Database Users

Opal Hard-SPL

well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL. and is version 2 (2.00.cmon). also i *think* this one will not hard reset the phone
it's for any OPAL***** modelid now,
thanks to wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder (Opal_HardSPL_v2_0.zip).
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v2.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 2.00.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
UPDATE: How to flash stock SPL back for warranty purposes - please use this only if you need to return device for repair!
steps:
0. first flash entire stock ROM, then after that you can flash stock SPL as *last step*. do not reverse this flashing order please
1. get the RUU_Signed.NBH file from attachment (opalstockspl126.zip (185.3 KB))
2. run hardspl package from attachment (Opal_HardSPL_v2_0.zip)
3. *after* Opal HardSPL EXE extracts files, replace extracted RUU_Signed.NBH with the one from opalstockspl126.zip i.e. when asked to overwrite, say Yes, if it doesn't ask, then you are trying to copy it before running the HardSPL EXE, which is the wrong order.
4. flash just like you flashed HardSPL (see original instructions above)
5. device reboots, you can now check if it says 1.26.0000 or still 1.26.cmon or 2.02.cmon, in the latter case you did something wrong, it has to show 1.26.0000.

Great work, thanks for CMONEX !!!

I don't fully understand what this is for, but looks important soo THANKS

lupacche said:
I don't fully understand what this is for, but looks important soo THANKS
Click to expand...
Click to collapse
it's to allow you to flash any rom PhamQuang is already cooking some rom for opal i believe

OPAL10000 modelid
how do i check modelid?

FINALLY!!!!Congratulation !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

cmonex said:
well i made this a while ago, and finally got around to get it fully tested and release it.
this HardSPL is based on version 1.26 SPL.
it's for OPAL10000 modelid, if anyone has a different model, report in this thread... those should be tested out before doing anything.
thanks for wlinsong and PhamQuang for testing
instructions:
0a) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
0b) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must have the phone synced with your PC, i.e. device must be in Windows Mobile!
3) run Opal_HardSPL_v1.exe.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) device should go to a grey screen
6) go on with RUU, Hard-SPL flashes, device automatically reboots, job done.
7 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.26.cmon
+1: if the screen won't go to grey mode (SSPL), then try manually entering SSPL by using the Opal-SSPL-Manual.zip - run the EXE on the phone then when it went to grey screen, run the HardSPL exe on PC and flash.
finally, donations are always appreciated to the "To Cmonex" link in my signature
now, enjoy the hardspl and cooked roms
Click to expand...
Click to collapse
Thank for your hard working, but there's new issue occour.
When I tried to dump the hardspl, the error message appear"image file corrupted", then the work has been ceased.
If you have any idea about it, please kindly guide me!!

dpauser said:
Thank for your hard working, but there's new issue occour.
When I tried to dump the hardspl, the error message appear"image file corrupted", then the work has been ceased.
If you have any idea about it, please kindly guide me!!
Click to expand...
Click to collapse
Heihei~~ Just read the guide instruction carefully, I have fixed the problem.
And currently, I flashed a HK Rom code on my device.
However, I found a new issue. The this device has Compatibility with the BT ear price. I'm using a Itech D-Clip Radio one. When the call is coming, the call will be actived.But after the call, the BT connection will disconnect.
Any one has idea about this? Thanks a lot to all.

itaychi said:
how do i check modelid?
Click to expand...
Click to collapse
see bootloader screen (tricolour) it will say OPAL100 or similar... if the number is 100 then ok. if not, post in this thread
EDIT: oops, possibly for opal there is no modelid displayed there (could someone verify - i dont have an opal). use getdevinfo in mtty. but easiest is just try the spl package and if you get modelid error, post.

Hi cmonex, can you please make a HardSPL for the Touch 3G (Jade).

congratulations
hope to get fresh news on blackstone
thanks Cmonex

can it be used for htc T2223?
another question:
Can the rom upgrade file in the following link be burnt into my htc t2223?
http://www.htc.com/hk-en/SupportDownload.aspx?p_id=175&cat=2&dl_id=422

hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"

thanx alot for your hardwork

terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
flash the radio as 0x300..

dr33 said:
can it be used for htc T2223?
another question:
Can the rom upgrade file in the following link be burnt into my htc t2223?
http://www.htc.com/hk-en/SupportDownload.aspx?p_id=175&cat=2&dl_id=422
Click to expand...
Click to collapse
if htc T2223 is htc viva, then yes

cmonex said:
flash the radio as 0x300..
Click to expand...
Click to collapse
but i've tried flash the os only , still not work ! u means i need to add the radio into it?

Stickied.
Ta
Dave

terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
terry888_1978 said:
but i've tried flash the os only , still not work ! u means i need to add the radio into it?
Click to expand...
Click to collapse
terry ,
I've got the same problem as you.
vivi

terry888_1978 said:
hi cmonex ! i've try ur hardspl , and i got a problem , my VIVA is hardspl now , but i try to use NBHTOOLS to dump the os.nb out of a WWE official rom and then use htc rom tools to rebuild a nbh file, but can not flash in to my viva . but i try flash that original official rom ,it works , is it my bad ? something i miss?
here is my htc rom tool setting:
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=64
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$301
RadioN=Radio
System=$400
SystemN=System
when i flash my edit rom , the ruu erro is "code 270 Updata erro the image is incorrect"
Click to expand...
Click to collapse
%1 Get a error270,image file corrupted!!!
htcrt.ini
[Opal]
ModelId=OPAL100**
SignMaxChunkSize=1024
SPL=$200
SPLN=SPL
Splash1=$600
Splash1N=Splash
Radio=$300
RadioN=Radio
System=$400
SystemN=System

[TUT] HP iPAQ 61x, 91x Stuck @ Bootloader solition

Hi all.
I have 3 semi-brick iPaq device (612c, 614 and 912c). After do a ROM updrage from a bad miniSD card, these device onli show me HP logo when turn on. I'v search too many time and find a way to bring them back. @XDA-dev, I've saw someone have brick iPaq like me.
You need:
DNW (Include Driver file) http://www.mediafire.com/?zmnmzmwnjtk
Your device's Flash.DIO file. How to make a Flash.dio I'll post later. But you can found .DIO file via searching the web.
How to:
- Open DNW.exe, [Configuration] => [Option], change [Download Address] from 0xc000000 to 0x3000000
- Rename FLASH.DIO to FLASH.nb0
- Bring your Device too download mode: RECORD + OK + POWER or RECORD + OK + Reset to enter Download mode. Note: It's not Quanlcomm download.
- Plug your device to PC, and manually select driver to install (files are in SEC folder)
- Back to DNW.exe and [USB Port] => [UBOOT] => [UBOOT] and select Flash.nb0 just renamed and waitting for programed
I've done with these ipaq last week and return them to my customers. These Combine-key to enter download-mode can be wrong with 9xx device. I'll find another device to test later
This solution can change language of your device to language of .DIO file

How to make a .DIO file:
- You can download ROM update of your device from HP official web site.
- After download, extract (don't run) file to a folder by winrar, 7z or another archive manager. You'll see file named FLASH.NBF
- Open FLASH.NBF with a hex-editor like XVI32, and cut off first 3432 bytes. Then save file as FLASH.DIO.
- Now you can do a flash with this .DIO file and a micro-SD card, or with DNW tool at first post.

Great, thanks Paloma!!!
ipaq 614c resurrected with this great util.
Thank you.
P.D. Hp repair cost me 246 euro replacing all mainboard

Paloma, i have the same problem, but with a ipaq 6915. It is always into initial screen with blue screen and HP logo and in the botton right corner saying "No GSM" and ROM version. I would like test this solution, but when i run UBOOT the program always say, "Can´t open USB Device". I have installed the driver and it still saying the same.
Other cuestion. When you say "Download Mode" it is the same than "Bootloader Mode"?. Thanks

hi Carlengue.
This solution isn't apply to HP 6xxx.
I've got some ideal to help you, but now I ca'n 'cause I'm not at home, without my PC/laptop. I'll PM you later, ok?

i can't find the proper key combination. I've ipaq 914c

@ Carlengue:
Follow this link: www.mediafire.com/paloma and goto folder PPC tool. Download Uni_exitbootloader and run it with your phone plugged and active-sync disabled. Then you can try with one of two ROM I've uploaded (I don't know wich device you have, G3 or G4)
@ Ericco: I'm verry sorry, I'm in traveling and cannot find a HP-9xx now to test combine key for you. Can you try with VOLUME(up or down) + Record (or Camera) and Power (or Reset).
I'm sorry again about this incompatible.

Still can't find the proper combination.

Ok. I found it
Volume UP + OK (on side) + Reset
Rom on my 914c changed from NDL to ENG yeah

Hello Paloma,
Thanks very much for this info.
I have not used it yet but I can appreciate the knowledge since I had a bricked 612c previously and had to wait for 2 weeks for it to be fixed, I tried various software at the time but couldn't get to work.
I would like to kindly ask if you could please explain to us how we could modify a flash.dio or build a custom one. I want to know how I can modify Windows Startup files and decide on what software I want to have installed by default, etc... (that would be greatly appreciated).
Thanks heaps

ericco said:
Ok. I found it
Volume UP + OK (on side) + Reset
Rom on my 914c changed from NDL to ENG yeah
Click to expand...
Click to collapse
Hi Ericco,
i have also an ipaq 914c with italian language version, so i want to change the language into English. If you have done that please send file *.dio and *.nb0 to me via email: [email protected] (becasue im a nobie.., this smartphone is the first of mine)
thank you very much in advance
Rgds,

congtiger said:
Hi Ericco,
i have also an ipaq 914c with italian language version, so i want to change the language into English. If you have done that please send file *.dio and *.nb0 to me via email: [email protected] (becasue im a nobie.., this smartphone is the first of mine)
thank you very much in advance
Rgds,
Click to expand...
Click to collapse
Pls wait, I'm uploading and will give you the link
http://www.mediafire.com/?sharekey=034d5fbf0846aa8ed2db6fb9a8902bda

Paloma said:
Pls wait, I'm uploading and will give you the link
http://www.mediafire.com/?sharekey=034d5fbf0846aa8ed2db6fb9a8902bda
Click to expand...
Click to collapse
Hi Paloma,
Thank you very much, however i have a question
in case after upgrading ROM for ipaq914c, there will be few errors such as: audio or wifi...etc, if my smartphone can be back of ROM-original ?
I am waiting for your answer
thank you again
Rgds,

congtiger said:
Hi Paloma,
Thank you very much, however i have a question
in case after upgrading ROM for ipaq914c, there will be few errors such as: audio or wifi...etc, if my smartphone can be back of ROM-original ?
I am waiting for your answer
thank you again
Rgds,
Click to expand...
Click to collapse
Yes you can back to orginal ROM. Or you can download official WWE-ROM for 914 from HP support site and follow post #2 to get .DIO file

hi,
how can I backup the original ROM before I upgrade into English for warranty?
Is there any way?

ericco said:
Ok. I found it
Volume UP + OK (on side) + Reset
Rom on my 914c changed from NDL to ENG yeah
Click to expand...
Click to collapse
ericco,
can you explain me the exact steps you used? I want to do the same
and if I try the keys it does not work.

congtiger said:
Hi Ericco,
i have also an ipaq 914c with italian language version, so i want to change the language into English. If you have done that please send file *.dio and *.nb0 to me via email: [email protected] (becasue im a nobie.., this smartphone is the first of mine)
thank you very much in advance
Rgds,
Click to expand...
Click to collapse
Were you able to update it? can you explain me how?

Paloma said:
Pls wait, I'm uploading and will give you the link
http://www.mediafire.com/?sharekey=034d5fbf0846aa8ed2db6fb9a8902bda
Click to expand...
Click to collapse
Hi Paloma,
Thank you very much for your kindly assistances. However, after my iPAQ was upgraded with WWE-ROM downloaded from your website, then, my iPAQ was mistaken. it could not load OS, just appears a white color screen and the flash of camera is always light. at the end it stands there
Pls tell me what i have to do
Rgds,

congtiger said:
Hi Paloma,
Thank you very much for your kindly assistances. However, after my iPAQ was upgraded with WWE-ROM downloaded from your website, then, my iPAQ was mistaken. it could not load OS, just appears a white color screen and the flash of camera is always light. at the end it stands there
Pls tell me what i have to do
Rgds,
Click to expand...
Click to collapse
I'm very sorry, I'm on TET (Lunar-new-year) holiday now. I'll back to work after few days. Can you wait?
While, could you try to remove battery for a long time and insert back. Or try to enter boot-loader.
Camera's flash always lihgt => I think it's premotion of hardware failure.

Paloma said:
I'm very sorry, I'm on TET (Lunar-new-year) holiday now. I'll back to work after few days. Can you wait?
While, could you try to remove battery for a long time and insert back. Or try to enter boot-loader.
Camera's flash always lihgt => I think it's premotion of hardware failure.
Click to expand...
Click to collapse
i will wait for you and thanks alot! i hope that my ipaq will be back to life (i have just bought it one month before)

Install ROM with malfunctioning volume button??

Hey
I´m been searching the forum for the last hour and haven´t find how you install a rom with the pc, Can only find the storagecard method..
I want to install the default rom on my xperie because some buttons on the keyboard inclusive the volumebutton so the storagecard method isn´t an option for me..
Could someone help me out ?
thx

Most roms downloaded will come in a folder that has a rom update utility prog. Connect your X1 via activesync and run the program and follow on screen instructions

Thx for the tip,
but the two stock roms that i´ve downloaded here only come with either an .image or .nbh file without any other update utility..
The reason why I have to change back to the stock rom is only to be able to send it on service since the volumebutton and some keys on the keyboard won´t work..
So i´m still looking for a way to install the stock rom without using the volumebutton at the startup..
thx in advance

co56 said:
Thx for the tip,
but the two stock roms that i´ve downloaded here only come with either an .image or .nbh file without any other update utility..
The reason why I have to change back to the stock rom is only to be able to send it on service since the volumebutton and some keys on the keyboard won´t work..
So i´m still looking for a way to install the stock rom without using the volumebutton at the startup..
thx in advance
Click to expand...
Click to collapse
Download a ROM that comes with an installer and simply use that with the stock image.

Verbose Mode OFF :
THESpideyWVU said:
Download a ROM that comes with an installer and simply use that with the stock image.
Click to expand...
Click to collapse
Verbose Mode ON:
Download any ROM that comes with the RUU flasching tool (Xperia GEN, Touch-IT, ...)
Unpack the archive and delete the file RUU_signed.nbh. Rename the original ROM file as "RUU_signed.nbh" and place it in the RUU folder.
Now, flash your ROM with the provided installer.

co56 said:
Thx for the tip,
but the two stock roms that i´ve downloaded here only come with either an .image or .nbh file without any other update utility..
The reason why I have to change back to the stock rom is only to be able to send it on service since the volumebutton and some keys on the keyboard won´t work..
So i´m still looking for a way to install the stock rom without using the volumebutton at the startup..
thx in advance
Click to expand...
Click to collapse
Hello
Ive the same problem with defect buttons....
my qwertz keyboard sometimes is not funcional and the vol buttons doesnt work anymore....
if you have installed a custom rom based on R1A or R2A stock rom you only need the HardSPL package.....
there is an exe file "enterbootloader.exe"...... only copy it to your storage card and then run it on your X1...... now you have entered the bootloader and can do a reinstall/update of your ROM with SEUS and you will get the Stock rom....... after this you only have to install the stock SPL from here: http://forum.xda-developers.com/showthread.php?t=431218
manual is on buttom of the first post.....
Greetz
blacky

[TESTED 100% WORKING] Quickest way to get MR2 for those of you who can't get it!

Im going to try and change my generic_SG to generic_UK after hearing its better. Requesting the extracted files for easy of access for everyone to try to change their language roms.
So this is the steps Im going to try as SOON as somebody generous can upload the extracted UK cabs:
Complete R3A Generic_UK Cab pack : http://www.megaupload.com/?d=35LZ05OO thanks to rx.
NOTE: BEFORE you do ANY of the steps below, make sure to DELETE C:\Program Files\Sony Ericsson\Update Service\db from my computer or you won't get MR2!
1) Do clean install of WM 6.5.2 using the soft-reset during SE customization bootscreen OR just simply clear phone memory located in settings -> system -> clear phone memory.
Detailed steps:
1º Open SEUS, start a new update. EVEN IF IT SAYS YOU HAVE LATEST VERS, UPDATE IT ANYWAY.
2º ONCE IT REBOOTS, CALIBRATION SCREEN APPEARS. RIGHT AFTER CLICKING ON THE CROSSES, IT WILL APPEAR THE SONY ERICSSON LOGO, AND IT WILL START APPLYING THE CABS. PUSH THE RESET RIGHT after it starts applying (hidden behind the stilus, opening the battery cover).
3º After rebooting, the Sony Logo will appear again asking to retry. Press NO.
Credits to dreamcrawler
4) Install ALL cabs to device, soft reset.
5) Update on SEUS, it will say latest firmware already, say YES to install anyway
6) Grats on Generic_UK and hello to MR2 =)
Comments: I AM NOW AN EXTREMELY PROUD OWNER OF THE X2 NOW! NO REGRETS, GOOD JOB SE, THIS IS THE WAY THE X2 SHOULD HAVE BEEN WHEN IT WAS FIRST RELEASED! =)

I would strongly recommend deleting all the files in this folder:
C:\Program Files\Sony Ericsson\Update Service\db
That is where any SEUS updates that have been previously downloaded are stored.

Thanks for the tip, I am currently in the process of installing all the cabs.
Will post results as soon as im done =)

royalbloodvi said:
Thanks for the tip, I am currently in the process of installing all the cabs.
Will post results as soon as im done =)
Click to expand...
Click to collapse
i've also given up waiting for GENERIC_SG so am giving the above a try. i'm about half way through installing the cabs.
its good to see that they have supplied us with Opera so we can choose between Opera and IE

royalbloodvi said:
Im going to try and change my generic_SG to generic_UK after hearing its better, but I am hoping someone can upload the extracted cabs. I KNOW ultra has posted how to do it, but thats why I am requesting the extracted files for easy of access for everyone to try to change their language roms.
So this is the steps Im going to try as SOON as somebody generous can upload the extracted UK cabs:
1) Do steps explained in first step up to the retry but and say NO
2) Download R3A UK rom
3) Extracted cabs from UK rom on SD card
4) On clean WM install ALL cabs? (Is this necessary?)
5) Update on SEUS again, say YES
6) Hopefully it will update it to generic UK
Click to expand...
Click to collapse
It works that way, I had GENERIC EN, I cleaned up the phone to bare Win Mo 6.5.2 (MR1 without SE cabs), downloaded R3a Firmware, extracted the cabs, installed them, upgraded the phone via seus (forced install since SEUS reads the phone and thinks it has MR2 install), and it installed the MR2
So I have a Generic UK phone now

Excellent news, well done for taking the time and effort to trial this method.

Currently installed all cabs, took a pretty dam long while, but now it's updating by force at the moment, hope all goes well and grats to you guys =)

royalbloodvi said:
Im going to try and change my generic_SG to generic_UK after hearing its better. Requesting the extracted files for easy of access for everyone to try to change their language roms.
So this is the steps Im going to try as SOON as somebody generous can upload the extracted UK cabs:
DELETE C:\Program Files\Sony Ericsson\Update Service\db from my computer.
1) Do clean install of WM 6.5.2 using the soft-reset during SE customization bootscreen. NO to retry.
2) Download R3A UK rom
3) Extracted cabs from UK rom onto SD card
4) Install ALL cabs to device
5) Update on SEUS, latest firmware already, say YES to install anyway
6) Grats on Generic_UK and hello to MR2 =)
Click to expand...
Click to collapse
i hve given a try both UK and SG Rom. SG is better the UK with auto rotate and all

Can you please post a link with the extracted UK cabs ?
Thanks in advance!

1st It works with ANY generic_UK cabs pack, older or newer
2nd Its VERY important to delete DB folder before running Update Service

Provide us a link where that generic uk cab can be downloaded...l can not find any where
Found it it is here in another thred

Can someone help with how to extract whats needed from the downloaded ROM? I've downloaded UK_R3AA035 and have followed the instructions but get an error during extraction (error 5 I believe) and it fails to create the files I should have according to your posts. Or could someone post the cabs to copy over?

can somebody please explain me the first step?

I have just found out how to avoid the manual installation of those cabs Very proud of myself.
Use SASHIMI 8 for an automated process of installing the cabs.
I think the manual installation was the most annoing part, and now we've managed to skip it

Could someone be kind enough to upload the cabs for those of us having trouble?
-------------------------------------
Sent via the XDA Tapatalk App

bob2k4 said:
Could someone be kind enough to upload the cabs for those of us having trouble?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
i can not post a link due to the forum limits but i can give it a try the site is out.gr and then add
/downloads/SEX2allcabs_en_mr2.rar

thanks very much. downloading now

royalbloodvi said:
Im going to try and change my generic_SG to generic_UK after hearing its better. Requesting the extracted files for easy of access for everyone to try to change their language roms.
So this is the steps Im going to try as SOON as somebody generous can upload the extracted UK cabs:
DELETE C:\Program Files\Sony Ericsson\Update Service\db from my computer.
1) Do clean install of WM 6.5.2 using the soft-reset during SE customization bootscreen. NO to retry.
2) Download R3A UK rom
3) Extracted cabs from UK rom onto SD card
4) Install ALL cabs to device
5) Update on SEUS, latest firmware already, say YES to install anyway
6) Grats on Generic_UK and hello to MR2 =)
Comments: I AM NOW AN EXTREMELY PROUD OWNER OF THE X2 NOW! NO REGRETS, GOOD JOB SE, THIS IS THE WAY THE X2 SHOULD HAVE BEEN WHEN IT WAS FIRST RELEASED! =)
Click to expand...
Click to collapse
how do l stop this in step 1
1) Do clean install of WM 6.5.2 using the soft-reset during SE customization bootscreen. NO to retry. where to say no??

kronos check you private messages (i odgovori sto pre)

you have to soft reset when you see the "now installing customizations" screen.
after you start the x2 again it will ask you if you want to retry applying the customizations> there's the no button you'll have to tap on!!!

o2 uk users to europe unbranded mango guide

hi i recently came across the new RUU_Schubert_S_HTC_Europe_4.05.401.02_Radio_5.69.09.29a_22.50.50.21_Signed_SCHUBERT_RELEASE rom which is the europe unbranded mango rom i successfully flashed my o2 uk rom to this update without using any of the hspl flashing techniques so this way will remain updateable even through zune so here goes
Step 1- download this rom http://www39.multiupload.com:81/fil..._5.52.09.16_22.33a.50.10U_Signed_by_ansar.zip
Step 2- extract this rom 2 a folder and name it something like update part 1
Step 3-download this file http://api.viglink.com/api/click?fo.../ModelID.fig&jsonp=vglnk_jsonp_13155707623901
Step 4- download this mango rom http://api.viglink.com/api/click?fo..._RELEASE.exe&jsonp=vglnk_jsonp_13155708495051
Step 5 extract the rom you downloaded in step 4 to a folder named update part 2 then drag the modeid file you downloaded in step 3 into your update part 2 folder
Step 6 flash your phone using the romupdateutility exe file in your 1st update folder at the end of this u will receive an error 270 dont panic as this is supposed to happen
Step 7 now time to flash again go to your update part 2 folder this time and click on the romupdateutility exe file and allow it to flash at the end of this you will have a fully unbranded mango 2 rom on your phone with all the updated radios
would also like to think ansar and petbede as parts of there discoveries was used in this guide hope this helps

Trying now, it worked for me to go to NoDo thnks to Petbed. I tried the oter methods to get Mango Final on mine by kept saying invalid vender ID so here goes....

Yes seems to work this way tx...daryld

no probs swanny78 glad i could help

daryld said:
no probs swanny78 glad i could help
Click to expand...
Click to collapse
Great Guide Daryld, Just thought id point out that anyone who is happy to have the HSPL can download DFT's new 7720 build, it is completely unbranded (have an O2 HD7 myself)
Great and simple way to also unbrand your phone

hi guys! quick question - the 2nd one is an application, so where does it extract to? I cant find a way - unless I need a rom extraction utility?

hi jragar if you have winrar just right clight on it and click open wif winrar it will show you all the files then drag them 2 a new folder hope this helps

daryld said:
hi jragar if you have winrar just right clight on it and click open wif winrar it will show you all the files then drag them 2 a new folder hope this helps
Click to expand...
Click to collapse
you learn something new everyday - brilliant mate, never knew about winrar opening exes!

how strange, now I get device not found error 260.
May try rebooting laptop

r u sure u r putting ur phone in bootloader mode u need to do this before flashing and u can do this by turning ur phone completely off then holding the the volume down button only while pressing the power button on u shud see a tricolour screen then when you go to flash it should recognise ur phone let me know if this helps

There may be a misunderstanding occurred.
Try to rename filename and extension from "ModelID.fig" to "ModelID.bmp" (quote not include).
You will see a real file of ModelID.fig..
It's just image not hardware id.
The real hardware id was specific into the Rom in the offset 0x0220.

Quite painless and looks good - installed no issues so far.

does this method require y device to be unlocked ?

I guess doing this way you lose all your side-loaded apps including chevron unlock?

Future Updates?
Does this allow standard updating via Zune? Or will we have to put on the original mango carrier roms when and if they become available?

I followed this and it worked a treat top post
only problem I have is some of my app purchases seem to be lost.....e.g. I paid for PES2011 and now it shows up with the BUY which I am reluctant to click in case I pay twice....any ideas?

I can't find the Modeid file?
When I open up the file in step 3 the files in there are as follows:
RomUpdateutility.exe
Enterbootloader.exe
RUUgetinfo.exe
Rapitool.exe
RUUresource.dll
Readme.doc
RUU_signed.nbh
SPL_Signed.nbh
Enterusb.fig
Enterbattery.fg
Romupdateutlity.cfg
Thanks
EDIT: Sorry ignore my post, about 10 seconds after posting my computer decided to work so got it now thanks

WasStoNed said:
I followed this and it worked a treat top post
only problem I have is some of my app purchases seem to be lost.....e.g. I paid for PES2011 and now it shows up with the BUY which I am reluctant to click in case I pay twice....any ideas?
Click to expand...
Click to collapse
Its fine just click buy and it says its already purchased and then download. The real pain is as you would expect flashing the rom you wont have any saved games but its a small price to pay. Your xbox achievements remain

bing voice stopped working
Guys I now have an issue using Bing voice and speaking and out loud. Keeps saying server not available right now...or words to that effect. Any ideas?

Yeah having the same issue here