Here's how to get your MSL Unlock Code to edit the settings found under "Dialer Codes" (##code#)#) mentioned earlier.
0. Download GetSPC
http://www.5gmobile.us/mobilefiles/VX6800/GetSPC.zip (if this link doesn't work then try googling "GetSPC" or checking the download section)
Instructions:
1. Unzip and copy the extracted GetSPC folder (with all 3 files) to the storage card on your device.
2. Write down the ESN (Hex) number found behind the battery.
3. Power up and run the 'GetSPC(PPC 2003)' executable on your device.
4. In the 'Input' field, enter the ESN number you wrote down but be sure to use ALL CAPITOLS for the alpha values. (Ex: 123ABCD4, not 123abcd4)
5. Hit the 'Go' button. The value in the 'Output' field will be your "Unlock Code".
I was under the impression Titan/Mogul users didn't use the 2003... we used the other since we are running WM5 or higher
nursemm05 said:
I was under the impression Titan/Mogul users didn't use the 2003... we used the other since we are running WM5 or higher
Click to expand...
Click to collapse
This will run fine with WM5 and WM6 just run it off you phone i use this to find it my code and it will work trust me
I've already done it but I used the non 2003 one.
I just called *2 and asked for it. Simply said I was doing a software upgrade and needed it in case something went wrong.
Thanks a lot for this little program! I flashed the ROM on my mogul tonight, and didn't have the unlock code for the ESPT. I found this post and it worked perfectly on my sprint phone.
thanks!
mike-y said:
Thanks a lot for this little program! I flashed the ROM on my mogul tonight, and didn't have the unlock code for the ESPT. I found this post and it worked perfectly on my sprint phone.
thanks!
Click to expand...
Click to collapse
no problem
thanks for this
I'm actually glad you posted this. This would have helped me out a couple days ago when I was searching frantically for getSPC and couldn't remember the name. Did you know if you search for msl on here and ppcgeeks, you get no results? I eventually found it on some random forum in the middle of nowhere.
lol next time type in search MSL
meh, I really didn't think caps would make a difference. Ya live, ya learn
Yeah, I've done it both ways and I don't know which is quicker...
Just call and say you are dropping calls and want to reprogram your phone, they will start by telling you the MSL
Weird issue. I used GetSPC and got my MSL. It worked, i changed the RevA setting. I've upgraded to the 3.35 ROM. I've installed some other apps as well, but now my MSL isn't working. Getting the unlock code failed message? Anyone know what could be causing this?
I'm having a error message that pops up also. I did is instructed by the instructions and the error message is: Could not link to DLL. Anyone knows what causes this?
Very much appreicated
thanks for the help this actually works thanks!!!!!
glad to see this here ,a long time ago ,i found this everywhere,none.it is very useful ! thanks!
I't didn't work on my mogul. help.....
case SENSITIVE and unzip both the dll file and the exe to the same place
didn't it come with this in the zip?
"all you need to do is find your HEX ESN (under the battery on the sticker)
Extract to a folder on your device, then run the exe (not the 2003 one)
Put in your ESN and SHAZAM! theres ur MSL"
yea i did that. i got a 6 digit number and when i entered it it still said it wasnt the right unlock code.
Sprint MSL
Are they not all just "000000"
Related
I recently ported my number to sprint but before then I changed the rom on my vogue and now the code the customer rep gave me to change the MDN and MSID don't work. How can I change my MDN and MSID now?
I would flash it with the standard Sprint ROM, set up the phone settings, then flash the ROM back to whatever one you want.
No wait don't do that yet. Try this. Put this program and .dll file on your phone, in my documents perhaps. Now run GetSPC, enter the ESN hex # with any letters in CAPS and hit "go" and it should give you the spc. Now hit "talk" and put in ##******# (****** being the 6 digit # u get from GetSPC) and then go to edit. U should be able to change them from there
have you tried ##402535# and then edit?
I am having the same trouble
I am having the same trouble only I did not flash this phone I bought it this way and can't get in to set the msid. I cant even get the link with my computer to work but I did got the get spc files on my memory card and put it in and used astro an tryed to use it but it says it dont know what to do with am exe file. I have a htc touch 6900 and am stuck. I am such a newbie to phones so I am lost. I tried the ## number that the last guy posted . Any one have any other ideas.
Thanks
Randy Skidmore said:
I am having the same trouble only I did not flash this phone I bought it this way and can't get in to set the msid. I cant even get the link with my computer to work but I did got the get spc files on my memory card and put it in and used astro an tryed to use it but it says it dont know what to do with am exe file. I have a htc touch 6900 and am stuck. I am such a newbie to phones so I am lost. I tried the ## number that the last guy posted . Any one have any other ideas.
Thanks
Click to expand...
Click to collapse
The easiest way (at least for me) is to change all this stuff via WM. Just flash NFSFan's rom and change this via PST programming. Once you are done, flash back to Android.
I am running NFSFan's WM6.5 rom and am having the same issue. I cannot activate my phone because it will not take the "##*****#" code from sprint.
egzthunder1 recommended using PST programming but I am not sure what that means.
Jacob_newton said:
I am running NFSFan's WM6.5 rom and am having the same issue. I cannot activate my phone because it will not take the "##*****#" code from sprint.
egzthunder1 recommended using PST programming but I am not sure what that means.
Click to expand...
Click to collapse
If you are using NFS, you will find a folder under the Start Menu that is called Phone Codes. The dialer in NFS is skinned if memory serves me well, which means that the ##.. codes will not work.
ajones7279 said:
No wait don't do that yet. Try this. Put this program and .dll file on your phone, in my documents perhaps. Now run GetSPC, enter the ESN hex # with any letters in CAPS and hit "go" and it should give you the spc. Now hit "talk" and put in ##******# (****** being the 6 digit # u get from GetSPC) and then go to edit. U should be able to change them from there
Click to expand...
Click to collapse
When trying this, I get an error message that says that GetSPC.exe is not a valid Win32 application.
I have a TITA100(Quest) that I am unable to launch EPST.exe on. I need to enter in the SPC # that I generated, but when I tap it to launch it reads EPST at the top for a sec but never leaves the file browser. I have also tried ##778(#), but the phone dials to a quest message service that says I am unable to dial this number.
I want to configure it for cricket.
Here is what I have done so far.....
Started with: Radio v. 1.39.00, ROM V. 2.13.656.2, Bootloader 1.2
Went to bootloader 2.40(via Hard-SPL-MF.exe), Scrosler's Titan ROM 3.26 w/touchflow. and then Radio 3.42.30.
Thank you in advance for any suggestions or solutions.
I got it to work after doing the using reedit to dump the code into a text file. I am not sure if that activated something, but it worked.
upsett3r said:
I got it to work after doing the using reedit to dump the code into a text file. I am not sure if that activated something, but it worked.
Click to expand...
Click to collapse
can you plz explain in detail what you did? i'd like to get into EPST again, so i can deactivate the GPS... it's killing battery... thanks in advance
phattboy29 said:
can you plz explain in detail what you did? i'd like to get into EPST again, so i can deactivate the GPS... it's killing battery... thanks in advance
Click to expand...
Click to collapse
So go to settings then phone the location and turn it to 911 only, GPS is now off. I don't think there are any gps settings in EPST but I could be wrong. And I run GPS all the time and have no problems with my battery life. I think you have other issues.
i may be wrong, but my Quest XV6800 didn't have the EPST.exe executable in it's original ROM (it's also in the Windows directry). i believe i flashed it to Alltel's stock ROM to get to it, and reset the SPC to 000000's. i couldn't get it into debug mode with the Quest ROM either
i have flashed many Moguls and the Quest ones are always the most peculiar...
i can't get epst to launch. i tried repeatedly starting it, using ##778 AND EPST.EXE in \Windows. I then soft restarted two or three times, trying both methods after each boot.
Is there any way to fix this? Otherwise, is there another way to enter the A KEY? I'm gettin an auth error when making calls.
rom 4.1.2 radio 3.42.50 pri 1.35_002
Installed DCD Verizon Carrier Cab from http://dcd1182.n715dp.com/index.php?dir=carriers and that allowed me to launch EPST via both methods.
Did not eliminate the need for a new A KEY.
Still kinda learning this stuff, I flashed everything OK, and now the GPS works with Garmin XT. This is on a "practice" phone, one that was kind of beatup that I could practice on before I flash my actual phone. I couldn't get EPST to work till I loaded the Verizon cab described below. Question is, will I have to load this cab every time I flash a new ROM, or does it have more to do with flashing a different radio ROM?
This is a great forum, I've learned a lot, and still learning. Thanks everyone.
Dale.
Some roms are carrier specific and have the info included. Most roms state that installing the carrier cab is necessary. This allows the same rom for all titans and then the user just adds carrier info. Just read the rom instruction better next time. Most list if the cab is needed.
I flashed my touch with the Sprint ROM on the HTC site. It updated the radio version to 3.42. I then flash the phone again to NFS V12. Now I try to enter the SPC code to change the PRL. I GET AN ERROR MESSAGE, stating the SPC is incorrect... What happened? Does the change of radio also mess with the SPC?
The Sprint update (probably the customizations) can change the SPC.
Use the program below on your phone to get the sprint spc code.
Forum link - post 7:
http://forum.xda-developers.com/showthread.php?t=361144
download link:
http://forum.xda-developers.com/attachment.php?attachmentid=78034&d=1206693473
Thanks, I found a post on PPCGEEKS to get the SPC code off the phone....
getspc is not working?
junk0 said:
The Sprint update (probably the customizations) can change the SPC.
Use the program below on your phone to get the sprint spc code.
>> I had to remove the links; this site wouldn't allow it even though the links are in the post I am answering too??<<<<
I followed the direction exactly as written. Got the getspc and put it on the phone; went to file explorer and opened it. Entered the MEID HEX number ( under the Battery ) all in Caps in the upper window and the number generated in the lower window when I enter it still gives me the wrong code entered warning??
The phone is a HTC Touch Pro and the carrier is Sprint. I bought it from a *&&^% on Ebay and when I told him I couldn't get into the SPC to setup the phone he wasn't very pleasant person.
In fact he claimed to be with sprint and said the phone is unlocked due to him flashing "MightyRom" on it?
I told him then wouldn't he had needed the spc to unlock the phone in the begining and what is the spc he used; no answer...
Any help is greatful and if I can't get it the spc I'll have to try to get my money back from this guy..
Click to expand...
Click to collapse
bullwhacker said:
junk0 said:
The Sprint update (probably the customizations) can change the SPC.
Use the program below on your phone to get the sprint spc code.
>> I had to remove the links; this site wouldn't allow it even though the links are in the post I am answering too??<<<<
I followed the direction exactly as written. Got the getspc and put it on the phone; went to file explorer and opened it. Entered the MEID HEX number ( under the Battery ) all in Caps in the upper window and the number generated in the lower window when I enter it still gives me the wrong code entered warning??
The phone is a HTC Touch Pro and the carrier is Sprint. I bought it from a *&&^% on Ebay and when I told him I couldn't get into the SPC to setup the phone he wasn't very pleasant person.
In fact he claimed to be with sprint and said the phone is unlocked due to him flashing "MightyRom" on it?
I told him then wouldn't he had needed the spc to unlock the phone in the begining and what is the spc he used; no answer...
Any help is greatful and if I can't get it the spc I'll have to try to get my money back from this guy..
Click to expand...
Click to collapse
Experienced the same same issue... Called Sprint. Told them the IOTA was not working and needed to perform manual setup. Sprint provided the codes which worked.
Click to expand...
Click to collapse
Thread moved to General.
@bullwhacker,
The SPC is not needed to unlock the device. The SPC or MSL is a number that you use to access the phone's programming (changing PRL, MIN, MSD, etc). If your device came with Mighty on it, it is unlocked as no custom roms can be flashed if it isn't.
I just want to share my experience with you. I had to change my phone number thus required a PRL reprogram. Because I am running the latest NFSROM with WM6.5, the instructions from Bell (in Canada) would not work. Someone on this forum said that he had to revert to the original firmware from Bell and then flash back. However, I found the way to do it with out reverting back or even a hard reset:
-Run PST program under \Windows
-Choose edit and Enter your lock code (call MST). This should have been given to you on the Bell instruction. I heard the Verizon one is 000000. For Spring you can find the getpst program.
-Change the MSID to your new phone number on the default Display page.
-Change the Mobile Directory Number (MDN) on the NAM page to your new number as well.
-Make sure that all other relate fields i.e. MINs, MMC, MNC, NMSI, IMSI ... is correct. They should be changed automatically after you change the MSID and the MDN number.
-Quit the program. It will ask if you want to reset the phone. Say yes.
At this point, your phone should work. However, the aGPS might not be working. You will get fix via the internal GPS but it will take a long time because aGPS is not working properly. If this happen, install the Bell Carrier Cab here: http://forum.xda-developers.com/showthread.php?p=3680840#post3680840
I imaging the procedure is very similar on other carriers.
You are a life saver! THANK YOU!
Thread Moved to General since it isn't development.
Bell Carrier cab link is not working.
smaugmra said:
Bell Carrier cab link is not working.
Click to expand...
Click to collapse
Updated to the new FAQ post. Thanks for letting me know.
Hey Everyone
I got WP7 on my HD2, everything works fine but MarketPlace, after two days trying Microsoft Chat finally I got my activation code, now everthing is working fine but I cant get any game or app from Marketplace, I get this error
"Can't get this information at the moment. Check again in a little while"
I have tried everything , reseting, changing time region and location but doesnt work, I tried to get apps from zune , when I get the apps from there it says everything is okay and your application will be installed soon, but nothing happens and nothing will be on the phone,
Help plz
I found the problem , I had to run HTC Connection setup, now everything works fine !
Hey there, how to run HTC connection setup and any advice to get the Activation Code ?
Was that before or after you put in the activation code?
Same Problem, tried both
trevspence said:
Was that before or after you put in the activation code?
Click to expand...
Click to collapse
I did both, before and after activation. Have the same message (in German) as stated above. Going to do some research on XDA but if anybody has an idea in between just let us know...
Edit: Ok, here are the tool and the description in how-to make the changes in the registry to change the HD2 to an HD7.
http://forum.xda-developers.com/showthread.php?t=907169
Do what it says in this topic
http://forum.xda-developers.com/showthread.php?t=912218
I did them all in order, then got my Activation Key and after activating I did the registry part again and ran the Connection Setup after everything and it did the job
Ah , btw, for Activation Code, u can get it via Microsoft Online Chat support,
http://support.microsoft.com/contactus/cu_sc_selector_chat?ws=support# First Chat system
but if ur outside of US u need to get a US IP using a VPN then check to see they cant see if ur behind proxies, if everything was okay go to the chat and tell them that u need a activation key they might ask u where u bought the phone just say something, if everything is okay they'd ask u for ur full name and your mobile number which ofc should be a US number,
When he asked me for that I answerd with 1 minutes delay coz I didnt know where to get a US number, then I said "is it necessary to have a US number coz I dont have it at the moment, can I give a international number like a UK number" then he said "I see, are u located in the UK" I was almost there I didnt want to ruin everything he was about to give me the coe, then I said "Not at the moment" , then hye said "Okay give me that UK number" and that did the trick and he gave me the code
But dont forget the best way is calling Microsoft support center in your country, and also for the chat way u need to try different operators coz most of them say u need to call support center and becareful remember the operator names and also use different name and email every time u go to the chat system , I gave them all fake email name and number
Error 80004005
Hi
I have done all the steps (haven't yet wiped the phone) got the activation key working but when I try to install any application I get : There is a problem completing your request. Try again later. Error code: 80004005 or I get: Can't get this information at the moment. Check again in a little while.
Nothing worked and I really running out of ideas. and I really want that phone to work, as WP7 is amazing!
Okay so you have activated ur Windows already , if so do the registry part again and see if it works or not !
I mean this part
1. Download XBMOD Deployer - CLICK HERE
2. In your Windows Development tools you installed earlier there should be an application called "Application Deployment". Connect your phone and open the program and install XBMODDeployer.xap. This extracts the provxml into /My Documents/My Ringtones/.
3. Download TouchXplorer - CLICK HERE - and install this .xap the same way as step 2.
4. Using TouchXplorer copy the file in /My Documents/My Ringtones/ to /Windows/ , overwrite if asked. - Give it time to open the Windows folder it takes a while.
5. Download HTC Connection Setup - CLICK HERE - same as above deploy to phone.
6. Open HTC Connection Setup and setup your network.
7. If your camera setting are not showing, in settings region, change display language to: United States. - this shouldnt affect anything if you are in a different country. Im from UK
Get the link from the topic
http://forum.xda-developers.com/showthread.php?t=912218