed everything
if u get the answer plz tell me
SOLVED!!
Guys!!
I've just found the solution...
I did a hard reset and then installed the uptodate and found the program works fine! Then I installed another program which adds a keyboard (arabic keyboard) and actually it was a program for adding a new language called multilanguage....
after the installation I saw that the uptodate has the old problem. So I made another hard reset and it works fine by now ;-)
The problem is probably related to such as these applications (programs related to language unicodes and scripts and maybe fonts!)
Wish you make it work and SORRY 4 bad english ;-)
hi here
I have just foundout the solusion yesterday, i made hard reset and reinstalled the uptodate and skyscape and the worked fine, but when I installed that multilang. Support as u said the problem s there again.
Here s the solusion:
After installing the programs for supporting Arabic (3 prog)
-restart the device
-Go to setting that in the bottom bar then press menu-all settings- and click on system
- then click the icon of the multilingual when it s opened check the box beside ”disable multilingual suppor
Restart the HD mini and the uptodate will work ok
I now need a big favor I need the source of the pda of the uptodate 18.2 caz I only have the old one
It ll be great if you can help
lamiaasallam said:
hi here
I have just foundout the solusion yesterday, i made hard reset and reinstalled the uptodate and skyscape and the worked fine, but when I installed that multilang. Support as u said the problem s there again.
Here s the solusion:
After installing the programs for supporting Arabic (3 prog)
-restart the device
-Go to setting that in the bottom bar then press menu-all settings- and click on system
- then click the icon of the multilingual when it s opened check the box beside ”disable multilingual suppor
Restart the HD mini and the uptodate will work ok
I now need a big favor I need the source of the pda of the uptodate 18.2 caz I only have the old one
It ll be great if you can help
Click to expand...
Click to collapse
I don't know if arabic is working after disabling the multilanguage or not , please let me know!
and for having the source click on these links:
I've downloaded it form these links:
http://www.midupload.com/7zcokbkiw5n3/UpToDate.18.2.part1.rar
http://www.midupload.com/9ly9vmqxw9sd/UpToDate.18.2.part2.rar
http://www.midupload.com/tesu0ru7eg8s/UpToDate.18.2.part3.rar
http://www.midupload.com/vwvsrmza615u/UpToDate.18.2.part4.rar
http://www.midupload.com/v1mhzljs6y5b/UpToDate.18.2.part5.rar
http://www.midupload.com/87x3pbdila9a/UpToDate.18.2.part6.rar
http://www.midupload.com/b9ggtnavvuki/UpToDate.18.2.part7.rar
yes arabic still work fine and still write arabic as well