Database Users

framework errors on a stock HTC Touch HD rom ?

Hi there,
Has anyone got the same errors like when you try to start TrackMe or other Compact .Net framework based applications ?
It says something like Method missing... No better luck if I reinstall the Framework
Error message is (translated from the french):
file or assembly called "System.Data.SqlServerCE, version=3.5.0.0, Culture = neutral" is missing

I have the same, any solution out there ?

Make sure you install SQLce too
(in the meantime, I switched from blackstone to a G1)

BsB tweaks and Framework 3.5

Does anyone have simple instructions on how to install Compact Framework 3.5 on Leo? I need it for BsB Tweaks.

Gargamel29 said:
Does anyone have simple instructions on how to install Compact Framework 3.5 on Leo? I need it for BsB Tweaks.
Click to expand...
Click to collapse
Download it from the microsoft website..
connect your phone to the PC via active sync..
Double click the file on your PC.. it will install it on the PC an dthen simultaneously on the Phone.. follow the instructions shown on the phone..

This worked for me:
http://pocketnow.com/how-to/tutorial-how-to-upgrade-to-microsoft-net-compact-framework-35

13. Install Compact Net Framework 3.5 to Make Old Apps Work Again
Some apps you may have used on another phone will not work on the Leo unless you install Compact Net Framework to your phone. Download the cab from the following link and install to Device only - not Storage Card and then reset. http://justpctech.com/PPC/NETCFv35.wm.armv4i.cab Also make sure your phone is using the 3.5 as default and not 2.0. Go here: HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5. Also some apps need the file NETCFv35.Messages.EN.wm. Here is the link to download the file: http://www.mediafire.com/?ommgm3gz13z Install the NETCFv35.Messages.EN.wm.cab to device after you installed NETCFv35.wm.armv4i.cab and reset./QUOTE]
thats a quote from this thread : http://forum.xda-developers.com/showthread.php?t=583638
Click to expand...
Click to collapse

Thanks for this. I used the 2 .CAB files which I obtained from the modaco site (still haven't installed a registry editor - my bad).
It worked without issue (apart from when I needed to figure out how to soft reset my HD2!).
I've got BSB tweaks working now.

I previously only installed 1 of these cabs, but i guess there no harm installing both if they serve different purposes.

Problems installing Net Framework
Hi Guys. I've got myself into a bit of a problem here. I downloaded an app. When I came to run it, it crashed saying I needed to install net framwork. OK, so no problem as I thought I had it installed already. I checked my installed programs and I could see it was already installed.
So, I uninstalled the app it and tried to reinstal the cab version of Net Framework. But, as soon as it starts the installation process, I get an error message saying that it's already installed in ROM. I rebooted the device thinking that would sort it, but it didn't,
Worst of all, now a load of other programs don't work because they can't find net framework 3.5
Ooo errr - anyone got any suggestions?
Thanks
Steve

check the registry and follow above directions, make sure it's pointing to 3.5 if already installed and not 2.0

net Framework
Hiya
Thanks for replying. Yes, I did follow the above instructions and yes, I have made sure that the registry is pointing to the correct version before I posted my query.
Any other thoughts
Steve

HELP Netcf 3.5 Installation failed

Hello,
i have a massive problem with my htc hd2. In order to use bsb tweaks 1.6 and other software i need netcf 3.5. The problem ist, that every time i try to install netcf3.5 wether via .cab or active sync using the pc programm it says "installation failed". When i install BSB Tewaks it installs and says that it can´t run with that version of netcf. Obviuously there seems to be an older version installed which hinders the new one from installing. This problem occurs even after rom update and hard reset. I ran out of idears and am totally despaired.
If someone can help me with that i´d be more than thankfull because i tryied everythin from sk tools cleaning registry after rom installation to taking out the memory card and Sim card and so on..
HELP PLEASE (

Lovrock said:
Hello,
i have a massive problem with my htc hd2. In order to use bsb tweaks 1.6 and other software i need netcf 3.5. The problem ist, that every time i try to install netcf3.5 wether via .cab or active sync using the pc programm it says "installation failed". When i install BSB Tewaks it installs and says that it can´t run with that version of netcf. Obviuously there seems to be an older version installed which hinders the new one from installing. This problem occurs even after rom update and hard reset. I ran out of idears and am totally despaired.
If someone can help me with that i´d be more than thankfull because i tryied everythin from sk tools cleaning registry after rom installation to taking out the memory card and Sim card and so on..
HELP PLEASE (
Click to expand...
Click to collapse
you have to use a reg editor to enable the 3.5. HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
see if this helps

**** turpin said:
you have to use a reg editor to enable the 3.5. HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5.
see if this helps
Click to expand...
Click to collapse
That is for software that was installed on the phone prior to .Net 3.5. It has nothing to do with installing 3.5.
If you can bare it, I'd suggest a hard reset and then try to install it. It should install without issue, as it has for everyone else as I've never seen this problem.
There could be a conflict with something that you've already installed on the phone, but it certainly won't be with an earlier version of .Net. You can (and indeed need to) have different versions of .Net working on the phone.
Let us know how you get on.

johncmolyneux said:
That is for software that was installed on the phone prior to .Net 3.5. It has nothing to do with installing 3.5.
If you can bare it, I'd suggest a hard reset and then try to install it. It should install without issue, as it has for everyone else as I've never seen this problem.
There could be a conflict with something that you've already installed on the phone, but it certainly won't be with an earlier version of .Net. You can (and indeed need to) have different versions of .Net working on the phone.
Let us know how you get on.
Click to expand...
Click to collapse
I performed a hardreset first via Software "1234" then via buttons (volup/down) but every time i try to install it, it says "Microsoft.NET CE 3.5CAB failed" and thats it....
What can i do ? It actually has worked at a certain point but after some hardresets it just doesnt install anymore (

Have you tried a different download? It may be that the installation you downloaded is corrupted. Also, if you're copying it to your SD card and installing from there, that could be damaged, so try it from the device.
Other than that, I really don't know what to suggest. I take it you've googled the error message you get. What did that give you?

Netcf3.5.9198
When I tried to install NETCF3.5 it told me I had a newer version already installed, so I didn't install it. Later I checked my registry and found that I have version 3.5.9198 installed. Does anyone know if BsB Tweaks will work with this version? (EDIT) Well, I tried BSB Tweaks and it seems to work ok with my version of NETCF3.5.
When I tried pinch to zoom on Opera 10, it worked, but also gave a small popup showing the image of the full screen centered on the lower center part of the screen. When ever you double tap to go back to full screen, the little popup disappears. ????

Problem with .NET CF 3.5 contained in ROM

Hi guys,
recently my HD2 just didn't want to work anymore. Basically it was "on" and plugged via USB to my computer and when I came back by some time, it was completely "off". I tried to activate it but did not succeed to get further then the white screen, whatever I tried.
Result: hard reset.
As I saw that there is an official ROM which was newer than mine I downloaded 1.66er ROM from htc.com.
Everything wet well until I wanted to start Task Fascade. TF tells me: "For this application is a newer version of the Microsoft .NET Compact Framework required" (translated from german to english)
Okay, easy go, I downloaded the 3.5er version of the .NET framework and tried to install the CAB but the installer complains too:"The .NET Compact Framework-Version you are trying to install is already contained in the ROM" (message has also been translated from german to english)
Now I was confused, obviously the 3.5er version is already installed. So I did some search and found (once more) help on this page: forum.xda-developers.com/showthread.php?t=583638
13. Install Compact Net Framework 3.5 to Make Old Apps Work Again
Some apps you may have used on another phone will not work on the Leo unless you install Compact Net Framework to your phone. Download the cab from the following link and install to Device only - not Storage Card and then reset. [...] Also make sure your phone is using the 3.5 as default and not 2.0. Go here: HKLM/Software/Microsoft/.NETCompactFramework. Change the DWORD data of entry 2.0.7045.00 from 1 to 0. Next Change the DWORD data of entry 3.5.7283.00 from 0 to 1 and then reset. This disables 2.0 and enables 3.5. Also some apps need the file NETCFv35.Messages.EN.wm. Here is the link to download the file: [...] Install the NETCFv35.Messages.EN.wm.cab to device after you installed NETCFv35.wm.armv4i.cab and reset.
Click to expand...
Click to collapse
I did everything I could and double checked the registry entries, rebooted several times but achieved nothing. TF still says the .NET version is too old and the 3.5 installer complains that 3.5 is already installed.
I need some help now

[Q] Webbrowser security settings error

Hi,
recently I have changed three ROM on my Blackstone (all with wm6.5) and I always had this problem: when I try to use my app (Supergames mobile) and tap on one game I see two alert with the same message:
"Some content cannot be displayed due to the Pocket PC security settings."
and no game will be open.
I tried to remove code related to flash and javascript from my app and no alert wil be show (obviously no game start) so I think that there will be a security settings that blocks flash and javascript on CF.net webbrowser control.
Can you help me to find and modify that security settings?
Thank you!
PS: I have developed my app on HTC Blackstone (with WM6.1 original ROM) and tested it on some other device and emulator (WM6.1 and WM6.5) with no problem (until now...).

perhaps this helps you

malatest said:
perhaps this helps you
Click to expand...
Click to collapse
Thank you malatest for your answer but I have the same messages also after install your Cab (I've also tried a soft reset after installation)
I have made some test with my app to localize where is the problem and I think that the problem is related to .NET Compact Framework within the ROMs I have flashed on my Blackstone.
The CF version installed on these ROMs (v3.5.9198.0) is the same I have used for develop my app and test on my device and emulator (WM6.1 and WM6.5) but if I try a simple app with only one method call such, for example, "webbrowser.navigate" it don't fires (while obviously it fires on emulator and other ROM with CF installed out of ROM).
I tried to reinstall without success because I get the message that the version is already installed so as I have not found information on how remove CF cooked within a ROM, I have made a new version of my app for CF 2.0 sp2 (v2.0.7045.0) and with NetCFCfg I have imposed the application to start with it: security messages no longer occur!
At this point someone has any idea what could be the problem with cooked Compact Framework? (or how to reinstall them?)