Related
Hi there!
First, sorry for my worst english, but i'm not to perfect there ;-)
Now to my problem:
I've get the O2-XDA1 last week and there was only old ROM-versions installed.
So, i've seen the Radiostackupdate at the O2-Page and tryed to installed them.
But this update failed at 10% with the reason "Fehler beim beschreiben des Flashspeichers. Drücken Sie "OK" um neuzustarten"/"Failed writing into flashram - click "ok" to restart the device".
After the forced restart the update hangs at 1% - everytime!
Now no radiosoftware would detect - and the device didn't found the insert accu.
Well, then i've done a flash from CE via wallaby bootloader, but the problem stand by. :-(
I tested to flash the T-Mobile ROM, but that fails - after 1%, too.
After an idea I only copied the RSUpgrade.exe to the device and start them.
Result: The Tool starts without errors and after 1% the same message "Retry again".
So I think, the upgradetools try to delete the existing radiostack first - but there is no existing version at my ROM - and so the installation from the new Radiostack don't functionally.
What can I do to write the GSM-ROM to my XDA?
I'm using Windows XP (desktop) and i've only a USB-Cradle - no serial.
Thanks for reading and i hope for helpfully answers.
Greetings from Germany,
Christopher
Re: After Radiostackupdate - Device death. Reinstall RS fail
Cool you have the same problem as me, last week i tried to install new radiostack, and the result is like you. Help Us, There are a lot of us
@Long:
Well,
it's definitely not the way you would decide (for me not, too!), but after a week full of searching, trying and no results, i've send my XDA to the customer service.
It's fool: So many users had this problem, but no possibillity to re-alive the XDA exists... :-(
I hope that a failed radiostack didn't kill my warranty - that were fool... :-/
Well, I would see.
If there any possibilitys to rescue the X/MDA (1), so please post them! Now i can't do anything, but for example i need them in future.
Greets and thanks,
Christopher
Me too, I stand in the line with you.
The good news is that if a service center can repair it then it will not be long before one of the great guys here will figure it up, I can feel that they take these problems as a challenge that they must win.
All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin
YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...
Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!
Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.
Works great on all versions.
Great support from the boys from emeicheck
Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!
Yes you must do it all.
HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?
REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye
Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....
KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.
O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks
I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message
Did you unlock with imei-check? What is your model ID ARTExxxx ?
Yes i did. My Model ID is ARTE100
Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.
Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me
Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX
Hi everyone, I just recieved my brand new Diamond2 in Czech localisation (original from retailer) and after first boot I got this error:
Error
Install
\Windows\OpenCZ_Settings_Topaz.CAB
failed, code=0x80090006
I assume its the czech localisation but any advice? If I dont solve the problem, Ill send it on monday back
Regards
Pylorus
There are a couple of things you can do:
- Manually try to install it using the file explorer: \Windows\OpenCZ_Settings_Topac.CAB
- Make a hard-reset (hold Vol-up & Vol-Down and press the reset button under the battery case to see if it happens again.
Thx for swift reply ...
- I tried several hard resets and booting with / without SIM and or microSD - still the same error
- I managed to get the phone partially working, because you can move the error window aside and access the startmenu and open explorer. I executed the file manually, but got the error message: "The program cannot be installed because it is not digitally signed with a trusted certificate."
Unfortunately I can not access the phone via USB (first customisation hasnt finished and active sync does not open) and I'm afraid flashing the device with another ROM because of warranty
Any Idea how to tweak the phone to lower the phones security allowing installing not signed cabs?
Thx...
well if you get this error even after a hardreset, you should definitely send it back..
OliveJeans said:
well if you get this error even after a hardreset, you should definitely send it back..
Click to expand...
Click to collapse
I will ... but any idea how to lower phones security?
pylorus said:
Hi everyone, I just recieved my brand new Diamond2 in Czech localisation (original from retailer) and after first boot I got this error:
Error
Install
\Windows\OpenCZ_Settings_Topaz.CAB
failed, code=0x80090006
I assume its the czech localisation but any advice? If I dont solve the problem, Ill send it on monday back
Regards
Pylorus
Click to expand...
Click to collapse
My device from Czech too. I found this cab file in Windows folder, if you need it i'll upload it for you.
pylorus said:
Thx for swift reply ...
I executed the file manually, but got the error message: "The program cannot be installed because it is not digitally signed with a trusted certificate."
Any Idea how to tweak the phone to lower the phones security allowing installing not signed cabs?
Thx...
Click to expand...
Click to collapse
Try sdkcert. That should do what you want install it before installing your .cab what is needed
Problem solved - i sent the device back and the whole board was replaced - new IMEI, but now its working like a charm
for the future..I have had a same problem with my TD2..After few hours I found out that I could this error off in taskmanager. Then it worked.. It was just some czech layout for my topaz but I did not want it either.. So for those who will buy TD2 with this error and don´t want chzech langugage on it, just close it in taskmanager..
Hi guys. Long time lurker, first time poster.
I have just purchased the HD2 from eBay which Im using on the Vodafone network. I just tried upgrading the ROM to 1.72, but got the following error code: Error [294]: Invalid Vender ID. "Please check your update utility".
Is this because it it not a Vodafone specific handset? Is there any way to get around this or do I have to stick with my current ROM until HTC release a new one?
Also, is there anyway to revert back to the original youtube app? I stupidly downloaded the one from m.google.com and I find that it is a lot more annoying to use than the stock app.
Thanks in advance.
Edit - did a quick google search and found some threads here (even though the search function didnt pull anything up) and it seems as though I need to run/use HSPL. I have done an extensive search on that and I have no idea what it is or how to use it. Any chance someone can direct me to a link. Cheers.
heh I don't think much of your search skills then.....
go put the words
hspl leo hd2
into google, the top few hits will tell you everything. (they all point back here to xda dev, of course ... or youtube, courtesy of here.
Yes ... HTC have no public link for download (for a long time) but still should be possible to get a ROM download link from them ...
Have you tried to call (free number) HTC support of your region ?
http://www.htc.com/europe/contact/#phone
Have you tried to write by HTC Support site and ask for help?
http://www.htc.com/europe/contact/
Prepare the necessary information (serial number and IMEI) they are under the battery.
Contact HTC Support and tell us the outcome
If you want to share with others your OFFICIAL ROM here (give details and link)
Very quick upload and share : http://ge.tt/
ROM-s List
These ROM-s are not contained in: www.shipped-roms.com
HTC HD Mini_RUU_Photon_Vodafone_CH-DE_1.41.166.1_Radio_Signed_32.2807.05.06_0.63.05.41_Ship.exe
Switzerland German: 1.41.166.1, (10904) (Vodafone)
Release Date: 19-11-2010
Radio:0.63.05.41
--------------------------------------------------
RUU_Photon_hTC_Asia_HK_WWE_1.36.721.3_Radio_Signed _32.2803.05.06_0.63.05.36_Ship
Australia and Hong Kong ROM
Credits to M O R T Y (source)
--------------------------------------------------
RUU_Photon_HTC_ELL_1.36.482.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe
Greek official ROM Credits to kostas.seres (source)
--------------------------------------------------
World's Largest Collection of Shipped ROMS
http://shipped-roms.com/index.php?category=windows mobile&model=Photon
nfo
Feel free to try any ROM. in case you chose the wrong ROM installation will be stopped before start update, with this note: Invalid Vender ID 294 So it's safe to try.
Once the RUU is downloaded, launch the application on your PC and follow the instructions.
Before executing the ROM Upgrade Utility (RUU) make sure that:
Back up your data first before upgrading your device
The USB sync cable is connected to your device and PC. ActiveSync® or Windows Mobile Device Center will establish the connection between your device and PC.
All running applications on the device must been closed.
The battery level of the device is more then 50%.
The update will take up to 10 minutes.
DO NOT interrupt the update process, make/receive phone calls, disconnect the device from the PC, or press any buttons until the process has been completed.
You don't need SSPL !
Once installation completes, perform a hard reset of your device !
Two hard reset procedure:
Performing a factory reset using the settings menu
Go to Settings->Security->Factory reset.
Enter code “1234” and tap "Yes".
Performing a factory reset using phone buttons
-Turn phone power off.
-Press and hold the volume up and volume down buttons, while holding the volume buttons, press the power button shortly.(You will see a warning message on the screen,the operation will delete all your personal data and reset all settings to manufacturer defaults)
-Release the volume up and volume down buttons
-Press the volume up button to perform the reset.
Good idea but you can also find Photon shipped rom's here
of course, but unfortunately many ROM-s missing there
I used this Rome very fast and very stability
RUU_Photon_HTC_Europe_1.36.401.1_Radio_Signed_32.2 803.05.06_0.63.05.36_Ship.exe
if you like thes all rom hd mini
http://shipped-roms.com/index.php?category=windows mobile&model=Photon
Turkish Vodafone Rom ?
mustafa3m said:
Turkish Vodafone Rom ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1658977
bas.bas said:
http://forum.xda-developers.com/showthread.php?t=1658977
Click to expand...
Click to collapse
nothing out of here
mustafa3m said:
nothing out of here
Click to expand...
Click to collapse
I do not understand your sarcastic reply. My posts is meant to help. Instead of confusing remark, you can also respond rationally and helpful. Even if the answer is more detailed and then a little bit longer.
I need Turkish Vodafone ROM.There is nothing on the page as you throw.
Sorry for my english. Google translate
help me
arabic afficial rom
Where can i find Arabic afficial rom
Rom HTC HD Mini-RUU_Photon_HTC_ARA_1.36.415.4_Radio_Signed_32.2807 .05.06_0.63.05.41_Ship.exe
please help !:crying:
thank you very much for the greek rom
i dont know which rom i should download.here is my phone info:
imei:357215032650874
s/n:ht11fpz00376
p/n:99hkn001_00