I used to use the O2 6.1 ROM. It updated from 6.0 fine.
Then I flashed HardSPL and a 6.5 ROM. I tried to go back to O2 6.1 but I got stuck in the bootloader screen. The update stopped at 34%.
So I used NueTTY to run the set 16 0 and Task 8 commands. My phone rebooted into 6.5 again.
So I went back to the original 1.25 SPL, flashed using O2 6.1 and this time it stopped at 39%. I reused NueTTY to get back into 6.5.
I went back to HardSPL and flashed using a 3lit3 ROM. This flashed fine.
So... Every time I try to flash my phone using the 02 6.1 it freezes and leaves me in the bootloader screen.
Ive actually tried many more times. Using all three original SPLs I could find, ive tried flashing when its in the bootloader screen but it stops at 0%. I really want to go back to the original O2 6.1 ROM I had in the first place.
Does anyone know what I might be doing wrong?
Looks like you're using radio 1.65x, that radio won't let you go back to any lower version of radio, I also have an original XDA Orbit2 and sometime before I went back to original O2 ROM with no trouble at all using HardSPL so if you do, use this guide: http://forum.xda-developers.com/showpost.php?p=3777108&postcount=430 and you'll be able to flash your original O2 ROM.
Be careful using terminal, that's the easiest way to brick your device if you don't know what you're doing.
Thanks for the reply.
It was a radio problem.
The camera button is broken on my phone! so I just tried to flash the phone (knowing it would leave me in the bootloader) and then flashed with the 1.64.08.21 radio.
The O2 rom flashed fine!
Got there at last.
Many Thanks!
Related
I have an unlocked Orbit with Wm6 on it and trying some of the modded roms and always goes to about 3% and fails saying error 270
any ideas pls guys
have even tried flash via SD card
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
still no joy
I'm having the same problem.
Just got my XDA back from screen repair, previously I had it flashed with B&B v4.1.
I put in back to the O2 rom before sending it off for repair.
Now it's back when ever I attempt to reflash the B&B Rom it refuses to accept the update and bomb's out @ 3% with the same error as this guy.
The phone is sim free, (it's got a vodafone sim in it at the mo) and I have run the uspl unlock, but no joy i've tried various ROM's and they all fail at the same point?
Any body got any thoughts?
Thanks
ipdialup said:
I'm having the same problem.
Just got my XDA back from screen repair, previously I had it flashed with B&B v4.1.
I put in back to the O2 rom before sending it off for repair.
Now it's back when ever I attempt to reflash the B&B Rom it refuses to accept the update and bomb's out @ 3% with the same error as this guy.
The phone is sim free, (it's got a vodafone sim in it at the mo) and I have run the uspl unlock, but no joy i've tried various ROM's and they all fail at the same point?
Any body got any thoughts?
Thanks
Click to expand...
Click to collapse
are you guys running vista ?
No i am on XP Pro sp2
ipdialup said:
I'm having the same problem.
Just got my XDA back from screen repair, previously I had it flashed with B&B v4.1.
I put in back to the O2 rom before sending it off for repair.
Now it's back when ever I attempt to reflash the B&B Rom it refuses to accept the update and bomb's out @ 3% with the same error as this guy.
The phone is sim free, (it's got a vodafone sim in it at the mo) and I have run the uspl unlock, but no joy i've tried various ROM's and they all fail at the same point?
Any body got any thoughts?
Thanks
Click to expand...
Click to collapse
Same Here , and im running vista (Tinyvista)
hmm yeah I am running vista, I do have access to a Windows XP machine do you think the problem is vista related?
However I did manage to flash the same phone before using vista to get the B&B v4.1 Rom on it before the screen packed in?
After a bit more too and fro'in, managed to flash my phone with the 02 WWE v2.1 Premium rom (with touch flow) using vista, however I noticed that the boot loader for this rom appeared to be a different one to the B&B roms (WWE little linux pengiun on screen, B&B Rom, colored bars on screen).
So at least I'm not on the standard O2 Rom any more, but still puzzeled as to why I can't flash the B&B Roms no more?
Hi
I seemed to have killed my phone tonight. Originally I flashed it with HardSPL then udk Vega firmware. It seemed to work OK but TomTom wouldn't work so I tried to flash it with something else. Now it boots up with the udk Polaris flash screen and then it dies. The screen is vagually there but there is no USB connection (either through Activesync or the firmware software). The bootloader screen is showing:
POLA100
SPL-1.28.0000
CPLD-2
I've tried lots of different firmwares, the original will not install (1.25.405.1) the error is 294 INVALID VENDOR ID
Has anyone any idea how I can fix my 1 month old phone please?
Kevin
first of all,
it looks like you haven't succesfully installed hardspl
if i remember, you shold install the original rom by manualy going into bootloader (camera+reset).
After that, try and install hardspl again.
hope this helps
My phone has died to. I used it today and sudently I can not unlock it. It want either hard reset or manualy go into bootloader. When it rings, I can answer and talk, but tapping the screen do not work. I am using the Glass rom, and have used a lot of different rom`s, and it has worked perfekt all the time. To enter bootloader (camera+reset)? or (on+camera+reset)? Any tips to unlock so i can install a new rom?
camera + reset = bootloader
reflash
All sorted now, I downloaded and applied the original Australian ROM and it worked a treat. I've now properly installed HardSPL and I'm playing around with all the different ROMS
kevinbloomfield said:
All sorted now, I downloaded and applied the original Australian ROM and it worked a treat. I've now properly installed HardSPL and I'm playing around with all the different ROMS
Click to expand...
Click to collapse
Where did you get this original Aus ROM? can you post a link?
Where did you get this original Aus ROM? can you post a link?
http://forum.xda-developers.com/showthread.php?t=381600
kevinbloomfield said:
All sorted now, I downloaded and applied the original Australian ROM and it worked a treat. I've now properly installed HardSPL and I'm playing around with all the different ROMS
Click to expand...
Click to collapse
Just amazing.... My device was considered dead as well till I try and updated with the Aus original ROM! And now I'm back to business!!!!!
Thank you all my friends!!!
Direct link to the ROM:
http://www.asia.htc.com/download/RU...5.65.30.04_1.58.21.23_polaris_murata_Ship.exe
Original SPL?
Is here any chance to load original SPL. To pola100. THX
eyeless1978 said:
Is here any chance to load original SPL. To pola100. THX
Click to expand...
Click to collapse
Pleased refer this post. Install back hardspl and don't replug, wait until end session. flash back with original SPL.
Hi
I just bought a used Diamond 2 and wanted to update it to 6.5.
But when i try it stops for at 9% and then looses connection with the PC but recovers and continues to 18% then it stops and the RUU wants to recover the installation, that resulted in the same error.
Luckely I tried the offical 6.1 installation, and that installd OK so my phone is OK.
But why can´t I install 6.5?
I checked with the guy i bought it from, and he said it has been flashed before with a dutty or tom´s rom.
Can this be why it wont load?
I check the bootloader screen (thanks to Drag-On guide) and i says SPL-1.33. OliNex MicroP-Topaz (LED) v10
Do I need 1.83 to install offical 6.5?
I am using swedish rom since I am swedish.
Can anyone help me?
/ Bidde
Try hard spl 1.83, then try re-flashing your 6.5
If it still won't flash, try a different rom. Download a cooked rom, Tess 4.0 for instance, and see if you can flash it. If you can, there is probably an error with the original rom. Tess is close to stock anyway, but faster and better
He he!
It worked! Thanks alot!
So now when I have done that, I will try to install a rom.
/ Bidde
yeah try hard spl 1.83 1st and then u'll be able to flash wm 6.5.
that's the only wayt to do it, otherwise it'll remain stuck at 18% everytime u try to flash the new rom
i have same problem now.
Please, where did you find offical 6.1 installation?
Could you pm link please.
I found on the http://wiki.xda-developers.com/index.php?pagename=Topaz_ROMs_Shipped my previosly ROM and recovered phone
Uh
The 6.1 I just downloaded it from the www.htc.com site.
Under the support you will find youre phone
exactly likeme ,, try to remove memory card
Hi guys
I have managed to break my HD2. The touchscreen no longer works. I have a HD2 from Vodafone. I have decided to take it back, however I have flashed roms and radios before with HSPL. I managed to flash back to 1.48 and the radio with it, But once I tried to remove HSPL via microSD, When it boots I get the following screen.
Current Situation
I have bootloader up.
"SPL-1.42.0000"
Upgrade ROM code error Please try again.
I want to install a stock rom and radio so I can hand it back, but when I tried to install RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
I got Invalid Vender ID.
What should I do next?
UPDATE
Installed Vodafone rom from HTC site and seems to be booting fine,
Radio is now 2.07.51 and
Rom is the HTC 1.72 vodafone one.
Anything else I should do before I hand it back.
ZeonicZ said:
Hi guys
I have managed to break my HD2. The touchscreen no longer works. I have a HD2 from Vodafone. I have decided to take it back, however I have flashed roms and radios before with HSPL. I managed to flash back to 1.48 and the radio with it, But once I tried to remove HSPL via microSD, When it boots I get the following screen.
Current Situation
I have bootloader up.
"SPL-1.42.0000"
Upgrade ROM code error Please try again.
I want to install a stock rom and radio so I can hand it back, but when I tried to install RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
I got Invalid Vender ID.
What should I do next?
Click to expand...
Click to collapse
try to use task29
nothing else needed, being your phone a branded one its IMEI code can't be associated with unbranded stock roms, you flashing the official vodafone rom fixed it, so as long as there isn't ay hspl showing anymore you're fine for warranty servicing.
ephestione said:
nothing else needed, being your phone a branded one its IMEI code can't be associated with unbranded stock roms, you flashing the official vodafone rom fixed it, so as long as there isn't ay hspl showing anymore you're fine for warranty servicing.
Click to expand...
Click to collapse
Cheers mate, all systems are go. Will be handing it back today.
I'm sorry i know it's against the rules to be starting a new thread but it's been a week i've been asking for help and no one noticed. This is just a try to come noticed.
I installed task 29 on my blackstone. I had olinex 1.56 installed and later did the task29 with radio 1.13, 1.14 and 1.17 After successfully doing it i went on step 2 that is installing a clean rom. I tried these roms
blackSTONEhengeHyPerSlim_4_1
RUU_TOUCH_HD_MARYONE_23148_WWE_191110
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship(3)
They get installed but after i store the contacts and everything it gets stuck if kept for like half an hr. The screen doesn't respond but power button and the volume button works.
I took my phone to a repair center and they couldn't fix it. So please help me i've just got only one phone.
I don't mean to offend any moderators by this but i'm just asking for your help. Thank You
Try reinstalling stock ROM after Task 29.
Restore ONLY contacts, and then try using device for several days.
DO NOT install any other software!!!
If it works, then problem is in some data or software you're restoring.
If not, restore original SPL and original ROM and try again.
If it does not work... and service can not help you... then sorry...
Hello i did reinstall the stock rom after task 29 and i was using pimbackup for restoring but that freezed my phone so i installed the stock rom again and thought of not using it. Did that but nothing much helped.
I hope believe these are the correct shipped roms
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship(3)
Everything on xda has worked like wonders for me. Be it android on any other rom but right after task29 nothing seems to be working on my phone.
One thing i've noticed after installing any rom after task29 is if i get to the bootloader it gets me to a 1 sec white screen saying no image found. I hope what's causing a problem.
Do you understand WHAT Task 29 is?
It formats the partition drive of your device where the ROM resides. Meaning, it wipes any data regarding ROM.
So of course it would say "No image found".
I don't know which ROM is stock for your device. Try to update ROM via HTC site.
If lucky, it will suggest / let you find adequate ROM.
For my device it's 1.56.407.2 (German)!
If unlucky, it will say "Not supported" or something like that - then go for Orange 1.59.61.2 ROM.
And you might try one 1.5x ROM flash WITHOUT Task 29...
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Thanks will do it and keep yu updated with it..
simplistian said:
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Click to expand...
Click to collapse
Thanks i tried installing the stock rom like you told me but then got stuck on the screen alignment screen. I later installed blackSTONEhengeHyPerSlim_4_1 and now it's responding to every touch. Thanks alot. I hope this stays like this and yes instead of restoring i forwarded all the contacts through bluetooth. Owe you a BiiiiiiiiiiiiG thanks..
Too soon to be happy as same again..I don't think there should be a problem with touch as it works fine for first 1hr but right after something gets stored by something i mean contacts it stops reponding after sometime. The volume and power button work all fine. I can't make out the problem. Any ideas or suggestions. Shall i make a video and post ??
FIRST you have to make it work with factory settings - stock SPL and stock ROM.
After that flash what you like...
I think you have to follow Bodisson's suggestion, do everything as stock and retest without restoring anything. If it still failed...... you should have it repaired
Good luck!!
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Bodisson said:
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Click to expand...
Click to collapse
Glad to see somebody researching things out and settling on a radio he prefers due to performance rather than those just going for latest
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
kulwant said:
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
Click to expand...
Click to collapse
All rom's should work with each radio to be honest. Glad your device is working better, though still a little baffled why you're still having difficulties
EDIT - You are on a wm6.1 rom. Is the rom based on 1.56+, if not you may need to revert to HSPL 1.14
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
kulwant said:
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
Click to expand...
Click to collapse
I'm baffled but still want to get to the bottom of your issue and would appreciate any help from other members who may have idea's on how to solve your issue. From what I've read everything you have done is correct, but I don't like being stumped!!
If we start from the start, we may get to the bottom of this........
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
kulwant said:
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
Click to expand...
Click to collapse
Well as you know a T29 formats device so you need to flash a rom or you'll be stuck at boot screen. Before you do a T29 it states you must have HSPL on your device first. Now from what I've read you did have HSPL on first and your T29 worked as you where stuck at boot screen afterwards.
I'm assuming you turned device off, booted into bootloader then flashed youir rom (blackSTONEhengeHyPerSlim_4_1) which is based on 1.56+ as was your HSPL.
This all seems correct so I'm not sure what went wrong.
Is above all correct?
Did you try a T29 again and flash different rom or did you just flash different rom over existing?
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
kulwant said:
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
Click to expand...
Click to collapse
Right, I never put any files in same folder as it only confuses flashing process and can cause issues. I.e. put T29 in its own folder, radio 1.14 in its own folder and then rom in another folder.
Do a T29 and when its complete, I.e. stuck in smart mobility screen. Then you take out battery to turn phone off. After this put phone into bootloader and flash rom. Then flash radio after it as a lot of roms have a radio file included
...........................
Sent from the improved version of Tapatalk, better known as Forum Runner