Related
Hi all as you can see form the title im new and would like to flash my wing, I just got a bricked wing, replaced LCD and its working now but slow as hell Ive already clocked it to 247 would not go any higher screen would flicker, now i want to flash in hopes that i can clock it higher, Ive been reading this guide
A Herald's Guide to Flashing Aserg, USPL and HARD-SPL need a few answers on things that I'm not to clear on, What is SPL, and how can i find out if i have 4.0 or higher. and can i put any NBH OS file in that RUU folder, and the only program i need to flash is ActiveSync, sound very easy compared to Moto phones.
and one last thing is there any other flashing tutorials out there what i can read up on before i do my first flash,
any help would be greatly appreciated
you should use USPL or HardSPL to flash. SPL contains the cid lock and other stuff. USPL temporarily bypasses the lock and HardSPL overwrites it.
you can put any .nbh in the ruu as long as it's specifically made for herald.
to check your spl version, go into bootloader by soft resetting while holding the camera key.
Hi and thanks for the quick reply all went well with my flash, but for some reason i cant over clock past 247 thning start flickering, thank you
fzzyrn said:
you should use USPL or HardSPL to flash. SPL contains the cid lock and other stuff. USPL temporarily bypasses the lock and HardSPL overwrites it.
you can put any .nbh in the ruu as long as it's specifically made for herald.
to check your spl version, go into bootloader by soft resetting while holding the camera key.
Click to expand...
Click to collapse
heres the quick answer for you, just the the xda-wiki tab and find the herald option and just read on how to flash. WARNING, read everything before you flash and have fun!!! Good Luck
heres the quick answer for you, just use the xda-wiki tab and find the herald option and just read on how to flash. WARNING, read everything before you flash and have fun!!! Good Luck
first flash
Hi y'all my first flash went with out a flaw yeah i did read all over and over and read it all again, I used ttran001 V.3 biggy the only had part was setting around network wizard to setup IE and Opera, but thats cuz i only have T-web 5.99 plan, just wanted say yeeehaw I'm a happy camper now let the tweaking begin, off to find Vioce Command
c1bear said:
Hi y'all my first flash went with out a flaw yeah i did read all over and over and read it all again, I used ttran001 V.3 biggy the only had part was setting around network wizard to setup IE and Opera, but thats cuz i only have T-web 5.99 plan, just wanted say yeeehaw I'm a happy camper now let the tweaking begin, off to find Vioce Command
Click to expand...
Click to collapse
Here ya go...and welcome to xda! Get ready to spend an ungodly amount of time on your phone and on this site! lol.
dougstoner said:
Here ya go...and welcome to xda! Get ready to spend an ungodly amount of time on your phone and on this site! lol.
Click to expand...
Click to collapse
Aw thanks for the greet, and the file i all ready got it and installed it works great wonderful easy setup. yeah i know I'll be here much of my free time and even time at work now now that i have a screen that's big enough to see, had to put up my k1 moto up when got this wing with a bricked screen, i must say flashing these are alot essayer the moto,
Hey I'm new to the whole Customizing my phone. I'm getting a wing very very soon & I would like to know what exactly is the first thing i do to start flashing and customizing. I know their are guides but there is a lot of info and its kind of confusing, I just don't wanna brick my phone the first day I get it. So anyone please help if you can.
Thanks
Arcade2021 said:
Hey I'm new to the whole Customizing my phone. I'm getting a wing very very soon & I would like to know what exactly is the first thing i do to start flashing and customizing. I know their are guides but there is a lot of info and its kind of confusing, I just don't wanna brick my phone the first day I get it. So anyone please help if you can.
Thanks
Click to expand...
Click to collapse
First thing is to read about hard spl and hard spl your wing. this would allow you to flash different roms. Just read the instructions before flashing.
Read, read, and read some more.
Don't do something that is "pretty close" to what the step says, only if it matches exactly. (Otherwise you may end up with a shiny new doorstop, not a great new phone.)
Read here:
http://forum.xda-developers.com/showthread.php?t=358615
live4nothing said:
First thing is to read about hard spl and hard spl your wing. this would allow you to flash different roms. Just read the instructions before flashing.
Click to expand...
Click to collapse
Ah thanks, I'll read up on it. & So after I hard spl it I can start flashing and other things? nice Ty.
PuffyTacos said:
Read, read, and read some more.
Don't do something that is "pretty close" to what the step says, only if it matches exactly. (Otherwise you may end up with a shiny new doorstop, not a great new phone.)
Read here:
http://forum.xda-developers.com/showthread.php?t=358615
Click to expand...
Click to collapse
Lol so true, I'm going to keep on reading , ty for the link too
Also I want to know how to get the maximum performance out of the wing. I heard about over clocking .
oveclocking is good.but use it at your own risk and dont be greedy
Arcade2021 said:
Lol so true, I'm going to keep on reading , ty for the link too
Also I want to know how to get the maximum performance out of the wing. I heard about over clocking .
Click to expand...
Click to collapse
Yeah, you will probably want to Hard spl your phone. This makes it easier to flash to whatever rom you wish. Yes, once you hard spl, then you can flash new roms. ...BUT, read read read. Before I hard spl'd, I read about it for a week or so to make sure I understood the entire process. It's pretty simple though. Just make sure your IPL number is greater than 4. If not, you will brick your device for sure. Read this...Papamopps wrote it.
Default HARD-SPL - working!
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT) (you can check by putting your wing in bootloader. Hold the camera button down and soft reset (use the stylus and push the little button on the left side. Keep holding the camera button until you get a screen with 3 colors. (red, green, blue). There it will show you ipl number.
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/...l_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
POOPIE4279 said:
oveclocking is good.but use it at your own risk and dont be greedy
Click to expand...
Click to collapse
Yeah, you will prob want to overclock. Just use batterystatus to do it. Most people stay around 247 or so, but I run 286 and have never had any issues with it.
Ok guys,
As I've already posted in a previous thread (the huge "Telstra 850 version working in USA on 3G" thread), I recently bought this Aussie T8285 HD because it had U.S. 3G capabilities.
As a result, I've been wanting to HSPL and flash my new HD because:
1.) though the phone works fine in making calls with my AT&T service/sim card and updating my google e-mails, the 3G internet is not working right now (internet only works when I use wifi). **special thanks to felixjai and bill48105 in the previous thread for nicely helping me troubleshoot my problem, suggesting that I need to HSPL and flash it for the 3G to start working**
but more importantly...
2.) I want to get rid of the Telstra crap in the phone and be able to install Dutty's and other cool stuff on this site
So I wanted to make sure before doing any major tweaking to fully understand and comprehend the whole process (as you can obviously tell, I am a newb). But to be completely honest, all the jargon is quite over my head and I realize that it'll simply take actual experience to fully comprehend all of this.
So I guess my question is, from what I was able to glean from the wiki-pages (and I've read it several times over), is that all I need to do is, with what I want to do in the above two points:
FIRSTLY, Hard_SPL (not SSPL or USPL, but HSPL) my HD by following exactly step-by-step this page:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash3
and THEN SECONDLY, DL and install Dutty ROM from this page?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_cookedroms
- Do I need to have the Dutty .cab ready and downloaded already on my PC and ready to install (and where do I drop this ROM into? into a folder?) to my HD or can I DL and install it at a later time?
- Does this whole process have nothing to do with the radio? I can leave the radio alone?
- How do I know if my version of the HD is ok to HSPL? On the wiki page, it says that it needs to be BLAC100 but I have BLAC250...is this still ok to HSPL? Do I need to update/download/change anything on my HD before starting this process?
I apologize for the long-winded email and for what probably is totally childs-play for you pros out there, but please bear with me...it is all a bit overwhelming and I just want to make sure as I don't want to permanently screw up my $1000 device. THANK YOU VERY, VERY MUCH FOR THE HELP!
markgencorelli said:
Ok guys,
As I've already posted in a previous thread (the huge "Telstra 850 version working in USA on 3G" thread), I recently bought this Aussie T8285 HD because it had U.S. 3G capabilities.
As a result, I've been wanting to HSPL and flash my new HD because:
1.) though the phone works fine in making calls with my AT&T service/sim card and updating my google e-mails, the 3G internet is not working right now (internet only works when I use wifi). **special thanks to felixjai and bill48105 in the previous thread for nicely helping me troubleshoot my problem, suggesting that I need to HSPL and flash it for the 3G to start working**
but more importantly...
2.) I want to get rid of the Telstra crap in the phone and be able to install Dutty's and other cool stuff on this site
So I wanted to make sure before doing any major tweaking to fully understand and comprehend the whole process (as you can obviously tell, I am a newb). But to be completely honest, all the jargon is quite over my head and I realize that it'll simply take actual experience to fully comprehend all of this.
So I guess my question is, from what I was able to glean from the wiki-pages (and I've read it several times over), is that all I need to do is, with what I want to do in the above two points:
FIRSTLY, Hard_SPL (not SSPL or USPL, but HSPL) my HD by following exactly step-by-step this page:
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash3
and THEN SECONDLY, DL and install Dutty ROM from this page?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_cookedroms
- Do I need to have the Dutty .cab ready and downloaded already on my PC and ready to install (and where do I drop this ROM into? into a folder?) to my HD or can I DL and install it at a later time?
- Does this whole process have nothing to do with the radio? I can leave the radio alone?
- How do I know if my version of the HD is ok to HSPL? On the wiki page, it says that it needs to be BLAC100 but I have BLAC250...is this still ok to HSPL? Do I need to update/download/change anything on my HD before starting this process?
I apologize for the long-winded email and for what probably is totally childs-play for you pros out there, but please bear with me...it is all a bit overwhelming and I just want to make sure as I don't want to permanently screw up my $1000 device. THANK YOU VERY, VERY MUCH FOR THE HELP!
Click to expand...
Click to collapse
Here's a quick guide for you
A warning before you flash any rom!
You must flash HardSPL first to be able to flash any rom!
.... * More info and instruction about HardSPL!
An alternative is USPL, it doesn't change your original SPL!
.... * More info and instruction about USPL!
Tips about flashing a rom
.... * Use fully charged device
.... * Switch off your device by holding the Power button untill a menu pops up
.... * Go to bootloader by holding Volume down + Power button at the same time
.... * Connect your device to your PC
.... * Start BlackStoneCustomRUU.exe and follow the onscreen instruction's
An alternative is to flash your device from storage card
.... * Rename RUU_Signed.nbh to BLACIMG.NBH and copy it to your Storage Card
.... * Follow the above steps to go in bootloader
.... * A messages will popup, push power button to start flashing or Volume down to cancel
.... * After it's done a new message popsup, softreset your device
I took this from Laurentius, so I hope he doesn't mind. L26 ultimate series for Touch HD
Fallen Spartan said:
Here's a quick guide for you
A warning before you flash any rom!
You must flash HardSPL first to be able to flash any rom!
.... * More info and instruction about HardSPL!
An alternative is USPL, it doesn't change your original SPL!
.... * More info and instruction about USPL!
Tips about flashing a rom
.... * Use fully charged device
.... * Switch off your device by holding the Power button untill a menu pops up
.... * Go to bootloader by holding Volume down + Power button at the same time
.... * Connect your device to your PC
.... * Start BlackStoneCustomRUU.exe and follow the onscreen instruction's
An alternative is to flash your device from storage card
.... * Rename RUU_Signed.nbh to BLACIMG.NBH and copy it to your Storage Card
.... * Follow the above steps to go in bootloader
.... * A messages will popup, push power button to start flashing or Volume down to cancel
.... * After it's done a new message popsup, softreset your device
I took this from Laurentius, so I hope he doesn't mind. L26 ultimate series for Touch HD
Click to expand...
Click to collapse
THANKS for the info !
So how do I know if my HD is OK to HSPL?
My HD is not BLAC100 and the wiki page states that if "ModelID is different, contact us for testing"...
Do I need to tweak any of my settings on my phone before starting the HSPL process or is it just good to go as is?
Something that I have been wondering about... is one method of flashing 'safer' than another? i.e. is it just a user preference or is there a reason one should attempt one method before the other?
skribzy said:
Something that I have been wondering about... is one method of flashing 'safer' than another? i.e. is it just a user preference or is there a reason one should attempt one method before the other?
Click to expand...
Click to collapse
Someone correct me if I'm wrong (and I could be since I'm a newb), but I believe HSPL is better because then it makes it more difficult in bricking your phone.
I wasnt thinking so much about HSPL vs USPL but rather flashing from SD card vs PC!
skribzy said:
I wasnt thinking so much about HSPL vs USPL but rather flashing from SD card vs PC!
Click to expand...
Click to collapse
Only difference is that you don't need to be connected to your pc to flash the ROM. Both are just as safe. Its a users preference.
thanks! that clears that one up!
Hello all,
I have searched (and searched) and came across a lot of info on this site about changing/flashing ROMs, etc etc but was hoping for some simple advice and response to my particular question. I am going to soon have the HTC HD T8285 Australia Telstra model for use in the U.S. on At&T's network. The phone comes stock with WM 6.1, if I chose to change that to perhaps an Energy ROM or Dutty's or whatever (that simulates WM 6.5), what are the simple and basic steps one would need to follow to do that for this particular device? I know there are "how to's" on here, but to be honest they are kinda confusing, overlap or have some if/then parameters that I don't understand as a somewhat new person to flashing a ROM. Can anyone give any specific steps and advice that is easy to follow to accomplish a flash on this phone? GREATLY appreciate the help!!!
i went the same route months ago buying the touch hd from austrailia. you should have some knowledge about flashing else what I'm about to say will sound like greek:
i suggest using uspl to do your flashing. what you will need is uspl or hspl (depending on preference), task 29, radio of your choice since it will come with an old radio, rlphone (i suggest rlphone 1.15 if you choose radio 1.17) of your choice, rom of your choice. below will be the steps i use and i use uspl:
- put phone in bootloader mode (turn phone off and hold vol down button and hit the power button), connect to pc, and run uspl. you will see "uspl 1.15" appear on your screen
- task 29 with the radio nbh in the same folder. once finished your phone will restart but wont go past the "smart mobility" screen. normal; just take teh battery out
- run uspl again. you will see uspl 1.15 again
- download the rom of your choice
done. i can simplify it a lil more, i have detailed instructions home but not here. this is just off the top of my head. whole process should take about 20 mins.
-
Let's say I'm new to doing this, first timer, and I have an HTC HD T8285 that appears to be locked to Telstra. What spelled out steps do I need to take to flash to a new rom? I know how to use a computer, etc..I do it for a living, just not too keen on this stuff and probably need to be spoon fed.
It can't be spelt out any simpler than the Dummies Guide which is posted as a sticky on this forum. If it is difficult for you to scroll upward, here is the link http://forum.xda-developers.com/showthread.php?t=505377
To be honest, if you can't follow these very clear and simple step-by-step instructions, you'd be better off not doing it.
I used these to flash my HD which, to be fair, is a more complicated process than my previous Orbit. The first couple of times failed because I missed a step through thinking I knew better than the author.
So don't guess, don't skip, just print the instructions, read them through first, assemble the downloads you need then follow the instructions precisely, ticking them off as you go.
This has been a step-by-step guide to following the step-by-step guide already written.
Oh, and you should ask questions about following the guide in that thread, not this one.
Memory/Storage Space?
After flashing a rom (Energy) on this device, just curious if anyone else with the same model (T8285 or T8282) noticed a significant drop in the memory specs as follows??:
"Storage Total" stock spec is 512MB...I show 260MB....where's the missing 252MB??
"Program Total" stock spec is 288MB...I show 190MB....where's the missing 98MB??
closet410 said:
i went the same route months ago buying the touch hd from austrailia. you should have some knowledge about flashing else what I'm about to say will sound like greek:
i suggest using uspl to do your flashing. what you will need is uspl or hspl (depending on preference), task 29, radio of your choice since it will come with an old radio, rlphone (i suggest rlphone 1.15 if you choose radio 1.17) of your choice, rom of your choice. below will be the steps i use and i use uspl:
- put phone in bootloader mode (turn phone off and hold vol down button and hit the power button), connect to pc, and run uspl. you will see "uspl 1.15" appear on your screen
- task 29 with the radio nbh in the same folder. once finished your phone will restart but wont go past the "smart mobility" screen. normal; just take teh battery out
- run uspl again. you will see uspl 1.15 again
- download the rom of your choice
done. i can simplify it a lil more, i have detailed instructions home but not here. this is just off the top of my head. whole process should take about 20 mins.
-
Click to expand...
Click to collapse
thank you for good guide
unfortunately, during the task29 running screen show a error massage (invalid vendor). how i can solve the problem?
great thanks
So i have a pretty much newbie question. I figured out how to load a new rom on my tp2 I am currently using Energy Rom, rom date 3/15/10 with manila 2.520161332.0, radio version 4.4825.20. I am through at&t and i was wondering how i load the newest Energy rom and which one that is? maybe someone could post a link with it, if they have time. Also what do I do for steps as in for loading a new rom when i already have a burnt one on my tp2. Sorry such a newbie question hope I can get some help from experts, thank you.
Might want to look in the ROM Development subforum. The process is covered in detail there.
Go here and read the fifth thread down. -> http://forum.xda-developers.com/forumdisplay.php?f=490
cajunflavoredbob said:
Go here and read the fifth thread down. -> http://forum.xda-developers.com/forumdisplay.php?f=490
Click to expand...
Click to collapse
Thank you for the response, I already did my first flash from stock to energy rom dinik. question is do I have to do the hard spl again? I was reading about task 29 Do i do that to clear this current rom? Then load the new one? I guess my main question what steps do I follow to replace a out dated flashed custom rom?
nitegmoney said:
Thank you for the response, I already did my first flash from stock to energy rom dinik. question is do I have to do the hard spl again? I was reading about task 29 Do i do that to clear this current rom? Then load the new one? I guess my main question what steps do I follow to replace a out dated flashed custom rom?
Click to expand...
Click to collapse
Ah, that's a much more clear question. Hard SPL is permanent until you flash the stock one back for whatever reason. Basically, it'll stay there until you remove it yourself. task29 is a good idea to do between ROM flashings. It clears out and formats the internal memory. It prevents the device from retaining traces of the old ROM when you flash the new one. Use the order listed below.
1. back up any important data and reboot into bootloader (hold voldown while pressing reset)
2. run task29
3. flash new ROM
4. hard reset (hold talk/send and end while pressing power button)
5. set up the new device
The hard reset is kind of optional, but I do it anyway since I'm kind of OCD like that.
1. back up any important data and reboot into bootloader (hold voldown while pressing reset)
2. run task29
3. flash new ROM
4. hard reset (hold talk/send and end while pressing power button)
5. set up the new device
The hard reset is kind of optional, but I do it anyway since I'm kind of OCD like that.[/QUOTE]
thank you very much this should help just a couple questions (sorry I was very cautious when flashing my first rom as well, because I didn't want to screw anything up).
1. If i dont wanna save any data besides whats on my sim and sd card just remove both before starting any of the 5 steps?
2. Are there any roms with cookie 2.0?
3. In step one you say reboot into bootloader (hold volume down while pushing reset, which button is reset?
4. Task 29 I jus run on my comuter i take it while synced?
Sorry I'm very cautious lol if you cant tell, just want to make sure I dont mess anything up.
Thank you for your help I feel about half way ready to attempt again lol.
nitegmoney said:
thank you very much this should help just a couple questions (sorry I was very cautious when flashing my first rom as well, because I didn't want to screw anything up).
1. If i dont wanna save any data besides whats on my sim and sd card just remove both before starting any of the 5 steps?
2. Are there any roms with cookie 2.0?
3. In step one you say reboot into bootloader (hold volume down while pushing reset, which button is reset?
4. Task 29 I jus run on my comuter i take it while synced?
Sorry I'm very cautious lol if you cant tell, just want to make sure I dont mess anything up.
Thank you for your help I feel about half way ready to attempt again lol.
Click to expand...
Click to collapse
All of these questions could have been answered if you read some of the threads available in the ROM development area. You're lucky I'm feeling generous today.
1. Removing the SIM and SD is optional. I never do, but some people swear by it. It's up to you whether you do or not.
2. There are lots of them. Have a look around. You could always install it over an older CHT version or onto a ROM without CHT at all.
3. There should be a tiny reset button hole that your stylus will fit into on the right side of the device under the battery cover. If you have a T-Mobile device, it's right next to the noise-canceling mic on the left side. You should already be in bootloader when you flash anything, including task29.
4. task29 has two files. The *.nbh file can be anything at all. It makes no difference. The *exe that comes with the download is what does the formatting. You should already be in the bootloader before doing this. It will flash the *.nbh file onto the device. When it is finished, it runs the format command from the .exe and formats the device. Once the percentage gets to 100%, it will hang for a moment while the task29 command is running. It takes about 10 seconds while it says 100% on the screen. During this time, hold down the voldown button until it reboots. Once you get back to the bootloader, go ahead and flash your next ROM.
Once you get the hang of it, the whole process shouldn't take you more than about 15 minutes or so. Setting everything back up after a flash is what is so time-consuming. Most ROMs come with some form of an auto-install program designed to install programs and import other data automatically. Read the thread of whichever ROM you choose before diving into it.
Don't ask us for our opinions on which ROM you get either. That's like asking which music you should listen to. Everyone likes different things. Just keep flashing ROMs until you find one you like. Otherwise, you can find hundreds of threads from other users asking "Which ROM should I choose" all over the forum.
Ok. sounds pretty easy, thank you for being so generous and as I was browsing I found a link with how to run the task 29 http://forum.xda-developers.com/showpost.php?p=5845908&postcount=1 from what i gather on this just sync and run the .exe file and that should take me to the bootloader screen? and the after its done run my .nbh file from my custom rom and should be the end besides setting up the rom? I've seen to many people ask which rom is best and seen the responses people have given them so I know better to ask lol. Thank you once again, I greatly appreciate it.
nitegmoney said:
Ok. sounds pretty easy, thank you for being so generous and as I was browsing I found a link with how to run the task 29 http://forum.xda-developers.com/showpost.php?p=5845908&postcount=1 from what i gather on this just sync and run the .exe file and that should take me to the bootloader screen? and the after its done run my .nbh file from my custom rom and should be the end besides setting up the rom? I've seen to many people ask which rom is best and seen the responses people have given them so I know better to ask lol. Thank you once again, I greatly appreciate it.
Click to expand...
Click to collapse
It sounds like you've got it. Just don't use the customromruu.exe file from the task29 to flash anything other than the nbh that comes with it. It will erase anything it flashes to the internal memory right after flashing it. Any other ruu.exe file is interchangeable for anything else, though.
I downloaded the task 29 zip folder and unzipped it and got a file "task 29 provided by doloop" take it that is what I'm suppose to use? One last question for you, on this sight how do you find the latest version of a rom?
nitegmoney said:
I downloaded the task 29 zip folder and unzipped it and got a file "task 29 provided by doloop" take it that is what I'm suppose to use? One last question for you, on this sight how do you find the latest version of a rom?
Click to expand...
Click to collapse
They must have changed the format of the task29 tool. Either that or I've got an older version. Mine's wrapped up nicely in one simple *.exe file. If you downloaded the *.zip from the first post of the task29 thread, then just double click on ROMUpdateUtility.exe to begin the process. Where did you download your file from? Provide a link so I can better answer your question.
The latest version of a ROM is normally on the first page somewhere. It varies by chef, however. Some put links as a reply in the thread, so it might be a ways back. Check the first page of posts first. If you don't find it there, ask on the thread. Be sure to read the rules and FAQs of the ROM before posting questions.
The best advice I can give you is to always search first before posting questions. Take the time to show other members that their time is no less valuable than your own, and most members will bend over backward to help you out. If you post without searching or doing work for yourself, it tells other members that your time means more than theirs, and you are more likely to get flamed rather than helped.
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
this is the link where i dowloaded it from the in the very first box, you have really been such a great help, let me know if this is the right one thank you.
nitegmoney said:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
this is the link where i dowloaded it from the in the very first box, you have really been such a great help, let me know if this is the right one thank you.
Click to expand...
Click to collapse
Extract and drop the attached file into a folder with that *.exe, and you'll be all set. This file is basically just a tiny OS that it will flash before hand. As I said, once the process gets to 100%, it will hang there for about 10 seconds or so while it formats the memory. It will erase what this file writes anyway. I think the *.nbh from the first post is a HTC boot screen file. That will change the first boot screen you see when the device powers on and you see the red letters at the bottom left of the screen. I don't need to change my boot screen, so I use this one, since the task29 will wipe it out right after, leaving no trace of anything being flashed.
Thank you very much, quick question while your here, got my rom downloaded after the task 29 do i run the .nbh file or rhodium software upgrade? Can't say thanks enough
with the file you gave me after i extraxt with 7 zip it says windows cannot recognize this file? is it cause i have windows 7?
nitegmoney said:
with the file you gave me after i extraxt with 7 zip it says windows cannot recognize this file? is it cause i have windows 7?
Click to expand...
Click to collapse
You don't run that file. Put the *.exe into a folder with the*.nbh file I just gave you. You run then double click on the *.exe to begin the task29 process. The *.nbh is a required file. I don't know if it is included in the one you downloaded or not.
On second thought, here are the task29 file I use. Extract to a folder, run the *.exe, be happy, in that order.
Got it work with the two files custom ruu and the .nbh just click the custom ruu one and start from there? Sorry for being a birden.
nitegmoney said:
Got it work with the two files custom ruu and the .nbh just click the custom ruu one and start from there? Sorry for being a birden.
Click to expand...
Click to collapse
Make sure the device is connected via ActiveSync, or put it into bootloader and make sure it says USB at the bottom of the screen. After you confirm one of these two scenarios, run the*.exe. Once it gets to 100%, hold the voldown button and allow it to boot back into the bootloader. From there, wait for USB to show at the bottom, and begin flashing the new ROM. I honestly don't think I can make it clearer than this. I hope you get it working.
You've made it very simple i just got to the bootloader screen thank you, it says usb, but when i try to run the custum ruu nothing happens
nitegmoney said:
you've made it very easy and I do appreciate it very much... Only issue im having wen trying to enter bootloader mode it says it cannot be opened as it is not signed with a trusted certificate....?
Click to expand...
Click to collapse
I assume you meant the *.exe is giving you the message. Turn off antivirus software, and run the file as administrator.