Database Users

XDA neo German to English

Thanks Machinagod for his nice tools.
Just flash O2 XDA neo from German to English.Here is the procedure:
1. Backup your data in your xda. ( including your sms and contact).
2. download the romupdateutility.exe file (by Machinagod).
3. extract the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe to a filefolder. ( use winrar or winzip not double click .exe file or it will run immediately)
4. copy the romupdateutility.exe just downloaded and copy it into the folder ,then overlay the original file.
5. connect the xda to the PC:
6. then run the .exe file.
7. Ok, just It start now , wait about 10 minutes until it finish.
Thanks decmac and others (sorry cant remember the name) and all the xda-developers.

one problem is that after that, it will lost the homezone icon in O2. so you have to look for the software and setup it. just find one HZ_V0530_Magician_AKU2.6.CAB ,but didnt work well on wm5. So if someone can deal with it, please post it.

sskstar said:
Thanks Machinagod for his nice tools.
Just flash O2 XDA neo from German to English.Here is the procedure:
1. Backup your data in your xda. ( including your sms and contact).
2. download the romupdateutility.exe file (by Machinagod).
3. extract the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe to a filefolder. ( use winrar or winzip not double click .exe file or it will run immediately)
4. copy the romupdateutility.exe just downloaded and copy it into the folder ,then overlay the original file.
5. connect the xda to the PC:
6. then run the .exe file.
7. Ok, just It start now , wait about 10 minutes until it finish.
Thanks decmac and others (sorry cant remember the name) and all the xda-developers.
Click to expand...
Click to collapse
Is it need to be unlock CID first? Or we can flash it with this step without any processes before?
If if have to do something before, please, post it to me, I am very new for flashing ROM and I also bought Neo fro German, too.
So please post the process previuos flashing for me.
Thanks in advance
ans also thanks machinagod for help everything

Hello, thanks for this. I presumed it worked fine for you?
I was wondering, is there some way to flashing it back to original? I mean, if i want to flash back to the o2 rom? Is that possible, and if so, how? I have not seen the o2 rom anywhere yet??
Can you tell me what you found to be the biggest difference in the new rom? Is there momre included software?

need not to unlock cid first, it can overwrite the original german rom.
FOR can
not get the german rom. therefore, cant write back to german rom.

sskstar said:
need not to unlock cid first, it can overwrite the original german rom.
FOR can
not get the german rom. therefore, cant write back to german rom.
Click to expand...
Click to collapse
Thanks a lot, sskstar
Can I ask one more, are there anyproblems after you flash your neo, i mean the stability or how about the OMAP overclock still work.
Thanks in advance

I get error: ERROR 240 while doing the ROM update. What should I do?

sskstar said:
Thanks Machinagod for his nice tools.
Just flash O2 XDA neo from German to English.Here is the procedure:
1. Backup your data in your xda. ( including your sms and contact).
2. download the romupdateutility.exe file (by Machinagod).
3. extract the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe to a filefolder. ( use winrar or winzip not double click .exe file or it will run immediately)
4. copy the romupdateutility.exe just downloaded and copy it into the folder ,then overlay the original file.
5. connect the xda to the PC:
6. then run the .exe file.
7. Ok, just It start now , wait about 10 minutes until it finish.
Thanks decmac and others (sorry cant remember the name) and all the xda-developers.
Click to expand...
Click to collapse
Hi.
I tried this procedure on my Norwegian Qtek S200 with ExtROM 2.10.7.108. It all went fine until the phone started flashing. At 1% I got an error message on PC, which I don't remember, I clicked Exit and the update program stopped and nothing more happened on the phone. I restarted the phone and now the display only shows a red/green/blue screen and absolutely nothing happens. Phone won't start anymore.
Anyone who can help me out? Is there any way to flash the ROM from from SD-card? Help...! ;-\
Thanks, OrvarK

OrvarK said:
sskstar said:
Thanks Machinagod for his nice tools.
Just flash O2 XDA neo from German to English.Here is the procedure:
1. Backup your data in your xda. ( including your sms and contact).
2. download the romupdateutility.exe file (by Machinagod).
3. extract the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe to a filefolder. ( use winrar or winzip not double click .exe file or it will run immediately)
4. copy the romupdateutility.exe just downloaded and copy it into the folder ,then overlay the original file.
5. connect the xda to the PC:
6. then run the .exe file.
7. Ok, just It start now , wait about 10 minutes until it finish.
Thanks decmac and others (sorry cant remember the name) and all the xda-developers.
Click to expand...
Click to collapse
Hi.
I tried this procedure on my Norwegian Qtek S200 with ExtROM 2.10.7.108. It all went fine until the phone started flashing. At 1% I got an error message on PC, which I don't remember, I clicked Exit and the update program stopped and nothing more happened on the phone. I restarted the phone and now the display only shows a red/green/blue screen and absolutely nothing happens. Phone won't start anymore.
Anyone who can help me out? Is there any way to flash the ROM from from SD-card? Help...! ;-\
Thanks, OrvarK
Click to expand...
Click to collapse
If you are still having the problem please take out the battery and wait ca. 3-5 secs and reinstall it back again. After doing this you can power up your device once more. And it should fine.

dont kill me
Hi.´m from Brazil, and I´m having a hard time to do the process.
Have some questions:
1- where do i find the RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.e xe ?
2 - The file i supose create is in the computer ?
3 - Where is the romupdateutility.exe ?
The most important, I have a Qtek S200 form FRance.
version Rom: 2.9.7.33 FRE
Date Rom: 2/14/06
Version de radio: 02.07.20
If need some info let me know
Thank you all, very much!!!

need RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.e xe
Brothers if somebody has RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe. then please upload it on rapidshare or some where else.Because I have tried a lot for this file but I could not find it. Thanking you for help in advance.

toor_rana said:
Brothers if somebody has RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship.exe. then please upload it on rapidshare or some where else.Because I have tried a lot for this file but I could not find it. Thanking you for help in advance.
Click to expand...
Click to collapse
It's on the wiki... Look under "Official ROMs" and I'm sure you'll find it...

Why do some devices brick and other ones don't
I would like to do this German to English rom, but i'm afraid of bricking it :s .. Is this brick safe?

german to italy
salve a tutti!
qualcuno puo' dirmi
come cambiare lingua nel mio
O2 xda neo.
grazie

timmeke154 said:
Why do some devices brick and other ones don't
I would like to do this German to English rom, but i'm afraid of bricking it :s .. Is this brick safe?
Click to expand...
Click to collapse
If you flash an OS only ROM, and us soft/jump SPL, it'll always be recoverable.

where i can find the romupdateutility.exe?

i already download the version in english, but when it's going to start the process appears the legend "ID ERROR", what can i do??

You'll need to use Hard/Soft SPL.

l3v5y said:
You'll need to use Hard/Soft SPL.
Click to expand...
Click to collapse
??????? what is that??
and how i use it?

No GSM, D 5.60.00 WWE? Whats that mean?

Well i tried to install WM6 and a screen with 4 BIG bold lines (from top to bottom Blue Green Red and this () yellow/tan color) and on the bottom line it has
No GSM
D 5.60.00 WWE
How do i fix this/whats wrong/WTF/ help please =/
EDIT: now i was messing around with the buttons and up came this,
(all options are selected no)
Boot Options:
Enable KITL__________NO
Clean Registry Hive ___NO
Format storage_______NO
Do i enable one of these or something? please help me...

Enable the last two and press the "envelop" button.
That should fix your problem

Extra question: are you sure your device is BlueAngel?

@up no im not, I didnt even know my phone had a name, Mine is a Audiovox PPC6600 but its the same pic as the blue angel, So i assumed it was.
Okay, I did what he said, and then my screen went white, after a few of waiting it was still white so i did a soft reset, and now its at the same spot.

xXBuddahXx said:
Mine is a Audiovox PPC6600
Click to expand...
Click to collapse
Big problem right there! I think you just bricked your phone
The ROMs you find here are for GSM phones and yours is CDMA. Currently there are no wm6 ROMs or wm5 ROMs available for CDMA phones, some people were working on a wm5 but I don't know if they released it.
To fix your phone you may try to put it in bootloader again and try to flash it with an original ROM.
Good luck!

This "No GSM" made me think. So we have another gotcha and Harrier (this is your device, xXBuddahXx) probably saved

Ok what now? did i really BIRCK my phone? Im confused Jakubd is there a way to fix it? i hope so or that smiley face is really mean. Im a huge noob to this crap (im only 16 and this is my first pda/phone thing) So again please have patience with me, Bootloader mode is the record/cam/power/reset thing right? What do i do after that? Can any of you give me some links or a step by step tut? I dont want to screw it up any more than it is if i can fix it...

Boot Loader Mode
You can enter or exit bootloader mode by pressing the camera button, power button and then the reset button and hold for a few seconds.
If the above won't work, this worked for me (thanks to all the gurus in the forum): press and hold power+record+camera the same time and then reset
Click to expand...
Click to collapse
Here you can find the correct ROM for it: http://forum.xda-developers.com/showthread.php?p=764778#105710
If you can get into bootloader mode you're fine, you didn't brick it.

Thank u thank u thank u Hey quick question, When i install this do i have to put it in bootloader mode first? and When i install this will it return it to factory settings? Because i flashed it from VZW to Cricket

You'll have to put your phone in bootloader mode before you install the update.
After the installation is done, you will need to hardreset it.
When the upgrade is completed, you must perform a Hard Reset
1.
Press and hold the "Power" button, and then press the Reset Button. Colored stripes (the bootscreen) will appear on the screen.
*
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, EITHER:
o Quickly press "Record" & "Camera" before the versions appear at bottom right
o OR press "Power" & "Camera" & "Record" buttons and Reset at the same time
*
If you have a PH20B1 device such as SX66:
o Quickly press "Record" & "Windows Media" before the versions appear at bottom right EITHER
o OR press "Power" & "Windows Media" & "Record" buttons and Reset at the same time
2.
You'll see three options on screen. You must change the second and the third to yes. If you are not developing/testing software you can disable the first debug option for better performance.
* If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc, use "Camera" and the "Record" buttons.
* If you have a PH20B1 device such as SX66, use "Windows Media" and the "Record" buttons.
* Note: The "Record" button moves up and down the menu and the "Camera" button toggles Yes/No. When you're done, press the button in the middle of the D-Pad to continue booting.
3. Press the "Mail" button. A white screen will show for 30 seconds, while it is clearing your device in preparation for the new ROM to start executing
4. When the bootscreen, aka. the colored stripes is displayed, wait more, you are booting. The welcome screen to set up your device will appear shortly
Click to expand...
Click to collapse
If you still that ROM (that you flashed from VZW to Cricket) then use it.

Well, it didnt take a rom to flash it i just uploaded a prl and Changed my Min and NID/SID numbers... is it still okay to use the one that was listed, or do i have to download a special one for VZW?
And thank you so much man, you really saved me! I would rep ya if i could!
Also is there a website That is for CDMA phones like this one, and does mine have a cool name like blue angel or somthing (it sucks when i tell my friends that i have a Audiovox PPC6600 Gee Wiz!)

Your phone is a blueangel, it just have a different hardware for the phone part (PH20A3) and because of that your phone "cool" name is Harrier.
You'll probably have to stick with wm2003 as I don't believe that they have a wm5 or wm6 for your hardware. Here is a link with more information and people trying to make wm5 for the cdma: http://forum.xda-developers.com/showthread.php?t=244441
For the update, download it from verizon: http://support.vzw.com/how_to_use/bba_device_update.html
There are 2 versions, one for a phone with camera and for phones without camera.

Error 120 country ID error 56-56-8-8-8
Im guessing i download say the eruopian version or somthing? where would i find this on the USA site or something?

I found this on the verizon website here in the USA.
1. Download update to desktop
2. Unrar or unzip all files in exe or rar into a new folder
3. Open the folder with the extracted files
4. Download this file: MaUpgradeUt_noID.ZIP
5. Extract MaUpgradeUt_noID.exe from this file and place it with the other upgrade files.
6. Run this new exe file instead of BaUpgradeUt.exe to update your rom
7. If you get an error the first time, run MaUpgradeUt_noID.exe again without touching your device (don't take it out from the cradle, don't reset it, don't touch it at all!)
8. If you get the same error kill from Task Manager these two process: wcescomm.exe and rapimgr.exe and then retry running MaUpgradeUt_noID.exe
9. If the seems to hang forever the "Getting the information...", put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button. and run the MaUpgradeUt_noID.exe again
Click to expand...
Click to collapse

This application has failed to start because RUU.dll was not found. Re Installing the application may fix this problem. I didnt even install it, its just an exe =/ soooo close!

You're not reading the instructions dude.
First you donwload the update from the verizon website
Then you use winrar or winzip to extract all the files from the archive to a folder
Now copy the MaUpgradeUt_noID.exe (wich you extracted from the zip file) to the same folder
Run the MaUpgradeUt_noID.exe and you should be fine

Sorry man, i know i must be getting annoying =/. But i cant find the update to download from the website :S

Ok... after 1/2 hour uploading I got two files for you:
If your phone have a camera:
HA_VZW_207_117_01167_A12.rar (37.98 MB)
http://www.megaupload.com/?d=W2M60157
If your phone don't have a camera:
HA_VZW_207_118_01167_A12.rar (37.67 MB)
http://www.megaupload.com/?d=033DU3IA
Just download the correct file, extract it using winrar, put your phone in bootloader mode and run MaUpgradeUt_noID.exe
Good luck!

THANK YOU OH SO MUCH!!!! Man, is there ANYTHING i can do for you??

Help others.

Tutorial for applying rom to pharos

guyz,
plz help me out...
someone please provide me tutorial for applying roms to my pharos,
i m from india can i apply any rom?

i read in this forum
Quote:
My HTC Pharos 3470 is HardSPL now ... w000t !!! %)
Did it from the first time ... thanks to Suracha and the reading of this whole thread ... (my spl was SPL 1.11.0001)
Here are some basic notes for those who are still stuck
1. Set Button 3 (Camera) to <None>.
2. Transfer the extracted files (JumpSPL.exe & Pharos_JumpSPL.nb) to your device and execute.
3. Change 0x00000000 to 0x10000000 as Jump Address.
4. After geting the file list, press Camera first; then press Power. This is little difficult, if you pressed Power too long; you device may be turn off.
5. Tap the Pharos_JumpSPL.nb file, it must be tabbed while Camera & Power button are pressed.
6. After above, you should get grey background screen.
7. On ur pc quickly ( means make usb connection ) double click the ROMUpdateUtility.exe from the HardSPL dirrectory, and follow through the flashing process (what steps in flashing process?)
several question from me.
1) are this steps right?
2) what to do when get Grey background?
3) should i have to remove memory card and sim card?
4) did i have to backup my og rom? but how?
plz correct me >>>

I m also searching for the working tutorial to flash a rom in a safe way and avoid any damage to the phone!So can anybody help me???

Both of you are on the right path. The steps listed are definitely correct. Flash HardSPL files once using the below method first if you are not concerned over the warranty. Then you can flash any ROM you like from the Forum as many times you require. Incidentally the HardSPL for it doesnt seem to be permanent in my Pharos. I was experimenting with some ROM's and then flashed back to Original 6.1 ROM from HTC and voila it was back to original HTC SPL. Now I have to use Suracha's method or HardSPL again to replace the ROM as its back to the restricted SPL.

hey i recently got a htc pharos i wanna put android on this or the manila rom can someone email me links mactvsinist
[email protected]

Original 6.1 ROM from HTC for P 3470
Where can I find the Original 6.1 ROM from HTC for P 3470 and can the radio, ROM & SPL of my WM6 phone be upgraded without Jump/Hard SPL, if I update with this original ROM.The Current specs are:
ROM - 1.11.707.1 (Dt. 29/01/2008)
Radio- 03.15.90
Protocol Version - 4.1.13.59

wayne_rooney said:
i read in this forum
Quote:
My HTC Pharos 3470 is HardSPL now ... w000t !!! %)
Did it from the first time ... thanks to Suracha and the reading of this whole thread ... (my spl was SPL 1.11.0001)
Here are some basic notes for those who are still stuck
1. Set Button 3 (Camera) to <None>.
2. Transfer the extracted files (JumpSPL.exe & Pharos_JumpSPL.nb) to your device and execute.
3. Change 0x00000000 to 0x10000000 as Jump Address.
4. After geting the file list, press Camera first; then press Power. This is little difficult, if you pressed Power too long; you device may be turn off.
5. Tap the Pharos_JumpSPL.nb file, it must be tabbed while Camera & Power button are pressed.
6. After above, you should get grey background screen.
7. On ur pc quickly ( means make usb connection ) double click the ROMUpdateUtility.exe from the HardSPL dirrectory, and follow through the flashing process (what steps in flashing process?)
several question from me.
1) are this steps right?
2) what to do when get Grey background?
3) should i have to remove memory card and sim card?
4) did i have to backup my og rom? but how?
plz correct me >>>
Click to expand...
Click to collapse
Thanx its good!!!!!!!!!!!!!!!

success
very helpful and straight forward tutorial except i fond it hard to set camera to none since phone was in German but Google translate helped a lot.

How to flash htc diamond 2 ?

Can someone put some instructions how to flash our diamond 2 ?
Please help.

Me too!
I've also been reading through a lot of material from xda but aren't confident enough to jump into messing with my diamond2 just yet.
A tutorial/guide would be a big help if someone has the time.
Cheers

Have finally just gotten around to flashing my Diamond 2 for the first time (used to flash my Orbit all the time). And it really is a piece of cake.
1st..... you MUST flash the HardSPL Unlocker to your phone. You can get it in THIS THREAD. It's at the foot of post #1. Also, READ the first two posts of that thread so that you make no mistakes. But in a nutshell:
Download and unzip the Unlocker file;
Sync your phone to the PC;
Run the HardSPL Unlocker from your PC; (Sync connection may be lost at this point so if your PC says new USB device found, say yes to establishing a new connection)
When the flash is complete, your phone will re-boot;
To confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.83.OliNex, which is the Hard-SPL version.
With that done, you are now ready to flash the ROM to your phone. Easiest and safest way is Bootloader method which is best described by duttythroy. So download the ROM you want to try, unzip it and if it's not already so named change the name of it to TOPAIMG.NBH. Copy that file to an empty SD and place the card in your phone and follow the instructions below:
duttythroy said:
SAFEST WAY TO FLASH YOUR ROM IS THROUGH STORAGE CARD METHOD:
* Copy TOPAIMG.NBH into the root dir of your Storage Card.
* Be sure to have at least 30% of charge.
* Turn off your device by using the Power Button.
* Go to Boot loader mode. Push and hold Vol. Down + press Power button.
* After that your device with have a white screen with text " Press to power button for continue upgrade or Press Volume down button for cancel upgrade , select press to power button and it will start upgrade Rom.
+ Video : http://www.youtube.com/watch?v=FbRboNeo2XE
- this video made by wadialdoor ( Thanks u so much ! )
Click to expand...
Click to collapse
When the flash is complete do a soft reset and away you go!
It really is that simple

2 Questions:
- My htc diamond 2 is a free phone, not a operator phone (locked). I have to apply the HardSPL Unlocker ? What for?
- The bootloader method works on a htc original 6.5 rom ? I have to rename the file rom becasuse this is a .exe file?
orry for this questions but i don´t want make mistakes.
Thanks to all.

Hi again,
Not too sure about a free phone needing HardSPL, try searching that thread for more info.
As for renaming the ROM to TOPAIMG.NBH, that is so the bootloader knows that it is an Image to install. All ROMs (to my knowledge) are .NBH files so an .exe file would be of no use.

Original ReadMe NL and EN
README NL: http://www.4shared.com/file/148320582/a873fccf/README_NL.html
README EN:http://www.4shared.com/file/148321684/fbea80c6/README_EN.html

[Q] How to flash ROM files with SEUS

Guys,
Pls explain how to flash ROM files into my X2, i have downloaded the X2_1230-2799_GENERIC_UK_R3AA035_CDF1231-4909_R22A_2 and the GENERIC_UK_R3AA035_CABS files but dont know how to use them with SEUS.
Pls be kind enough to expalin how it works,,
Rgds,
NK
Pls leave a reply.

guys please give me a solution

I want to know too!

you can't !!!!!!!!!!!!!!!! its only for included progs

What nirmanakak wants to know is how to customise the X2.
This is done by:
1. Back up your current data and put the .cab files on a micro sd card. Remove sim card just to be safe.
2. Clear Phone (Start>Settings>System>Clear Phone)
3. AFTER you calibrate screen (orange screen, then white) and when you see the green progress bar remove the battery or press the reset button in the back of the phone(remove cover to find). This must be done right after screen calibration or else you have failed to stop the default cabs.
3a. if you were not able to stop the default installation, you must install ClearStorage.cab and use it to start from step 2 above.
4. Install the .cab files one by one.
Here is a web page showing the purpose of each .cab file:
forum.xda-developers.com/showpost.php?p=7098131&postcount=14
If you are not sure what to install, choose the green ones. At the moment it is trial and error and it is all manual. Maybe one day it will be all automatic using one installer This is why I request developers to pitch in to make it easier for everyone.