Related
Hi again.
I have another question.
When I'm writing an SMS with the soft keyboard I get autocomplete suggestions.
When I'm writing an SMS with the hardware keyboard I don't get that pop-up suggestions (the spell check runs ok ,though).
Is there anyway to have the soft key auto-complete behaviour with my hardware keyboard?
Thanks in advance
I believe this is a way under settings somewere. Ill take a look at my phone tonight for you. If theirs not a setting which is possible because softkeys sometimes have more features their is software out their that will do it for you.
Hi, How can i change the keyboard to another and make it stay after reset?
I change it with the little arrow next to keyboard icon at bottom, but when i restart it reverts back to default one.
I am using bepe's no tom rom.
Thanks
Install this SIP changer cab onto your device. Then access program from the programs folder, select your preferred layout as default... job done
Great, thanks needed also
luuurvly!!! Thanks Very Much!!!
Thanks great work
Change default SIP (Sofware Input Panel)
I installed Spb Full Screen Keyboard and wanted to make it the default SIP (Sofware Input Panel). Some of the pre-installed input methods I never use, hence disable them makes sense. Here are some registry modifications I use.
1. Use a tool like SIPchange to change your default input method.
2. Disable an input method
Disable a keyboard/input method (disable=0,enable=1)
E.g. Disable Transcriber:
KEY_CLASSES_ROOT\CLSID\{F0034DD0-2AD4-11D1-9CB0-E84BE8000000}\IsSIPInputMethod\(Default) = 0
E.g. Letter Recognizer:
KEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod\(Default) = 0
More $SIP_CLSID$ keys
{198D503A-EFFE-4AFD-BC54-EED333C80E6D} = TOUCH KEYPAD
{62B00599-25D2-4E09-8C48-03BF26DB8517} = TOUCH KEYBOARD
{42429690-AE04-11D0-A4F8-00AA00A749B9} = Letter Recognizer
{42429691-AE04-11D0-A4F8-00AA00A749B9} = Block Recognizer
{F0034DD0-2AD4-11D1-9CB0-E84BE8000000} = Transcriber
{42429667-ae04-11d0-a4f8-00aa00a749b9} = Keyboard
{51A2CB38-154E-4C92-A625-A83871C99EC2} = Phone pad
Little bit off topic, but any idea how to really disable XT9? There has been cab etc. around, but they never really worked for me. Every now and then XT9 is on by default when starting to write SMS for example = very annoying.
Yeah i have a similar problem!
i never use the touch keyboard or keypad. but when i use the normal keyboard with stylus that freaking black word-completion bar pops up. even when im in transcriber-mode and want to use that mini-keymap which has only the symbols and digits on it, that bar pops up and even obstructs the minikeymap. that means, when i want to enter a number like 1982, i press 1, then the bar pops up and i have to confirm the one in order to make that ****ty bar disappear and be able to press the 9! means, i have to do every entry twice!!
i thought, this is because word completion is on (even though i didnt understand why there should be word completion in transcriber or a full keyboard), but even after disabling word completion it remains the same. i found out, the only way is to switch to the touch-keyboard or pad and there switch from xt9 to abc-mode. then switch back to keyboard or transscriber and it works, the black bar doesnt appear on every entry.
this is annoying but would be acceptable if it had to be done once every time i switch on the phone.
BUT: as soon as i exit the word doc (because of an incoming call or just because i left it untouched too long and the screen switches off) and enter again, the same freaking problem araises again!
this really drives me nuts, please help me anyone! i have tried disabling the touch keypad and keyboard, but the keyboard still remains the default sip and the problem is the same still..
if anyone has an idea, please tell me!!!!
thanxinadvance
mlehtola said:
Little bit off topic, but any idea how to really disable XT9? There has been cab etc. around, but they never really worked for me. Every now and then XT9 is on by default when starting to write SMS for example = very annoying.
Click to expand...
Click to collapse
This works
http://forum.xda-developers.com/showpost.php?p=1712507&postcount=2
Hi,
I'm looking for a HTC keyborad like those inside bepe's Polaris 0.67 ROM...
The white three combination of keyboard... (Touch Keyboard, Touch Keypad and Touch Qwerty)
Anyone can give me the .cab file?
Thank's in advance
BYE, Bobo
The sipchange Cabs do not seem to work for me. I am using the Aserg ROM and the PCM keyboard, but even after installing the sip cab, it tells me that the sip is not defaulted to the PCm keyboard.
Any ideas if this sip change cab works with the Aserg Rom or what I need to set to make this work?
kwabbernootje said:
I installed Spb Full Screen Keyboard and wanted to make it the default SIP (Sofware Input Panel). Some of the pre-installed input methods I never use, hence disable them makes sense. Here are some registry modifications I use.
1. Use a tool like SIPchange to change your default input method.
2. Disable an input method
Disable a keyboard/input method (disable=0,enable=1)
E.g. Disable Transcriber:
KEY_CLASSES_ROOT\CLSID\{F0034DD0-2AD4-11D1-9CB0-E84BE8000000}\IsSIPInputMethod\(Default) = 0
E.g. Letter Recognizer:
KEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod\(Default) = 0
More $SIP_CLSID$ keys
{198D503A-EFFE-4AFD-BC54-EED333C80E6D} = TOUCH KEYPAD
{62B00599-25D2-4E09-8C48-03BF26DB8517} = TOUCH KEYBOARD
{42429690-AE04-11D0-A4F8-00AA00A749B9} = Letter Recognizer
{42429691-AE04-11D0-A4F8-00AA00A749B9} = Block Recognizer
{F0034DD0-2AD4-11D1-9CB0-E84BE8000000} = Transcriber
{42429667-ae04-11d0-a4f8-00aa00a749b9} = Keyboard
{51A2CB38-154E-4C92-A625-A83871C99EC2} = Phone pad
Click to expand...
Click to collapse
Thanks for this but I have a problem:
"{62B00599-25D2-4E09-8C48-03BF26DB8517}" seems to disable the keyboard but how do you disable the QWERTY?
Bobo Xni said:
Hi,
I'm looking for a HTC keyborad like those inside bepe's Polaris 0.67 ROM...
The white three combination of keyboard... (Touch Keyboard, Touch Keypad and Touch Qwerty)
Anyone can give me the .cab file?
Thank's in advance
BYE, Bobo
Click to expand...
Click to collapse
I need the stock Touch Cruise keyboards/keypads CAB too please! just installed Khanx but it's missing.
cheers,
this works great
sorry wrote this on the wrong thread
Hi All,
I am a newbie to I have a htc touch. I am trying to install Pocket CM keypad on my phone. I downloaded the .cab file from the website and i copied it to my phone using activesync. When i click on that cab file I just get a message Pocket CM installation unsuccessful.
Please let me how to install it. Also i want to install the contact on my phone
Also can someone suggest which is the best keypad software I can install. Also what is the software I have to install to switch the phone from potrait mode landscape mode and vice versa
Best input soft - EzInput
Screen rotation software - Windows Mobile Settings -> |System| -> Screen -> Landscape or tap screen rotation icon on HTC Home Launcher tab.
Thanks for that input. But that will permanently change the screen to landscape mode. I want it only on need basis. That is why I posted.
Besides In my phone i have two keypads. One is touch keypad and another touch keyboard.
The problem is most of the times when not reqd "touch keyboard" which is qwerty shows up.
When i want to type a message or a document then only "touch keypad" shows up.
This is highly irritating. Can somebody help me how to get around this. I want to use the qwerty keyboard for typing messages and working with doc.
I have been reading in the website that it is possible to have the qwerty keyboard working with messaging or while typing email
Can some body please tell me how to enable/disable the 20 key keypad and enable the touch keyboard when reqd.
Please please post a reply
I tried the work around of setting the registry key. but now i am having other problems when i press the green button the call keypad does not come. I also cannot press the button 1 to rotate the screen.
Now I have changed the registry key back now. Now I am back to square 1. The two key touch keypad appears for messaging or email. But i cant get the qwerty keypad.
Can some one point me to the fix for the same please. so that i can use the touch keyboard for messaging.
Many thanks in advance
Man, try EzInput. It looks better, works better and touch keypad doesn't switch to qwerty in some apps - you can choose which do you want! Touch keypad OR qwerty. I'm using it 'cause this switching freaked me a lot and now it's OK with EzInput
Can you please point me to the ezinput cab file and how to install it please. Many thanks in advance
http://www.sendspace.com/file/as1z9v
This is the one I'm using
When I use HW keyboard it always has ABC mode on. I have to use FN key and T9 key to choose T9 manually.
How can I enable T9 to be automatically ON when I use HW keyboard?
Thank you for your help
the t9 always works with a onscreen keyboard. Also if you manage it with a hack a problem would be to where the word suggestions should pop up on the screen.
when someone write a programme for your suggestion than it would be a custom keyboard without letters, only word suggestions and pops automaticly up when the keyboard on the pro is used.
Maybe someone already wrote it.
It would be nice trough
Search for the cab god damn it! There is a cab in one of the ezinput keyboard threads in dev & hacking that allows T9 to always be on (Yes, including the HW keyboard).
Kraize said:
Search for the cab god damn it! There is a cab in one of the ezinput keyboard threads in dev & hacking that allows T9 to always be on (Yes, including the HW keyboard).
Click to expand...
Click to collapse
You don't happen to have a link to this cab at hand, do you? I for one would like to have the T9 always on (even with the hw keyboard), but did not manage to find the correct thread / cab even after an extensive search.
I searched with no result, unfortunately. If you could be so kind to address me to that cab, I would be very grateful indeed.
ninja.rogue said:
I searched with no result, unfortunately. If you could be so kind to address me to that cab, I would be very grateful indeed.
Click to expand...
Click to collapse
Oh that was so hard I almost had to use my brain
First result when searching on ezinput T9 always enable came up trumps...
DeadKeys / T9 as default behaviour for the Fn+Space combo - Full HW Keyboard phones
I thank you very much. Even if I walk around here for years, sometimes it happens that I am not able to find out things. Fortunately there are others who help
You're very welcome, glad to help.
Thanks for pointing out about the keyboard, did you test it and it works?
why not FN + Space It´s working at my device
Because I would like that when I slide out the keyboard I can immediately type with T9 on, without switching it on manually - this is the meaning of "automatically ON"
okaaaay. sry for that, but just tell me the sense of T9 with a "complete" keyboard!?? Do you also have T9 at your computer at home?
comingloud said:
okaaaay. sry for that, but just tell me the sense of T9 with a "complete" keyboard!?? Do you also have T9 at your computer at home?
Click to expand...
Click to collapse
I see a couple of ways T9 is useful with the full keyboard.
1. Words like "won't" can be typed out with w-o-n-t rather than w-o-n-FN-'-t
2. It helps with long words. We can use the arrow keys to choose the word after a couple of letters rather than typing out the rest of the word.
There's a fundamental difference between the keyboard on a mobile device like the Rhodium and your desktop keyboard. On our Rhodium, we have only our 2 thumbs. On a full size desktop/notebook, we make use of all 10 of our fingers.
It seems that we are concentrating on why I have asked to have T9 ON, while I was asking HOW to have it on.
If you don't agree that it is a good thing that somebody finds out how to, simply don't post here
I never used T9 but it supposed to offer words from vocabulary? in my case it doesn't...
well, has someone found a way to make this work on landscape or hardware keyboard ??
having to always activa xt9 is boring ..
(that cab does not work) looking at the registry is changes from 1 to 0 when changing to landscape and it's the htc keyboard doing this. If you activate xt9 and change to the default windows keyboard it works but then you have a small keyboard when on portait.
I agree, the same thing happens to me. The easiest solution is to have it rotate to portrait, pull up the XT9 keyboard and then open the screen.
It's a pain, though. Would love another solution.
Dead key
None of CABs which can be found here are not working the way that if I will press Fn+Sym it acts as deadkey - always T9 dialog is shown. Have anybody idea how to change it?
When I got my HD2 I set two registry settings to below:
HKLM\system\currentcontrolset\control\layouts\e 0010409
\windows\xt9ime.dll change to Ime File :\windows\compime.dll
XT9 IME change to Layout Text : COMP IME
And installed FingerKeyboard 2.1. When I typed in text it would predict what I was typing and show it to me, i.e. if I type "can" it would suggest "can you" (take a look at the attachment).
I had to hard reset my HD2, after which the prediction went away. Anyway to get it back?
So, why did you do that...??? My Leo has the standard keyboard and if you turn the XT9 on, once you start typing a word, a moving bar is displaying the words matching what you've already put into.....
dudu7559 said:
So, why did you do that...??? My Leo has the standard keyboard and if you turn the XT9 on, once you start typing a word, a moving bar is displaying the words matching what you've already put into.....
Click to expand...
Click to collapse
I don't like the the original suggestion method. I like the one in the screenshot as it gives me more options and I like FingerKeyboard better as it has more options.