Hi everyone,
Phone dropped from very low height, front screen ok, e ink screen in 1000 little pieces...
I am in Netherlands, where could I order new screen repair set or have it fixed? Thoughts or suggestions anyone?
Thanks!
I'd try Yota support first. You'll probably have to send it in, and the price will likely be close to that of a second hand or even new YP.
Did you check if it is insured in any way? Maybe you used a creditcard with insurance to purchase it?
It definitely sucks to be you in this situation, but if your phone is actually open on one side now: maybe you can post some pictures of the internals?
No credit card unfortunately, online retailer to big to care, yotaphone only has support in Germany I think, I'll post shots of the back of the phone soon
I feel for you dude
The shattered back, should be easy to replace no?
Probably won't be easy/cheap if the gorilla glass is bonded to the EPD, then both will have to be replaced. Did you inquire with Yota support yet?
If the EPD screen is still kind of working, and you can't get the phone repaired, you can't sell it off, and it's constantly annoying you by taking up precious space on your desk, it could always have a second life as a development phone. </vulture mode>
SteadyQuad said:
Probably won't be easy/cheap if the gorilla glass is bonded to the EPD, then both will have to be replaced. Did you inquire with Yota support yet?
If the EPD screen is still kind of working, and you can't get the phone repaired, you can't sell it off, and it's constantly annoying you by taking up precious space on your desk, it could always have a second life as a development phone. </vulture mode>
Click to expand...
Click to collapse
I think it should be used as a development as well pass it on to steady quad
Sent from my YD201 using Tapatalk
adamo86 said:
I think it should be used as a development as well pass it on to steady quad
Sent from my YD201 using Tapatalk
Click to expand...
Click to collapse
Now I feel bad for even mentioning it. Broken or not, it's entirely upto jmreijnen what he wants to do with his device, most likely try to get it fixed first. My hint was: in the unlikely event that you're about to toss it away or let it collect dust till eternity, there could be another use for it.
Hopefully it can be fixed for a reasonable fee. I couldn't find an official list of Yota service centers, but Yota support should be able to provide it. If Germany has one, that might not be a bad option to send it to from The Netherlands.
Well, currently it is in its case, on a pile of other cases, but yes, will probably try via Yota, ink screen is working fine btw...
jmreijnen said:
Well, currently it is in its case, on a pile of other cases, but yes, will probably try via Yota, ink screen is working fine btw...
Click to expand...
Click to collapse
Good luck, keep us posted, would be good to know what Yota or Yota's partners charge for a repair like this.
BTW: I was pretty close to your situation this weekend: my phone slipped from my hand in a parking lot, was saved by Yota's bumper.
Careful! It was a very low drop that killed it for me. No word from Yota or the German repair partner, nothing.
I broke the AMOLED screen of my second yota 2 a week after it arrived.... On its first proper day out of the house. 70cm drop onto fine gravel car park. Completely shattered the screen. It continued working but after a few days the glass started crumbling apart.
I emailed both my supplier and yota support. Took a week to get a reply from supplier, a couple of days from yota. I told both that I wasn't happy with supposed gorilla glass covered screen shattering like that. My old s2 had survived various falls on a range of surfaces without ever breaking.
After a week of emails my supplier confirmed the screen would be replaced under warranty but I'd not be able to make other warranty claims on screen after replacement. It was the first screen my supplier had to replace. Took a fortnight. I had to pay transport and labour costs. Totalled about $250 Australian in March.
Response times were very slow but they did get it fixed for what I thought was a reasonable price. (Still about 30% of what I paid for it) Cheaper than another phone anyway.
My supplier was Hong Kong based drop shipper: Expansys.
Good luck.
On German Amazon there is a review of a guy who had the same problem. The service allegedly asked for around 400 Euros to fix the phone, which is harsh considering you can buy a used one on ebay for around 450 Euros and new ones with full warranty for about 520-550 Euros...
But I don´t know if it´s true! Contact
www.datrepair.de
[email protected]
+49 461-95775-0
and they should give you a fair quote on the issue.
You might want to check out the new Siswoo R9 phone with e-ink back screen as well, it retails for about 350-400 Euros on AliExpress, but I wouldn´t expect the same level of Software and Widget expertise the people from Yota put into their phone. One of the main reasons I still would´t switch to other companies is the professional software service of Yota. From what I saw, the cheaper models coming out now (like the Oukitel U6 for around 200 Euros) all use the same software options you can get with an InkCase - and their software simply s*cks. Almost no options apart from some basic notifications and the mirroring of some pictures or a book, that´s it. My Yota is the Prince of Sophistication, compared to that
In Switzerland repairing the phone should cost about 200 swiss francs (with an iPhone 4 as temporal replacement) - I'm now waiting for about 3 weeks, but since I didn't get any further notice I suppose (respectively I hope) it will for sure be below the upper limit of 250 swiss francs I specified.
jmreijnen said:
Hi everyone,
Phone dropped from very low height, front screen ok, e ink screen in 1000 little pieces...
I am in Netherlands, where could I order new screen repair set or have it fixed? Thoughts or suggestions anyone?
Thanks!
Click to expand...
Click to collapse
@jmreijnen
hi there, Did you replace the E-Ink screen? I broke my LCD and can't find any replacement, besides the official datrepair.de who want to charge 200€ for the repair. That's too much. I already opened it and it's quite easy to replace the E-Ink. Just be aware that there is a screw just right from the micro usb (LCD at the top). It's hidden behind a rubber part that you can remove with a thin screwdriver just by lifting the rubber at the side of the micro USB. If you don't remove that screw, the frame of the e-ink will bend.
Why am I writing this? Well, I would need a YP2 with an intact front screen to repair mine. Would you like to sell yours? If yes, drop me a PM.
---------- Post added at 09:23 PM ---------- Previous post was at 09:21 PM ----------
lumosimann said:
In Switzerland repairing the phone should cost about 200 swiss francs (with an iPhone 4 as temporal replacement) - I'm now waiting for about 3 weeks, but since I didn't get any further notice I suppose (respectively I hope) it will for sure be below the upper limit of 250 swiss francs I specified.
Click to expand...
Click to collapse
Hey @lumosimann, where in Switzerland did you get that quote?
@DeGon: So the 200 swiss francs were given by mobiletouch.ch as an estimate for repairing the front site. Finally I decided also to repair the little fracture on the back which finally cost 312 swiss francs, but now it looks as it'd be new.
repair took 7 weeks - but I was given a temporal replacement.
lumosimann said:
@DeGon: So the 200 swiss francs were given by mobiletouch.ch as an estimate for repairing the front site. Finally I decided also to repair the little fracture on the back which finally cost 312 swiss francs, but now it looks as it'd be new.
repair took 7 weeks - but I was given a temporal replacement.
Click to expand...
Click to collapse
Thanks for the tip! Will check with mobiletouch
The back of my HK supplied yotaphone is supposed to gorilla glass but feels like very thin plastic to me. The other AMOLED side (gorilla glass) seems to scratch very easily too. Both sides seem to be not very strong. Has anyone else thought this? Maybe fakes?
The EPD screen is very very thin and curved, it doesn't seem like Gorilla glass to me. I bet replacement costs big bucks.
Aliexpress sells front and back screens for YotaphonePremium Tempered Glass for Yotaphone 2 Screen Protector Glass For Yotaphone 2 Glass Protector 9H 0.33mm Front Protective Film
http://s.aliexpress.com/ZVbm2Ij6
(from AliExpress Android)
Parmo100 said:
The EPD screen is very very thin and curved, it doesn't seem like Gorilla glass to me. I bet replacement costs big bucks.
Aliexpress sells front and back screens for Yotaphone.
Click to expand...
Click to collapse
My second Yotaphone 2 in family. E-Ink screen already arrived in box broken on yp206 from Aliexpress. To me it looks like ordinary glass that is used on cheap chineese models such as Oukitel C3 etc. Gorilla glass cant be broken just by a little harsh transport (Box is in good shape). Not crushed. Whats more, due to the fact that this cheap off glass is curved on sides it probably has some serious inner tension. Looks like post manufacture model made in different factory. I know the phone is beautiful and all but but seriously watch out. I already filled a dispute but arrogant chineese seller want to blame me.
Related
Well I dropped my G1 the other day and it busted the outer glass part. The LCD is fine and it still works perfect. I have looked everywhere,with no luck of finding any parts for them. So I called HTC and they told me 150-250 to replace the glass!! So I was wondering if any one know anyone that does G1 Repair or if anyone know of another phone that has more ava. parts for it with a 3.17" Screen? Any help is greatly appreciated.
Nope, I got AT&T. Was thinking of taking apart the phone and getting the glass measurements and having a custom cut piece of glass.
i believe its a special type of glass
Pretty much stuck buying the glass from HTC on this one ...sorry
PS... it is glass
iphone 3g - Dream lcd
I read that the same screen is in use on the iphone 3g, I doubt its true they probably meant type or sumthin, maybe worth a check...
on the old palm pdas you could replace just the glass if the layer under it isn't damaged, this may no longer be possible with these screens, once the bigtime flashing begins there will be lots of bricks available pretty cheap, maybe you should keep an eye out for somebody who pooched the dev bootloader install then after you convince them they killed it you could buy it maybe for less than the HTC price...
gotta say, that sucks if you were a tmob customer you'd have a few options...
bhang
Hello. Don't you think It's weird that it happened to me too today?
I've never had a broke phone since my Nokia 8210.
Well, some idiot had placed out one of those kinds of plastic bands you use to seal packages with, a black one.
It was pitch dark and I fell as the plastic ring got snared around my feet. Obviously my Jabra bt3030 got pushed against the screen and it got severely cracked.
My insurance company seems to be covering the whole phone except a small sum. This was from the phone part, but I got to see if I can get something from the health insurance as I hit my head and scratched my hand (though not likely but I can always try)
The touch seems to work most of the time, though it reacts slowly but some times It's just dead.
This really sucks.
I'm dead serious when I'm talking that there was no way that the band could be seen when walking.
http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226&view=unread
Some info there.
aad4321 said:
yeah i dont think it is really even "glass" mabye its a type of plexiglass?
Click to expand...
Click to collapse
It is glass. But you can not simply cut a piece of glass to the same dimension as the touchscreen is integrated into the glass cover. So yes you will need to get a htc or aftermarket replacement part.
The interesting thing is that the repair cost you quoted is identical to the cost of the copay if you go with the Asurion device insurance T-mo offers. So device insurance would just be a waste of money at $5 a month if you end up with broken glass.
Looks like I will just have to hold onto it until aftermarket parts come out. I busted mine by letting it slip out of my hand while talking on it....then it took a 6ft fall to eventually land face first on concrete.....I didnt even wanna pick it up cause i new it was messed up and if it wasnt I was gonna call HTC and give them props! I have a ava. upgrade from AT&T Maybe get a Iphone until this one gets fixed then sale iphone on ebay for 5x wuts its worth.
The iphone's screen seems to crack pretty nice as well.
I hope changing the glass on the G1 isn't as frustrating as on the Iphone.
http://www.youtube.com/watch?v=sT7wRXeYsyg
edit:
Not directing this to the message above, just saying.
Cracked screen replacement with compatible HW from third party --when?
I cracked the LCD of my G1 after about three weeks and have noted that neither PPCTechs nor MobileKangaroo have yet acquired a source for the replacement screen.
My understanding is that HTC currently charges what one thread in another forum (http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226) quoted as "a minimum of $238.00" to make this repair.
I expect this repair to be offered soon by third parties for about $150, likely using a non-HTC screen product to replace the damaged one.
Has anyone heard any reports about forthcoming availability of such hardware? If so, then are there any non-HTC services to make the replacement?
yeah im looking for this too...i dropped mine and then proceeded to step on it day two with the phone.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
WooHoo 2 items left as of this copy paste. $80, not bad price.
Shaggy
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
This waht i found out
so have the same issue and this is what I found out
so from my understanding there are 2 part to the lcd the outer glass touch sensor and the inner lcd. if the the screen is just cracked and you can see the image the u have to replace both. attached are the part descriptions fromt he g1 service manual. and below is a link of a site that sells them, but for some reason they sell the touch scrren with the outer bezel making it cost more. i called htc to order just the touch sensor glass but they said the dont sell replacements, they just fix em
link
Shagman68 said:
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
Click to expand...
Click to collapse
I contacted the seller of the screen and he/she told me that It's only the screen. If the G1 cracks It's the digitizer glass that cracks first. Then if you are unlucky the screen cracks as well. I managed to only crack the digitizer glass. The screen beneath is totally fine. Unfortunately removing the glass from the digitizer plastic was very painful and I managed to wreck the flat cable of the digitizer so that's beyond repair. Now I tried to disassemble the whole phone but I got stuck at removing the housing. First I had problems with the Torx bits. I have some Torx bits in my sets but the lowest I got was T8. I had to buy a cellphone bits set with a lot of different types of bits. It had Torx all the way down to T4. The T5 and T6 was what I needed. There are 4 T5 to remove and one T6. I have inserted the sharp plastic between the housing and the top case and released all hooks but it seems the front and back part of the housing of the phone is dead stuck.
You have to open the whole damn phone from the back to get to the inside of the screen. Why the screen housing uses standard Philips is also beyond me. I have lots of bad experience with standard Philips screws. The heads always get bad after a while of screwing. I have yet to have a problem with Torx.
I just got my DVP a few days ago...
Today I dropped it (the first time it dropped) and it shattered the glass...
everything works fine still...it is just so ugly I would like to get it fixed...
What can I do?
I cannot find any replacement parts, I cannot find any repair shops for this phone also... currently I am on hold trying to call dell (hopefully they give me good news?)....
I am lost and disappointed -I cant believe I cracked it esp. this soon!..
well I am asking for your advice / comments / help on this one, XDA ...
please advise me...
UPDATE: dell said it would be 249.99 to get a replacement phone...
good deal? or should I just get another phone or something? I am thinking of going through with it to get it done, but if there are cheaper options I am interested...
Did you try checking with @dellcares on Twitter? Someone had a similar issue the other day and said @dellcares helped them. Not sure exactly what the outcome was, but worth a shot.
pjfan75 said:
Did you try checking with @dellcares on Twitter? Someone had a similar issue the other day and said @dellcares helped them. Not sure exactly what the outcome was, but worth a shot.
Click to expand...
Click to collapse
no, but dell charged me 249.99 to send me a replacement device...
they told me that a cracked screen is considered to be out of warranty (I think it also includes any physical damage as well...not sure about that part though)...
erebusting said:
no, but dell charged me 249.99 to send me a replacement device...
they told me that a cracked screen is considered to be out of warranty (I think it also includes any physical damage as well...not sure about that part though)...
Click to expand...
Click to collapse
you're lucky then. They sent me a copy of the posting on their community forums telling me its absolutely not covered. I could replace my 16g device...for $499.00. But they would throw in free over night shipping.
While it sucks, I think it's hard to argue with this stance unless people start to report widespread screen cracks. I've dropped mine a couple of times and no problems (~knock on wood~) and I have not read about a rampant issue with screen fragility, so at the moment it sounds like you were just damned unlucky.
My phone just fell at the train station and the freaking screen cracked. Damn. I called T-Mobile . .The rep at first didn't even know what it was and asked if it was a tablet. Put me on hold for over 10 mins then asked me to call Asurion and see what they said.
Asurion rep put me on hold for about 5 mins and then said it wasn't a supported phone.
I then called Dell Mobility. Lady told me $249 for a replacement. wow! I told her I'd think about it. Though it's half the cost I could get an HD7 straight from T-Mobile for less than $100 with contract renewal
alabij said:
My phone just fell at the train station and the freaking screen cracked. Damn. I called T-Mobile . .The rep at first didn't even know what it was and asked if it was a tablet. Put me on hold for over 10 mins then asked me to call Asurion and see what they said.
Asurion rep put me on hold for about 5 mins and then said it wasn't a supported phone.
I then called Dell Mobility. Lady told me $249 for a replacement. wow! I told her I'd think about it. Though it's half the cost I could get an HD7 straight from T-Mobile for less than $100 with contract renewal
Click to expand...
Click to collapse
That is exactly why I have mine insured by Squaretrade...
erebusting said:
I just got my DVP a few days ago...
Today I dropped it (the first time it dropped) and it shattered the glass...
everything works fine still...it is just so ugly I would like to get it fixed...
What can I do?
I cannot find any replacement parts, I cannot find any repair shops for this phone also... currently I am on hold trying to call dell (hopefully they give me good news?)....
I am lost and disappointed -I cant believe I cracked it esp. this soon!..
well I am asking for your advice / comments / help on this one, XDA ...
please advise me...
UPDATE: dell said it would be 249.99 to get a replacement phone...
good deal? or should I just get another phone or something? I am thinking of going through with it to get it done, but if there are cheaper options I am interested...
Click to expand...
Click to collapse
Replacement glass from here:
mobilephonecrazy.com/modeldetail/Venue-Pro,LCD_Glass_Lens_Screen_.htm
I haven't ordered it yet. Looks like the glass pops out easy.
philippis said:
Replacement glass from here:
mobilephonecrazy.com/modeldetail/Venue-Pro,LCD_Glass_Lens_Screen_.htm
I haven't ordered it yet. Looks like the glass pops out easy.
Click to expand...
Click to collapse
Hi, so i had a similar situation this past week and I wanted to find out if you were able to purchase and replace the screen? Got the same $249.99 replacement quote from dell (even though you can purchase a new one for $300 from dell).
Please help!
Gorilla glass is supposed to be strong?
Guys, shed some light, as I anticipate gorilla glass to be shatter proof to most extent! I am amazed seeing this thread!
nauman said:
Guys, shed some light, as I anticipate gorilla glass to be shatter proof to most extent! I am amazed seeing this thread!
Click to expand...
Click to collapse
Scratch Resistant NOT shatter proof. Accept this now before something happens and you wind up butthurt.
you guys should get a warranty from squaretrade. they cover shattered screens and liquid immersion and are pretty cheap compared to an extended warranty from dell.
Dell Venue Pro replacement glass / fix
babaaketi said:
Hi, so i had a similar situation this past week and I wanted to find out if you were able to purchase and replace the screen? Got the same $249.99 replacement quote from dell (even though you can purchase a new one for $300 from dell).
Please help!
Click to expand...
Click to collapse
I had a similar situation - wife dropped and our small son stepped on her Venue Pro, cracking the upper right corner of the gorilla glass. The phone still worked fine, even in the impacted area -- it just looked ugly and glass continue to chip off. Dell offered to replace it for $250.
I found the replacement glass from the below site, ordered it and it took about 2 months to arrive (they were out of stock initially).
mobilephonecrazy.com/modeldetail/Venue-Pro,LCD_Glass_Lens_Screen_.htm
I successfully swapped out the glass today and it was tedious being careful not to break anything and lose parts, but not too bad if you're patient - it took me about an hour. Remove the backing and battery and there are 6 black screws to remove (one was covered by a white sticker for me). I just used my finger nail to go around the edge of the lower housing (not LCD) until I was able to wiggle and eventually pop it free (be gentle, don't force it). Then extend the slider so the keyboard is exposed. Rotate 90 degrees from the lower housing you separated from, being careful not to damage the cables that attach the LCD to the lower housing. There are then 4 screws that secure the digitizer / glass to the LCD and slider housing. Two you can see internally once you rotate 90 degrees as above. The other two are always visible with the slider extended (keyboard visible) but they're under 2 black stickers at the top of the screen on the back. I just used a push pin under the edges to pop off the stickers. After removing these 4 screws, again I used my finger nail working my way around to pop off and remove the digitizer / glass from the LCD and slider housing. Once free, there is a single cable connection to remove the digitizer / glass from the LCD. Check the replacement glass as a guide for where these last 4 screws are and where the cable connects (top of the screen near the speaker). The cable just pops on / off.
Ensure you clean the underside of your new screen and the LCD is free of dust / debris / fingerprints before reassembling! Snap on the glass to the LCD / slider housing and install those 4 screws first, then rotate back 90 degrees to pop on the lower housing and then finally re-install those 6 screws. Mine fired right back up and works fine...I was a little nervous with potential damage to the exposed cables and separating the housings, but it turned out fine.
nauman said:
Guys, shed some light, as I anticipate gorilla glass to be shatter proof to most extent! I am amazed seeing this thread!
Click to expand...
Click to collapse
I just replaced mine last night. A bit heart stopping at times as there are a lot of fragile cables and little thingst that can fall out but if you have a good light, a small star-shaped screwdriver, and patience, you can do it. I bought the glass from an EBAY seller in china. Took less than 14 days to arrive and the cost was a lot cheaper than the UK seller you see in the posting (I paid like $74, with shipping). My DVP looks new now. I tooks some pictures as I was taking the thing appart and will try and post later.
I was able to create a very raw an amateourish video for youtube. Hopefully you can use this link to get to it //youtu.be/pnOnYZDZfrw I hope this helps somebody out there that needs to replace the glass on their DVP!
philippis said:
Replacement glass from here:
mobilephonecrazy.com/modeldetail/Venue-Pro,LCD_Glass_Lens_Screen_.htm
I haven't ordered it yet. Looks like the glass pops out easy.
Click to expand...
Click to collapse
Thanks for the advice, I'll check it out.
I've managed to get some serious scratches on my Gorilla Glass and I've no idea how I've done it as I am always incredibly careful with my phone.
How do you know it pops out easily? Did you see it somewhere? I'd like to see how easy it is to remove and replace before attempting it myself.
Thanks in anticipation,
Best wishes,
DaFfY
---------- Post added at 11:42 AM ---------- Previous post was at 11:38 AM ----------
Ooops! Just seen the video!
Thanks guys,
Appreciate the help.
Best wishes,
DaFfY
now what....
I shattered the front glass on my DVP and bought a replacement on Ebay from a seller in Hong Kong. I watched a youtube video and managed to take the phone apart and replace the screen successfully. If you do this, be warned that there a few pieces that are not attached to the motherboard that will just fall out. Be sure to notice where they came from. For me, a little board running the on/off button and the camera lens fell out. It was easy to put them back in their place. HOWEVER........
Everything works now except I see the letters "ENU" up near the clock, and the virtual keyboard will not appear. Do you think this means the phone thinks the keyboard slider is out because of something I screwed with while the phone was apart?
I just installed the Mango 8107.79 update, and the keyboard still will not appear. So I know its not a bug. The EM app (you get after pressing qwertyuiop and doing the "man machine interface test") is telling me the slider is open when its not.
What does ENU mean? Just be careful if you replace your own screen!!
nylonthread said:
What does ENU mean? Just be careful if you replace your own screen!!
Click to expand...
Click to collapse
ENU means that the next letter you type is going to be upper case.
nylonthread said:
Everything works now except I see the letters "ENU" up near the clock, and the virtual keyboard will not appear. Do you think this means the phone thinks the keyboard slider is out because of something I screwed with while the phone was apart?
Click to expand...
Click to collapse
Yes, I think you are probably correct.
Mine says 'ENG', so I would guess it represents the language. 'ENU' is probably English - United States. The code seems to appear when the physical keyboard is pulled out. (It doesn't seem to be visible when using just the on-screen keyboard).
thanks....
Thanks, that's what I needed to know. I guess I'll take it apart again and see if I can figure out why the keyboard is stuck in pulled-out-mode. I feel guilty now, because I just bought a Lumia 710 to replace my DVP, but the display is nowhere as beautiful. The Dell really is a great product....
Hi wise people of XDA (I really mean it.)
A few days back I dropped my precious phone while riding my scooter 70 km/h.
Now I agree that we own a REAL SOLID DEVICE. But unfortunetely my SGS3 couldn't stand much against this drop and I cracked my screen glass. Any way, I contacted my local authorized service here in Turkey and they told me the price would be around 275 euros since the glass is not changeable by itself and comes along with the amoled display and the touch unit. So doesn't sound reasonable to me. I attached photos as well in the messages so can anyone help me about the problem. I found single glass through shopping sites but afraid to change it myself and I don't know if it will work??
http://dl.dropbox.com/u/70521983/IMG_0268.JPG
http://dl.dropbox.com/u/70521983/IMG_0267.JPG
From what I have seen it looks hard to just replace the glass
Samsung dont make just the glass. The display, digitizer and glass are all made as one contained unit.
Sent from my GT-I9300 using xda premium
That is bad, man :/ I'm sorry for ya. But the price is sh*t , for real. It's just too expensive. Just take a look on ebay. There are some offers with prices about 180 euros, what is a real price drop compared to your offer.
And actually it isnt that difficult to change the display. I did it on my galaxy s1, was really hard. But on the s3 it wont be that difficult, cause the unit that is sold is almost complete, touch sensors, hardplate and display with digitizer are complete, so you only have to move your mainboard ( ) and the other small parts, and you're done with it.
http://www.ebay.de/itm/Samsung-Gala...88167071?pt=Handy_Zubehör&hash=item3379e1b49f
http://www.ebay.de/itm/Samsung-i930...zer_Ersatzteile_Werkzeuge&hash=item5ae79c0a7e
actually its german, but they maybe ship it to you anyway, its cheaper then let this one change by local "professionals"
greets from germany good luck ,mate
thanks for all your precious replies. I'll try to solve this through German ebay since the prices are reasonable
I was expecting much worse seeing it fell from a moving scooter. You lucked out man.
efato said:
Hi wise people of XDA (I really mean it.)
A few days back I dropped my precious phone while riding my scooter 70 km/h.
Now I agree that we own a REAL SOLID DEVICE. But unfortunetely my SGS3 couldn't stand much against this drop and I cracked my screen glass. Any way, I contacted my local authorized service here in Turkey and they told me the price would be around 275 euros since the glass is not changeable by itself and comes along with the amoled display and the touch unit. So doesn't sound reasonable to me. I attached photos as well in the messages so can anyone help me about the problem. I found single glass through shopping sites but afraid to change it myself and I don't know if it will work??
http://dl.dropbox.com/u/70521983/IMG_0268.JPG
http://dl.dropbox.com/u/70521983/IMG_0267.JPG
Click to expand...
Click to collapse
that was a bad drop mate seeing from the pictures. sometimes rubber cases could help :good:
but anyway wish you all the luck on the screen replacement :angel:
Hi,
First i am sorry if there is already a topic like this one but i was unable to find it. Feel free to just point at it and be approprately mean with me.
My N4 fell on the back and the touchscreen does not respond correctly anymore (a 2cm high band in the middle is unresponsive, jsut where i should validate my pin code). I would like to know if you know fair prices, high quality screen replacements. The original part from LG is 120 EUR according to my local retailer, but i see replacements on amazon and ebay around 50 eur. I know i could replace the touchscreen only but it seems very risky, so i'd prefer to replace the whole screen instead.
Thanks !
jdefaver said:
Hi,
First i am sorry if there is already a topic like this one but i was unable to find it. Feel free to just point at it and be approprately mean with me.
My N4 fell on the back and the touchscreen does not respond correctly anymore (a 2cm high band in the middle is unresponsive, jsut where i should validate my pin code). I would like to know if you know fair prices, high quality screen replacements. The original part from LG is 120 EUR according to my local retailer, but i see replacements on amazon and ebay around 50 eur. I know i could replace the touchscreen only but it seems very risky, so i'd prefer to replace the whole screen instead.
Thanks !
Click to expand...
Click to collapse
The two ebay screens I've ordered were both blems with air bubbles trapped in the film. They worked though. I've got pictures of them somewhere.
So I just bought and installed this one a week ago:
etradesupply dot com/oem-lg-nexus-4-e960-lcd-screen-and-digitizer-assembly-with-front-housing.html
And it was worth every penny. My digitizer had cracked in the bottom corner, but was fully functional. What I didn't realize was how scratched up the glass was and how much the oleophobic coating had worn off. The new screen, digitizer, and frame from etradesupply was perfect. No bubbles, the glass was curved on the sides, and it is just as responsive as the stock screen. I was really worried about it not being up to OEM standard. The installation was very easy. I have read some replacements not having a filter over the LED and light bleeds out, but this one has the filter. 5 stars, would buy again. I did alot of research before hand, and have heard many horror stories of Ebay replacements, but this one really worked out well.
Hello all,
I bought a Galaxy S4 for my partner, and stupidly didn't get it insured.
The screen got cracked quite badly, so fr £120 a local lad put a new screen on. Later that week it got dropped onto mud on the way to nursery and smashed entirely.
I now have a predicament, either give up the phone and go back to my sluggish s3, or ask you guys this question:
Where is the best and most value for money place to get a smashed screen fixed (you can't see anything just a rim of light) somewhere reputable that will use genuine parts and guarantee their work? I really don't want to just leave it on the shelf and am worried that without good advice I will end up with another shabby repair.
Your input would be greatly appreciated.
Many thanks and Happy Christmas,
Ric
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
knuckles1978 said:
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
Click to expand...
Click to collapse
ha, the first time the phone broke, my misses threw it against a metal door obliterating the top and matrix thingy so an extensive repair was required. I'm well aware of the £5 DIY jobby hairdryer thing but this second breaking is again both screens, and I don't want a shabby repair I want the original screen part so that it is as strong as it can possibly be. I paid this guy £120, but the screen was so weak it broke dropping on mud! SO I still need to know, where can I get it fixed with genuine Samsung parts? Samsung only? Are the any reputable companies members would use to have their £500 phones repaired?
Thanks to the guy that replied I can't see your name now I'm replying somehow...
In pretty sure there aren't any fake AMOLED screens, not like phones that use LCD - there are hundreds of fake LCD's for those phones. But there are fake front glass panels.
If I wanted to make sure that genuine parts were used I'd order the screen assembly up from eBay myself. You can order it up as a complete front assembly from eBay, and it's a very easy job to change the whole thing over yourself, if you're reasonably confident about tackling things like that. Just make sure it's described as 'Genuine Samsung', and not 'Samsung panel genuine for i9505' or suchlike. If it's described as 'Genuine Samsung', then you have comeback of its not.
I've fixed a good few phones though, and all the times I've ordered parts as I've described above, it has been the real deal. It's pretty easy to tell the fake front glass panels.
Changing the front glass only with hairdryer etc is a sh!tty job, but changing a whole front panel which has the chrome effect plastic trim piece, AMOLED, touch sensor, and front glass already assembled is a piece of p!ss...
I would totally recommend just getting it fixed... plenty of tutorials online to follow. Watch a few of them and see if it is something you are comfortable doing yourself. I've done it and found it to be quite simple. But, it all depends on your comfort level with repairing things...
I think getting it fixed is the idea, yes lol
I was saying though that since it's the whole thing that is broken and needs changed, and not just the front glass, the job is much easier. It's just a case of taking a few screws out and swapping the whole front assembly. On a difficulty rating out of 10 I give it a 4
If you watch a couple of videos on YouTube first, and you take it nice and carefully, I'd say this is a job that most people could handle.