Related
Hi all, I have a frustrating problem with my Cingular 8525. I just formatted the comp and installed Vista Ultimate on it fresh. I downloaded WMDC but I can't get it to recognize my phone for the life of me. It keeps saying "connecting" forever and never does. I have done all sorts of installs, re-installs, hard resets, but I can't get it to detect at all! Can anyone help? Thanks in advance.
NYKUNLV said:
Hi all, I have a frustrating problem with my Cingular 8525. I just formatted the comp and installed Vista Ultimate on it fresh. I downloaded WMDC but I can't get it to recognize my phone for the life of me. It keeps saying "connecting" forever and never does. I have done all sorts of installs, re-installs, hard resets, but I can't get it to detect at all! Can anyone help? Thanks in advance.
Click to expand...
Click to collapse
first try to install the driver of your device.. go to device manager and look for unknown device at OTHERS..
good night and good luck
The driver is installed... it displays HTC USB Sync. I am getting frustrated . Stupid Vista.
USE the search function dude
Hermes vista config guide
Also make sure you dont have any firewalls active. I have had issues syncing my phone with my computer when using AVG's firewall. I simply disabled the firewall and it fixed my problems.
mrvanx said:
USE the search function dude
Hermes vista config guide
Click to expand...
Click to collapse
I already tried that guide... still not working. Ill try disabling the firewall
go to settings->connections->usb to pc and then check Enable Advanced network functionality.
If that doesn't work remove/uninstall htc sync device, unplug device and plug in device to reinstall the htc sync device after you have set the usb to pc connection settings.
Also try using a different USB cable and plugging it into a different port, you never know, it could just be something defective.
But I'm putting my money on the firewall
I had a problem connecting my 8525 to my Vista machine. It would say connecting but it would never finish 'connecting'. It took a while but finally I figured out what was causing it. It was the 'recording' .wav files in the notes directory that were causing the issue. If you have any .wav files in your notes directory I'd suggest moving them to say your SD card or deleting them. That fixed the 'connecting' problem for me and since I did that it's been syncronizing fine ever since.
I tried everything listed in here at once.... something worked I should have done each step by step to pinpoint what exactly... but its working now. Thanks everyone!
NYKUNLV said:
I tried everything listed in here at once.... something worked I should have done each step by step to pinpoint what exactly... but its working now. Thanks everyone!
Click to expand...
Click to collapse
Same for me. I had a load of problems getting the Mobile Device Center working with my HTC TyTN. First I was unable to even install the driver when I first connected my device. The "add new hardware" wizard always tried to connect to Windows Update and install an updated driver which then failed. The solution was to let it fail and manually install an older driver from the list using the icon in Device Manager. After that I could start Windows Update and download the latest update.
Then I had the same problems as you describe. When I started WMDC it just hung while displaying "Connecting". Looking in the task manager I noticed that the wmdc.exe process was consuming more and more memory, up until something like 250 MB, after which WMDC just showed "Error". Finally I got it to work. It is hard to pinpoint exactly what I did to fix it. I know that the "advanced network features" under USB in connection settings on the TyTN need to be ticked and the device showing as a Windows Mobile Device instead of HTC USB Sync.
Initially I did a hard reset of the TyTN. Further, I manually unistalled and reinstalled the driver in Device Manager a couple of times. I tried to reboot both the computer and the TyTN several times. Also, I did restart the "Windows Mobile-based device connectivity" service after plugging in the cable. Finally it just recognized my device and I could setup the partnership. Now I can sync over bluetooth too and skip the cable.
HTC phone support was not very helpful with this problem. "We will call you back". Yeah right.
Mobile cofiguration:
Dopod 838 Pro
LVSW 4/17/07 WM6
Hard SPL
PC configuration:
Windows Vista Business Edition
I encountered the same problem. Currently able to sync back by hard resetting my device. The USB to PC connection on settings does not appear to affect the sync problem.
I suspect that the problem arise when I originally sync with an XP machine.
What worked for me was to enable the advanced usb setting on the phone as mentioned...then while the phone is still plugged in, I removed everything associated with the phone from device manager on the pc. Once that was done, I unplugged the cable, waited a few seconds, and plugged it back in (with the advanced usb settings still checked.) Worked like a charm with WMDC.
I had problems with all sorts of "connectivity" in Vista, including connecting up my Trinity, and setting up my xbox 360 as a media extender.
As soon as I uninstalled MS One Care it all started working.
I saw a thread on this subject last week but can't for the life of me find it anywhere now.
5 days ago I upgraded my computer to Vista Home Premium via an upgrade rather than clean install but first I flashed the Black Satin ROM to my Vario II.
Upon downloading WMDC 6.1 for the first time, my Vario synced and all appeared rosey; a computer running Vista and a lovely new WM6 device.
For some reason though, it now won't sync at all. The device knows it is plugged into a host (the charge light comes on and activesync keeps trying to connect) but the host doesn't register it. IT worked literally the day before and now nothing.
My work PC (running Vista business) has has no issues with the upgrade. WMDC just recognised it as a new device and I deleted the old partnership.
Any ideas? I've just uninstalled, redownloaded and reinstall WMDC but no change; computer still doesn't recognise the device.
Help!
It would appear that disabling advanced network functionality has now allowed my PC to see the WM Device.
Any suggestions as to why this is only an issue on my home PC?
Have you've tried the WIKI?
Try this link. There are problems with Vista, follow this instructions and it should work. Follow it!
After upgrading to ATT WM6, I am receiving a USB device not recognized more often than not when I try to sync via Activesync. I tried resetting, restarting the phone and/or computer. Advanced network option on phone USB to PC connection is off. Any ideas? Thanks.
WM6 & Firewall
When I upgraded - my firewall was not happy anymore. Try killing your firewall, deleting any previous settings in your sync center for the device, than reconnect it.
Still problems with USB, Activesync 4.5 and WIN XP
I reinstalled usb drivers, activesync, and reset the phone but no dice getting the computer to recognize the phone. It will briefly but activesync never gets rolling before it drops.
Im currently having an issue where I plug my phone into USB on its cradle, and it connects ok, but after about 30-60 seconds it disconnects and reconnects. Very annoying.
However, BEFORE I got to THIS point, when I plugged my phone into USB from a hard reset (actually a replacement phone) it would just say a USB device has malfunctioned and has not been recognised, or something like that. I finally got round it by disabling the advanced usb networking functionality as you said you tried - but I noted that it only actually worked after a hard reBOOT. i.e. after switching OFF advanced networking, the effect of doing so didn't become apparent until I had rebooted the phone - at this point it recognised it, installed the drivers and Vista Windows Update went and upgraded all the drivers.
Now I just cant get it to stay connected for more than 30 seconds or so :/
Hard reset did the trick.
Thanks for that pearl.
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
deadmau said:
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
Click to expand...
Click to collapse
Firstly, what operating system are you using on your PC?
Secondly, have you tried deleting the sync partnership on both your phone and the PC and recreating it?
Thirdly, try and connect your phone directly to the USB root hub on your PC and not via a hub.
The fact that the HD2 is identifying the physical connection suggest the problem may lie at the PC end. Recreating the sync partnership is probably all that's needed.
Hello
If you are using Vista or Win7 you need to download Microsoft Mobile Device Manager to get a successful connection. Once you download this and install all will be good.
There is an option (can´t remember where) where you can disable fast link for ActiveSync.
This fast option has created me a lot of problem.
i'm using win7, i reinstalled the mobile device.
If i disable enable faster data sync then I can sync the phone with the computer but if I enable faster data sync then the 3G band auto enables...
I have just in the last weekend somehow lost the ability to connect to any computer. I have an activesync connection with work and a connection via hsdpa to the server too, and then one via wmdc on my vista home computer.
All has been going swimmingly until the weekend when I noticed that it had stopped synching new appointments.
The computers (both) now no longer even detect the phone, although it does charge via the usb cables.
The settings are still set to sync on the phone (as opposed to say disk drive).
I've tried a bunch of things, and now annoyingly, have hard reset the phone, but no joy!! Now I have the joy of setting everything back up again... But still no synchronising with the computer.
Any thoughts would be greatly appreciated.
bcorgan said:
I have just in the last weekend somehow lost the ability to connect to any computer. I have an activesync connection with work and a connection via hsdpa to the server too, and then one via wmdc on my vista home computer.
All has been going swimmingly until the weekend when I noticed that it had stopped synching new appointments.
The computers (both) now no longer even detect the phone, although it does charge via the usb cables.
The settings are still set to sync on the phone (as opposed to say disk drive).
I've tried a bunch of things, and now annoyingly, have hard reset the phone, but no joy!! Now I have the joy of setting everything back up again... But still no synchronising with the computer.
Any thoughts would be greatly appreciated.
Click to expand...
Click to collapse
Did you reboot the PC? I occassionaly have problems with activesync stopping working suddenly. It doesn't really like being unplugged sometimes and get's a bit ansy about it. I've found that sometimes a soft reset of the phone does it, but sometimes I need to reboot the PC.
I hope you did try rebooting the PC before you did a hard reset. At least you wouldn't have wasted your time with having to set up your phone again!
Yes did indeed! Restarted both. But the fact that it's affecting 2 computers suggests to me that it's something wrong with the phone, and not computers themselves.
HTC haven't been any help as yet - just haven't responded to my requests.
bcorgan said:
Yes did indeed! Restarted both. But the fact that it's affecting 2 computers suggests to me that it's something wrong with the phone, and not computers themselves.
HTC haven't been any help as yet - just haven't responded to my requests.
Click to expand...
Click to collapse
The fact that it still doesn't work after a hard reset leaves me at a loss!
You're telling me!
Before anyone asks also, I've tried different cables and different usb ports on both computers too.
Any other thoughts out there? I'm starting to think now it's something inside the phone - i.e. the usb port?
Fixed for me!
After having sent off the phone to HTC, it was repaired in 8 days and that was sending it to and from Sweden to the UK!
Turns out the usb connector in the phone itself was not working. 10/10 for HTC repair service!
If you use the XPP OS.
You must select ‘To enable faster data synchronization’ (i dont konw how to translated that, sorry my English.) under the ActiveSyuc.
If you use the Vista OS.
You dont select this option otherwise you cannt connect you phone to computer.
me too,..i can't connect with my pc... my computer show me found new hardware & need 2 install driver,...tell me what kind of driver need...? thank!!!
me too,..i can't connect with my pc... my computer show me found new hardware & need 2 install driver,...tell me what kind of driver need...? thank!!!
Click to expand...
Click to collapse
Microsoft Corporation - Other hardware - PocketPC USB Sync
Download size: 11.1 MB
You may need to restart your computer for this update to take effect.
Update type: Recommended
Microsoft Corporation Other hardware software update released in May, 2007
At present, I'm confering with Microsoft about the issue I'm having with my Vista laptop. It finds the correct driver with windows update, but the driver fails to install even with a clean boot.... they're working on it...
deadmau said:
Hello
When I connect my hd2 to the pc throught the USB cable, the message on hd2 shows up to click sync but my computer can't see the hd2.
I went to device manager but it doesn't show up.
it worked 2 day ago, I even tryed at another PC.
I can recharge the phone from my computer...
Click to expand...
Click to collapse
I had the same problem and 'solved' it by trying every other USB port, and (of course) the last one did it correctly.
bcorgan said:
You're telling me!
Before anyone asks also, I've tried different cables and different usb ports on both computers too.
Click to expand...
Click to collapse
To make Active Sync work
Turn off Setup\other\USB to PC\ActiveSync Enable Faster Data Synchronization
The all will be ok
SOLVED!! Joy, joy, happiness glow... . I removed AVG 9.0, restarted, reinstalled WMDC and the driver (all of which installed automatically when I plugged my HD2 in to the USB port), and reinstalled AVG 9.0 and… Voila, MAGIC! I had AVG configuered correctly to allow WMDC to make connections and pass through the antivirus, but I still had to uninstall it to get the driver to install. Sometimes antiviruses are stubborn!
hi i had the same problem try this go to settings on your phone all settings connections usb to pc and uncheck the fast sync box if that dont work theirs an option that is somewhere on your pc where you can choose the pc to search for an update driver for that device
marquez2010 said:
hi i had the same problem try this go to settings on your phone all settings connections usb to pc and uncheck the fast sync box if that dont work theirs an option that is somewhere on your pc where you can choose the pc to search for an update driver for that device
Click to expand...
Click to collapse
I tried BOTH of those options prior to uninstalling AVG and no joy. Bytheway, I've switched to Microsoft Security Essentials and still have to uninstall MSE everytime I flash my HD2! UGH!
Ive bought a netbook running windows 7 starter, now my hd2 wont connect with windows mobile device center.
I originally set up the pc synch(activesync) with an xp laptop and now it wont connect with the windows 7 netbook.
The phone is telling me to install activesync , but i cant because i have to install the newer windows mobile device center WTF
Ive deleted the old connections on activesync on my phone.
Is there something new to download to my hd2?
Any advice?
Thanks
windows mobile device centre does the same as activesync. it is the new name for activesync used on win 7.
i use the starter edition also on my netbook and cannot get mobile devicecentre installed for some weird reason. probably a problem on my netbook
started using ms myphone for the things i used mobiledevice centre for.
There must be way to connect the phone to a Windows 7 starter netbook.
I plan on doing a hard reset and want to preserve all my bookmarks, and also want to flash a ROM , I'm sure ill need to sync my phone to a computer for that?
The phone keeps telling me to install activesync on my pc even though I have to use wmdc.
When I reinstall wmdc on the netbook I keep getting an error and it won't install properly.
It says device manager not installed, or something like that .
It's a bloody mystery!
for flashing a rom you do not need activesync or mobile device centre. I flash my phone from my laptop without. just put the phone in bootloader and you can flash a rom as normal using the custom ruu. alternatively you can flash from memory card.
think ms myphone can backup that also but you have to check to make sure.
on my sig there is a flashing guide, in it there is a download for win 7 windows mobile device center run it and you should be good to go
this has been discussed so often, if you had taken the time to search there would be no need for that thread!
It so easy, just use windows update to download the driver and windows mobile center and that's it. If it doesn't work you are doing it wrong because it works for everybody else that way!
pabloh999 said:
Ive bought a netbook running windows 7 starter, now my hd2 wont connect with windows mobile device center.
I originally set up the pc synch(activesync) with an xp laptop and now it wont connect with the windows 7 netbook.
The phone is telling me to install activesync , but i cant because i have to install the newer windows mobile device center WTF
Ive deleted the old connections on activesync on my phone.
Is there something new to download to my hd2?
Any advice?
Thanks
Click to expand...
Click to collapse
Leave ytour phone, as the problem appears to be with the netbook. make sure your netbook is not connected to the internet, then disable all the security and see if WMDC recognises your phone.
Thanks for the respones, ill try those tips when I get a chance later in the day.
Apologies for starting a new thread if its been discussed many times before.
Right, i think ive tried everything.
Hard reset my hd2
Uninstalled wmdc
Did every windows update available
re-installed wmdc with webroot antivirus turned off and internet access turned off.
And it still wont recognise the hd2
When its installing the driver on my netbook for the hd2 it keeps getting an error - it says "unidentified device : device unplugged" even though it is plugged in and screen is on.
The phone will connect to my netbook for the disk drive option and the internet sharing option, so i dont think its a problem with the hd2 usb connection
Its a real mystery, anyone out there able to crack this one?
have you tried this?
settings, menu, all settings, connections, USB to PC, uncheck "enable faster data sync", click done.
when I did that, my HD2 finally connected to PC after DAYS of trying!
Yep! I sure have
The computer is just is not seeing my phone with the the activesync option, but it is seeing the phone with both the disk drive and internet sharing options.
When i try un-install wmdc some errors keep popping up, i have to manually go into the task manager and kill 2 .exe active files otherwise it wont uninstall, very strange indeed
Maybe it could be a usb port issue, but i have tried all 3 usb ports on my netbook.
Hi pabloh999,
I potentially have a fix for you. I experienced the same errors as you tried all you have and eventually found a fix - by accident!
Set to airplane mode on & then off. After this my connections & syncs were fine.
Let us know how you go.
pabloh999 said:
Yep! I sure have
The computer is just is not seeing my phone with the the activesync option, but it is seeing the phone with both the disk drive and internet sharing options.
When i try un-install wmdc some errors keep popping up, i have to manually go into the task manager and kill 2 .exe active files otherwise it wont uninstall, very strange indeed
Maybe it could be a usb port issue, but i have tried all 3 usb ports on my netbook.
Click to expand...
Click to collapse
Tried that and - nothing!
Its just not recognising my phone, its saying "device unplugged"
I even turned off the charging function when plugged into a pc, just in case that was draining too much juice from the usb port.
No problem solvers out there??
I am thinking now it could be a problem with the usb ports on my netbook.
On one of my million attempts i got a windows error message saying that i should use a high speed usb port, and it gave me a list of "high speed" usb ports on my computer.
I dont know how to use this information because it doesnt physically show which of my 3 usb ports is the "high speed one(s)"
I thought the three of them are the same?
I tried updating the usb drivers to no avail
Fu**ing pissin me off!
Sync with Win 7
Same problem here, Tried everything on the web and on XDA and still cant sync.
Is this a Microsoft Problem, Oh by the way dont agree with d3l1
Ican still sync with my old XP laptop, but my new Win 7 is crap... (Both are Asus machines)
Any pointers would be welome. Ta.