htc touch not functioning properly - Touch GSM General

i tried switching on my phone today but instead of the normal flash screens i got a screen asking me if i want to proceed with the hardware reset!!!!!!!
sumhw evn the hardware buttons hav stoppd working
any help/suggestions will b appreciated
i was running the standard wm 6.1 rom

ummm anyone???????

You mentioned that the power buttons is not working.
What kind?
Camera or .. ?

It must have gone into hard reset mode -probably by accidently touching and holding certain keys when in your pocket.
Save your data with PIMBackup and/or Sprite Backup, then do a hard reset (see wiki on that).
luck! let us know how u go!

yippee
its fixed!!!!!!!! god knows how but it jus came back on by itself all functioning and all
did a hard reset to make sure
neways it works now
wonder what screwd it up
ps sorry 4 being a little late been away from the net

Great to hear that.
Cheers!

Related

Please advise: is this unbrikable??

Hi guys, been reading the forums for some time now but my first post since i think i've briked my device lol, today i decided to give the omapclock a go, and found a clock speed of 240mhz (read other threads saying it was fine, and i also made sure it was functioning right.. then decided to register the speed using the updated version....
then when i reset my wizard it just hangs on the wm5 screen, the radio rom seems to load as i can hear it via the speakers on my pc... question is, is it recoverable?? its not been modded i.e its got the factory rom on it and radio, and i can get into bootloader mode okay with USB support... can i interface with it somehow, might be a good hance to try wm6, however i think its briked and not holind much hope..
can someone please advise?
s/unbrickable/debrickable/
have you tried hard reset?
yes tried holding down the power button, pulling out the battery etc
doesn't sound like hard reset to me, try holding the comm&voice_dialing buttons while "poking" the reset hole
says booting in safe mode but still hangs
by comms and dialling button do you mean the green answer phone?
thank you so much the hard reset worked, was quite awkward figuring out how to hard reset lol
no problem, now you can go back to breaking stuff
yup going to try an upgrade to wm6 now, wish me luck!

stucked on 2nd splash screen

hi guys, this might seem to be posted a lot of times but i havent found anyone who experienced the same problem as me. ive flashed a custom rom (not found in xda dev) and the phone went well for 3 weeks to a month.however, today(lunchtime) i had a problem i soft reset my device and i was stuck at the 2nd splashed screen. i dont think my hermes is bricked because i can do anything a normal hermes do before. (pda function, calls, sms) really no problem at all until today. ive done what the wiki said like
Problem 2: stuck on windows mobile screen
Try to soft reset with stylus and wait 5 minutes on the windows mobile screen to see if OS boots
If all you get is same windows mobile screen, remove the battery for some time (about 20 min should be enough) and put it again.
Again, if all you get is same windows mobile screen do a hard reset.
If doesn't solve the problem do a hard reset, but do not press spacebar to reboot after. Instead, do a soft reset with stylus when the device asks you to press spacebar.
Check if you might have the NO GSM Problem
well i cant go pass the 2nd splash screen so what i did was hard reset it. and problems gone. my concern is ive lost a lot of documents because of what happened. so i just wanna ask you guys what could be the problem and the solution to prevent this from happening again.
much respect to all here!
TIA
What do you do just before the problem occur?
best thing to do is hard reset you phone this will reinstall you OS and resolve the problem. You need to old the 2 top soft key and press the reset but with your stylus. This will then bring then take u into the hard reset mode. follow the prompts on ur screen by using your keyboard .
This will work as i have experienced the same problem
kind regards
Ash
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
hi guys
Did u happen to
a) disable the bottom tray
or
b) set PIE cache to storage card?
Both tend to cause this, tho not in every case.
ive done both of this in my ppc. hehehe
@sir mikechannon
yeah that was my badd. havent done bckup and all. hehehe
@sir ghz
hmmm nuthin, just the usual... havent installed anything prior to the problem.
well guys... thanx for the comments my ppc doing good now, i just hope it wont happen again. hehehe. much respect!

hermes is in serious problem

my hermes is not woking it usually stuck after turning on ,.,.,.,it does't even synchronized by Pc and i cant upgrade the window's ,.,.,is there any no vendor rom for my hrmes like prophet,.,.,,plz help me,.,.
great day,
srizvi
is it stuck in boot menu or anything else?
hiE
no it get stcked on the today screen ,.,.,.please help if u can
great day,
srizvi
reset the phone
press and hold the two soft keys at the bottom of the screen, (these are the keys above the window button and the ok button. Power on the device while holding the keys and follow instructions.
lewnetoons forgot to add - "kiss all your contacts goodbye if you didn't back them up with a free backup program!!"
Do a search for pimbackup or sprite backup.
Cheers...
lol
oh yeah, I always forget to tell people that cause I backup daily. thanks

Bricked Polaris? I'm getting crazy !

Hi and hope someone could help and calm me down.
I have an original free Polaris with 6.0, and upgraded with the 6.1 rom from the HTC site. Everything was working fine until today that I soft-reseted.
It boots OK but when it shows the password screen, it doesn't allow me to put it. I touch all the screen and nothing happens, the soft options (unlock and Menu) don't respond either.
Last thing I did about 3 days ago was to install Advconfig 3.3 but I don't think this could damage the phone.
I'm not even able to sincronized because ActiveSync tells me to unlock it first.
I'm really getting mad and I'm desperate !!!!
Thanks in advance for anyone who can help ...
the first thing to do is an hard reset.
try it and tell us what happeans
OK, and many thanks in advance for your fast feedback !!!!!
hard reseting . . .
I'm sorry, nothing happened. Just the same symtomps. I hard reseted pressing the explorer and gps button, while presing the soft-reset with the stylus. It seems that the problem is that when I type, the screen doesn't respond, as if the problem where the presure with the stylus.
Continue desperated ...
Bad Hard-reset. I just misunderstood that I had to keep stylus pressed until tha message appeared. Now I'm back again.
One of the worst hours of my life.
Thanks very much for your suggestions, finally it worked.
Best regards.
ok nice

HD2 - No Sound from Earpiece

Hi,
From some strange reason I've suddenly got no sound from the earpiece (speaker is ok). Sure it was working ok yesterday
I really hope this isnt a hardware fault. I have only installed a few extras like Task Mangager, Net Framework 3.5... I wouldn't think that this would cause the problem??
Havn't done a hard reset yet, as its all set up... but might that help?
Am about to cry, so any help would be greater appreciated.
Thanks
A
If it's not a hardware fault, a hard-reset should help for sure.
Maybe thats the easiest option you have. Becuase then, you can set up every application you want to use step-by-step and check for earpiece-funtionality after every setup.
This way you'll be able to detect the "bad" application which silences your earpiece.
Well, if it's a hardware fault you'll know right after the setup-wizard
I'm now trying to do a hard reset to resolve the problem.... but that dosn't seem to work!
Held Vol UP & Down buttons down (as best as I can) and tapped on the power button.... nothing. How long should you wait...?
Do you think 02 would have removed this reset procedure in their ROM?
Any help would be appreciated
Thanks
Did a hard reset by leaving the phone on, pressing the vol up& down and then putting a paper clip on the reset.
I REALLY want to cry as this did not fix the problem. Been onto O2 and it has to go back... really dont have a clue how long the repair/replacment process will take.
I dont think there is anything else I can do. Was working fine yesterday.
But if anyone knows better then would love to hear from you.
A

Categories

Resources