Related
Hi!
I have been lurking around in this forum for quite some time, but I have been unable to find any information regarding how to disasamble the universal.
I have a broken screen, and I am thinking about buying a new lcd on ebay and try to replace the broken lcd.
I have tried to unscrew the six screws under the screen, but I am not able to open up and "get inside" to replace the lcd.
Are there any information aviable on how to do this, or even better an instruction on how to replace the lcd screen?
Thanks for any help and a great forum!
replacment screen
hi, i had the same issue where i accidently sat on my uni and cracked da screen. i ended up goin to a guy in slough who fixed ma screen for £120 (well £110 cos da screen has a really small scratch in the bottom corner on it - hardly visible)
It works perfectly and the screen looks new. im running all my normal apps on it, tomtom and i have no probs.
The guy advertises his screens on ebay and you can either send your uni to him or go to his house and get it done in front of you within 10 minutes. Definatly recommend this guy and he does all the XDA type screens and HP iPAQ's.
If anyone wants to contact this guy his number is 07919174796. He can sell you the screen on its own if you like.
HTC instructions
I have the pdf on how to dismantle and reassemble the HTC universal. Although I think it is in the FTP somewhere too.
BR
Wassa
itwasntme187 said:
hi, i had the same issue where i accidently sat on my uni and cracked da screen. i ended up goin to a guy in slough who fixed ma screen for £120 (well £110 cos da screen has a really small scratch in the bottom corner on it - hardly visible)
It works perfectly and the screen looks new. im running all my normal apps on it, tomtom and i have no probs.
The guy advertises his screens on ebay and you can either send your uni to him or go to his house and get it done in front of you within 10 minutes. Definatly recommend this guy and he does all the XDA type screens and HP iPAQ's.
If anyone wants to contact this guy his number is 07919174796. He can sell you the screen on its own if you like.
Click to expand...
Click to collapse
itwasntme187: Thanks, I was about to buy from this guy, but found another one at ebay that was a little bit cheaper ($160 for a new LCD screen). I sent an order today, so I hope I have done the right thing trying to fix it my self.
wassa: Thanks for notifying me that there was a manual out there. I checked the ftp and found the manual on dismantle and reassemble the HTC universal.
Thanks for the help to both of you.
you can download it here. http://buzzdev.net/component/option...om_remository&Itemid=100&func=fileinfo&id=304
The replacement was a success.
I got the LCD from ebay on Monday and using the above mentioned manual I was able to replace my broken LCD screen. It is an easy job if you follow the instructions in the manual. There is only a total of 8 screws that has to be unscrewed to get the job done. Now if I was only able to get a replacement camera flash light my universal would be in an almost perfect condition.
glad you got everything working!
Hi, im a newbie here. I also broke the LCD screen on my Universal/Xda Exec.
How can I access the FTP site to download the instructions on how to replace the screen?
Many thanks for your help.
you can get a new screen + have it replaced for 40 quid. Basically HTC has an agreement with the carphone warehouse and offer a repair service with all parts included for 40 pounds (I'm using a bloody german keyboard so i can't type the pound sign). When i broke my screen (I was bump starting a car with it in my pocket) i thought damn, now i'm 100 odd quid out of pocket, so i was suspiciously surprised when it was only 40 pounds. The only drawback is it takes about 6 weeks. Maybei should have posted this last year when i had my screen replaced...
LCD Replacement instruction sought
Hi. Hope the person who provided the instruction is still around. I am another Universal user who needs to replace the screen as the digitizer has not been working properly.
Anybody could provide the instructions on how to replace the LCD screen please? As far as I know the Universal's LCD screen and digitizer are attached and could not be separated without (de)soldering. But providing that the digitizer itself costs much less than the whole LCD ($8 vs. $135), if anyone would please provide the instructions on how to replace the digitizer (on the same lcd screen), that would really be awesome!
Really I do not enjoy the idea of sending the unit away for 2 weeks with £100 expense.
Thank you very much in advance!
Since there are obviously people here who have done this before could someone maybe help me out?
My screen is intact, but I dropped my Universal a while ago and since then the 2-axis screen hinge seems a bit loose. Everything works ok, it's just that the cover with the screen in it are not as firmly attached to the base as they used to be.
Can this be fixed by taking the device apart and reassembling it (tightening some screws and so on) or would it be a waste of time?
Hey,
My HTC Universal screen just cracked, surprisingly without any outside intervention. It was ok this morning and was sitting on my desk. When some friend called me and I picked it up the whole upper screen was cracked. Weird.
Anyway, it's time to replace because I really like this device. So I was looking on ebay and found some sellers who will send it for around 130$-140$ USD. I was wondering if there are some cheaper sellers available outside of ebay that I couldn't find.
Also, maybe someone has a broken Universal with a working screen. My device is missing the front plate (where the IR) and I could always use the extra parts.
Thanks!
- Yaniv
Hi all,
I just broke the screen of the hd
the lcd is ok also the touch screen on top is ok
what is broken is the layer of glass/plastic between the lcd and the touch screen....
any suggestion ?
what htc sell as spare parts?
Thanks in advance
If you have warranty try to apply it, if not use original HTC replacements, just google it
good luck,
I've see what you need on ebay, it cost 85 euros...
the part u broken is glass maden! 85€ it's a good price, if u send the device to htc in order to be repaired, 85€ it will be just a happy dream.
wich part exactly do i need ?
i was looking at the HTC_Blackstone_Service_Manual and i see in the Disassembling procedure that the screen come together with the front cover
but i am not sure.
thanks for helping
Hope you had some cover, we had a similiar thread like this a few weeks ago i got my HD insured soon after, for £6 a month with orange, cant afford to folk out £100+ pound if that happens to my HD. by the way how did that happen was much force needed?
i didn't notice,
i was surprise Very surprise
Spicefabry, did you find a good replacement?
Mine broke too two days ago
It start to ring and vibrate and felt from the table.
HTC service told me the glass come with display and they have to change both. For around 220Euros
And this is almost half of the price of a new HD
Well Guys the day has come where I have cracked my first phone. I was working and it fell a good 4ft onto a concrete floor face first. I have dropped my phone plenty of times but I guess this one finally did it. Thankfully it's not that bad as I just have a technicolor rainbow on the top of my screen. I can deal with it until I get a new screen. But just wanted to rant!
Damnnnnnnnnnn, sorrry to hear that bro!! Have you already ordered a new screen?
A couple of weeks ago I wanted to sell my Streak and took the pics, created the add( I know.. bad decision) but then it made a sudden unpredicted drop from around 50 cm (1.5 ft?) out of my pocket onto the tiles at home.
Nothing seemed to be wrong with it but after two hours or so the camera connection broke apparently as it wouldn't connect with the camera. Whenever I activated the camera app, the device would get very hot at the front and back cam region, the battery suddenly freaked out. If I made a phone call it would drop from 100 to 1% in less than a minute but if it was used as a mp3 player I could listen for at least a couple of hours. Charging went extremely fast, but discharging as well.
After a couple of days I sent it back to store as a RMA and just received the conformation today that it will be delivered tomorrow!
Anyways, my parents and friends laughed at me and said the Streak committed suiside ......The lesson I learned in my case: 1. Don't ever sell the Streak, 2. Don't drop it and you will be a happy man for a looooooong time.
That sucks man. I've been lucky enough to not have dropped mine yet.
However, I've received a line of faulty ones. Dell is shipping out my 5th replacement device!
I've given up on screen protectors. I keep having to ship them back to Dell. F it. I'll trust Gorilla Glass to be tough enough.
cyapalmpos said:
That sucks man. I've been lucky enough to not have dropped mine yet.
However, I've received a line of faulty ones. Dell is shipping out my 5th replacement device!
I've given up on screen protectors. I keep having to ship them back to Dell. F it. I'll trust Gorilla Glass to be tough enough.
Click to expand...
Click to collapse
gorilla glass aint that tough, mines is cracked just above the home button and runs along the edge of lcd for about an inch, new screen coming tomorrow so hopefully will get it changed ok (if i dont brea another part lol)
cyapalmpos said:
That sucks man. I've been lucky enough to not have dropped mine yet.
However, I've received a line of faulty ones. Dell is shipping out my 5th replacement device!
I've given up on screen protectors. I keep having to ship them back to Dell. F it. I'll trust Gorilla Glass to be tough enough.
Click to expand...
Click to collapse
just use those from Xtreme guards, they really great and you can reapply them! There are also a couple of alternatives, they use the same material but I find Xtreme guards to be the cheapest with great quality.
I've never used Guards on any of my phones. I will not ever unless I like the way it looks. Anyway. I am going to go ahead and order a new LCD and possibly try repairing it myself but I am very iffy about that.
been there. Actually got Dell to replace my Streak when it happened, but it took over a month! But I've been careful since.
I broke my Phone on the front about a month ago ... it was in my Jeans back pocket and I bent to pick up my kid from floor and went on to squat posture ... and heard a feeble cracking sound! I knew instantly, it happened. When removed, to my bad, it was found the same. Ran to the Dell Service next day morning (I am in Hyderabad, India now) and bought my Dell Streak when I was in US. I had to pay around 250$ (including $60 US to India warranty transfer) and they instantly replaced the device (except my old battery).
Hi everyone,
Phone dropped from very low height, front screen ok, e ink screen in 1000 little pieces...
I am in Netherlands, where could I order new screen repair set or have it fixed? Thoughts or suggestions anyone?
Thanks!
I'd try Yota support first. You'll probably have to send it in, and the price will likely be close to that of a second hand or even new YP.
Did you check if it is insured in any way? Maybe you used a creditcard with insurance to purchase it?
It definitely sucks to be you in this situation, but if your phone is actually open on one side now: maybe you can post some pictures of the internals?
No credit card unfortunately, online retailer to big to care, yotaphone only has support in Germany I think, I'll post shots of the back of the phone soon
I feel for you dude
The shattered back, should be easy to replace no?
Probably won't be easy/cheap if the gorilla glass is bonded to the EPD, then both will have to be replaced. Did you inquire with Yota support yet?
If the EPD screen is still kind of working, and you can't get the phone repaired, you can't sell it off, and it's constantly annoying you by taking up precious space on your desk, it could always have a second life as a development phone. </vulture mode>
SteadyQuad said:
Probably won't be easy/cheap if the gorilla glass is bonded to the EPD, then both will have to be replaced. Did you inquire with Yota support yet?
If the EPD screen is still kind of working, and you can't get the phone repaired, you can't sell it off, and it's constantly annoying you by taking up precious space on your desk, it could always have a second life as a development phone. </vulture mode>
Click to expand...
Click to collapse
I think it should be used as a development as well pass it on to steady quad
Sent from my YD201 using Tapatalk
adamo86 said:
I think it should be used as a development as well pass it on to steady quad
Sent from my YD201 using Tapatalk
Click to expand...
Click to collapse
Now I feel bad for even mentioning it. Broken or not, it's entirely upto jmreijnen what he wants to do with his device, most likely try to get it fixed first. My hint was: in the unlikely event that you're about to toss it away or let it collect dust till eternity, there could be another use for it.
Hopefully it can be fixed for a reasonable fee. I couldn't find an official list of Yota service centers, but Yota support should be able to provide it. If Germany has one, that might not be a bad option to send it to from The Netherlands.
Well, currently it is in its case, on a pile of other cases, but yes, will probably try via Yota, ink screen is working fine btw...
jmreijnen said:
Well, currently it is in its case, on a pile of other cases, but yes, will probably try via Yota, ink screen is working fine btw...
Click to expand...
Click to collapse
Good luck, keep us posted, would be good to know what Yota or Yota's partners charge for a repair like this.
BTW: I was pretty close to your situation this weekend: my phone slipped from my hand in a parking lot, was saved by Yota's bumper.
Careful! It was a very low drop that killed it for me. No word from Yota or the German repair partner, nothing.
I broke the AMOLED screen of my second yota 2 a week after it arrived.... On its first proper day out of the house. 70cm drop onto fine gravel car park. Completely shattered the screen. It continued working but after a few days the glass started crumbling apart.
I emailed both my supplier and yota support. Took a week to get a reply from supplier, a couple of days from yota. I told both that I wasn't happy with supposed gorilla glass covered screen shattering like that. My old s2 had survived various falls on a range of surfaces without ever breaking.
After a week of emails my supplier confirmed the screen would be replaced under warranty but I'd not be able to make other warranty claims on screen after replacement. It was the first screen my supplier had to replace. Took a fortnight. I had to pay transport and labour costs. Totalled about $250 Australian in March.
Response times were very slow but they did get it fixed for what I thought was a reasonable price. (Still about 30% of what I paid for it) Cheaper than another phone anyway.
My supplier was Hong Kong based drop shipper: Expansys.
Good luck.
On German Amazon there is a review of a guy who had the same problem. The service allegedly asked for around 400 Euros to fix the phone, which is harsh considering you can buy a used one on ebay for around 450 Euros and new ones with full warranty for about 520-550 Euros...
But I don´t know if it´s true! Contact
www.datrepair.de
[email protected]
+49 461-95775-0
and they should give you a fair quote on the issue.
You might want to check out the new Siswoo R9 phone with e-ink back screen as well, it retails for about 350-400 Euros on AliExpress, but I wouldn´t expect the same level of Software and Widget expertise the people from Yota put into their phone. One of the main reasons I still would´t switch to other companies is the professional software service of Yota. From what I saw, the cheaper models coming out now (like the Oukitel U6 for around 200 Euros) all use the same software options you can get with an InkCase - and their software simply s*cks. Almost no options apart from some basic notifications and the mirroring of some pictures or a book, that´s it. My Yota is the Prince of Sophistication, compared to that
In Switzerland repairing the phone should cost about 200 swiss francs (with an iPhone 4 as temporal replacement) - I'm now waiting for about 3 weeks, but since I didn't get any further notice I suppose (respectively I hope) it will for sure be below the upper limit of 250 swiss francs I specified.
jmreijnen said:
Hi everyone,
Phone dropped from very low height, front screen ok, e ink screen in 1000 little pieces...
I am in Netherlands, where could I order new screen repair set or have it fixed? Thoughts or suggestions anyone?
Thanks!
Click to expand...
Click to collapse
@jmreijnen
hi there, Did you replace the E-Ink screen? I broke my LCD and can't find any replacement, besides the official datrepair.de who want to charge 200€ for the repair. That's too much. I already opened it and it's quite easy to replace the E-Ink. Just be aware that there is a screw just right from the micro usb (LCD at the top). It's hidden behind a rubber part that you can remove with a thin screwdriver just by lifting the rubber at the side of the micro USB. If you don't remove that screw, the frame of the e-ink will bend.
Why am I writing this? Well, I would need a YP2 with an intact front screen to repair mine. Would you like to sell yours? If yes, drop me a PM.
---------- Post added at 09:23 PM ---------- Previous post was at 09:21 PM ----------
lumosimann said:
In Switzerland repairing the phone should cost about 200 swiss francs (with an iPhone 4 as temporal replacement) - I'm now waiting for about 3 weeks, but since I didn't get any further notice I suppose (respectively I hope) it will for sure be below the upper limit of 250 swiss francs I specified.
Click to expand...
Click to collapse
Hey @lumosimann, where in Switzerland did you get that quote?
@DeGon: So the 200 swiss francs were given by mobiletouch.ch as an estimate for repairing the front site. Finally I decided also to repair the little fracture on the back which finally cost 312 swiss francs, but now it looks as it'd be new.
repair took 7 weeks - but I was given a temporal replacement.
lumosimann said:
@DeGon: So the 200 swiss francs were given by mobiletouch.ch as an estimate for repairing the front site. Finally I decided also to repair the little fracture on the back which finally cost 312 swiss francs, but now it looks as it'd be new.
repair took 7 weeks - but I was given a temporal replacement.
Click to expand...
Click to collapse
Thanks for the tip! Will check with mobiletouch
The back of my HK supplied yotaphone is supposed to gorilla glass but feels like very thin plastic to me. The other AMOLED side (gorilla glass) seems to scratch very easily too. Both sides seem to be not very strong. Has anyone else thought this? Maybe fakes?
The EPD screen is very very thin and curved, it doesn't seem like Gorilla glass to me. I bet replacement costs big bucks.
Aliexpress sells front and back screens for YotaphonePremium Tempered Glass for Yotaphone 2 Screen Protector Glass For Yotaphone 2 Glass Protector 9H 0.33mm Front Protective Film
http://s.aliexpress.com/ZVbm2Ij6
(from AliExpress Android)
Parmo100 said:
The EPD screen is very very thin and curved, it doesn't seem like Gorilla glass to me. I bet replacement costs big bucks.
Aliexpress sells front and back screens for Yotaphone.
Click to expand...
Click to collapse
My second Yotaphone 2 in family. E-Ink screen already arrived in box broken on yp206 from Aliexpress. To me it looks like ordinary glass that is used on cheap chineese models such as Oukitel C3 etc. Gorilla glass cant be broken just by a little harsh transport (Box is in good shape). Not crushed. Whats more, due to the fact that this cheap off glass is curved on sides it probably has some serious inner tension. Looks like post manufacture model made in different factory. I know the phone is beautiful and all but but seriously watch out. I already filled a dispute but arrogant chineese seller want to blame me.