screen misalignment - 8525, TyTN, MDA Vario II, JasJam General

ive been having this strange problem with my touch screen for the past month or so. its been working just fine for the past year so this is a bit of a bother. anyways here goes:
the right half of my screen is properply aligned as in when im using the keyboard and pressing keys such as p or k or l they press fine but on the left half of the screen where keys such as A or S or D are present. when i press them they dont get pressed, instead the key next to them gets pressed for example if i press S then A shows up.
i tried aligning the screen it solves the problem but only untill the system reboot. when it goes haywire again like this. anyone else suffering from the same type of problem and know the solution to this?
thanks alot

d3aded said:
ive been having this strange problem with my touch screen for the past month or so. its been working just fine for the past year so this is a bit of a bother. anyways here goes:
the right half of my screen is properply aligned as in when im using the keyboard and pressing keys such as p or k or l they press fine but on the left half of the screen where keys such as A or S or D are present. when i press them they dont get pressed, instead the key next to them gets pressed for example if i press S then A shows up.
i tried aligning the screen it solves the problem but only untill the system reboot. when it goes haywire again like this. anyone else suffering from the same type of problem and know the solution to this?
thanks alot
Click to expand...
Click to collapse
Flash oem ATT rom, then flash new rom sir.. sounds like you have weird bug from your current rom... OR hardware issue.

be care dude!
if you use a magnet holder for your phone... it can crash your digitizer happands toa a friend with his wizard. his digitizer dont works exactly on the center...
be care.

joshkoss said:
Flash oem ATT rom, then flash new rom sir.. sounds like you have weird bug from your current rom... OR hardware issue.
Click to expand...
Click to collapse
Same opinion with Josh: Flash the ATT rom, and try another rom. Good luck!

ted presley said:
Same opinion with Josh: Flash the ATT rom, and try another rom. Good luck!
Click to expand...
Click to collapse
could you please point me to the att rom?

dude...
you have 73 posts... use the search tool
http://www.google.com/custom?hl=en&...m+Hermes&cx=000825531964825142534:cqr2sjirilw

lol i know. was just thinking if someone had experience in att roms they could tell me about that. no offense or anything

Related

[Q] Lockscreen responsiveness

After I press the end button to wake up my HD2, about half of the time my first attempt to swipe to unlock doesn't work. Works on the second try. Any idea what might be causing this? I'm using the Hyperdroid CM7 rom.
frsh90 said:
After I press the end button to wake up my HD2, about half of the time my first attempt to swipe to unlock doesn't work. Works on the second try. Any idea what might be causing this? I'm using the Hyperdroid CM7 rom.
Click to expand...
Click to collapse
signs of Your digitizer dying,
Thanks. Any other opinions? The screen works fine after I unlock it. Just want to make sure before I think about replacing the digitizer.
frsh90 said:
Thanks. Any other opinions? The screen works fine after I unlock it. Just want to make sure before I think about replacing the digitizer.
Click to expand...
Click to collapse
Hi
Thats how the problem starts and eventually ends with the Digitizer dying out completely, the reason i would suggest to replace it asap is either u can benifit from warranty or during a total emergency my HD2 gave up completely and i had to use a phone booth to make an urgent call,,,,
regds
PS: a lot of people face this issue
frsh90 said:
After I press the end button to wake up my HD2, about half of the time my first attempt to swipe to unlock doesn't work. Works on the second try. Any idea what might be causing this? I'm using the Hyperdroid CM7 rom.
Click to expand...
Click to collapse
tried a different rom ?
frsh90 said:
After I press the end button to wake up my HD2, about half of the time my first attempt to swipe to unlock doesn't work. Works on the second try. Any idea what might be causing this? I'm using the Hyperdroid CM7 rom.
Click to expand...
Click to collapse
Hi,
Before replacing your digitizer try reading this:
http://forum.xda-developers.com/showthread.php?t=898087
This is a well known "issue".
Just tried another rom and same result. Guess it is the digitizer
malybru said:
Hi,
Before replacing your digitizer try reading this:
http://forum.xda-developers.com/showthread.php?t=898087
This is a well known "issue".
Click to expand...
Click to collapse
I think that is a different issue.. ?
frsh90 said:
After I press the end button to wake up my HD2, about half of the time my first attempt to swipe to unlock doesn't work. Works on the second try. Any idea what might be causing this? I'm using the Hyperdroid CM7 rom.
Click to expand...
Click to collapse
Damn I have the same issue. Hope it's not the digitizer though .
Have you tried hitting the end button, waiting a few seconds then swiping? I don't think it's the digitizer personally. But I have the same issue, hit the end button, swipe right away, and it's a failed swipe. The second swipe always works.
I don't think it's the digitizer because if you unlock it, then lock it, then unlock it again right away, it will ALWAYS work on the first try. I think it's rom or android related.
albanianbrotha said:
Damn I have the same issue. Hope it's not the digitizer though .
Have you tried hitting the end button, waiting a few seconds then swiping? I don't think it's the digitizer personally. But I have the same issue, hit the end button, swipe right away, and it's a failed swipe. The second swipe always works.
I don't think it's the digitizer because if you unlock it, then lock it, then unlock it again right away, it will ALWAYS work on the first try. I think it's rom or android related.
Click to expand...
Click to collapse
I have pretty much the same exact thoughts but I have the same issue in other roms apparently. I'm not sure if I want to replace the digitizer for such a small issue, but it is pretty annoying.
GUYS the digitizer WILL eventually fail, these are the warning signs

[Q] Touchscreen not responding

So for some reason, the last few days the touchscreen on my phone was being super slow, and id have to turn off the screen, then turn it back on multiple times and keep trying to slide it to unlock. I dont know how this started. Ive been using the NexusHD2-Gingerbread V2.9.
Ive tried other ROMs and restored previous backups and nothing is working. The screen is still not responsive. Ive never had this happen before and not sure what else to do. Its just stuck on the lock screen but everything is unresponsive....any ideas???
AEBobby912 said:
So for some reason, the last few days the touchscreen on my phone was being super slow, and id have to turn off the screen, then turn it back on multiple times and keep trying to slide it to unlock. I dont know how this started. Ive been using the NexusHD2-Gingerbread V2.9.
Ive tried other ROMs and restored previous backups and nothing is working. The screen is still not responsive. Ive never had this happen before and not sure what else to do. Its just stuck on the lock screen but everything is unresponsive....any ideas???
Click to expand...
Click to collapse
Unfortunately, your touchscreen digitizer is dying. This is related to the hardkey malfunction. The only thing you can so now is flash back to stock WM Tom and send it back for repair. The phone's touchscreen need to be replaced.
Good luck,
Sent from my HTC HD2 using Tapatalk
Try to install everything from scratch and how it goes.
Sent from my HTC HD2 using XDA App
10507 said:
Unfortunately, your touchscreen digitizer is dying. This is related to the hardkey malfunction. The only thing you can so now is flash back to stock WM Tom and send it back for repair. The phone's touchscreen need to be replaced.
Good luck,
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Yeah thats what ive been reading, and right after i started this thread i was reading on another and read that you can fix it if you hold the power button down firmly (apparently the digitzier is right behind it)....that worked for me.
I think too much flashing and changing ROMS using the power button didnt help hehehe
AEBobby912 said:
Yeah thats what ive been reading, and right after i started this thread i was reading on another and read that you can fix it if you hold the power button down firmly (apparently the digitzier is right behind it)....that worked for me.
I think too much flashing and changing ROMS using the power button didnt help hehehe
Click to expand...
Click to collapse
Try using zMooth or Button Savior. This help your hardkey a lot. Since I have zMooth and Button Savior install on my phone, I no longer have to use the hardkey.
AEBobby912 said:
Yeah thats what ive been reading, and right after i started this thread i was reading on another and read that you can fix it if you hold the power button down firmly (apparently the digitzier is right behind it)....that worked for me.
I think too much flashing and changing ROMS using the power button didnt help hehehe
Click to expand...
Click to collapse
for how long (holding of power button) ????
{edit}
!!!!! FIND SOLUTION !!!!!
The digitiZer is under the hangup button. press the button bit hard till it nudges the digitiser a little. it worked for me.
(found it from : http://www.htcphones.net/htc-hd2-problems-with-touchscreen/ )
I'm so cool now!!
I have been living on this solution for almost 2 months now.
However I can't take it anymore not because I am lazy!
but because when sometimes you need to make a quick call or grab that
camera instantly I tend to waste a good 5 minutes trying to make that hardpress on the end key work with the digitizer cable.
My question is, would changing the digitizer work? or is it something else?
Ever noticed that T-Mobile HD2 has soldered digitizer connection to the LCD vs. flex-cable socket in standard Leo?

Is my touchscreen dieing?

I was running an older Paramid version of dunphp's ROM, and right before swtching the ROM my touch screen start to not function. I could not pull the ring up to unlock the screen. I rebooted multiple times. Cleared Dalvik and fixed permissions. It finally worked after attemptiing to unlock it for what seem like abother 500 times.
I was going to change over to his latest Deisre HD ROM anyway. So I did a Task 29, and cleaned and reinstalled everything from scratch. It worked perfectly for about 5 days. Now I am getting the same issue with my touch screen. It just seems to go out. Is this typically what happens when it's about to die?
Never mind. I Task29, and flashed a Windows Mobile ROM just to see, and yeah...it's dead...
cmajewsk said:
Never mind. I Task29, and flashed a Windows Mobile ROM just to see, and yeah...it's dead...
Click to expand...
Click to collapse
You have semi-dead digitizer. But it is nothing you can't temporarily fix every time it happens. Just push red (end call) button really hard for a while and it will get fixed for a while. I recommend you using button savior and lock screen with it and unlock with any other button than red one, it should be permanently fixed then. Please hit the thanks button if I helped you.
lolkoz said:
You have semi-dead digitizer. But it is nothing you can't temporarily fix every time it happens. Just push red (end call) button really hard for a while and it will get fixed for a while. I recommend you using button savior and lock screen with it and unlock with any other button than red one, it should be permanently fixed then. Please hit the thanks button if I helped you.
Click to expand...
Click to collapse
I hit the thanks button as you gave me hope. I am currently using my old TouchPro 2 with an old NRG Titanium Rom on it for the time being, but will try this today. I’ll install “button savior”, but what am I supposed to do with the app? What settings do I run? I think you are totally right about this, as I noticed when I was unlocking my phone, using the green call button worked most often, but now that’s not even working.
cmajewsk said:
I hit the thanks button as you gave me hope. I am currently using my old TouchPro 2 with an old NRG Titanium Rom on it for the time being, but will try this today. I’ll install “button savior”, but what am I supposed to do with the app? What settings do I run? I think you are totally right about this, as I noticed when I was unlocking my phone, using the green call button worked most often, but now that’s not even working.
Click to expand...
Click to collapse
Yes, I have exactly the same problem as you have. My phone was working flawlessly for like a year and a half, but last week all of a sudden the touchscreen sometimes didn't work and sometimes it did. So I tried literally everything, I was fixing my permisions all the time, wiping dalvik, task29, remaking parrtitions, even bought a new sd card. But few days ago I found a solution, by pushing red button really hard (because the digitizer is right behind it) and not using it after. The Button Savior app is a simple app that makes a very little transparent icon on your screen and when you tap it, the menu of buttons will come up (with the same buttons as your hard buttons on your device) so every time you will want to lock the device you will do it on your screen, and won't have to push the hard button and come through all the hassle of pushing the digitizer. I really hope I helped you, as this very same problem was driving my crazy for the past few days.
lolkoz said:
Yes, I have exactly the same problem as you have. My phone was working flawlessly for like a year and a half, but last week all of a sudden the touchscreen sometimes didn't work and sometimes it did. So I tried literally everything, I was fixing my permisions all the time, wiping dalvik, task29, remaking parrtitions, even bought a new sd card. But few days ago I found a solution, by pushing red button really hard (because the digitizer is right behind it) and not using it after. The Button Savior app is a simple app that makes a very little transparent icon on your screen and when you tap it, the menu of buttons will come up (with the same buttons as your hard buttons on your device) so every time you will want to lock the device you will do it on your screen, and won't have to push the hard button and come through all the hassle of pushing the digitizer. I really hope I helped you, as this very same problem was driving my crazy for the past few days.
Click to expand...
Click to collapse
Nah, that didn't work...my digitizer must be completely dead. I held the Red Button for a while and holding it down really hard...made no difference..oh well guess a dumb phone until the Prime comes out....thanks anyway.
cmajewsk said:
Nah, that didn't work...my digitizer must be completely dead. I held the Red Button for a while and holding it down really hard...made no difference..oh well guess a dumb phone until the Prime comes out....thanks anyway.
Click to expand...
Click to collapse
Aww, that's a shame. I really tought it would help. It doesn't work every time, maybe you can try it few more times. If it's not even then going to work, then maybe you should get your digitizer replaced.
Cheers
lolkoz said:
Aww, that's a shame. I really tought it would help. It doesn't work every time, maybe you can try it few more times. If it's not even then going to work, then maybe you should get your digitizer replaced.
Cheers
Click to expand...
Click to collapse
How long do you hold the red button? Also, I am pushing down really hard. I didn't know you could get the digitizer replaced...I wonder who would do that (no way would I send it to HTC and wait a month), and how much that costs...?
HTC sends phones back crazy quick. Atleast that's how it was for me. They actually sent it back the day they got it from what I remember. It did take a while though for the phone to arrive to HTC (this depend who and from where you send it though) If your phone still has warranty I seriously recommended you send it yo HTC. Just remember to flash it 100% stock before sending it.
Sent from my HD2 using XDA App
Well believe it or not, after pressing the Red phone off button for an eternity and applying a ton of pressure, it's working. I am sure it won't be for long. I have a shortcut to lock the phone on the screen. So basically your saying I should stay away from hitting the Red phone off button, or else that will kill it again? What about the other hard buttons?
I am in the UAE at present, so it might be better for me to just order a digitizer and do the repair myself. I see there are a lot of YouTube videos on the subject.
Thanks everyone for your help!

HD2 Black screen after a call?

Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?
Curiousn00b said:
Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?
Click to expand...
Click to collapse
I have the same problem with 2 HD2 phones. Not aways, but most of the time. I ask this question before - http://forum.xda-developers.com/showthread.php?t=1349809 , but i didn't get the answer.
May be it is hardware problem, but if it is it's gonna make me a problems every time.
If you figure it out, pls PM me.
Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…
[email protected] said:
Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…
Click to expand...
Click to collapse
If you push the End button (or any other button) before clean the screen, what happens. Does the screen stays black???
I think that this is a software problem, because other ways every time when I press the End button (or any other button) it will give me Nothing.
luba6ky said:
If you push the End button (or any other button) before clean the screen, what happens. Does the screen stays black???
I think that this is a software problem, because other ways every time when I press the End button (or any other button) it will give me Nothing.
Click to expand...
Click to collapse
[email protected] said:
Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…
Click to expand...
Click to collapse
luba6ky said:
I have the same problem with 2 HD2 phones. Not aways, but most of the time. I ask this question before - http://forum.xda-developers.com/showthread.php?t=1349809 , but i didn't get the answer.
May be it is hardware problem, but if it is it's gonna make me a problems every time.
If you figure it out, pls PM me.
Click to expand...
Click to collapse
@all I found tht these help. The screen blacks out for about 5 seconds now... its more of a temp fix.
https://market.android.com/details?id=com.keyes.screebl.lite
And
http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
Credits go to Quiethinker over on a different thread - http://forum.xda-developers.com/showthread.php?t=1061481
Sent from my LG-VM670 using Tapatalk
black screen after recieving or making a call
Curiousn00b said:
Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?
Click to expand...
Click to collapse
I have the exact same problem. I am using the SD card android version. I've tried different ROMs, but with all I have this problem. When I boot into WinMo I don't have this problem at all, so it doesn't seem to be hardware related.
I can use the phone with anything else without any problem using the SD android version, only when I recieve a call or call out myself the screen blacks out and the phone seems unresponsive. After about 30 seconds to a minute the phone shows the lock screen.
I would love to work with the Android version for normal operation but because of this I still boot into Winmo within office hours...
erikgee said:
I have the exact same problem. I am using the SD card android version. I've tried different ROMs, but with all I have this problem. When I boot into WinMo I don't have this problem at all, so it doesn't seem to be hardware related.
I can use the phone with anything else without any problem using the SD android version, only when I recieve a call or call out myself the screen blacks out and the phone seems unresponsive. After about 30 seconds to a minute the phone shows the lock screen.
I would love to work with the Android version for normal operation but because of this I still boot into Winmo within office hours...
Click to expand...
Click to collapse
Your better off doing what I did. In Android, sonewhere in the settings for calling, change the sensor to off so it never blacks out. In Miui rom its in program's, then calls.
Sent from my LG-VM670 using Tapatalk
Task 29 and start fresh. Only thing that got rid of it, test when you first start the rom to make sure it works normal, then start adding your apps and such.
Or increase the 125mhz CPU settings to 245mhz under cyanogenmod settings/performance/CPU or governor settings.
Sent from my HTC HD2 using Tapatalk
my screen stay black (off) when i take the phone away from my face EVERY call as well. this is what i do and it works everytime.
1.)pull the phone away from my face (duh)
2.)starting with it facing the sky, i turn it to face the floor (when i say facing i mean screen up ... then screen down)
3.)as soon as i turn it back over (screen face up) it turns on
im thinking its a sensor issue??? either way it works and i dont go on a hardware button mash fest to turn my precious leo back on.
if this helps please send thanks ... if not tell me im crazy :-D
Curiousn00b said:
@all I found tht these help. The screen blacks out for about 5 seconds now... its more of a temp fix.
https://market.android.com/details?id=com.keyes.screebl.lite
And
http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
Credits go to Quiethinker over on a different thread - http://forum.xda-developers.com/showthread.php?t=1061481
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
I just download this apk and will try it ....
But I think it's hardware problem (may be with the sensor), because when I turn back on Win Mobile 6.5 i have the same problen ...
I think to bring the phone to service
... when I take it back will tell you what is exactly the problem ...
Task 29 then install windows, next install the right radio version , finally install the android
like dragonovus say´s try completly reinstalling android.
and please feedback here
BUILD.PROP baby!!! there is a tweak for this and i believe it works( in the prop ) dont know exact address but google "build prop tweaks" also use setCPU and set the lower number to about 350+ also try to use the end hardware button less cuz this has been addressed in another thread..... the button sticks or sum crap..... i use zmooth and never use the red end button........... good luck
Will try all, but now I use ' Screen stays on '
Sent from my LG-VM670 using Tapatalk
well ... for me Screebl Lite didn't help me
Reinstalling Windows is not necessary. Just make sure you have the right Radio and HSPL then do a task 29 before installing Android. But your problem is most likely hardware related. The end call button is most used and therefore prown the wear and tear... Try using the red end cal softbutton. I guess you only have that problem when you use the hardware button right?
In that case it's the problem with the button and not the software...
And at the end did anyone of u solved this? If u need help post reply or pm me. I think i have a solution for u.
Sent from my HTC HD2 using Tapatalk
PPKLP said:
Reinstalling Windows is not necessary. Just make sure you have the right Radio and HSPL then do a task 29 before installing Android. But your problem is most likely hardware related. The end call button is most used and therefore prown the wear and tear... Try using the red end cal softbutton. I guess you only have that problem when you use the hardware button right?
In that case it's the problem with the button and not the software...
Click to expand...
Click to collapse
Yes, man! I have the HSPL2.08 and radio 2.15.50.14 ... I think we all do. I can't use the soft buttons, because I can't see them. That's is the problem. The screen is black and won't lights up. May be I can't read you ... but I try to run back Win Mobile just to check is it from android OS or the sensor...
build.prop does not help
I tried the build.prop thing. I added those 2 lines at the end of the file:
ro.lge.proximity.delay=25
mot.proximity.delay=25
No change, still a black screen after any call.
Any other idea ? How to completely deactivate the proximity sensor ?
Fixed !
I finally fixed the issue by removing the screen protector sheet and cleaning the upper left part of the screen with a dry towel.
It works fine now. It was just a problem of the proximity sensor not being exposed enough.
I hope this helps.

Non-responding touch screen

Hi there guys
I am running sensation xl rom 5 months now. I am running custom android roms about two years now so I am not a complete noob.
As I was playing with backgrounds themes etc, just for a new feeling, I installed GO Launcher from market and few themes. I then noticed that the phone was becoming progressively unresponsive. Sometimes I had to press twice or wait and press again. At a point the phone became completely unresponsive. I thought that maybe the launcher did something bad to the rom so I did a clean install of the rom again. The rom was booted normally and when I reached the point were I needed to configure the rom by touching nothing happened.
Up until then I was thinking that there was something wrong with the flashing rom so I flashed another trustworthy NDT MIUI rom that I was using for over 8 months without any problems. However the exctly same thing happend when I reached the point to enter the pin the screen was unresponsive. I even went back to the original win mobile 6.5 rom (eek) but no luck.
The phone has never ever had a drop. It doesn't have a screen protector but it is good as new.
Any ideas?
Do you think that I have to replace the screen?
Please guys help, I love my HD2
It seems that your screen is dying - what is unfortunately typical in HD2. Topic was discussed many times here on xda, look for it. It also happened to me. Replacing the screen is the solution, but first you should try HR, and try to avoid pressing right (hang up) button
rexx87 said:
It seems that your screen is dying - what is unfortunately typical in HD2. Topic was discussed many times here on xda, look for it. It also happened to me. Replacing the screen is the solution, but first you should try HR, and try to avoid pressing right (hang up) button
Click to expand...
Click to collapse
thnx for the reply,
i looked before posting but nothing really helped me. Do you think that it is a coincidence that problems started when i installed the GO launcher?
Also I tried HR but nothing changed
And in the case you will have to change the touchscreen, be careful. Some new and some Chinese touchscreens are not supported by Android's kernel
try pressing alternately and simultaneously the power and call button
The "pressing the power button" trick worked but then stops working and then again and so on....Temporary fix.
I went to the HTC service and they asked 164 euros to change the screen's digitizer. No-way...
Thanx for the replies guys
HD2_TTs said:
The "pressing the power button" trick worked but then stops working and then again and so on....Temporary fix.
I went to the HTC service and they asked 164 euros to change the screen's digitizer. No-way...
Thanx for the replies guys
Click to expand...
Click to collapse
Interested in buying it : PM me if interested too!
bib*oops said:
Interested in buying it : PM me if interested too!
Click to expand...
Click to collapse
you have a pm

Categories

Resources