Database Users

How to get your MSL code for SPrint Ppl

Here's how to get your MSL Unlock Code to edit the settings found under "Dialer Codes" (##code#)#) mentioned earlier.
0. Download GetSPC
http://www.5gmobile.us/mobilefiles/VX6800/GetSPC.zip (if this link doesn't work then try googling "GetSPC" or checking the download section)
Instructions:
1. Unzip and copy the extracted GetSPC folder (with all 3 files) to the storage card on your device.
2. Write down the ESN (Hex) number found behind the battery.
3. Power up and run the 'GetSPC(PPC 2003)' executable on your device.
4. In the 'Input' field, enter the ESN number you wrote down but be sure to use ALL CAPITOLS for the alpha values. (Ex: 123ABCD4, not 123abcd4)
5. Hit the 'Go' button. The value in the 'Output' field will be your "Unlock Code".

I was under the impression Titan/Mogul users didn't use the 2003... we used the other since we are running WM5 or higher

nursemm05 said:
I was under the impression Titan/Mogul users didn't use the 2003... we used the other since we are running WM5 or higher
Click to expand...
Click to collapse
This will run fine with WM5 and WM6 just run it off you phone i use this to find it my code and it will work trust me

I've already done it but I used the non 2003 one.

I just called *2 and asked for it. Simply said I was doing a software upgrade and needed it in case something went wrong.

Thanks a lot for this little program! I flashed the ROM on my mogul tonight, and didn't have the unlock code for the ESPT. I found this post and it worked perfectly on my sprint phone.
thanks!

mike-y said:
Thanks a lot for this little program! I flashed the ROM on my mogul tonight, and didn't have the unlock code for the ESPT. I found this post and it worked perfectly on my sprint phone.
thanks!
Click to expand...
Click to collapse
no problem

thanks for this

I'm actually glad you posted this. This would have helped me out a couple days ago when I was searching frantically for getSPC and couldn't remember the name. Did you know if you search for msl on here and ppcgeeks, you get no results? I eventually found it on some random forum in the middle of nowhere.

lol next time type in search MSL

meh, I really didn't think caps would make a difference. Ya live, ya learn

Yeah, I've done it both ways and I don't know which is quicker...
Just call and say you are dropping calls and want to reprogram your phone, they will start by telling you the MSL

Weird issue. I used GetSPC and got my MSL. It worked, i changed the RevA setting. I've upgraded to the 3.35 ROM. I've installed some other apps as well, but now my MSL isn't working. Getting the unlock code failed message? Anyone know what could be causing this?

I'm having a error message that pops up also. I did is instructed by the instructions and the error message is: Could not link to DLL. Anyone knows what causes this?

Very much appreicated
thanks for the help this actually works thanks!!!!!

glad to see this here ,a long time ago ,i found this everywhere,none.it is very useful ! thanks!

I't didn't work on my mogul. help.....

case SENSITIVE and unzip both the dll file and the exe to the same place
didn't it come with this in the zip?
"all you need to do is find your HEX ESN (under the battery on the sticker)
Extract to a folder on your device, then run the exe (not the 2003 one)
Put in your ESN and SHAZAM! theres ur MSL"

yea i did that. i got a 6 digit number and when i entered it it still said it wasnt the right unlock code.

Sprint MSL
Are they not all just "000000"

Help how can i change my MDN and MSID

I recently ported my number to sprint but before then I changed the rom on my vogue and now the code the customer rep gave me to change the MDN and MSID don't work. How can I change my MDN and MSID now?

I would flash it with the standard Sprint ROM, set up the phone settings, then flash the ROM back to whatever one you want.

No wait don't do that yet. Try this. Put this program and .dll file on your phone, in my documents perhaps. Now run GetSPC, enter the ESN hex # with any letters in CAPS and hit "go" and it should give you the spc. Now hit "talk" and put in ##******# (****** being the 6 digit # u get from GetSPC) and then go to edit. U should be able to change them from there

have you tried ##402535# and then edit?

I am having the same trouble
I am having the same trouble only I did not flash this phone I bought it this way and can't get in to set the msid. I cant even get the link with my computer to work but I did got the get spc files on my memory card and put it in and used astro an tryed to use it but it says it dont know what to do with am exe file. I have a htc touch 6900 and am stuck. I am such a newbie to phones so I am lost. I tried the ## number that the last guy posted . Any one have any other ideas.
Thanks

Randy Skidmore said:
I am having the same trouble only I did not flash this phone I bought it this way and can't get in to set the msid. I cant even get the link with my computer to work but I did got the get spc files on my memory card and put it in and used astro an tryed to use it but it says it dont know what to do with am exe file. I have a htc touch 6900 and am stuck. I am such a newbie to phones so I am lost. I tried the ## number that the last guy posted . Any one have any other ideas.
Thanks
Click to expand...
Click to collapse
The easiest way (at least for me) is to change all this stuff via WM. Just flash NFSFan's rom and change this via PST programming. Once you are done, flash back to Android.

I am running NFSFan's WM6.5 rom and am having the same issue. I cannot activate my phone because it will not take the "##*****#" code from sprint.
egzthunder1 recommended using PST programming but I am not sure what that means.

Jacob_newton said:
I am running NFSFan's WM6.5 rom and am having the same issue. I cannot activate my phone because it will not take the "##*****#" code from sprint.
egzthunder1 recommended using PST programming but I am not sure what that means.
Click to expand...
Click to collapse
If you are using NFS, you will find a folder under the Start Menu that is called Phone Codes. The dialer in NFS is skinned if memory serves me well, which means that the ##.. codes will not work.

ajones7279 said:
No wait don't do that yet. Try this. Put this program and .dll file on your phone, in my documents perhaps. Now run GetSPC, enter the ESN hex # with any letters in CAPS and hit "go" and it should give you the spc. Now hit "talk" and put in ##******# (****** being the 6 digit # u get from GetSPC) and then go to edit. U should be able to change them from there
Click to expand...
Click to collapse
When trying this, I get an error message that says that GetSPC.exe is not a valid Win32 application.

help Plz!!

im trying to flash my vogue to metropcs. i need help getting my spc/msl. i have searched everywhere in the forum and none of the methods seem to work. i have a sprint vogue with the official sprint rom installed. i bought the phone with a bad esn, but i used getspc to get the spc and i changed it to 000000.I then copied the esn of my old metro phone to the new vogue. right after i changed the esn i flashed a custom rom and tried to acess qpst to change the prl but the spc code 000000 wouldnt work. plz help!!!
P.S. i did not save the old spc or the old esn so i do not kno them

Go into your windows directory and locate a file called ppst.exe - run it. It won't appear to do anything but it actually generates a file in the root of your device called ppst58.log (at least that's what it is called on mine). If you look in that you will find your ESN MDM and SPC

i ran it and i only see ppst_keygen i dont see ppst58.log at all.

Check the root of the device above the windows directory the file you saw is in my windows directory, so I think you may be looking in the wrong place for it.

Change your phone number on NFSROM without having to reverse back to original ROM

I just want to share my experience with you. I had to change my phone number thus required a PRL reprogram. Because I am running the latest NFSROM with WM6.5, the instructions from Bell (in Canada) would not work. Someone on this forum said that he had to revert to the original firmware from Bell and then flash back. However, I found the way to do it with out reverting back or even a hard reset:
-Run PST program under \Windows
-Choose edit and Enter your lock code (call MST). This should have been given to you on the Bell instruction. I heard the Verizon one is 000000. For Spring you can find the getpst program.
-Change the MSID to your new phone number on the default Display page.
-Change the Mobile Directory Number (MDN) on the NAM page to your new number as well.
-Make sure that all other relate fields i.e. MINs, MMC, MNC, NMSI, IMSI ... is correct. They should be changed automatically after you change the MSID and the MDN number.
-Quit the program. It will ask if you want to reset the phone. Say yes.
At this point, your phone should work. However, the aGPS might not be working. You will get fix via the internal GPS but it will take a long time because aGPS is not working properly. If this happen, install the Bell Carrier Cab here: http://forum.xda-developers.com/showthread.php?p=3680840#post3680840
I imaging the procedure is very similar on other carriers.

You are a life saver! THANK YOU!

Thread Moved to General since it isn't development.

Bell Carrier cab link is not working.

smaugmra said:
Bell Carrier cab link is not working.
Click to expand...
Click to collapse
Updated to the new FAQ post. Thanks for letting me know.

[Q] Legal way to change SPC to 000000

hello
i have seen or read many article on how to change spc to 000000. i needed to download and tweak my phone but without changing my imei. it's as good as nothing.
Please which better way to edit my existing SPC number to 000000. i use MSL utility to know my SPC. but i am having problem changing it.
i also made use of CDMA but i was hanged on the Password (16 digit ) where my sprint number said ( check image below )
so how will i achieve this?
thanks

http://forum.xda-developers.com/showthread.php?t=2270191 should be what you are looking for...