Related
Hello,
I didn't have any USB connexions anymore on my 32a magic.
In fastboot, no problems.
But with any rom (myhero, GyD, Cyanogen), no USB available !
I don't have the USB mount notification on magic, and have an "unknown usb device" notification on xp.
But the Sd card is ok.
How can I fix it ?
Thanks
Nobody ?
Many Hero owners have this trouble
I checked PID and VID. Both are 0x0000 ! (unknown device)
It sounds like an hardware trouble, but why is it ok in fastboot mode ?
I have exactly the same problem on my 32B... since I bought the phone(second hand), that it has this problem, I have been looking everywhere and I got no answer...
I read somewhere that flashing the SPL could solve the problem, but I haven't tried it.
I flashed to SPL 2010 yesterday... no improvements.
mika91 said:
I flashed to SPL 2010 yesterday... no improvements.
Click to expand...
Click to collapse
Humm, thats bad news
I have the same problem on my MT3G after the motherboard on my gaming rig blew, the phone just went dark and it also destroyed my usb jump drive that was plugged in next to it. It (usb jump drive) was really hot to the touch when I pulled it out. I smelled something burning from inside the computer, I never did figure out what it was. Now when I plug the phone into my loptop all the phone does is charge, the computer wont see it and neither does the phone ask to mount. The sd card is still good but now I either have to use a card reader or transfer files through bluetooth.
I wiped, formatted, "mount usb" through the recovery, flashed different roms, nothing works. I guess I damaged the circuit board or the usb port somehow. I wanna call Tmo for a warrenty replacement but then Ill have to flash back to the original spl and ROM. I dont really want to go through the rooting process again. Is there a way to find out for sure if it is the software or a hardware issue? Like some kind of test through the terminal?
phatmanxxl said:
I have the same problem on my MT3G after the motherboard on my gaming rig blew, the phone just went dark and it also destroyed my usb jump drive that was plugged in next to it. It (usb jump drive) was really hot to the touch when I pulled it out. I smelled something burning from inside the computer, I never did figure out what it was. Now when I plug the phone into my loptop all the phone does is charge, the computer wont see it and neither does the phone ask to mount. The sd card is still good but now I either have to use a card reader or transfer files through bluetooth.
I wiped, formatted, "mount usb" through the recovery, flashed different roms, nothing works. I guess I damaged the circuit board or the usb port somehow. I wanna call Tmo for a warrenty replacement but then Ill have to flash back to the original spl and ROM. I dont really want to go through the rooting process again. Is there a way to find out for sure if it is the software or a hardware issue? Like some kind of test through the terminal?
Click to expand...
Click to collapse
Humm, that means that we might have something "fried" on our phones
The weird thing is that I can access usb through fastboot... Are you able to use fastboot on your phone?
It really would be interesting if there was any way to check if it really is an hardware problem or software problem.
Has anyone else got a clue on this one?
If we can access USB in fastboot, it sounds like a software problem to me.
But after trying several roms and spl, no changes.
I would try to flash a new SPL, but if I do that I won't be able to put back the original SPL and may not take it back to HTC and repair it under warranty... I will wait about a week or so, put back as it was originally, and send it back to HTC and see if they will repair it.
Game Over for me !
I tried some SPL, but now my sapphire is bricked !
:'(
mika91 said:
Game Over for me !
I tried some SPL, but now my sapphire is bricked !
:'(
Click to expand...
Click to collapse
That's weird, what spl have you used and what was your initial spl? How did you flashed that SPL?
I tested all SPL I think !
But the last i tried sould be 1.33.2004.
Now, phone locked on TIM logo screen, impossible to go into fastboot or recovery, even with unbrick hacks found on the forum
If it gets to the operate logo, I guess that you should be able to get to recovery rom...
Can't you get to hboot mode(volume down + power on) , or to fastboot mode(back + power on)?
Nop !
I tried all combinations: Volume Down + power on, Back + power on, Home + power on.
Same result! Operator Logo
Hello fellow HD2 users,
I've got an HD2 T-Mobile UK. I've just tried my luck with HSPL, I've succeessfully installed HSPL using the steps in this thread: http://forum.xda-developers.com/showthread.php?t=609477
However, when I copied the LEOIMG.nbh (1.48 offiicial rom) file to the micro SD 8GB card; and rebooted, things seemed ok untill it suddenly stopped the progress of flashing the ROM and gave me a Grey screen with the Error 00028002 "not Allow" sort of thing.
So I tried yanking battery out, rebooting normally, it displays a grey triangle with " ! " in the middle and then displays the 00028002 error then back to Tri colour bootloader, I noticed that the HSPL is gone and its back now to 1.42.0000
I even tried a Factory reset, it does the reset I reboot, but it still shows me grey triangle and same routine. I've tried everything now. This bloody T-mobile phone is just useless to me at the moment !
Can you please HELP !!! Thank you so much !
Regards !!
Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...
You cannot flash official ROMS from the sd because it replaces the SPL with a stock one. Presume it got half way through then decided the ROM was not for your device since it hasd replaced the SPL. Cooked ROMS are ok to flash from SD but for Stock use the RUU.
tell me it's working please.my HD2 from UK T-Mob is same "bricked" and in Slovakia is very very difficult to find somebody who can fix this....i think maybe only the HTC repair center
^
If your phone can load up into the boot loader (tri-color screen) your phone is not bricked.
Deeper Trouble:Same error,but cannot use USB!!!
Guys,
im in even much deeper **** now.I accidentally tried flashing a stock ROM via SD card and now ive gt the same ROM code error.What makes this worse is that my Vista computer is not recognizing any USB connection when i connect my HD2 to the computer.If i need to flash a stock rom via RUU wrapper to get through this stupid ROM code error, i need a USB connection at the first place...which IS NOT WORKING NOW!!!...im sitting duck here guys...i really really need your help on this one.im extremely frustrated and helpless.thanks alot...
When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.
samsamuel said:
When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.
Click to expand...
Click to collapse
Go to this thread Sam as kawshigan started a new thread
semo2010 said:
Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...
Click to expand...
Click to collapse
broken link
Hi guys!
I have a weird USB problem on my Vodafone HTC Magic. I can't use it as a mass storage device when I connect it to my laptop. When I connect it to a windows machine, it just give some error saying that the installation of the device has failed and nothing from there.
While connecting it to a Linux machine, nothing happens, nothing is mounted, and no new device is created. Also, lots of errors shows up on syslog...
I can not also use the adb tool to communicate with the phone, since it doesn't find the phone...
I though it could be an hardware problem, but the weirdest thing is that I can access the phone using the fastboot method with no problem, I have already changed the bootsplash image using the fastboot to check if it was really working, so, I guess its not na hardware problem.
The phone had the 1.33.0007 original SPL, now is with the eng 1.33.2005 SPL and running the latest CyanogenMod. I have tried tons of roms, but the problem persists in every rom I tried...
Does any one has a problem like this one?
Is there anything I can flash to put the phone completely stock, just as it came of the factory? I now that the roms that we flash, usually are missing some things, like the Radio and some other stuffs... Maybe those some other stuffs are some what "crazy" and need to me flashed again.
Note: I can not get the phone to warranty since I have no the receipt of buying the phone...
I will appreciate any answer
Did you install SDK and install the appropriate USB drivers? Sounds like that could be your problem.
Yeah, I did installed the sdk...
Also, I tried a friends HTC Magic on my linux machine with the same cable, and it worked ok...
Finally I found some guys with the same problem as me, although its on HTC Hero, the problem is very similar. Michael S on Modaco already solved is problem by running some weird, hidden and undocumented commands of fastboot.
http://android.modaco.com/content-page/299174/no-adb-no-sd/page/80/
Will give some more time to run those commands on mine and see what happens.
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
install windows mobile device center to your pc.otherwise it doesn't recognize it.
I have installed WMDC. But it doesn't recognize it at all.
but cwm isnt flashed from bootloader? r u using magldr or clk?
MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing
try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)
after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see
[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks
Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable
After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?
Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App
Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.
My phone got a little liquid on it and after that it frozen so I did a soft reset and now my phone is freezing on android boot screen every time. The problem is what my MAGLDR is not working properly now too and my ClockworkMod Recovery is not working at all, so I don't know how to reinstall soft now. The MAGLDR is kind of flashing always and its hard to control as sometime its not reacting to my button push. And then I try to go into ClockworkMod Recovery its just starts loading, does that 1234 go and it freezes on it, every time. But besides all this stuff my phone looks like working fine, just looks like it just has some software damage. I think it should work with a new soft if not at least I can send it to my insurance as I will change a soft back to normal, because now my insurance will not fix my phone as it freezes on android boot screen so whey will see that I have android and not windows. Waiting for any good advice. Thank you
Btw. My original boot loader is not working too, I can't get in to it. I think its because of the android.
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
A.J said:
i suggest flash the stock rom first , then do all the work again flash MAGLDR and then recovery and then the android rom you want to use and read the instruction for your device if you using hd2 EU or hd2 T-Mobile ... good luck
Click to expand...
Click to collapse
That's what I waned to do, but last time when I tried to connect it my computer couldn't find my phone. That's why I'm asked for a help here. I will try to connect it later today, after I come back from my work and I will post it here, if its connects or not
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Sw1pe said:
So yes, like I said before I cannot connect my phone using MAGLDR. USB Mass storage is working fine, when using USB Flasher my computer detects my phone but when I try upgrade a soft, I get connection error, it cannot find my phone. I don't know any other ways to connect my phone as I cannot get into boot loader Any help???
Click to expand...
Click to collapse
'USB mass storage is working fine'
You may be able to flash a stock ROM from the SD card but I think it involves the bootloader. Have a look at This thread and see if it helps (I CBA to read it properly, sorry )
Thanks, but yes it involves the bootloader
Does Bootloader normally work if MAGLDR & ClockworkMod Recovery is installed on device?
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
A.J said:
yea man its working fine in my phone .... okay how about if you get your phone and connect it to another pc ... maybe the wrong with your pc ... and run the usb flasher and flash the stock rom bro
Click to expand...
Click to collapse
Yeah that's a good point. If you can, trying PCs with different versions of Windows could help (i.e. XP, Vista, Windows 7 etc.)
Ok so I managed to connect my phone via USB Flasher on my work computer and I installed "[30.DEC.10][DFT]LEO "Stock Desire" NAND Android ROM" without any problems but my phone still stucks on DFT Boot screen. I also tried to reinstall MAGLDR and ClockworkMod Recovery to get Clockwork Recovery work but it didn't work, it didn't change anything. Does any one have any ideas what can I do next? Is it possible to install wm 6.5 via USB Flasher? As I know it needs bootloader Does any one have more ideas how to fix it?
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
A.J said:
yea bro install the stock rom as wm6.5 using the usb flasher ... get it back to the stock then re-install any rom you want
Click to expand...
Click to collapse
I can't! Because wm 6.5 requires connection between bootloader or active sinc, there is not other way when instaling wm 6.5, and none of them work now on my device
take a look here, we have the same issue too... http://forum.xda-developers.com/showthread.php?t=899628&page=7