Related
i have a tmobile Wing running wm6 and i have tried all htc touch apps on this website and they dont work for me... can someone either upload working apps(like the contact manager, the comm. manager, the cube thing) or upload a working ROM of the HTC touch(which will work on the WING) for the 64 bit computer??
how are you installing them?
you realise you put the cab file onto the phone then execute it there rather than your pc right?
thats the impression i get from your post...
yes i know that, i am not a nub... i have installed many apps, but they end up screwing up my phone cause it works so slowly
bump ...
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
well, i transfer it to my storage card, and then run it. later i get a successfully installed message. i soft-reset my phone and then either the program doesn't start up, puts my phhone in a infinate reset mode, or doesnt work correctly.
the htc cube is installed, but i can see the cube! i see this S icon, and a P icon when i slide my finger from bottom to up . since it didnt work, i unistalled it.
the contact manager from the all htc apps extracted sticky starts up, but i cannot change the theme! i see the regular old contacts manager with a white bar, when i run my finger over it, it shows a letter, and scrolls to it, but doesnt have the touch interface i need, and its not graphical at all
and the comm. manager REMOVES my comm. manager, rather than adding one
i am running wm6, boots fine now, the following htc apps
-audio manager
-htc touch theme
-htc album
-htc touch skin for wmp
-spb backup
-htc touch wait cursor(got from freewarepocketpc.net)
that should explain a lot
mr_ding said:
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
Click to expand...
Click to collapse
explode? can you please post some links and i will try them and replay asap
The 'htc cube' your talkin about is not the actual cube. its called FTouchFlo and is used to scroll and launch programs by using gestures. the changing between s and p is changing between launching mode and scrolling mode. What your looking for is the TouchFlo cube, which i belive must be cooked into a rom to work well. there are other options out there that can be cab installed, just search around the forums.
u mean something like this?
http://forum.xda-developers.com/showthread.php?t=343583
i tried that but in the instructions, i dont know what the prequisites are n i dont have em
i copied the shortcuts to the startup folder and then i ran the program in the folder containting the exe file that came with the zip
can someone post a cab, that i run, and will configure my phone that it works... i dont want to do the "remove the following apps from the startup folder...", the cab file should do that...
i also have problem with touchflo. i saw a lot of threads on it and i dun know which 1 i have to follow and install.
and if any expert here can help me.
1. i am on wm6. not htc theme.
2. i am on wisbar and wisbar desktop
3. device is atom life.
and i want to use the touchflo. can anyone assist me?
can i do the swiping even my screen is on the wisbar?
can anyone help me with this.
help is greatly appreciated.
thanks!
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
killeredge said:
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
Click to expand...
Click to collapse
yes. i want also.
bump? ...
bump ??
come on ppl, i am sure that someone has gotten touchflo to work
Hi guys i found this on ppcgeeks.com
http://forum.ppcgeeks.com/showthread.php?t=28385
Can anyone rewrite the cab - I mean i´m german and i´m useing a german rom and the the cab install will install everything on storage card - but in german system its called Speicherkarte.. Can anyone help
I tried this last night, and had nothing but problems, had no responce from the screen, it worked once, and i will admit that it looked very nice.
it just stopped responding, i couldnt even get into the settings or file explorer to remove the WAD or WA from startup folder.
in the end i had to hold the windows and ok hard keys on my touch cruise to reset the damn thing.
I would suggest you back everything up if you try these cab's.
good luck, i hope you all have more luck than me.
WAD2 is still in RC form...there are still bugs that are being worked out till a final release.
joey jojo said:
I tried this last night, and had nothing but problems, had no responce from the screen, it worked once, and i will admit that it looked very nice.
it just stopped responding, i couldnt even get into the settings or file explorer to remove the WAD or WA from startup folder.
in the end i had to hold the windows and ok hard keys on my touch cruise to reset the damn thing.
I would suggest you back everything up if you try these cab's.
good luck, i hope you all have more luck than me.
Click to expand...
Click to collapse
That sounds bad...
I hope someone makes it multilangual....
I tried it on my Orbit 2 ..Works really well and responsive...like the animated gesture transitions...(imho its the fastest diamond theme available)
I just installed the deskop not the taskbar thing(don't like it)
Very configurable....still playing with it...
This is a good UI, and very good theme. I have very much enjoyed converting this them to work on the 320x 320 platform. I think you will see many more using the WAD2 in the near future as it is very flexible and quite responsive and not a memory hog.
Jdume I posted a message on the WAD forum you can respond there or here whichever is more convenient.
i used to use WAD for getting the vista theme on my device, really need to get into it again, cos i think probably did something wrong.
i might try again in a few weeks when i have some more spare time, does the diamond theme have any cool transitions? i mean close to the original thing, i heard months ago that WAD2 was next gen. and that would support such transitions.
bobsbbq said:
This is a good UI, and very good theme. I have very much enjoyed converting this them to work on the 320x 320 platform. I think you will see many more using the WAD2 in the near future as it is very flexible and quite responsive and not a memory hog.
Jdume I posted a message on the WAD forum you can respond there or here whichever is more convenient.
Click to expand...
Click to collapse
Hi bobsbbq what programs did you use to convert it to 320x320.
I like to convert it to vga (atleast try) so any help is appriciated.
Greetings Gentox.
Whats the advantages of cooking TF3D onto our rom rahter than installing it via cab fileS. My x1i was getting multiple panel faults and crashes and freezes with my installs done via cab files. I took it back to O2 for a new phone as it was only a few days old, I like tf3d so want it on my new x1i was just wondering does it operate faster when flashed, are there less hangs etc etc.
Ive never seen it work on a touch Hd so dont know how fast its meant to be
orangedavie said:
Whats the advantages of cooking TF3D onto our rom rahter than installing it via cab fileS. My x1i was getting multiple panel faults and crashes and freezes with my installs done via cab files. I took it back to O2 for a new phone as it was only a few days old, I like tf3d so want it on my new x1i was just wondering does it operate faster when flashed, are there less hangs etc etc.
Ive never seen it work on a touch Hd so dont know how fast its meant to be
Click to expand...
Click to collapse
Yes it works better when fully integrated into the operating system ROM from a kitchen
Desperately need TF3D ??
My 2 cents would be: go for a cooked ROM and add the "TF3D as a Panel" cab
I recently found a "free" version of spb 2, im quite keen on this at the moment so ill hive the cooking a miss for time being. When i do go back to tf3d i will use a kitchen.
On a seperate note is there any way to make x1i louder ring is very quiet?
i recommend flashing a super lite rom, which takes out all the nonsense crap u don't use and takes up space.. then install the panels, then install TF3D...
Darans TFeD is the only one which hasn't given me a single freeze or lock up in combination with panels
Hi guys,
Ive downloaded Touch-ITs very good touch flo and so started to download other programs. So far ive done the keyboard and that works a treat.
Problem is ive downloaded the mp3 trimmer and social network engine installed them but cant find them anywhere...how do i access them? can these be used as tabs on the touchflo screen as i really like the interface?
x1fan said:
Hi guys,
Ive downloaded Touch-ITs very good touch flo and so started to download other programs. So far ive done the keyboard and that works a treat.
Problem is ive downloaded the mp3 trimmer and social network engine installed them but cant find them anywhere...how do i access them? can these be used as tabs on the touchflo screen as i really like the interface?
Click to expand...
Click to collapse
mp3trimmer already comes WITH itje's rom. no need to install it again. which "social network engine" are you talking about?
you'll find all programs if you click "start" (upper left) and then "all programs" (lower left).
I used this thread http://forum.xda-developers.com/showthread.php?t=442154 to get the cabs and installed them. Cant find the option to trim MP3s at all. and i downloaded the Touch-It Blackstone Social Network engine. Any ideas?
Im hoping that by downloading the engine that the social networking sites would pop up under the internet tab where youtube is...you know where i mean?
oh, my mistake. you installed the cab and not his rom with manila cooked in...
okay, i'm sorry, but i never used stock rom with manila-cab. but i can tell you this:
- manila works best if cooked in, use a custom rom (i.e. itje's touch-it v.10. but there are many good roms, have a look in the rom-developing-part)
- the cab you used is from november 2008, there's a newer version out now
- "social engine": never saw it in the internet tab, it connects your contacts with a corresponding facebook-friend.
so, bottom line:
programs should show where i told you above, even in the cab i think. and: manila as a cab is slow, cooked-in it flies these days.
caliban2 said:
oh, my mistake. you installed the cab and not his rom with manila cooked in...
okay, i'm sorry, but i never used stock rom with manila-cab. but i can tell you this:
- manila works best if cooked in, use a custom rom (i.e. itje's touch-it v.10. but there are many good roms, have a look in the rom-developing-part)
- the cab you used is from november 2008, there's a newer version out now
- "social engine": never saw it in the internet tab, it connects your contacts with a corresponding facebook-friend.
so, bottom line:
programs should show where i told you above, even in the cab i think. and: manila as a cab is slow, cooked-in it flies these days.
Click to expand...
Click to collapse
I am LOST, however up for installing whatever makes it run that little bit smoother! I like the look of manila i am using now but if there is an upto date one then i can give that a go.
I havent found the ROM you suggested but will keep looking, the first thread i came across (the main one) seems to have the download links removed, any ideas?
Thanks so far mate, youve been a star
Ahhhh think i have found the ROM now just waiting for the file to download now for the installation...
Trying to enter bootlegger mode and all im getting is the coloured screen, try to connect to PC but doesnt do anything, just stuck on coloured screen.....
x1fan said:
Trying to enter bootlegger mode and all im getting is the coloured screen, try to connect to PC but doesnt do anything, just stuck on coloured screen.....
Click to expand...
Click to collapse
typing this from my mobile, so to keep it short:
- you need to apply "hard-spl" first to flash a custom rom (it's a sticky)
- if you're flashing itje's v.10.2, be aware that there is a bug for some people with sending sms. i NEVER had it though. also you'll need to apply 2 or 3 fixes.
- READ READ READ!
if you're going to flash ANY custom rom you'll have to learn a lot. "just install and everything's perfect" won't work. and everytime you flash a new rom you'll loose all data on your phone, so make backup first!!!
if you're willing to get into this - do it. it's worth it and it will really improve your x1. if you want to have everything working out of the box with many restrictions - apple makes such a device...
Ill let you know how i get on, im just loading 10.2 now so we shall see
x1fan said:
Ill let you know how i get on, im just loading 10.2 now so we shall see
Click to expand...
Click to collapse
have fun then.
hope you did a backup of your data - if not, don't come yelling if it's all gone...
edit: the fixes needed
since the thread on v10 is pretty much to read (it started as v7...), for starters the 3 fixes needed with this version.
- Advanced Network (found in itje's first post, under the dl-link for the rom itself)
- "v10.2_corrected_highlights.zip" (also posted by itje, somewhere in the thread, search for it)
extract the files in these two zips to your \windows-directory (on your x1) with total commander (comes with the rom)
- v10.2_smaberg_1_percent_battery.cab (install normally. this fixes a bug that the battery-meter always shows 100% full. alternatively you could install another icon-set from this forum. watch out if they're for WinMob 6.1 or 6.5 though!)
the cooked-in build of opera mobile 9.5 doesn't work with the hardware-keyboard of xperia. either install build 16194 (iit's from an official x1-rom) or try opera mobile 9.7 beta.
every other question you should ask in the thread of the rom you've chosen.
this should set you up, from here on it's all tweaking, lots of reading, learning and adding apps to your likeness.
i have a problem like this one: i installed the touch it manila cab and then i installed the touch it htc album but... i cannot find the program... what do i have to do?
EDIT: ok i found two exe files in the windows folder wich are : HTCAlbum.exe and AlbumSearch.exe, and when i run each of them i have HTC Album... btw the problem is that i have no text in the menus... what may be the problem?
Thanks for all the advice guys...im installed and up and running and so far so good, no issues at all, the sms seems to be working fine etc.
Ill apply the fixes as noted so far as and when i come across the issues!
Cheers again all
caliban2 said:
- v10.2_smaberg_1_percent_battery.cab (install normally. this fixes a bug that the battery-meter always shows 100% full. alternatively you could install another icon-set from this forum. watch out if they're for WinMob 6.1 or 6.5 though!)
Click to expand...
Click to collapse
I cant find this CAB
jup, sometimes the search function takes getting used to... here you go.
caliban2 said:
jup, sometimes the search function takes getting used to... here you go.
Click to expand...
Click to collapse
Mate i looked everywhere, searched forums and then even threads but couldnt locate the cab, im slowly getting used to the site and where to find things so hopefully wont be pestering too much soon
Thanks again
-=W1S3=- said:
i have a problem like this one: i installed the touch it manila cab and then i installed the touch it htc album but... i cannot find the program... what do i have to do?
EDIT: ok i found two exe files in the windows folder wich are : HTCAlbum.exe and AlbumSearch.exe, and when i run each of them i have HTC Album... btw the problem is that i have no text in the menus... what may be the problem?
Click to expand...
Click to collapse
still nothing for my missing menus text problem?
Hello,
since I installed the Cotulla WM6.1 on my magician I tried different today homescreens or plugins like fewidget, throttlelauncher, HTC Home, Androkkid, Manila 2D etc.. some did work, but in the way I wanted - and I'm already at the end with my nerves
Finally I found Wisbar Advance Desktop and it works pretty good. I installed it on my storage card.. BUT there is one problem, I can't switch between themes. There is no theme witch works if I click on change themes, I can see them, I can also click on them, BUT nothing changes, I only get the default portrait theme..
Believe me, I installed the themes correctly..
I also tried to install WisBar Advance Desktop on main memory, but the same.. no difference!
Please can anybody help me!!?
I don't know, maybe I have to install something else like .NET?? I have installed .NET 3.5
Greets,
Tata
screw it, if it won't work then just go for something else, manilla 2d is awesome, it is fast and leaves enough ram to be able to use afterwards