Everytime i try to start JETware on my touch pro II i get the warning "Unable to load the jetware hands-free extension. You're phone may not support this version of the extension".
Did anybody got jetware working on this type of phone?
I realy need a program like this to get my JVC bluetooth car-kit working properly.
Plzzz help me!
Thnx!!
jasparsteenman said:
Everytime i try to start JETware on my touch pro II i get the warning "Unable to load the jetware hands-free extension. You're phone may not support this version of the extension".
Did anybody got jetware working on this type of phone?
I realy need a program like this to get my JVC bluetooth car-kit working properly.
Plzzz help me!
Thnx!!
Click to expand...
Click to collapse
As HTC decided not to use the Microsoft Bluetooth stack in the TP2 I think you will be out of luck, as Jetware say their product won't work with other stacks.
This is causing many people problems so wait till the ROM chefs here start releasing new ROMS and see what comes along!
Gordon
Related
Hi
I have just installed the pocket bluetooth tools from http://bluetooth.i-networx.de/index_e.html which has sorted out my bluetooth GPS, but now my parrot hands free kit doesnt work.
Any suggestions?
Cheers
JustinP
which parrot system do you have and what firmware
tested qtek 2020 1.66 without Bluetooth Tools
DriveBlue 3.13 o.k.
CK3000 3.13 o.k
CK3100 4.02 o.k
CK3300 4.02 o.k GPS tested with Destinator 3 :roll:
CK3500 4.02 o.k GPS tested with Destinator 3
Hi
I have ROM 1.60, the parrot worked until I installed the bluetooth tools, and now it doesn't
Cheers
JustinP
so uninstall bluetooth tools
I have unistalled the bluetoth tools, and the parrot now works, but as predicted the gps does not.
I need both of these thing working, and if they dont the device will be going back.
I cant beleive how unfinished the spv-m1000 is.
JustinP
justinp said:
Hi
I have just installed the pocket bluetooth tools from http://bluetooth.i-networx.de/index_e.html which has sorted out my bluetooth GPS, but now my parrot hands free kit doesnt work.
Any suggestions?
Cheers
JustinP
Click to expand...
Click to collapse
same here
i deinstalled bt tools. only solution to get my parrot ck3000 v3.13 working correctly (most of the time)
regards ize|man
I do have the same problem.
But I'm not using a GPS right now and running without Bluetooth Tools. Like izeman said, this way it's working most of the time.
Currently I am planning on buying a bluetooth GPS Receiver and am pretty much interested in an solution.
So if you find one, please let us all know.
mobileprofi said:
CK3300 4.02 o.k GPS tested with Destinator 3
CK3500 4.02 o.k GPS tested with Destinator 3
Click to expand...
Click to collapse
Can you post your experience with CK3x00. How is it working with XDA II? Like CK3000 or better?
I am not able to use the latest version of BT Tools too because of the CK3000. Try the previous version. My Carkit works ok, but I dont have GPS.
Ian
IanF said:
My Carkit works ok, but I dont have GPS.
Ian
Click to expand...
Click to collapse
by "working OK" do you mean that soetimes it doesn't connect?
Or is it just 'cos the features are limited with XDA II and else you are perfectly happy :?:
...
Madcap Magician said:
by "working OK" do you mean that soetimes it doesn't connect?
Or is it just 'cos the features are limited with XDA II and else you are perfectly happy :?:
...
Click to expand...
Click to collapse
Features are limited, the caller gets echo (but that I am sure this is just an installation issue), without a mount it is impossible to dial while on the move and I still tend to plug it in to charge it while on the move (cig lighter).
Its not as good as I thought it would be and I am thinking of going for a fixed installation. This is no reflection on the kit, just the way I use it.
Hope this helps?
BT tools Plantronics, Parrot and Seefree
I got a slightly different problem. I have a bt headset m3000 plantronics, a parrot CK300 v3.13 car kit (my car) and a seefreekit 1.1 (in my wive's car which I borrow sometimes...). With the BT tools both the plantronics and seefree work ok, but the parrot doesn't bond/pair anymore.
Any solutions? Suggestions? When I de-install the parrot works ok, but then I need to pair everytime another device when I want to use it.
Hi,
If you are using BT Tools v 1.1.0.0 (12.4.2004) it wont. You need to go back a version.
Ian
so with version 1.0.1.2 it should work? :?
PTD said:
so with version 1.0.1.2 it should work? :?
Click to expand...
Click to collapse
Works for me.
Re: BT tools Plantronics, Parrot and Seefree
I tried a previous version of BT tools... doesn't work. Any ideas? But de-installing works fine. But I can only connect one headset (BT Tools recognizes both the plantronics as the parrot as a headset and without BT Tools it can manage only one headset. But then... with BT Tools it doesn't wordk at all...)
PTD said:
I got a slightly different problem. I have a bt headset m3000 plantronics, a parrot CK300 v3.13 car kit (my car) and a seefreekit 1.1 (in my wive's car which I borrow sometimes...). With the BT tools both the plantronics and seefree work ok, but the parrot doesn't bond/pair anymore.
Any solutions? Suggestions? When I de-install the parrot works ok, but then I need to pair everytime another device when I want to use it.
Click to expand...
Click to collapse
Hi!
Recently I Bought a XDA-II and now i want to use it with my Sony Ericson HBH-15 bluetooth headset but XDA doent pair with it...
Kindly guide me in how to overcome with this problem or XDA doesnt support this pirticular models..
----
Sanjeev K Purohit
Had the same problem with my HBH-10, but found the solution.
You have to pair your HBH-15 with a Ericsson Phone, and then change the default passkey 0000 to a diffrent one, and then it should pair with your XDA II.
How to do so, check here
wormeyman.com/downloads/HBH10-R3B-EN.pdf
under 'changing the passkey'
A NEw Problem Now!!!
Thnx a lot bro!
But Now thr's a new problem..
Untill using MS bluetooth stack the call used to get transferred to HBH-15 but since I've installed Widdcom Bluetooth stach The widcom can pair with HBH but cant connect..
When I turn it Off and turn On MS bluetooth It transfers the call occasionally may once in five times...
Isnt thr a sure shot way(kinda some tool that will transfer the call to headset straight away...
Regards
Sanjeev :arrow:
yeah, but that's still the problem that no one got the Widcomm stack working a real 100% reliable. I know tha MS BT sucks because of the many missing profiles, and even worth it's not very 'stable' on my Magician, but still the best option. Sorry mate, but you probably have to live with it the way it is.
Hi guys!
I have my Magician (QtekS100) for over a year now, and I've been always very happy with it. One of my best purchases ever.
It has never gave me any problem until recently when I decided to purchases a GPS Bluetooth (Nokia LD-3W) and my nightmare started.
After many days of trying things, turns out this GPS is a bit special and doesn't like all BT Drivers/Roms.
As the Normal MS drivers won't work and I have to use others.
In your opinio what is the best BT Stack software?
My magician currently is ROM 1.06.03 ESN, ExtROM 1.06.117ESN, Radio 1.05.00, Protocol 1137.39 with the Toshiba Drivers.
Should I upgrade it to a new ROM?
bchuertas said:
Hi guys!
I have my Magician (QtekS100) for over a year now, and I've been always very happy with it. One of my best purchases ever.
It has never gave me any problem until recently when I decided to purchases a GPS Bluetooth (Nokia LD-3W) and my nightmare started.
After many days of trying things, turns out this GPS is a bit special and doesn't like all BT Drivers/Roms.
As the Normal MS drivers won't work and I have to use others.
In your opinio what is the best BT Stack software?
My magician currently is ROM 1.06.03 ESN, ExtROM 1.06.117ESN, Radio 1.05.00, Protocol 1137.39 with the Toshiba Drivers.
Should I upgrade it to a new ROM?
Click to expand...
Click to collapse
new blue tooth stack isnt out yet.
the old bsch stack works fine.. has a few bugs..
the toshiba stack and the Bluesoleil stack is very buggy
cya
Bluesoleil wasn't buggy for me when used for wireless internet. What I didn't like was its incompatibility with my headset. And I'm not willing to switch every time so I returned to MS. I'd love to use the new BCHS stack, but noone's got it right now.
Btw: why did you just copy & paste? Please correct it, there are only BT stacks!
Btw2: please tell me the difference between "O2 MINI NEW BLUETOOTH STOCK" and "BT STACK(BCHS)" :lol: :lol: :lol:
Chatty said:
Btw: why did you just copy & paste? Please correct it, there are only BT stacks!
Click to expand...
Click to collapse
Yes, I did copy from the Subject on other posts.
As far as I know the correct word is Stack and Stock is just misspelled
Stack applies to any Implementation of networking protocols, not just bluetooth.
http://en.wikipedia.org/wiki/Protocol_stack
You just got to love the Wikipedia!!! :wink:
BT Tools is the solution (for me at least)
try "bluetooth tools" this was the solution for me when I had Magician. worked for me with several BT GPS units + TomTom 5.21 and Falk/MarcoPolo Navigator 2004-2005
http://bluetooth.i-networx.de/index_e.html
I did not have any problems with my GPS receiver with either of the stacks. And I do know what a stack is. That's why I asked you to correct the spelling mistake.
I use Bluesoleil and am half-way happy.
Unfortunatly I cannot use MS stack because after some time it gives me the error about "please turn flight mode first", even if it is off.
Anyone know how to fix this?
Re: BT Tools is the solution (for me at least)
aleksandr said:
try "bluetooth tools" this was the solution for me when I had Magician. worked for me with several BT GPS units + TomTom 5.21 and Falk/MarcoPolo Navigator 2004-2005
http://bluetooth.i-networx.de/index_e.html
Click to expand...
Click to collapse
does this support a2dp
re
best is windcomm (broadcomm)!!!!!!
who have working version for magician?
johancz
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
By the way, NOKIA support says that the BH-801 only supports;
Bluetooth 2.0, 1.2 and 1.1 specification,
Handsfree 1.5 (HFP) and headset 1.1 (HSP) profiles.
Erik_S said:
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
Click to expand...
Click to collapse
I could not give you an answer to your problem, but can only let you that the Nokia HS-12W works great on the new AKU 3.3 ROM's. I have the WWE version on my TyTN and the only change I had to make was to activate the stereo setting in the A2DP registry.
Previously I had great deal of problems getting the same headset to work on the SA ROM 1.35. Bitpool changes in the registry as well as Sleuths A2DP fix were necessary.
By the way I have also had amazing results with the HTC BH S100 Bluetooth stereo headset. The great thing about this device is that it allows the user the option to use their own favourite 3.5mm headset.
Regards
Hi, and thanks for your reply.
It´s seems a bit tricky to get it working, fiddeling in the program isnt something as I would prefer getting in to, as I´m a noob!
But can anyone see if the profiles that NOKIA demands is supported in TyTN?
And if so, how can I get there??
By the way, I have a swedish TyTN with following setup;
ROM-version: 1.18.263.2
ROM-datum: 07/22/06
Radioversion: 1.07.01.10
Protokollversion: 32.40.7010.02H
ExtROM-version: 1.18.263.104
Thanks!
i have installed Helmi's wm6 on my siemense sx66, everything works fine but the bluetooth handsfree and sync.
My Pda can find the bluetooth headset which works fine with old version ppc2003, but can not pair and can not connect with it. i have already installed the HELMI_BA_WM5_BT1.7_TEST.CAB and Helmi BT Speed and Helmi Enable MS BT. but still same.
i have installed syn4.5, first time no problem, and then, just running the connecting always.
can anyone have the same issue and have solved the problems? i tried many days to search all threads here to find some solutions, but i failed.
help! help! Help!!!
thanks! thanks!! thanks!!!
Marry Christmas!!!
andyxiapda said:
i have installed Helmi's wm6 on my siemense sx66, everything works fine but the bluetooth handsfree and sync.
My Pda can find the bluetooth headset which works fine with old version ppc2003, but can not pair and can not connect with it. i have already installed the HELMI_BA_WM5_BT1.7_TEST.CAB and Helmi BT Speed and Helmi Enable MS BT. but still same.
i have installed syn4.5, first time no problem, and then, just running the connecting always.
can anyone have the same issue and have solved the problems? i tried many days to search all threads here to find some solutions, but i failed.
help! help! Help!!!
thanks! thanks!! thanks!!!
Marry Christmas!!!
Click to expand...
Click to collapse
I had the same problem the only solution is to uninstall HELMI_BA_WM5_BT1.7_TEST.CAB and all the patches that go with it. I think HELMI_BA_WM5_BT1.7_TEST.CAB does not work with WM6. HELMI Please and all the experts can you look into this, I would love to use it.
Thanks
Wils
I have xplode latest ROM on my Siemens SX66 and I dont face those problems. I had updated to WM6 straight from WM2003SE
andyxiapda said:
i have installed Helmi's wm6 on my siemense sx66, everything works fine but the bluetooth handsfree and sync.
My Pda can find the bluetooth headset which works fine with old version ppc2003, but can not pair and can not connect with it. i have already installed the HELMI_BA_WM5_BT1.7_TEST.CAB and Helmi BT Speed and Helmi Enable MS BT. but still same.
i have installed syn4.5, first time no problem, and then, just running the connecting always.
can anyone have the same issue and have solved the problems? i tried many days to search all threads here to find some solutions, but i failed.
help! help! Help!!!
thanks! thanks!! thanks!!!
Marry Christmas!!!
Click to expand...
Click to collapse
After installing HELMI_BA_WM5_BT1.7_TEST.CAB... you should not install helmi enable MS BT... maybe this is the problem... BT1.7 is the broadcom version and you are patching it with ms bt cab... you only install the helmi enable ms bt if you are moving back to ms bt...
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga