I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.
diacronic said:
I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.
Click to expand...
Click to collapse
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?
dougstoner said:
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?
Click to expand...
Click to collapse
ok that was disabled. I enabled it, same problem.
Seems to be running Open Touch 5.0.
Just bought it off ebay.
Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.
If it had OpenTouch 5.0, it might have already been HardSPLed. Either way, I'm glad you found the answer yourself. It shows that you actually did your research.
diacronic said:
Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.
Click to expand...
Click to collapse
That's really not a bad idea. I know I was EXTREMELY confused the first time I flashed my rom. It took me a lot of reading to finally understand RUU stood for rom update utility. You do know for some roms, it's not necessary to hard spl. I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?
There's a walkthrough by me somewhere in the forums.
dougstoner said:
.... I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?
Click to expand...
Click to collapse
Just downloaded ivan's kitchen , but I'm having problems getting it to run. Going to use that to probably make my own and get used to the programs that are out there.
Related
I think my 8125 is bricked. I've never had a problem flashing roms until yesterday I tried Farias Kitchen ROM. I flashing went through ok like normal, but when it restarted, it gets a little bit after the second splash screen. The green windows mobile with farias names at the bottom loads, then the topbar of windows mobile loads with the start button, but then nothing else.
I've tried reflashing it in forced bootload mode as well as doing a hard reset. no luck. The update utility keeps telling me that it is an invalid update tool, please get a newer update utility. I've tried taking the battery out for a while and from there doing forced bootloader. Still no luck
Any suggestions?
daddy_yankee1980 said:
I think my 8125 is bricked. I've never had a problem flashing roms until yesterday I tried Farias Kitchen ROM. I flashing went through ok like normal, but when it restarted, it gets a little bit after the second splash screen. The green windows mobile with farias names at the bottom loads, then the topbar of windows mobile loads with the start button, but then nothing else.
I've tried reflashing it in forced bootload mode as well as doing a hard reset. no luck. The update utility keeps telling me that it is an invalid update tool, please get a newer update utility. I've tried taking the battery out for a while and from there doing forced bootloader. Still no luck
Any suggestions?
Click to expand...
Click to collapse
What are you trying to re-flash it with in the BL?
You should be able to flash the loverom without a problem.
TaurusBullba said:
What are you trying to re-flash it with in the BL?
You should be able to flash the loverom without a problem.
Click to expand...
Click to collapse
Thanks, I'm gonna download it right now and try it. What is different about this ROM than any of the cooked roms I have already as well as and official one. All of them in past have worked for me without a problem until now.
daddy_yankee1980 said:
Thanks, I'm gonna download it right now and try it. What is different about this ROM than any of the cooked roms I have already as well as and official one. All of them in past have worked for me without a problem until now.
Click to expand...
Click to collapse
Well, it sounds like it may have just been a bad casserole you cooked.
But, you could probably even re-flash using your carrier ROM. This one is just a fool-proof way to get you back on your feet. This ROM is just G3/G4 independent and doesn't include a radio, ipl/spl, or extrom.
TaurusBullba said:
Well, it sounds like it may have just been a bad casserole you cooked.
But, you could probably even re-flash using your carrier ROM. This one is just a fool-proof way to get you back on your feet. This ROM is just G3/G4 independent and doesn't include a radio, ipl/spl, or extrom.
Click to expand...
Click to collapse
Nope, just tried flashing that ROM mentioned above, and still the same answer. It keeps telling me that I need to get a new update utility. That is so weird because I never had that problem. I have already tried flashing the official as well with no luck.
daddy_yankee1980 said:
Nope, just tried flashing that ROM mentioned above, and still the same answer. It keeps telling me that I need to get a new update utility. That is so weird because I never had that problem. I have already tried flashing the official as well with no luck.
Click to expand...
Click to collapse
So, how exactly are you updating it in the bootloader? (just curious)
TaurusBullba said:
So, how exactly are you updating it in the bootloader? (just curious)
Click to expand...
Click to collapse
I put the phone in bootload mode by pressing and holding the camera button, then resetting by pushing the reset hole which then loads it to a colorful screen which I assume is the bootloader screen. Then I just connect it and try to flash it using one of the ROMS i have. Thats how I did it the past couple of times.
What upgrade utility are you using? You might wanna try the one attached! It is the 'NO_ID' version and up to now it flashed everything! Simply extract the zip file to a folder on your desktop, then copy your nbf file in to it too and run the "ROMUpdateUtility_Wizard_NoID.exe"
hello
im having the same problem, i just tried it, didnt work for me
Did you CID unlock your phone before trying to flash it? Did you also try to flash it with your shipped ROM again?
My phone also appears to be bricked. It locked at 99%, and after trying the steps indicated in the core2.0 installer, it closed, and I'm having difficulty figuring out the next step. As is, I get ERROR [264] CONNECTION. Is there a way to get the phone functional enough to load an OS? I've been searching these forums for about 30 minutes and haven't found what I'm looking for. There should be a recovery wiki.
I have the same problem...
Junner2003 said:
Did you CID unlock your phone before trying to flash it? Did you also try to flash it with your shipped ROM again?
Click to expand...
Click to collapse
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
alissonguedes said:
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
Click to expand...
Click to collapse
First thing you could try is to flash it with your shipped ROM again (the one you had on there originally). If that does not work you might want to search the forum for the LOVE ROM ??? I never tried that one but people say it should worke on any device (G3 /G4).
I thing more
alissonguedes said:
Hi Junner, i have the same problem too...i did a unlock CID before i try to put the core 2...but after the boot its freeze on splash screen and nothing happend...what can i do? help me please...tks a lot.
Click to expand...
Click to collapse
Every rom that i put in the phone is the same...always freeze on the splash screen...
Junner2003 said:
First thing you could try is to flash it with your shipped ROM again (the one you had on there originally). If that does not work you might want to search the forum for the LOVE ROM ??? I never tried that one but people say it should worke on any device (G3 /G4).
Click to expand...
Click to collapse
I try LOVE too and nothing...the phone is G3 with ipl/spl 1.01
alissonguedes said:
I try LOVE too and nothing...the phone is G3 with ipl/spl 1.01
Click to expand...
Click to collapse
Did you try already to flash your shipped ROM?
I dont have one
Junner2003 said:
Did you try already to flash your shipped ROM?
Click to expand...
Click to collapse
I dont have one...
You can download the Official ROM directly from HTC's site.
alissonguedes said:
I dont have one...
Click to expand...
Click to collapse
Yeah, download that one if Cingular was the original one! If not: let me know what was on there originally!
Junner2003 said:
Yeah, download that one if Cingular was the original one! If not: let me know what was on there originally!
Click to expand...
Click to collapse
A mda vario tmobile from germany...
Alright, I've been in the process of trying to flash the ROM on my Vogue. I've been doing this over at PPCGeeks, and thought I try my luck for help with good people of xda.
Here is the comment I posted over there:
Alright, I've been reading and reading, can't find the answer, so hopefully someone can give me a detailed answer.
I ran the unlocker, to flash on OMJ Vogue ROM, with the Rev-A and GPS capabilities. During the process when the HTC ROM updater came on, the device wouldn't reconnect (I tried about 5 times, hard reset and starting from scratch). After waiting at the updater for about 10 minutes, I hit next and this time, as mentioned above, it said it was replacing the ROM image, but was blank. Meanwhile my phone is on the bootloader reading SPL-2.00.CoKe, after the updater went through the process, all of a few seconds, it performed the hard reset.
Now I have entered the bootloader to see SPL-2.31.CoKe, even after two hard resets, one being the auto, and one manual. The phone starts as it should, but once I turn it off, it won't power back on. I believe I saw a fix for this, but can't remember.
My biggest questions are, what can I do now? Is this normal, and I should continue to flash from here?
Anybody here know what I can do?
Thanks!
Here is a good place to start:
http://forum.xda-developers.com/showthread.php?t=398571
or even the entire Vogue subforum.
Wow, thanks junior, this is a bit more of a specific question.
Sounds like you did not do the radio upgrade that is necessary. I agree though, posting in a forum that is specific to your device/problem is best. And, I know for a fact, that there are numerous threads/posts on this subject at ppcgeeks.
try the ffg
http://forum.xda-developers.com/showthread.php?t=394039
or
http://forum.xda-developers.com/showthread.php?t=387960
colonel00 said:
Sounds like you did not do the radio upgrade that is necessary. I agree though, posting in a forum that is specific to your device/problem is best. And, I know for a fact, that there are numerous threads/posts on this subject at ppcgeeks.
Click to expand...
Click to collapse
That's the problem though, I couldn't even get to the radio part yet. I think the issue was with the reconnecting the device to ActiveSync, during the unlocking proccess?
Now, is there a way to complete this step through an SD card. Using ImCokeMan's 2.31 Vogue unlocker.
I went through the exact same thing, they're right about the radio
Use the official leaked sprint rom, it's an exe. Run it and flash. Then, DON'T LET IT BOOT UP!!! Immieaditely put it back in CoKe, and flash your desired ROM. When the vogue first starts up, it should say under those numbers that pop up R 3.37.15
xd1936 said:
I went through the exact same thing, they're right about the radio
Use the official leaked sprint rom, it's an exe. Run it and flash. Then, DON'T LET IT BOOT UP!!! Immieaditely put it back in CoKe, and flash your desired ROM. When the vogue first starts up, it should say under those numbers that pop up R 3.37.15
Click to expand...
Click to collapse
Awesome, I'm glad someone here has knowledge on this ! Ok, but from this point, the device has been hard reset, still with it showing the SPL as 2.31.CoKe, so from here should I run the Radio exe, it seems that I never finished the first step, which is completeing the unlocker tool, is this normal?
Hi all as you can see form the title im new and would like to flash my wing, I just got a bricked wing, replaced LCD and its working now but slow as hell Ive already clocked it to 247 would not go any higher screen would flicker, now i want to flash in hopes that i can clock it higher, Ive been reading this guide
A Herald's Guide to Flashing Aserg, USPL and HARD-SPL need a few answers on things that I'm not to clear on, What is SPL, and how can i find out if i have 4.0 or higher. and can i put any NBH OS file in that RUU folder, and the only program i need to flash is ActiveSync, sound very easy compared to Moto phones.
and one last thing is there any other flashing tutorials out there what i can read up on before i do my first flash,
any help would be greatly appreciated
you should use USPL or HardSPL to flash. SPL contains the cid lock and other stuff. USPL temporarily bypasses the lock and HardSPL overwrites it.
you can put any .nbh in the ruu as long as it's specifically made for herald.
to check your spl version, go into bootloader by soft resetting while holding the camera key.
Hi and thanks for the quick reply all went well with my flash, but for some reason i cant over clock past 247 thning start flickering, thank you
fzzyrn said:
you should use USPL or HardSPL to flash. SPL contains the cid lock and other stuff. USPL temporarily bypasses the lock and HardSPL overwrites it.
you can put any .nbh in the ruu as long as it's specifically made for herald.
to check your spl version, go into bootloader by soft resetting while holding the camera key.
Click to expand...
Click to collapse
heres the quick answer for you, just the the xda-wiki tab and find the herald option and just read on how to flash. WARNING, read everything before you flash and have fun!!! Good Luck
heres the quick answer for you, just use the xda-wiki tab and find the herald option and just read on how to flash. WARNING, read everything before you flash and have fun!!! Good Luck
first flash
Hi y'all my first flash went with out a flaw yeah i did read all over and over and read it all again, I used ttran001 V.3 biggy the only had part was setting around network wizard to setup IE and Opera, but thats cuz i only have T-web 5.99 plan, just wanted say yeeehaw I'm a happy camper now let the tweaking begin, off to find Vioce Command
c1bear said:
Hi y'all my first flash went with out a flaw yeah i did read all over and over and read it all again, I used ttran001 V.3 biggy the only had part was setting around network wizard to setup IE and Opera, but thats cuz i only have T-web 5.99 plan, just wanted say yeeehaw I'm a happy camper now let the tweaking begin, off to find Vioce Command
Click to expand...
Click to collapse
Here ya go...and welcome to xda! Get ready to spend an ungodly amount of time on your phone and on this site! lol.
dougstoner said:
Here ya go...and welcome to xda! Get ready to spend an ungodly amount of time on your phone and on this site! lol.
Click to expand...
Click to collapse
Aw thanks for the greet, and the file i all ready got it and installed it works great wonderful easy setup. yeah i know I'll be here much of my free time and even time at work now now that i have a screen that's big enough to see, had to put up my k1 moto up when got this wing with a bricked screen, i must say flashing these are alot essayer the moto,
Hi there guys,
i have i question/problem. Yesterday i wanted to flash my cruise with the dutch M-Amine-rom. I,ve done some flashes with my old wizard somewere like a year ago. Now I did read the polaris/cruise-wike, did succesfully install hardspl. I made an activesync-connection and brought my cruise in bootloader-mode. The problem (for me though) was that when te cruise comes in bootloader mode there was no more activesync-connection, there seems to be an usb-connection because in the tree-collored screen you can see 'usb'. My problem is that de second RUU-screen makes you clear that there has to be an active-sync-connection before you can flash/update your rom. So i didn't flash because i was affraid to brick my phone. Maybe it's normal and maybe the RUU will make the connection when running but i cant find the answer to that question. Can somebody help me? Is it normal that there's no active-sync-connection in bootloader-mode? Will the RUU make the connection and flash the device anyway?
Second strange thing: i secondly decided to flash with my sd instead according the discribed procedure. I ended up with an os with the number 1.28.00.00!!! So just an older version of wm6!!?? Afterwards I flashed back the official rom (3.13...) without being in bootloader but with an activesync connection because i thought with the official one you don't have to be in bootloader. Is this a right thought?? Anyway, I succeeded to replace original rom.
Sweat on the forehead!
Thanks in advance for great help.
Greetz!
Should I remove this tread after getting an answer?
Relax Ron - you have nothing to fear
The behaviour you describe in bootloader mode is normal - no need for activesync. You can click OK and away you'll go!
As for flashing from your sd card, only thing I can think of is that you somehow renamed an old nbh file, rather than the M-Amine nbh you were trying to flash.
I've used both methods (the sd card way has got me out of trouble a couple of times) and they both work fine.
Good luck!
cr1960 said:
Relax Ron - you have nothing to fear
The behaviour you describe in bootloader mode is normal - no need for activesync. You can click OK and away you'll go!
As for flashing from your sd card, only thing I can think of is that you somehow renamed an old nbh file, rather than the M-Amine nbh you were trying to flash.
I've used both methods (the sd card way has got me out of trouble a couple of times) and they both work fine.
Good luck!
Click to expand...
Click to collapse
Thanks for quick reply. I'll try to flash this day. In fact i'm quit sure it was the right nbh-file, so that part of the problem still remains a mystery. You're a great help, Thank you.
Steady Ron said:
Thanks for quick reply. I'll try to flash this day. In fact i'm quit sure it was the right nbh-file, so that part of the problem still remains a mystery. You're a great help, Thank you.
Click to expand...
Click to collapse
Anyway if you have problems or you are not sure on how to proceed ... go here and read, is a very nice guide for Polaris
http://forum.xda-developers.com/showthread.php?t=381600
ciao ciao
bimiki said:
Anyway if you have problems or you are not sure on how to proceed ... go here and read, is a very nice guide for Polaris
http://forum.xda-developers.com/showthread.php?t=381600
ciao ciao
Click to expand...
Click to collapse
Thanks, i know that tread. I've spend lots of ours reading and searching before flashing because i want to prepare myself. I don't want to be some idiot that starts flashing before he knows what he is doing you know.
By the way. I downloaded the rom again to be really sure i have the right file.
Again thanks for your help!
Yeeeeeeeeeeeaaaaaaaaaaaaaaaaah, I succeeded!
Thanks to you all! Long live xda!
Greetz.
I have my Leo for 1 month. I flashed it (HSPL), installed cooked ROM and everything was fine. Than few days ago I installed new version of ROM and then the problems started...after every soft reset, ROM "restarted" (every tweak or installed program disappeared nad the phone looks like after installing new ROM) and after few resets it is stucked on the first screen (with numbers of radio etc.) and wont move further.
Can anyone help?
Dokturek said:
I have my Leo for 1 month. I flashed it (HSPL), installed cooked ROM and everything was fine. Than few days ago I installed new version of ROM and then the problems started...after every soft reset, ROM "restarted" (every tweak or installed program disappeared nad the phone looks like after installing new ROM) and after few resets it is stucked on the first screen (with numbers of radio etc.) and wont move further.
Can anyone help?
Click to expand...
Click to collapse
I know it's a pain, but have you tried a hard reset since this started? If not, give that a go. If you're still having problems then I'd recommend not using the ROM that you currently have.
have try flashing stock ROM from memory card? I guess it might work
johncmolyneux said:
I know it's a pain, but have you tried a hard reset since this started? If not, give that a go. If you're still having problems then I'd recommend not using the ROM that you currently have.
Click to expand...
Click to collapse
Yes, I did hard reset and it didnt help. Ofc I will use another ROM, but problem is that I cant do anything atm...the phone is simply stucked on the first screen and I cant even sync it to install another ROM :-/
baoma87 said:
have try flashing stock ROM from memory card? I guess it might work
Click to expand...
Click to collapse
Dokturek said:
Yes, I did hard reset and it didnt help. Ofc I will use another ROM, but problem is that I cant do anything atm...the phone is simply stucked on the first screen and I cant even sync it to install another ROM :-/
Click to expand...
Click to collapse
As above - that's probably your only way to resolve then.
baoma87 said:
have try flashing stock ROM from memory card? I guess it might work
Click to expand...
Click to collapse
Wish I could, but all I can see is only white logging screen...phone doesnt react at all.
You can flash from the memory card without the need to start the device up and connect to a PC. That's what he's suggesting. I don't know how to do this myself, having only done it via ActiveSync, so I can't tell you how to do it. I do know that you put a ROM image in the root of your storage card and reboot the device, but there's more to it than that. Have a look in the ROM forum for more advice (unless someone can help you here, of course).
johncmolyneux said:
As above - that's probably your only way to resolve then.
Click to expand...
Click to collapse
Will try it...as soon as I find the instruction
can you still get in to the bootloader, turn the phone on while holding volume down, get the 3 coloured screen, you can do the ROM and Radio from there
Dokturek said:
...the phone is simply stucked on the first screen and I cant even sync it to install another ROM :-/
Click to expand...
Click to collapse
you dont have to have a booted phone to flash roms over usb. Just boot to bootloader and wait for the 'serial' to change to 'usb' then run your flash.
Demon_man said:
can you still get in to the bootloader, turn the phone on while holding volume down, get the 3 coloured screen, you can do the ROM and Radio from there
Click to expand...
Click to collapse
samsamuel said:
you dont have to have a booted phone to flash roms over usb. Just boot to bootloader and wait for the 'serial' to change to 'usb' then run your flash.
Click to expand...
Click to collapse
Well you learn something new every day. I never knew that!
Great job! My Leo is alive again
Thx guys for helping me out.
johncmolyneux said:
Well you learn something new every day. I never knew that!
Click to expand...
Click to collapse
heh, every days a school day. It also has the added benefit (danger?) of bypassing the low battery warning, so if you REALLY can't wait for it to charge......
johncmolyneux said:
Well you learn something new every day. I never knew that!
Click to expand...
Click to collapse
I only learnt because changed ROM without Radio first haha, im always learning on here its great