Database Users

rom flash crash

hi folks tried to update special rom and upon where the XDa comes up with upgrading takes 5mins the software crashed out telling me to remove from cradle and do soft reset well did all that but cant get active sync to recongnise the XDA and the XDA is still on that upgraing 5 minute screen HELP

If it will not resume when you restart the upgrade program on the PC, then it's time to upgrade via the bootloader method. You need (access to)an SD-card reader/writer for the PC, and to read around on this forum a bit.

thanxs I guess thats the conclusion I came to however just to make sure do u know the steps involved in installing the special rom I have the download exe file someones put on the forum

****. I cooked a second ROM (based on testing the first one - and removing utils I didn't need)
Flashing started - but this time, ActiveSync dropped out and I was left with the 5 minutes screen.
I have tried hard reset but only the "upgrading' screen appears. Now I'm wishing I had never messed with it.
I can get the Wallaby Boot loader screen to come up (GSM OK) it says.
But I have no clue about this other "bootloader" method mentioned on this page. Can anyone please advise where can I find details of the fix? Is the ROM really wiped out and no longer recoverable?

I have the same problem as the first person who posted.

Then you will need to restore the OS using an SD card. (Min 64mb).
Probably easiest to cook a ROM at Jeffs Kitchen to your taste:
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Save it as .nb1 type (bottom of that page).
Then get XDA Tools (yes I know its starting to sound complicated but its not really). http://xda-developers.com/XDAtools/
That program allows you to copy the .nb1 file you cooked to be loaded onto the SD card.
Once you have transferred the OS (.nb1) file to the SD, stick it in your XDA.
Turn on the XDA pressing simultaneously the on switch and sticking the stylus in the SOFT reset hole.
You should get a white screen saying something like flash ROM from SD. Press the JOG (navigator) big switch at the bottom to start the process.
Make sure you have mains power to XDA during this process.
When it finishes, REMOVE the SD card and press HARD reset.
Should be back to normal!

p.s. It goes without saying that you need an SD card reader !!
p.p.s I hope yours is better than mine. Try to get the latest version with drivers that can deal with big SD card sizes...

It does not say hard reset it say cold reboot to reset. So I did a soft reset and it worked after about 7 tries.
I really like what they did with this ROM Kitchen. I would think that if they can get this really stable then they should offer a service to create your own ROM's allowing the user to select what programs they want to include in the ROM.

Er, if you read other areas on this site you will notice that this is run by enthusiasts, who are making their work available to others.
So a little please and thank you will ease your way.
Rather than... "they should" maybe "it would be nice if...."
:idea: If you really want to DIY - then follow all the instructions, get yourself a Unix platform and MKROM.
Bye
ps sorry I got one detail wrong.
pps Sorry I bothered actually

Ariel said:
Er, if you read other areas on this site you will notice that this is run by enthusiasts, who are making their work available to others.
Click to expand...
Click to collapse
Believe me as the owner of www.pocketpcminds.com I understand this. Back in the days of carrying a Palm OS device there a program that allowed you to add and delete things in your ROM.
What I was suggestion is a service that users could pay for that would inlude a list of Pocket PC programs that the users could choose what programs they want loaded in the ROM. From what I have seen of Pocket PC users each person has a list of programs that they find useful and use regularly.
I onlt suggest this because the people running this need to cover thier cost. Otherwise they may use intrest and stop it all together.

We're all too busy with other things to turn the ROMkitchen into a commercial thing. But if anyone else wants to do so, please contact us.
Pro:
- It would be a great sales platform for software (spb gprs monitor, PIMs, etc.)
Con:
- Available space shrinks as OS grows
- No idea how this works out on XDA II yet

Can't burn the Wallaby Patch to the SD
When I try to burn Wallaby Patch to SD the following error appears
Failed to open device \\.\PhysicalDrive8
Anyone help with this.

hi I did all that but when the XDA is being flashed it finishes but comes with achecksum error now I know I am doing everything right as I managed to reload O2 original .nb1 file and my xda is still as was however I want the forums version rom so can unlock many thanx for the previous how 2 instructions

SD card flash - 5 min screen
Ariel said:
Then you will need to restore the OS using an SD card. (Min 64mb).
Probably easiest to cook a ROM at Jeffs Kitchen to your taste:
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Save it as .nb1 type (bottom of that page).
Then get XDA Tools (yes I know its starting to sound complicated but its not really). http://xda-developers.com/XDAtools/
That program allows you to copy the .nb1 file you cooked to be loaded onto the SD card.
Once you have transferred the OS (.nb1) file to the SD, stick it in your XDA.
Turn on the XDA pressing simultaneously the on switch and sticking the stylus in the SOFT reset hole.
You should get a white screen saying something like flash ROM from SD. Press the JOG (navigator) big switch at the bottom to start the process.
Make sure you have mains power to XDA during this process.
When it finishes, REMOVE the SD card and press HARD reset.
Should be back to normal!
Click to expand...
Click to collapse
I have a similar 5 min screen, and I tried as told, that is bought a card reader, cooked ROM, downloaded and transferred the nk.nb1 file to sd card using xda-tools, and entered into bootloader. But all I get is WAIT and then GSM OK message. Not the one that gives me option of flashing the ROM. How exactly to transfer the ROM image to SD card?

Rom Flash Crash
Just in case
I found that getting the XDA going initially by putting across the O2 installer programmeA onto the SD card rebootting with soft reset which installs the standard O2 locked phone system however this allows your XDA to be seen by the PC
all I did then was using the Kitchen Rom is double clicked it then goes into install mode through Programme A and does a PC to phone install.
I found I reinstalled twice and the phone now is working unlocked as required
I tried many times to do the soft reset install as instructed on the forum but it just crashed everytime

I guess the WBL version 5.15 does not identify nk.nb1 file as a rom image. it needs the rom image in raw form, the same as it is copied by bootloader that is WinCE to SD. I think the old XDArit writes it in the required format. dont know how the XDA-Tools does it.

ROM flash crash - solved!
It finally worked. With help from ntabikha, a member of this forum, I got it going. I plugged it in the cradle after hard reset. Activesync kept announcing that it can not connect to the device, and I kept clicking "Retry" (perhaps "disconnect com port" might as well have been all right, but I didn't do it. I thought it might disconnect the com port and stop the Program A from connecting to the device).
I then ran the Original Qtek Upgrade installer, and it did not connect on the first attempt. But it asked me to soft reset the device and run the program again. I did so, and whoa! it worked! It worked great! However, I don't understand why the cooked version 3.17 from Jeff's kitchen was installed instead of Qtek Upgrade Version 3.16.52. I care the least though, since I now have a working xda! Thanks to the guidance from ntabikha.

how do i remove programs like "HotSpots" from Star

any 1?
I have programs like: Email Setup, O2active...
1) how do i remove them so that after a HR they will return ??
2) i managed to find Email setup - but after deleting the files - i still have blanc shortcut in Start>Programs saying email-setup (with empty icon).
why?
can i remove only shortcuts but keep the program?

These things you wanna remove are installed everythime you hard reset. THey are programs in the extended ROM. These are customizations to WM5 that the retailer (imate, o2,qtek, t-mobile) put on the device.
If you don't want to install any of these do the following:
1. Hard Reset Device.
2. you'll go thru a series of screens:
2.1 Welcome Message
2.2 Align Screen
2.3 Tap and Hold tutorial
2.4 Password Configuration
2.5 Ending Screen that asks you to press screen to continue.
3. RIGHT AFTER step 2.5 (after you tap the screen) press the RESET hole.
This will bypass installing all the files in extended ROM which normally shown by a progress bar at the bottom everytime you do a normal hard reset.
4. Now you can Install the stuff in the extended ROM one at a time. Only the ones you need to install. To access the ExtendedROM (it is hidden) download Total Commander (search thru google) and type \EXTENDED_ROM in the navigation window and it will display the contents of the extended ROM.
I don't have O2 so i cannot explain to you what each individual .CAB file does. Just use a little guess work. THe O2Active, i believe is easily spotted. It's the biggest CAB file. Don't click on it so it won't install.
Tell me if this helped you out or if you need more clarifications.

Hola Jorge
First of all - Thanks for the great explanation !!
Although I do want most of the stuff, i already tried corporate mode (clean install) but I missed a lot of things.
therefor I installed Basic mode. (which hasnt got ALL the features)
But - some of the features i DO want to take away.
(NOT FROM EXT ROM)
only for now... programs in the Start>Program>
Lets say I wanna take the games away...
where are all the programs installed TO ??
I found some of them. but when I deleted the email setup for instance -
I still have an empty Email Icon in START>PROGRAMS>
(again i remind U - I wanna leave the ext rom as it is)
10x again !!

Some features in the ExtROM are installed in Corporate mode too, the sure way to customize is to bypass ExtROM, then install one-by-one the .CAB files you want.
Anyway regarding the Games, etc. they are part of the OS so cannot be uninstalled unless they came with the extended ROM like Backgammon that came with the JASJAR ExtROM.
To delete the ICON that is blank but still has text, go to \WINDOWS\START MENU\PROGRAMS\GAMES
You'll find the shortcut there. Or just to \WINDOWS\START MENU to see all the oter shortcuts in case you wanna remove other stuff.
The games are installed in WINDOWS and a shortcut is created to the Star Menu Directory. Just delete the shortcut.
What does "10x again !!" mean?

Cant install most of the softwares !!!!!!!!!!

hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?

shadows of yesterday said:
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
Click to expand...
Click to collapse
can't help you or tell you the reason because you are not giving enough details about what you are trying to install, what is going wrong. How are you trying to install. Exe or .cab files. are you just getting error's during the installation

i tried to install .cab & .exe , but it says install unsuccessful, for example SPB & Battery status

mmmm
On what ?... is the cab on the phone or on the PC ???????

i tried both , but i couldnt

You have the HTC Touch Elf right? No cabs at all are instaling on your phone.
Possibiliites:
1. The cab files are being currupted either while you are downloading them or while you are sending them to your phone. FYI Cab files are to be installed via your phone not PC. Transfer the complete cab to phone and just click it to install - Do Not Unzip it. (A cab file looks like it is a zip file or a rar file wen it is on your PC but don't be fooled. it is a cab and does not need to be unzipped) you will only see a bunch of messy files and will just get confuzed. just place the cab on your phone and tap it with your stylus to initiate install
Exe's are to be installed via your PC to your phone through activsinc. place the exe on your desktop (Or wherever) and connect your phone to your PC using Activsinc. Then click the exe on your desktop and follow installation instructions - NOte you will have to still do some clicking on your phone to allow the installation.
2. you are not installing them properly and therfore follow instructions above.
3. your phone is currupt somehow (I don't see how) Try a hard reset and see if the programs will install after that. if not, you might want to return your phone for warranty (I am assuming you just got this phone and this is the first time you are trying to install something.
4. Maybe you have run out of room on your device to install any more applications (if you have been installing tons of other stuff successfully)
I have never gotten any errors installing cabs or exe's exept for when I was trying to install something that my phone did not support. (Not a valid WM application) or something like that.
Edit: You still are not give us much information - What type of error are you getting - What does your phone show/tell you?
Does it start to install and fail half way through? does it not start at all? does it install and the programs just do not run?
Tell us what program you are trying to install - what error you are getting and when you are getting it. Tell us the method you have used to install it etc....
If you want help you will have to provide us with as much information and detail as you can. Otherwise - Good Luck.
I will check back here regularly to see your response and try to help, but if you don't give us much more detail - no one will be able to help you.

Did you flashed your ROM recently?

it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)

shadows of yesterday said:
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
Click to expand...
Click to collapse
I don't know about battery status or wm router but TCPMP is an exe type installation. if you try to install this using your phone by putting the TCPMP installation on your phone and clicking to install, it won't work. You have to put the installation file on your computer, connect your device to your computer through activesinc. then click the TCPMP Installation on your desktop and follow instructions. Make sure you accept installation on your device when your device asks. The others may be the same

i did like that , but nothing changed , same message , install unsuccessful

shadows of yesterday said:
i did like that , but nothing changed , same message , install unsuccessful
Click to expand...
Click to collapse
Are you trying to install to your storage card or to device? Are you certain that you have enough storage space left?
Do you have any problems with Activsinc?
Have you tried downloading another copy of TCPMP - Maybe the copy you have is no good.

yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???

DuelMasterNG said:
Did you flashed your ROM recently?
Click to expand...
Click to collapse
You never answered the above question.
shadows of yesterday said:
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
Click to expand...
Click to collapse
I don't know if I can help you with this problem. I have never had any problems installing anything onto my device even when the app wasn't compatible. usually still installed, just wouldn't run. I am still using official stock WM 6.0 rom that came on my device. (have not ever flashed a new ROM or Radio and don't know anything about that. If you did flash a new ROM or radio, that could be what is causing your problems and you may want to examine in the thread where you got your ROM or Radio from for answers or to see if anyone else is having the same difficulties. Perhaps PM the person who cooked the ROM. If you havn't flashed any new ROM or Radio, then maybe you changed something in your registry that you shouldn't have with a registry editor (just a thought - don't know if you have ever done this) or maybe you have an app on your phone that is causing conflict when trying to install other apps. You can always try a hard reset of your device (if you don't mind starting from scratch again customizing your device) and then try installing TCPMP and see if it works right after a hard reset. That would suggest either something was changed in your registry or that another app was causing conflict. Bit of a pain in the a## having to reinstall everything(unless you don't have much installed on your device) and still no guarantee that it will work. Before doing a hard reset, you might want to look into backing up your device. (I don't know anyting about backing up - what program to use or how much it can back up such as setting or such but you might want to check it out. Also make sure you sincronize your device with your computer prior to hard reset so that all your contacts, appointments etc... are up to date that way after a hard reset you can just syncronize your device again and get your contacts and appointments etc... back.
If anyone else has any suggestions here -- Please feel free to jump in. I know that I would be really annoyed not being able to install new apps to my device.
Good luck. I hope this gets figured out for you
Rod

i had the same problem, it was unbelievably frustrating, i had to restore my X1i to factory settings, that fixed the problem.

I think you should follow hotrod101's suggestion and do a hard reset. Its quite likely that your phone has malfunctioned or something. It's probably going to save you a lot of work in the long run. Or turn in your device in one of the HTC service centers as already stated. Don't forget to back all your stuff up first.
Good Luck.

thanx alot

you did not say whether your rom is original or coked as i met some problems with cocked roms in installing arabic based applications that was easily installed before flashing me device

Did you get things figured out - If so please share with the rest what you did to solve your problem, in case others are having similar problems. Did one of our suggestions help or did you find another solution?

same problem on my Touch Pro, seams to be common ... some say that it is due to the fixed number (50 installed programs) on the touch flue ... however, I have no more information of how did they got this result, or what is the registry of this issue???
I hope if someone help on this to avoide us the headache cused by hard reset, just thinking about it make me crazy.
even hard reset is not a solution.

How to flash htc diamond 2 ?

Can someone put some instructions how to flash our diamond 2 ?
Please help.

Me too!
I've also been reading through a lot of material from xda but aren't confident enough to jump into messing with my diamond2 just yet.
A tutorial/guide would be a big help if someone has the time.
Cheers

Have finally just gotten around to flashing my Diamond 2 for the first time (used to flash my Orbit all the time). And it really is a piece of cake.
1st..... you MUST flash the HardSPL Unlocker to your phone. You can get it in THIS THREAD. It's at the foot of post #1. Also, READ the first two posts of that thread so that you make no mistakes. But in a nutshell:
Download and unzip the Unlocker file;
Sync your phone to the PC;
Run the HardSPL Unlocker from your PC; (Sync connection may be lost at this point so if your PC says new USB device found, say yes to establishing a new connection)
When the flash is complete, your phone will re-boot;
To confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.83.OliNex, which is the Hard-SPL version.
With that done, you are now ready to flash the ROM to your phone. Easiest and safest way is Bootloader method which is best described by duttythroy. So download the ROM you want to try, unzip it and if it's not already so named change the name of it to TOPAIMG.NBH. Copy that file to an empty SD and place the card in your phone and follow the instructions below:
duttythroy said:
SAFEST WAY TO FLASH YOUR ROM IS THROUGH STORAGE CARD METHOD:
* Copy TOPAIMG.NBH into the root dir of your Storage Card.
* Be sure to have at least 30% of charge.
* Turn off your device by using the Power Button.
* Go to Boot loader mode. Push and hold Vol. Down + press Power button.
* After that your device with have a white screen with text " Press to power button for continue upgrade or Press Volume down button for cancel upgrade , select press to power button and it will start upgrade Rom.
+ Video : http://www.youtube.com/watch?v=FbRboNeo2XE
- this video made by wadialdoor ( Thanks u so much ! )
Click to expand...
Click to collapse
When the flash is complete do a soft reset and away you go!
It really is that simple

2 Questions:
- My htc diamond 2 is a free phone, not a operator phone (locked). I have to apply the HardSPL Unlocker ? What for?
- The bootloader method works on a htc original 6.5 rom ? I have to rename the file rom becasuse this is a .exe file?
orry for this questions but i don´t want make mistakes.
Thanks to all.

Hi again,
Not too sure about a free phone needing HardSPL, try searching that thread for more info.
As for renaming the ROM to TOPAIMG.NBH, that is so the bootloader knows that it is an Image to install. All ROMs (to my knowledge) are .NBH files so an .exe file would be of no use.

Original ReadMe NL and EN
README NL: http://www.4shared.com/file/148320582/a873fccf/README_NL.html
README EN:http://www.4shared.com/file/148321684/fbea80c6/README_EN.html

[Q] Xda_uc installation notification

hello to all
i have cooked a rom with Xda_uc it has four folders
*Copy2root
*install uc
*Manual
*Storage
when i put the cabs into storage it install automatically to storage card but when it install it shows the installation page ..;is there is any solution to do its in background without showing the installation notification ..
and what will i do if i want the cab install automatically to device without notification and in which folder i put my email settings provxml,pim backup etc...
will anyone please explain much more about Xda_uc
thanks to all

shafizal said:
hello to all
i have cooked a rom with Xda_uc it has four folders
*Copy2root
*install uc
*Manual
*Storage
when i put the cabs into storage it install automatically to storage card but when it install it shows the installation page ..;is there is any solution to do its in background without showing the installation notification ..
and what will i do if i want the cab install automatically to device without notification and in which folder i put my email settings provxml,pim backup etc...
will anyone please explain much more about Xda_uc
thanks to all
Click to expand...
Click to collapse
I will try to give some hints:
xda_uc has two threads in the forum: one for cookers and another for end users. take a look to learn how to use and take the most out of it.
xda_uc is written in mortscript, by noonski.
you can post there and you will have for sure support from the developer and other active users.
for what I read I recommend you also take a look at sashami by bengalih. You can not find it here at xda, google for it. It is an automatic tool to restore any thing you want either manual or automatic, hidden or not. It is written with the same language.
it is a pending issue that somebody developes and publishes a light shasami that takes care only of the manual/hidden installation parts without launching the front end and autoconfiguration. The code by bengalih is so good! I once did these exercise but I do not keep these files anymore (fool me). You can find similar but not so good solutions in the mortscript compendium thread.