Hello.
To overcome this situation, activate in Start -> Settings -> (7) -> (1) -> (7) -> (2) -> (5) -> Energy Saving, change it to Better Performance..
It boosted my wlan reception and now can connect always at first try.. didn't noticed additional battery drain tho...
Regards, Ricardo.
Hello,
I'm having this same problem but I have the Verizon version (ozone). My menus are different than yours and I wind up in the USB tethering settings when I follow your instructions.
If it's not too much trouble, can you write out the menu names to get to the wifi settings? I've looked in my menus and can't find them anywhere.
Thanks.
computerpro3 said:
Hello,
I'm having this same problem but I have the Verizon version (ozone). My menus are different than yours and I wind up in the USB tethering settings when I follow your instructions.
If it's not too much trouble, can you write out the menu names to get to the wifi settings? I've looked in my menus and can't find them anywhere.
Thanks.
Click to expand...
Click to collapse
open com manager (fn-space), go press the settings button, WLAN settings, power mode.
Thanks; i appreciate it.
Related
Who knows how to disable the 3G, so the phone will work only in 2G?
amitbsh said:
Who knows how to disable the 3G, so the phone will work only in 2G?
Click to expand...
Click to collapse
Download and install Advanced Configuration.
Click Menu then select More Settings and then select Comm Manager.
Here you can select what items you want in the comm manager.
AllTheWay said:
Download and install Advanced Configuration.
Click Menu then select More Settings and then select Comm Manager.
Here you can select what items you want in the comm manager.
Click to expand...
Click to collapse
Unfortunatley this comm manager tab does nothing on my HD (also reported by other useres).....used to work fine on Diamond etc.
Anyway, the obvious but long way round would be (translated from German ROM): Start>Settings>Phone>Band>GSM
michi123 said:
Unfortunatley this comm manager tab does nothing on my HD (also reported by other useres).....used to work fine on Diamond etc.
Anyway, the obvious but long way round would be (translated from German ROM): Start>Settings>Phone>Band>GSM
Click to expand...
Click to collapse
I have the same problem. Any solution?
I get exactly the same problem. After searching maaaaaaany topics and forums it seems that band selection (3g-gsm switch) is managed by bandsel.exe or adminsettings.exe (in windows repertory). On HD you have neither of these. So on HD band selection is managed by another exe ... if someone can figure out witch exe it is, it should be quite easy to patch registry, in order to call this exe in comm manager.
hope you understood (I'm not very comfortable with english).
I have also tried to turn off 3G in the comm manager with no success. I like to turn it off most of the time as it saves battery when not having to search for a 3G signal. Has anyone found a way to disable 3G access on the HD, but leave GRPS enabled?
Try this Start -> Settings -> Phone -> Band -> choose GSM in the upper dropdown menu leave the other on auto.
With this setting you will have gsm and gprs/edge available but no 3G
Hello,
I've a problem with the Comm Manager. The problem is that i can't enable or disable the WLAN feature, it appears on "gray" color, so i can't select it. It seems like it that option was not available.
At least I can enable/disable the WIFI from the System -> Settings , wireless LAN configuration, but i would like to enable/disable it from the Comm Manager, like i have done before.
I tried to uninstall all applications since the last time it worked, but ... no results.
If someone has a idea about what i should do to repair this, please help me.
Here is a image with my problem.
http://img518.imageshack.us/img518/5276/c1copysn9.png
As you can see, the WLAN option can not be selected.
Thanks and excuse my bad English.
Are these pictures from you or is it just an example? As these screenshots show activesync connection which will automatically disable wi-fi so what we can see there is perfectly allright...
Dair said:
Are these pictures from you or is it just an example? As these screenshots show activesync connection which will automatically disable wi-fi so what we can see there is perfectly allright...
Click to expand...
Click to collapse
The pictures are an example, but are just the same i see on my device screen.
So I don't understand, if ActiveSync is running I can't enable WLAN from the Comm Manager window, but i can enable it from the Wireless LAN Settings window. Is that right??
Thank you.
You can enable it, but it will immediately switch off. This is how it works on my device. If you want to use it, you must enable it on computer in AS/WMDC. But I don't see any advantage of it, because you already have internet via AS from computer.
Thank you both,
I will start to reinstall all the uninstalled programs.
if ActiveSync is running I can't enable WLAN from the Comm Manager window!
good! I SEE!
hello community!
i'm new here, but the search didnt help.
is it possible to turn off the messages about visible wlan networks?
thanks for your help!
Already tried going to the settings tab, tapping 'Menu', then 'All settings', going to 'Sounds & Notifications', then to the tab 'Notifications' and uncheck the options at the Event 'Wireless network detected'?
thanks for the fast help!
i've never been in there and it was already disabled.
i will test it, maybe one of the cabs i recently installed turned the notification off (i installed new task bar icons).
unfortunatly this did not solve the problem.
so far i did the following:
- turned the option you mentioned on and off again
- soft reset
- found another setting under: settings -> more -> connections -> WLAN -> wireless networks -> menu -> extended -> uncheck "messages on availability" (it was already unchecked).
sorry, all this is translated from the german UI, hope you get the idea what i mean. and this setting didnt help either...
any other ideas?
(just to clarify, i want to turn off the notifications i get in the task bar)
thanks all for your help!
edit: i am running std. rom, all htc updates, 3d drivers from here, new task bar icons
shameless bump. i know it's only a minor issue compared to others.
but does anyone have an idea how to get rid of those?
thanks guys!
First off, i have spent several hours looking through this forum and cannot find an answer.
I turned off sense yesterday through the home/today settings in the settings menu so i could just see what the base os looked like and now i cannot access the settings menu, or turn sense back on. Also there is no link in my start menu for settings. Not in the tools, or app folder.
Please forgive me if this is a wasteful post i didnt know where else to ask.
Thanks
Enable it through BSB Tweaks.
start button > settings > home > check sense
He said he couldn't access the settings menu in the start menu because it would redirect to the sense one which was disabled. . .BSB Tweaks can enable the regular settings menu so he can enable sense again.
hklm/security/shell/start info
change hidesettings to 0 and it will show in start menu.
Thanks all.
Thank you. I am so used to android. The reg tibp and the bsb tip both work, but i actually made a script to pull the settings program wrom the windows dir onto the menu as a short cut.
Im glad there are people on here willing t help!
Last nite, while exploring settings, I found bt profiles which let me choose among many auto answer options:
- when bt connected
- when bt + headset connected
- when wired connected
- when ...
But now I can't find those settings anymore: where are they ???
There are options for this under settings -> speech at the bottom there is a drop down menu
Freypal said:
There are options for this under settings -> speech at the bottom there is a drop down menu
Click to expand...
Click to collapse
thanks. Hope wp wiki instructions writers will add this guide soon.