Database Users

Help! My S100 doesn't wake up when cold?

Hello everibody,
I have an annoying problem: my Qtek sometimes prevents waking up! And only a soft reset can power it on!!!
But the crappiest thing, is that the device doesn't power on when it's cold! I have tested it!!! :shock:
PLZ HELP
It's an hardware prob? It's better to send it to repair? Thx
Oh, another thing :twisted: when the device is power off (and I can't power it on) the green led is still acting like normal, it even stops when no coverage is present. If I try to call to the S100, it rings but I can't do nothing? :?
Great forum, anyway. I have solved nearly ALL of my Qtek probs.

I will add these infos:
ROM: 1.06.04 ITA
RADIO: 1.05.00
Note: I have already tried with an Hard Reset. Nothing resolved. The device simply won't power up when it's below 20° C. And I don't know why.

Your Magician seems to be a candidate for the repair shop of for an exchange. Never heard about a problem like yours
Cheers

Uff... Nobody (except me) have this prob? Can someone try this? Before sending it to repairing, I would figure this s**t out! And maybe find a valid solution...
AND: How can I do the BigStorage trick on my ITA ROM? I know how, but with the other languages... Don't want a foreign ROM only for 20+MB...
I think upgrading the ROM can't change anything, if it's an hardware problem... I want an active device in this winter, cannot reset it all the time!

Possible Solution?
Yet nobody seems to have my prob. But before sending my S100 to the pocket pc heaven, I will explain a possible scenario. I've read that cold can reduce the battery charge dramatically. So what I am thinking:
1) The unit is absolutely normal when warm.
2) When the unit is cold, is STILL normal.
3) When I shut down the unit, the LED is STILL blinking.
4) But then -what the hell- it seems CAN'T turn it to the active status.
5) The only thing that I can do is to RESET the unit. Then when I control the battery status is ALL ok: same level as before. But there isn't the missed calls of who have called me when the unit is in this state!
I think that the low temperature affects the internal battery, reducing it to zero. When the S100 is on this effect couldn't be noticed, because the external battery constantly charges the the internal one. But the charge is not provided when in standby. And so the charge in the internal battery drains... making impossible to turn on the device! But when resetting, the external battery is give power to the internal one, and the device is now fully functional as before.
According to this mess, then I only need to replace the internal battery with anything better, and the device MUST work EVEN if cold...
Now I would like to listen to others, just to convalidate this theory...
Otherwise, the device will make a good and comfortable travel to the repairing center, hoping they will send me a completely new one ( I have accidentally scrachted it one time. And another.)
Hope that you will understand my Huff-Puff post. Hope that someone will see this post.
Cheers,
MocciJ

Yet no replies...
This damn thing has taked too time, and so I'm sending the device to the centre tomorrow...
I've tried to upgrade my old qtek rom to the 1.11 of the I-mate: nothing resolved...
Is it ok to send a device with an imate rom to a qtek centre? Lemme know...

my friend has same problem, I flash radio whit 1.13, 1.12 (rom is 1.12)
I shell open it ....

Click here to read of a similar problem
As far as sending your phone back, which judging by your signature you already have, you need an official rom to be installed if you want it covered by warranty. Not sure on Qtek's policies. Have you sent it yet? What did they say about your Jam rom?

Don't try to make the same thing I did. When try to changing to ANOTHER Rom Manufacturer to see if the problem vanish, remember (at least before sending it) to PUT THE ORIGINAL ROM IN IT!
THEY (AT REPAIRING CENTER) WILL SAY THAT THE SOFT IS CORRUPTED!
This way I avoided my warranty. Hope this info will help.
I'm deciding what to make now. Do I have to pay for this prob, or do I cover my qtek with warm clothes?
Or better find a solution?
If anyone has suggestions, I'm glad to listen. I want my pda back (it stayed out for a month, I miss it!).
Do not make hazardous moves with ur pda when it's in warranty. Or U will pay that the double it's price!

Don't try to make the same thing I did. When try to changing to ANOTHER Rom Manufacturer to see if the problem vanish, remember (at least before sending it) to PUT THE ORIGINAL ROM IN IT!
THEY (AT REPAIRING CENTER) WILL SAY THAT THE SOFT IS CORRUPTED!
This way I avoided my warranty. Hope this info will help.
I'm deciding what to make now. Do I have to pay for this prob, or do I cover my qtek with warm clothes?
Or better find a solution?
If anyone has suggestions, I'm glad to listen. I want my pda back (it stayed out for a month, I miss it!).
Do not make hazardous moves with ur pda when it's in warranty. Or U will pay that the double it's price!

Is there any way you can take it to another repair shop? If I had your problem, ie turning it in with a wrong ROM and being rejected, I would just reflash and drive to another city to have it fixed. They would never know the difference.
If that isn't an option in your country, I guess you will have to pay for the repair, even though it is very unfair, because a 'wrong' ROM can't be the cause of this problem

Thx for this suggestion. Currently I have an Qtek rom perfectly working. But they delivered my Qtek to French for repairing (and I am from Italy), guessing that I haven't that option.
The only thing that I can do to riesumate my warranty is to declare that that rom is OK, downloaded from an official site. The cause is that when the Qtek hasn't made upgraded roms, the imate did. In case, I will say that the problem was there EVEN before the upgrade (it did).
There is currently NO SOLUTION to this problem (it's an hardware problem, and should be repaired by the repairing center -of course-)
-----
I will report what the World Startel Communication (the repairing center) has said (transcribed from italian to english):
1)The product is in delivering phase.
2)The product resulted to be irreparable. It will delivered back.
3)The repairing service has resulted to be out of warranty. We are waiting the consumer to pay the reparation (They said they sent me the price. Currently they seemed to haven't sent nothing).
4)The product has come to our labs.
5)The requested reparation is inserted in our knowledge system.
And that is. The Qtek has delivered, considered irreparable, and when out of warranty is ok for repairing? That's something odd... Considering that I've retrieved how to reach the tracking service only by calling the operator... Now that the S100 is in their labs, they say that the prob is in their knowledge system, which I ignore what it means. Now I suppose that the product reached French before checking the warranty, and this would be to pay something around 10-20€, IF I decide to not repairing the unit...
Ok, that's all. Hoping that this winter isn't getting cold.
Cheers,
MocciJ

Ok, the S100 is in repairing again. They will send me repaired with a price of 50€.
Hope that they will explain me what happened. Otherwise, sending it seems to be the only solution avaible.
They will raise up my warranty, almost that's what I've heard.
So this can be the end of the topic...
Cheers,
MocciJ

They are sending it back, but non-repaired. No cost, but nor warranty at all. They SIMPLY deleted my warranty taking it for 2 months.
Now, what's the real mess with the warranty? Oh yes, the ROM was changed from Qtek to an Imate one, official. They find out that there's a mix between these 2 software, and that they CAN'T upgrade or downgrade it at well: is this possible? Incredible!
They "sincerely" said that changing ROM required a new motherboard, which cost the godness of 200+€... Exactly half the original S100 cost!
QTEK CUSTOMER SERVICE SUCKS! LONG TIME WAITING! NONE REGARDING OF THE CUSTOMER!
Now that my S100 is out from it's warranty, we'll return on how to resolve this TINY, LITTLE prob...
Do we have to cover our Magician with warm clothes? Just let me know your ideas...
Best Regards,
MocciJ

Screen alignment problem with t-mobile

hi everyone today i have noticed screen alignment problem with my t-mob mda vario 2 , it has serial number HT632xxxxxxxxxxx . it has been almost a week since i ve got it and this is the first time i have noticed it. The only difference since last night is 2 app i have installed. one is ae button plus and other one is pocket music. now i have removed them and tsting it again. will post further.
is there any one having smilar issues?

welcome to the club....
I Just hard reset mine, did not load EXT ROMs and I'm on my 3rd day now...
I justr have my pims...
let us know your experience....

since ihave removed aebutton plus it seems fine but you know once you have seen such thing you get bit suspicious about everything.
I have also emiled developer of aeb but not sure if he will reply.
and I have also asked tmobile what would be the solution. they don't recognize screen alignmet issue as a fault yet and advised me not to belive everything on the net :S
they also won't replace device but refer me to htc. I don't know if another support guy would tell different but since I ve still got some time until free to cancel period over, if I get same problem again I will cancel my contract and stick with old wizard some time

change it.
i go back to my seller (before 15 days) dans i change it, now ht630xxx and no probleme

i have cancelled my contract with t-mobile. gprs connection was crap here

nolovelust said:
they also won't replace device but refer me to htc.
Click to expand...
Click to collapse
That is illegal under the 2000 amendment to the Sales of Goods and Services Act 1982. Anything that fails within the first six months after sale will be deemed to have failed at the point of sale and you have the choice of repair, replacement or refund.

but problem is, fault is very hard to demostrate. it reminded me my sony digital camera, power button wasn't responding time to time and randomly, i have sent it to sony explained whats happening. after a week i ve got reply. they were explaining how to operate cameras power button!!!
another example is today before i have cancelled my contract i was asking customer care why its almost pain to connect to internet in my area . after sendin trace and ping results via email response i ve got was:
I have received your e-mail as re your issues I have looked in to this as the software is not supported by t-mobile you would need to contact Microsoft for further support
Thanks
Click to expand...
Click to collapse

nolovelust said:
but problem is, fault is very hard to demostrate. it reminded me my sony digital camera, power button wasn't responding time to time and randomly, i have sent it to sony explained whats happening. after a week i ve got reply. they were explaining how to operate cameras power button!!!
another example is today before i have cancelled my contract i was asking customer care why its almost pain to connect to internet in my area . after sendin trace and ping results via email response i ve got was:
I have received your e-mail as re your issues I have looked in to this as the software is not supported by t-mobile you would need to contact Microsoft for further support
Thanks
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I think that if you look in the warranty you will find that this is incorrect. If you speak to HTC and give them the IMEI, they will be able to assist you further.

I just loaded everything on my unit... and it's back to once a day misalignmnet ...!!
It could be the digitizer driver is being allocated to unstable segment of the memory. A dopod HK technician tried to replaced the digitizer and it's no use. He is waiting for the official ROM release for HK dopod 838Pro. It is still on hold here in HK.
He even mentioned that replacing the digitizer with a less responsive one (cheaper as he said) FIXES this issue. But it would be also costly for Dopod to replaced the hundreds released in Singapore. But waiting for a fix from HTC also costing them !!!
Well, it's purely marketing !!!

Hero problem - button backlite is gone, and headphone detection system also

I saw on few websites people complained about this issue. Well some of them at least.
Does anyone has a slightest idea if this is a hardware or software issue?
I tried hard restarting the phone - nothing happens.
When i insert the headphones, nothinghappens. I installed that toggleheadset program, and all it does it enables me to hear sound through headset, but when i try skipping the song from the headset button, it does nothing.
Also, trackball backlight and button lights are out.
Its a 2 days old phone, i dont like the facts that i will give them a 2 days old phone to repair and then get it back. I bought the new phone...
Anyone has an idea? Is there any chance that this new software patch will fix this?
thanks in advance

well, first of all, report the problem to HTC....most people seem to complain on forums, but not to HTC, so it leaves an impression of a problem affecting only a few people, when it's not :/
second, i can only quote what they answered me:
We have received very, very few queries regarding the issue you are facing, so I thank you for taking the time in reporting it to us.
For the above reason, I can not confirm if a software fix is on its way, and indeed if HTC will play a part in this release. I have taken the liberty of passing this issue on to our developers for their consideration.

Thanks for your answer.
Actually i did contact HTC, out of the same reason you stated here. and here is what ive got:
Dear valued HTC customer,
Thank you for contacting our Customer Support Center. We are dedicated to providing you with the best quality service and answering all of your questions and concerns.
We would recommend you to hard reset your device. If this does not help please contact us in order to book your phone into repair .
If the above steps do not resolve your issue, we invite you to visit the support area on our Web site. Please go to: http://www.htc.com/www/support.aspx
i would just like to know if its a software or hardware issue.. but seems to me that its hardware.. not sure though..

i think it's software, otherwise that Toggle wouldn't do anything, what i don't get is why hard resets don't help....thought maybe there was something on the original SD card and formatting/changing it maybe lost us something important, but that seems unlikely :/

Mine got sent back to HTC over a week ago apparently they are INVESTIGATING!
why this stops T Mobile from giving me a replacement is a *&^&**^%$ mystery to me !
will bell them this week ....................ON MY OLD VIEWTY .......to get an update

I did sent mine back to the reseller here in Netherlands. Within two days I got a brand new one.
Everything seems to be working allright but the issue appeared three days after I turned it on so now is my second day. Fingers crossed tomorrow.......
Good luck. I think HTC received a lot complaints about this issue last week. I heard my reseller said they had three broken Hero's last week.

Its a hardware fault with a board that connects to the main PCB. Send it back for a refund/replacement. You shouldnt have to go the waranty route since it was obviously faulty when you got it. Even if it happened after 2 days, 2 weeks, 2 months or 6 months, it should not fail that quickly. The law is on your side.
I'm pretty sure HTC know about this problem since its all over the net now!

Touchpanel has died!

Hi!
I was sitting down and cleaning my display with a fiberclouth that was in the case with the screenprotector. I was not using any hard preassure or anything.
When I was finish cleaning the touch function don`t work anymore! It does not respond to any touch, but hardware keys work perfect.
I have tryed hard reset also.
The mobile works great when I am using it trough MyMobiler with my computer.
Anybody who has experience somthing simular?
Hope the I can return it. It is under 2 months old!

Well contact HTC directly, just say your Touch screen doesn't response anymore and they should help you! I hope all goes well GL.

I had the same problem. I contacted HTC and they gave me the address of the local service center. The techician replaced the screen and the repair cost was covered by the warranty.

panart said:
I had the same problem. I contacted HTC and they gave me the address of the local service center. The techician replaced the screen and the repair cost was covered by the warranty.
Click to expand...
Click to collapse
Ok!
I have sent my device to my local service center now!
Hope they will fix it fast! How long time did you wait, and do you know what exactly they fixed?

I waited 3 days. They replaced 3 parts: SUB-ASSY, LCM, LEO.
I asked them what those parts are and they said it's complete LCD with touch panel.

Hey, yesterday i got the same problem.
Seems to be that there is an hardware-error?
I send my phone back today to get a new one, or, to get the repaired one. (last would be nice because i forgot to backup my contacts )

specialdune said:
I send my phone back today to get a new one, or, to get the repaired one. (last would be nice because i forgot to backup my contacts )
Click to expand...
Click to collapse
Sorry to tell you this, but even if it is the same phone, they're 99% sure to do a factory reset before sending it back.

Finally I got my phone back!
They have replaced the LCD, touchpanel and some small parts.
It took a while, but I bought the Nexus one after I sent my HD2 in. Funny to test it, but when I recived my HD2 yesterday, I remembered why this is my primary phone! =)
I just love the LEO!!!!
Let`s hope that this problem I and a couple of others have had is not a common hardwear problem!

NONONONONO!!
When I tryed to take a picture now, the blitz don`t work.
It is the first time since I recived it from the repair I tryed the cam, so it must have happend there!
Anybody know if it can be a softwear problem?
Hate to send the phone to repair again! The are using so much time here in Norway!!!

akilles_ said:
NONONONONO!!
When I tryed to take a picture now, the blitz don`t work.
It is the first time since I recived it from the repair I tryed the cam, so it must have happend there!
Anybody know if it can be a softwear problem?
Hate to send the phone to repair again! The are using so much time here in Norway!!!
Click to expand...
Click to collapse
the flashlight doesn't work when the battery is low. after a full charge, try it again.

I have a full battery! =(
Maby I have found out something!
I downloaded a app from opnmarked, htorch is the name.
When I try opening it, I recive a error that says: Error finding the DLL or the "camera_Init" entry point: Can`t find PInvoke-DLLen HTCCamera1.dll
Anybody knows something that can help?

Earphone is dead - please help me

This morning I just got THE bad surprise. I could not hear anything from the HD2 earpiece (I mean the earphone in the front upper part of the HD2) If I enable speakerphone it works fine, if I attach an external earphone or even a bluetooth earphone it also work fine, microphone also works fine, the only problem is with the front earpiece that I can't hear anything.
I hope this is some kind of bug or anything I can deal with because sending for warranty is not a good option for me.
Anyone have any hint to give to me?
Thank you a lot in advance.

Just to add I already tried to flash a new Radio ROM and a cooked ROM, nothing solved my problem.
I am still hoping for some help here ;(

flashing a new rom shouldn't really be needed as a normal hard reset should have solved it, if that was a simply software glitch.
If the ear speaker is still dead... it's just dead.
Even if it comes to life again, I wouldn't be so okay with it because it may stop working again.
I understand how sending it back is troublesome, yet you cannot really do anything more, I had my old ipaq 214 which became mute twice on two different warranty exchanged devices, but at least it was not a phone.

I also tried the hard reset. Hooo this is a nightmare! I can't even use the warranty because sending to USA is not a good option at all.

felcas said:
I also tried the hard reset. Hooo this is a nightmare! I can't even use the warranty because sending to USA is not a good option at all.
Click to expand...
Click to collapse
Have you not got an old phone as a backup? i keep my old phones for a few months after getting a new one "just in case" but i do agree it's going to need to be repaired at least.

M3PH said:
Have you not got an old phone as a backup? i keep my old phones for a few months after getting a new one "just in case" but i do agree it's going to need to be repaired at least.
Click to expand...
Click to collapse
A backup phone is not the problem. You may not understand my problem because you live in a country that is very easy to have access to the latest technology, but unfortunatelly here in Brasil it is both dificult and expensive. When we buy something from oversea we hope/expect that we never need to use the warranty because if we do we don't have, only a few corporates does honor the warranty oversea in case their product has been bought oversea and HTC is not the case, so they ask me to send to USA to fix it, the first problem with that is the shipping price that is over U$150, the second problem is the import/export regulations on my country that will tax it 100% when it come back from US and the last problem is that HTC does not ship to Brasil and I have no one there to bring it to me here in Brasil, so warranty is out of question for me.
So basically I am over frustrated to had spent over U$800 to get this device and it is not working properly.
Understand now?

You can use a bluetooth dongle as a workaround.