Hello everybody.
After i flashed the Radio ROM 2.69.11 to my Wizard..
Its broken, freezes on bootup and wont run.
the screen shows the following:
IPL: 0.3
SPL 1.03
OS 1.3.1.13
--------------------
How do i fix this problem?
Thanks
//Daniel ..
IPL 0.3? What did you loaded into it...
The Radio ROM may be too new for your IPL version...
If warranty is not important, Go to the Wizard Upgrade section and read the stickies, use Button's 1.05 ROM to unlock, then upgrade a newer IPL and SPL.
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
latii said:
I see i made a mistake..
its ipl 1.3 sorry..
How i installl Buttons. if i cant use ActiveSync?
//daniel
Click to expand...
Click to collapse
Put it into bootloader, then flash from there.
Bootloader is.. Power + camera button.. right?
I got red/green/blue/ screen now.. with IPL 1.03 and SPL 1.03..
Connection USB and start the .exe file? (from buttons).
//Daniel
Wizard Works Again!!
Big Thankss To Alll !
Really Appriciate..
//daniel
hi all,
i'm french,sorry for my little english
i have flashed my polaris but i have not run hard spl
now he boot only in bootloader mode and flash spl is not possible
what can i do?
i have : POLA 100 SPL 1.25.0000 CPLD-2
THANKS A LOT FOR YOUR HELP!
rwik5060 said:
hi all,
i'm french,sorry for my little english
i have flashed my polaris but i have not run hard spl
now he boot only in bootloader mode and flash spl is not possible
what can i do?
i have : POLA 100 SPL 1.25.0000 CPLD-2
THANKS A LOT FOR YOUR HELP!
Click to expand...
Click to collapse
Lots of threads on exactly this, check the polaris wiki
http://forum.xda-developers.com/showthread.php?t=425922&highlight=mtty
Also don't miss the part where he says try to flash the original ROM first, or try SD method too
Rwik,
Flash the original / shipped rom back.
Hardspl
reinstall custom rom.
big thanks at all, that works with mtty
thanks thanks thanks!!!!!!!!!!!
Hello
Got here friends htc wizard (MDA VARIO). After dunno what only boot screen appears and thats all. Bootmanager is accessable.
IPL 1.01
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
I am able to put there button rom, but thats all. I tried many roms, but noone can be instaled. Also tried love wizard rom. I dont have the original rom.
Batery is loaded up to max.
Any suggestions?
Ok solved, it was problem with flash tool.
EDIT: still i dont have any functional ROM. The love wizard rom doesnt boot up. I dont have access to original rom. I am nearlly at end of ideas.
I was able to load there this ROM:
RUU_Vario_AKU3.3_3822_382120_026911_TMO_DE_GER_Ship.exe
But still it freezes on boot screen.
Please, anybody got a rom, that works in a Mda Vario from slovakia? Its for sure cid blocked and i dont have a functional rom.
Hard reset is not possible. He says, that failure at format. Any body got some idea????
maybe you can try to update your IPL to 3.08 and GSM to 2.x
sailor_sky said:
maybe you can try to update your IPL to 3.08 and GSM to 2.x
Click to expand...
Click to collapse
Tryed and still not working. But thanks for your post
its my very 1st time to try upgrading my 02 xohonell, everything runs smothly
100% complet. but when i rebot my phone it hapend to be stuck on bootloader. can somebody help me about this?..is there a way to fix my phone?
on screen says....
typhoon PV/DVT
IPL 1.00
SPL 1.01.0109
Need an IU (0)?
same problem here.
edsor_2008 said:
its my very 1st time to try upgrading my 02 xohonell, everything runs smothly
100% complet. but when i rebot my phone it hapend to be stuck on bootloader. can somebody help me about this?..is there a way to fix my phone?
on screen says....
typhoon PV/DVT
IPL 1.00
SPL 1.01.0109
Need an IU (0)?
Click to expand...
Click to collapse
U can try upgrade to ROM(27Mb) on IU mode.
If not and using SD card upgrade
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Flash your Official ROM
rockerboom said:
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Click to expand...
Click to collapse
First try to flash your official ROM and then try to flash ipl/spl again follow step by step. After that try to flash customize ROM again. Hope you will success.
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
rockerboom said:
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
Click to expand...
Click to collapse
After flash back to official ROM , enter bootloader and check ipl/spl first.
Normally, if you flash ipl/spl (not hard spl) when you flash back to the official ROM the ipl/spl will back to original. S/R - wait for boot to WM if OK then do H/R again. And flash ipl/spl again - enter bootloader and check ipl/spl again (changed or not) if OK after that I recommended you flash Onyx ROM. I used it for long time and no trouble.
Hope, it's can help you.
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
rockerboom said:
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
Click to expand...
Click to collapse
How you flashed ROM ? By RUU (PC) or used microSD card. I recommened you to use RUU (PC) follow step by step. Sometime when I used microSD card to flashed ROM , it's successful but cannot boot, after that I flashed Official ROM by RUU and unlocked the phone again it's back to normal. And your official ROM, you must check with your operator or distributor because in different zone it's use diferent ROM.
Dear ELF341,
I only can flash via PC RUU, I don't succeed in SD card way:
- When I copy the *.nbh file into SD card, then enter bootloader, I just can see the checking SD card content string displayed very fast, then the tri color screen.
- When I create a goldcard and copy *nbh file into it, enter bootloader, the brick ask for 'upgrading SD image', I press power button for it to start download but it hang at 'downloading from SD' with a blank download status bar.
Actually I bought this ELF from a man on my local site, so I don't know where is the distributor...I used the mtty and usb monitor to check for my device infor, then search internet for my original ROM, I only can find in a China forum that match my deviceID/CID....
For my case, I really don't know why I can not change its IPL/SPL version? Please help me!!!
Thanks for your time!
well u hav to rename the nbh file to ELF0IMG for SD card flashing to work.