Database Users

Error 270

I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.

diacronic said:
I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.
Click to expand...
Click to collapse
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?

dougstoner said:
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?
Click to expand...
Click to collapse
ok that was disabled. I enabled it, same problem.
Seems to be running Open Touch 5.0.
Just bought it off ebay.

Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.

If it had OpenTouch 5.0, it might have already been HardSPLed. Either way, I'm glad you found the answer yourself. It shows that you actually did your research.

diacronic said:
Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.
Click to expand...
Click to collapse
That's really not a bad idea. I know I was EXTREMELY confused the first time I flashed my rom. It took me a lot of reading to finally understand RUU stood for rom update utility. You do know for some roms, it's not necessary to hard spl. I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?

There's a walkthrough by me somewhere in the forums.

dougstoner said:
.... I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?
Click to expand...
Click to collapse
Just downloaded ivan's kitchen , but I'm having problems getting it to run. Going to use that to probably make my own and get used to the programs that are out there.

Flash-help needed

Hi there guys,
i have i question/problem. Yesterday i wanted to flash my cruise with the dutch M-Amine-rom. I,ve done some flashes with my old wizard somewere like a year ago. Now I did read the polaris/cruise-wike, did succesfully install hardspl. I made an activesync-connection and brought my cruise in bootloader-mode. The problem (for me though) was that when te cruise comes in bootloader mode there was no more activesync-connection, there seems to be an usb-connection because in the tree-collored screen you can see 'usb'. My problem is that de second RUU-screen makes you clear that there has to be an active-sync-connection before you can flash/update your rom. So i didn't flash because i was affraid to brick my phone. Maybe it's normal and maybe the RUU will make the connection when running but i cant find the answer to that question. Can somebody help me? Is it normal that there's no active-sync-connection in bootloader-mode? Will the RUU make the connection and flash the device anyway?
Second strange thing: i secondly decided to flash with my sd instead according the discribed procedure. I ended up with an os with the number 1.28.00.00!!! So just an older version of wm6!!?? Afterwards I flashed back the official rom (3.13...) without being in bootloader but with an activesync connection because i thought with the official one you don't have to be in bootloader. Is this a right thought?? Anyway, I succeeded to replace original rom.
Sweat on the forehead!
Thanks in advance for great help.
Greetz!
Should I remove this tread after getting an answer?

Relax Ron - you have nothing to fear
The behaviour you describe in bootloader mode is normal - no need for activesync. You can click OK and away you'll go!
As for flashing from your sd card, only thing I can think of is that you somehow renamed an old nbh file, rather than the M-Amine nbh you were trying to flash.
I've used both methods (the sd card way has got me out of trouble a couple of times) and they both work fine.
Good luck!

cr1960 said:
Relax Ron - you have nothing to fear
The behaviour you describe in bootloader mode is normal - no need for activesync. You can click OK and away you'll go!
As for flashing from your sd card, only thing I can think of is that you somehow renamed an old nbh file, rather than the M-Amine nbh you were trying to flash.
I've used both methods (the sd card way has got me out of trouble a couple of times) and they both work fine.
Good luck!
Click to expand...
Click to collapse
Thanks for quick reply. I'll try to flash this day. In fact i'm quit sure it was the right nbh-file, so that part of the problem still remains a mystery. You're a great help, Thank you.

Steady Ron said:
Thanks for quick reply. I'll try to flash this day. In fact i'm quit sure it was the right nbh-file, so that part of the problem still remains a mystery. You're a great help, Thank you.
Click to expand...
Click to collapse
Anyway if you have problems or you are not sure on how to proceed ... go here and read, is a very nice guide for Polaris
http://forum.xda-developers.com/showthread.php?t=381600
ciao ciao

bimiki said:
Anyway if you have problems or you are not sure on how to proceed ... go here and read, is a very nice guide for Polaris
http://forum.xda-developers.com/showthread.php?t=381600
ciao ciao
Click to expand...
Click to collapse
Thanks, i know that tread. I've spend lots of ours reading and searching before flashing because i want to prepare myself. I don't want to be some idiot that starts flashing before he knows what he is doing you know.
By the way. I downloaded the rom again to be really sure i have the right file.
Again thanks for your help!

Yeeeeeeeeeeeaaaaaaaaaaaaaaaaah, I succeeded!
Thanks to you all! Long live xda!
Greetz.

Cannot connect with USB

Hi all
I have installed Dutty's ROM, and sometimes its unresponsive, when i click on the screen. So I wish to flash the ROM again and install the Windows Mobile 6.5. However, I cannot connect my device through USB, its not even detecting it.
What can I do to fix this problem?
Thanks a lot for your help and advice

jmonfu said:
Hi all
I have installed Dutty's ROM, and sometimes its unresponsive, when i click on the screen. So I wish to flash the ROM again and install the Windows Mobile 6.5. However, I cannot connect my device through USB, its not even detecting it.
What can I do to fix this problem?
Thanks a lot for your help and advice
Click to expand...
Click to collapse
What have you tried? Have you pulled your USB out of Phone and PC?
Have you soft reset your phone?
Put a bit more detail and we can help

ok so first i used the Unsigned_HardSPL_for_Blackstone_OliNex with ActiveSync and that worked fine. Then I moved the BLACIMG.nbh into the BlackstoneRUUWrapper to install the new ROM, and that worked fine too, 100%. Then I removed the USB cable and restarted the device. Now I am noticing that the device is working properly for maybe 10 secs, but then it freezez, and I have to resett it

jmonfu said:
ok so first i used the Unsigned_HardSPL_for_Blackstone_OliNex with ActiveSync and that worked fine. Then I moved the BLACIMG.nbh into the BlackstoneRUUWrapper to install the new ROM, and that worked fine too, 100%. Then I removed the USB cable and restarted the device. Now I am noticing that the device is working properly for maybe 10 secs, but then it freezez, and I have to resett it
Click to expand...
Click to collapse
Usually after a flash its recommended to Hard reset atleast 2 times did you do that?
Did you follow crackwhores instructions completely?
When I have flashed I wait till the finish screen on pc shows the phone should shut down and restart itself thats when i disconnect USB
when phone shows welcome screen i pull battery out and hard reset

oh so when everything is finished, and there is the FINISH screen on the PC, you should take the battery out and hard reset! Did not do this. New to all this. Managed to connect my device again by USB, and putting Miri's WM 6.5. Will hard reset after that

jmonfu said:
oh so when everything is finished, and there is the FINISH screen on the PC, you should take the battery out and hard reset! Did not do this. New to all this. Managed to connect my device again by USB, and putting Miri's WM 6.5. Will hard reset after that
Click to expand...
Click to collapse
Cool
have a reread of crackwhore thread its very helpful

thanks mate

jmonfu said:
thanks mate
Click to expand...
Click to collapse
No Problem
I have been help all through this site
its great bunch of people

Hi Ozmoran
I still have problems with my device, first it works for a number of minutes, then freezes, then after around 5 minutes comes back to normal. And secondly, cannot get my reception to work, ie cannot receive calls and messages at the moment. Its asking me, "Do you want to turn the phone on?" and when i click on yes, nothing happens.
This is the exact procedure I am following:-
1) Unsigned_HardSPL_for_Blackstone_OliNex. After 100%, I click on Finish on the PC, and remove USB cable. I remove the battery off and on again and I hard reset (from the small button on the back right?)
2) I do the same procedure for BLACIMG.nbh and that works fine too, 100% finished.
After this, first I notice that the colours are not vivid colours, but like an old PC colours, so i turn off and on the device (from the button at the top). Then after loading, its asking me to click on the "+" to align the screen, which I do, follow the next screen, and the ROM is working.
However as I said, sometimes its unresponsive, and cannot get reception from my mobile provider.
What am I doing wrong?
Thanks a lot for your help, I am a complete newbie

ok found this thread
http://forum.xda-developers.com/showthread.php?t=505377
will follow it this eve and see what happens

Reason you are experiencing this discolourization and not reception/signal is due to you most likely not following flashing procedure properly and possibly using wrong HSPL before flashing rom.
You need to use HSPL 1.56 to flash a 1.56+ based rom. Any previous version you need to use 1.14 HSPL.
I notice you have already found cRaCKwHoRe's guide. If you follow it, you will be fine. If you get stuck, just post a query inhis thread and someone will help you!!

great
i downloaded everything from that post and will do it this evening since the phone is at home.
Hopefully I can use my phone again very soon

If you also read this section in the wiki, it refers to your greenish discolourization as well and offers assistance. Though if you follow cRaCKwHoRe's guide you'll be fine

thanks guys
any preference on any particular ROMS that are popular?
I was going to try Miri's WM6.5

jmonfu said:
thanks guys
any preference on any particular ROMS that are popular?
I was going to try Miri's WM6.5
Click to expand...
Click to collapse
Good rom to start with if you want wm6.5, would also try EnergyROM HD by NRGZ28. Both excellent roms. As for wm6.1, IMHO Duttys is the best.
For you, I would try each and make your own opinion

Thanks
Will try Miri than and see how it goes
Last question (hopefully), once I will install the Hard SPL, there is no need to install it again if I want to flash the ROM again right? Just install the ROM i want
Thanks a lot for all your help!

jmonfu said:
Thanks
Will try Miri than and see how it goes
Last question (hopefully), once I will install the Hard SPL, there is no need to install it again if I want to flash the ROM again right? Just install the ROM i want
Thanks a lot for all your help!
Click to expand...
Click to collapse
Yes, once you install HSPL its permanent and you have no need to re-install it. You can restore default SPL at a later stage if you want.
USPL is temporary and needs to be re-used before every flash to new radio or rom
If I were you, I'd read up on both USPL & HSPL in the wiki for a better understanding before you jump in head first!!

yeah i will read more about it, just wanted to experiment.
Thanks for all your help!

Hey guys
managed to do it! Flashed the ROM and working perfectly now!
Thanks a lot for your help and time

Please help - bricked XDA Orbit II

Hi, first post on the forum so please be gentle with me....
I have an XDA Orbit 2 which was until last Thursday working fine with the last official upgrade from O2 (Win 6.1, no idea about all the other stuff).
Whilst using the phone last week it suddenly died in the middle of a conversation. It wouldn't power on at all. I took out the battery, waited a couple of minutes, put the battery back in and switched it on. All that happened was the phone displayed the 4 colour screen with "POLA200 SPL-3.13.0000 CPLD-2" in the red section and "Serial" in the white. I repeated the battery removal exercise a few times, waiting for increasing lengths of time but nothing changed.
I had a fairly long search through the forum and have tried for a few hours now going through the various fixes suggested but I am getting nowhere.
It won't hard reset, all that happens is the message "No Image Found" appears for a very short time and I then get stuck on the 4 coloured screen with the message above.
The same thing happens if I try just putting the thing in bootloader mode.
I can't use any of the official O2 rom upgrades as the phone because all the PCs I've tried connecting to it won't recognise it over a USB link.
I've tried connecting to it using mtty, again on several PCs, but I just get a message "USB port can not open". Just in case I've uninstalled Activesync on one PC and got the same answer.
The "how to flash you polaris using the microSD card" originally looked useful but I have some problems with it.
The first is that I need HardSPL installing on the device, which I can't do because I can't get to it.
The second will be down to me not knowing where to look, but I can't find a ROM to download and copy to the microSD card as POLAIMG.nbh. I did manage to find a Win6.5 one (the HTC Polaris - PDaviet rom wm6.5 manilla 2d (core 23004) by tranminhman one) which I thought I'd try. I guess the idea was that if I could just get something working I could always reflash it again with a different ROM or maybe apply the o2 upgrade. Unfortunately the image was password protected and I couldn't find the password in the thread.
I'm kind of at a loss now so any help would be appreciated.
Cheers

Hey,
Sorry i can't help much you'll need to do a lot of reading and troubleshooting...usually it's the onyl way to solve it by trying all options.
I'm just posting this message to bump it up in this forum, but more importantly you should be posting in the Iolite section for help with that specific device especially if you're trying other ROMs.
Also if it died on you and you haven't begun to flash it, can't you send it to the service for them to fix it for you? That way you can rule out any hardware malfunction.
Best of luck!
Alan

Did you do soft reset

alanazar said:
Hey,
Sorry i can't help much you'll need to do a lot of reading and troubleshooting...usually it's the onyl way to solve it by trying all options.
I'm just posting this message to bump it up in this forum, but more importantly you should be posting in the Iolite section for help with that specific device especially if you're trying other ROMs.
Also if it died on you and you haven't begun to flash it, can't you send it to the service for them to fix it for you? That way you can rule out any hardware malfunction.
Best of luck!
Alan
Click to expand...
Click to collapse
Bit in bold er... cant quite understand why in iolite section as the xda orbit 2 is the rebrand htc touch cruise => htc touch find. Its in the right place.
On the side of what to do i the ony thing i can think of would be mtty and if that didnt work then try to reflash the official o2 6.1 release and see what happens when you try to do it.
You cant try to install any 3rd party roms they jsut wont flash as you dont have hard spl installed and cant do that until you have it running again.
Try the above and see what happens...

Hi Nik
I have tried just about every kind of reset, nothing has worked.

Hi Alan
If I can't get it sorted any other way I'll probably send it off somewhere but I'd like to have a go at fixing it myself. It will at least be a bit of fun!
I take then that I've posted this in the wrong forum. Oops, apologies.
Jon

You have not posted in the wrong forum look at my signature!

Hi jon,
Conclusion from post 1,
1) Uncompleted flash with new ROM or hardware problem (half way die)
2) Unsuccessful flash Hard SPL (cannot see Olinex 2.2 wording during bootloader)
3) Your PC & PDA fail to connect via USB (serial wording appear during bootloader)
Try this method,
1) Get shipped ROM from HTC web site, key in your country & serial behind battery
1a) Extract shipped ROM by WinRAR , take RUU Signed.nbh
2) Rename to POLAIMG.nbh put inside SD card, "flash using SD card"
3) Make sure your battery power more than 50% cause it take about 2 hours
Good luck, my friend
[Your request Password: TranMinhMan]

Nik Ahmad said:
Hi jon,
Conclusion from post 1,
1) Uncompleted flash with new ROM or hardware problem (half way die)
2) Unsuccessful flash Hard SPL (cannot see Olinex 2.2 wording during bootloader)
3) Your PC & PDA fail to connect via USB (serial wording appear during bootloader)
Try this method,
1) Get shipped ROM from HTC web site, key in your country & serial behind battery
2) Rename to POLAIMG.nbh put inside SD card, "flash using SD card"
3) Make sure your battery power more than 50% cause it take about 2 hours
Good luck, my friend
[Your request Password: TranMinhMan]
Click to expand...
Click to collapse
Thanks Nik
I've had a bit of a look round the HTC site and couldn't see a ROM to download so I've asked their technical support people if there's anywhere to download it.
Fingers crossed they'll help.
Jon

jonfsharp said:
Thanks Nik
I've had a bit of a look round the HTC site and couldn't see a ROM to download so I've asked their technical support people if there's anywhere to download it.
Fingers crossed they'll help.
Jon
Click to expand...
Click to collapse
Try to get official HTC ROM here, Select WWE (405) CID_001 for your country.
Good luck my friend

have u tried this?...
turn off, pull out the battery, then put it back, charge ur phone till the battery indicators shows green (which mean it's already fully charged) then... power on ur device.
it looks like a dumb suggestion , but... i have had a same situation
(HTC KAISER, not Polaris).
if it doesn't work, then try to upgrade with a POLAIMG.nbh (take it from official HTC ROM)
in a 2G FAT32 microSD root directory.

Nik Ahmad said:
Try to get official HTC ROM here, Select WWE (405) CID_001 for your country.
Good luck my friend
Click to expand...
Click to collapse
Thanks Nik
Much appreciated.
Downloaded the ROM as suggested, unzipped to the SD card, renamed the image to POLAIMG.nbh, stuck it in the phone and things got slightly more interesting.
In bootloader mode I now get a bit further. I get a grey screen which says "Loading ..." then "Checking...." then "00028002 Not allow". It then goes back to the four coloured screen as before.
However, does the fact that it is trying to read something mean that I have just got the wrong file?
I'll try a few more and see what happens.
Thanks once again, your help is greatly appreciated.
Jon

Hi oza
Yep tried all the battery pulling out stuff but got nowhere.
The ROM thing on the SD card gets further. I extracted the ROM from the official O2 upgrade, stuck it on the card and renamed it POLAIMG.nbh.
If I put the phone in Bootloader mode I now get even further than before. I get a grey screen with:-
POLAIMG.nbh -
RADIO_V2 -
BOOTLOADER -
SPLASH1 -
OS -
Press power button to start update image
Press action button to cancel update image
If I press the power button
I get an "Update In Progress" message and a progress bar.
After about 4 minutes I get a full progress bar and :-
POLAIMG.nbh - OK
RADIO_V2 - OK
BOOTLOADER - OK
SPLASH1 - OK
OS - OK
Update complete
UPDATE SUCCESS
And that's as far as I've got so far.
If I take the SD card out and try a hard reset I just get stuck on the 4 coloured screen I got before, but with no No Image Found message.
I get the same thing with bootloader mode and when I just remove the battery.
If I put the SD card back in I can go through the update process but I can't do anything
else.
So, have I actually made any progress? I'm not actually sure what I have updated and what state the phone is in at the moment. Is the fact that this didn't work an indication of a hardware failure and I should send it off somewhere.
Any advice on next steps would be good.
Jon

what is ur bootloader screen says now?
IPL...
SPL...

Before you can be helped you need to supply this information:
What rom were you using when it died?
What SPL are you using?
You used MITTY and fixes so I assume you're not a complete nunce and have hard spl on your phone, so on that assumption and ONLY if you have hard spl on your phone, try this:
If it isnt a hardware problem, then Its possible you have a dodgy radio flash issue - normally that would have been caused by a bad flash, but you indicated that this happened in use.
Provided it isnt a hardware, to fix this you need to either flash the radio (less reliable, but try it) rename the radio file to POLAIMG.nbh as directed before and stick on SD card.
The other thing to try is to flash a rom with a radio INCLUDED in it. Try and avoid fancy 6.5 beta roms and stick to 6.0 and 6.1 basic roms.
I believe Chavonbravo's VLIT roms come with the radio so try that. Its listed in the forum. I'm not providing links as I dont know what radio you were using and you really need to go for like to like or close. My preference is 1.59.44.02 radio rom if you find one.
Let us know how you do.
Lastly what radio and rom did you have?

Try this one M-AMINES if the radio you had was a 1.59.xx radio as it has the radio included.
if it was a 1.65.xx radio then try the VLIT naked rom.

oza_crazy said:
what is ur bootloader screen says now?
IPL...
SPL...
Click to expand...
Click to collapse
Hi Oza
Exactly the same as it did when it first broke. I get the 4 coloured screen with "POLA200 SPL-3.13.0000 CPLD-2" in the red section and "Serial" in the white.
No idea what the IPL is or was I'm afraid.
Jon

bally3 said:
Before you can be helped you need to supply this information:
What rom were you using when it died?
What SPL are you using?
You used MITTY and fixes so I assume you're not a complete nunce and have hard spl on your phone, so on that assumption and ONLY if you have hard spl on your phone, try this:
If it isnt a hardware problem, then Its possible you have a dodgy radio flash issue - normally that would have been caused by a bad flash, but you indicated that this happened in use.
Provided it isnt a hardware, to fix this you need to either flash the radio (less reliable, but try it) rename the radio file to POLAIMG.nbh as directed before and stick on SD card.
The other thing to try is to flash a rom with a radio INCLUDED in it. Try and avoid fancy 6.5 beta roms and stick to 6.0 and 6.1 basic roms.
I believe Chavonbravo's VLIT roms come with the radio so try that. Its listed in the forum. I'm not providing links as I dont know what radio you were using and you really need to go for like to like or close. My preference is 1.59.44.02 radio rom if you find one.
Let us know how you do.
Lastly what radio and rom did you have?
Click to expand...
Click to collapse
I've not been a big modifier in the past so it was just using the bog standard O2 software from the O2 website. The name of the file is "RUU_Polaris_O2_UK_3.13.206.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe" so I presume that there can be information gleaned about things like the SPL, ROM and radio versions?
Not a complete nunce, no, but so very far away from being comfortable with all this. This post was a result of a good few hours trawling through the forums looking for help. Anything I have done has been the result of a post on this site and I am very grateful that there are people willing to share their knowledge.
Anyway, as for hard spl, nope it isn't installed. I'd never needed anything like it before the phone died and now that it has died I can't get onto it to install anything.
Yes, this happened right in the middle of a conversation after a good year or so of normal day to day use. As I said, I haven't needed to make any changes to the phone so the only thing I've ever done is upgraded it with software from the O2 site.
I'm beginning to suspect that without Hard spl my options are very limited and pointing towards either sending it off for costly repairs or just binning the thing. I am probably wrong but I'm guessing that the fact that I don't have it installed is the reason why nothing is happening with the "Update in progress" stuff that is happening now.
Radio & ROM, as above. Whatever the O2 update provided. From the filename radio would be 1.59.42.15.
Many thanks
Jon

jonfsharp said:
I'm beginning to suspect that without Hard spl my options are very limited and pointing towards either sending it off for costly repairs or just binning the thing. I am probably wrong but I'm guessing that the fact that I don't have it installed is the reason why nothing is happening with the "Update in progress" stuff that is happening now.
Radio & ROM, as above. Whatever the O2 update provided. From the filename radio would be 1.59.42.15.
Many thanks
Jon
Click to expand...
Click to collapse
Well whatever you do dont bin it, we can always use it on the Android project if you decide to go that way.
Ok.. so lets see.. the phone is not picked up at all in windows?
If that is the case, if even a serial connection cant be made then theres issues. At this point, I would disregard all the other advice as it only applies to a hard spl device unfortunately. SD card flashing and all other radio rom flashing will only work with hard spl as far as I know - definitely safer for certain and you dont want to wreck a repairable device.
I take it, its not under warranty, for your mention of costly repair.
The important thing at this stage is a serial or usb connection from a Windows PC. I think I have heard of forcing this connection by opening the device but this would really be in the realms of profficient repairer or enthusiast.
I'll have a look but also do some searching yourself for making a connection to a Windows PC and forcing an SPL onto a phone.
I dont know whether anyone's ever managed to HardSPL a phone using a memory card? Just a thought...

Who would have known.. have a read of this and see if you can follow it up regarding the spl through sd card ..
http://forum.xda-developers.com/showpost.php?p=3273438&postcount=7

Can't Change My ROM

I have tried to change my ROM version on my phone, because I am tired of it freezing up and such. No matter how many times I try it it is never successful, the only ROM update I could do what the one from the Tmobile site...
Need help ASAP!!

What ROM are you trying to install? Have you flashed hardspl?
http://forum.xda-developers.com/showthread.php?t=653614

ddgarcia05 said:
What ROM are you trying to install? Have you flashed hardspl?
http://forum.xda-developers.com/showthread.php?t=653614
Click to expand...
Click to collapse
+1 on that. Follow the link and it will answer all of your questions and tell you all you need to know about flashing ROM's.
Welcome to XDA by the way

The evo, one on here by a guy named jason or josh, it doesn't matte which one i use... No success. It stays on the upload screen at 0%

LOVELYBLACKWOMAN84 said:
The evo, one on here by a guy named jason or josh, it doesn't matte which one i use... No success. It stays on the upload screen at 0%
Click to expand...
Click to collapse
you havent applied hspl correctly (or not at all).
Run HSPL3.exe change the dropdown to '2.08.hspl' and hit ok, when its done, flash your rom again.
If HSPL gives a timeout error, just run it again, no need to reset the phone which should be on the stripey screen by then. If THAt fails, keep trying different usb ports.