Hello,
since I installed the Cotulla WM6.1 on my magician I tried different today homescreens or plugins like fewidget, throttlelauncher, HTC Home, Androkkid, Manila 2D etc.. some did work, but in the way I wanted - and I'm already at the end with my nerves
Finally I found Wisbar Advance Desktop and it works pretty good. I installed it on my storage card.. BUT there is one problem, I can't switch between themes. There is no theme witch works if I click on change themes, I can see them, I can also click on them, BUT nothing changes, I only get the default portrait theme..
Believe me, I installed the themes correctly..
I also tried to install WisBar Advance Desktop on main memory, but the same.. no difference!
Please can anybody help me!!?
I don't know, maybe I have to install something else like .NET?? I have installed .NET 3.5
Greets,
Tata
screw it, if it won't work then just go for something else, manilla 2d is awesome, it is fast and leaves enough ram to be able to use afterwards
Related
i have a tmobile Wing running wm6 and i have tried all htc touch apps on this website and they dont work for me... can someone either upload working apps(like the contact manager, the comm. manager, the cube thing) or upload a working ROM of the HTC touch(which will work on the WING) for the 64 bit computer??
how are you installing them?
you realise you put the cab file onto the phone then execute it there rather than your pc right?
thats the impression i get from your post...
yes i know that, i am not a nub... i have installed many apps, but they end up screwing up my phone cause it works so slowly
bump ...
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
well, i transfer it to my storage card, and then run it. later i get a successfully installed message. i soft-reset my phone and then either the program doesn't start up, puts my phhone in a infinate reset mode, or doesnt work correctly.
the htc cube is installed, but i can see the cube! i see this S icon, and a P icon when i slide my finger from bottom to up . since it didnt work, i unistalled it.
the contact manager from the all htc apps extracted sticky starts up, but i cannot change the theme! i see the regular old contacts manager with a white bar, when i run my finger over it, it shows a letter, and scrolls to it, but doesnt have the touch interface i need, and its not graphical at all
and the comm. manager REMOVES my comm. manager, rather than adding one
i am running wm6, boots fine now, the following htc apps
-audio manager
-htc touch theme
-htc album
-htc touch skin for wmp
-spb backup
-htc touch wait cursor(got from freewarepocketpc.net)
that should explain a lot
mr_ding said:
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
Click to expand...
Click to collapse
explode? can you please post some links and i will try them and replay asap
The 'htc cube' your talkin about is not the actual cube. its called FTouchFlo and is used to scroll and launch programs by using gestures. the changing between s and p is changing between launching mode and scrolling mode. What your looking for is the TouchFlo cube, which i belive must be cooked into a rom to work well. there are other options out there that can be cab installed, just search around the forums.
u mean something like this?
http://forum.xda-developers.com/showthread.php?t=343583
i tried that but in the instructions, i dont know what the prequisites are n i dont have em
i copied the shortcuts to the startup folder and then i ran the program in the folder containting the exe file that came with the zip
can someone post a cab, that i run, and will configure my phone that it works... i dont want to do the "remove the following apps from the startup folder...", the cab file should do that...
i also have problem with touchflo. i saw a lot of threads on it and i dun know which 1 i have to follow and install.
and if any expert here can help me.
1. i am on wm6. not htc theme.
2. i am on wisbar and wisbar desktop
3. device is atom life.
and i want to use the touchflo. can anyone assist me?
can i do the swiping even my screen is on the wisbar?
can anyone help me with this.
help is greatly appreciated.
thanks!
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
killeredge said:
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
Click to expand...
Click to collapse
yes. i want also.
bump? ...
bump ??
come on ppl, i am sure that someone has gotten touchflo to work
Hi guys i found this on ppcgeeks.com
http://forum.ppcgeeks.com/showthread.php?t=28385
Can anyone rewrite the cab - I mean i´m german and i´m useing a german rom and the the cab install will install everything on storage card - but in german system its called Speicherkarte.. Can anyone help
I tried this last night, and had nothing but problems, had no responce from the screen, it worked once, and i will admit that it looked very nice.
it just stopped responding, i couldnt even get into the settings or file explorer to remove the WAD or WA from startup folder.
in the end i had to hold the windows and ok hard keys on my touch cruise to reset the damn thing.
I would suggest you back everything up if you try these cab's.
good luck, i hope you all have more luck than me.
WAD2 is still in RC form...there are still bugs that are being worked out till a final release.
joey jojo said:
I tried this last night, and had nothing but problems, had no responce from the screen, it worked once, and i will admit that it looked very nice.
it just stopped responding, i couldnt even get into the settings or file explorer to remove the WAD or WA from startup folder.
in the end i had to hold the windows and ok hard keys on my touch cruise to reset the damn thing.
I would suggest you back everything up if you try these cab's.
good luck, i hope you all have more luck than me.
Click to expand...
Click to collapse
That sounds bad...
I hope someone makes it multilangual....
I tried it on my Orbit 2 ..Works really well and responsive...like the animated gesture transitions...(imho its the fastest diamond theme available)
I just installed the deskop not the taskbar thing(don't like it)
Very configurable....still playing with it...
This is a good UI, and very good theme. I have very much enjoyed converting this them to work on the 320x 320 platform. I think you will see many more using the WAD2 in the near future as it is very flexible and quite responsive and not a memory hog.
Jdume I posted a message on the WAD forum you can respond there or here whichever is more convenient.
i used to use WAD for getting the vista theme on my device, really need to get into it again, cos i think probably did something wrong.
i might try again in a few weeks when i have some more spare time, does the diamond theme have any cool transitions? i mean close to the original thing, i heard months ago that WAD2 was next gen. and that would support such transitions.
bobsbbq said:
This is a good UI, and very good theme. I have very much enjoyed converting this them to work on the 320x 320 platform. I think you will see many more using the WAD2 in the near future as it is very flexible and quite responsive and not a memory hog.
Jdume I posted a message on the WAD forum you can respond there or here whichever is more convenient.
Click to expand...
Click to collapse
Hi bobsbbq what programs did you use to convert it to 320x320.
I like to convert it to vga (atleast try) so any help is appriciated.
Greetings Gentox.
hi guys just bought my diamond ,you are making huge work here for all of us
i have tried several programms without a sigle problem
but when i install the cab file for the wallpaper in all tabs nothing happens ,i don see the wallpaper except the moment the device opens
i tried to install both the device and the internal memory
i have rom 2.03.401
any suggestions and ideas, it works on all of you?
maybe has something to do with the themes?
I installed the Background4all today for the first time because I was a little sceptical about how well it works and looks, but I have to say that I am thoroughly impressed and happy with it. It works perfectly on my Touch Diamond.
You should install it to your device because it copies the files to your Windows directory where your Manila can use them. If it's in your Internal Storage, then Manila doesn't know it's there or to look for it there.
As to why it doesn't work, I don't know, sorry. I also have the stock 2.03 ROM and I had to soft-reset after installation to see the change, but other than that; mine works fine.
Rep to mun_rus for this :-D
Well folks,
Good morning everyone, I have a serious problem ... lol.
I have tried all (I said all) roms from this site amazing and wonderful. I love the design manilla 2d and hate the titanium.
My problem is: I do not think a WM6.5 ROM with manila 2d to not get warning "low memory" on my htc touch elf. I already tried installing the Manila 2d on a clean ROM with wm 6.1 htc touch, but it was good.
Another problem I have: I want to qualqur cost the digital clock that comes in manila, it is very beautiful ... the problem is that whenever I finish any connection, or some program and put on the screen at home, the hours go back one hour behind by about 2 seconds and return to normal again. That's a bummer, I tried in HKLM to change the delay time, but only solved the delay when the phone is in sleep mode and switches to normal mode.
Please, if someone can help me, I need a rom with manilla already installed, but it uses little memory in order to install a ROM 6.5 with manila already included.
Thank you in advance.
Vincent.
Not quite sure what you are asking here (its early and I'm not quite with it) bt I'll reply anyways.
From what I understand, your installs of Manilla 2D are taking up to much space on your installs, leaving you less space to sinatll apps straight to the phone?
Have you tried all of the mods in [UPG] P_D Optimizations [03.14.10: ELFin HD2 Theme] ? This has a lot of tweaks and space saving optimisations for the Elf(in) and are very well explained as well. Could be worth a shot.
Hope this helps.
Stu
Thanks a lot capitanstu72, i will try this, optmized my htc elf and put results here.
Again, thanks.
I tried to put the custom theme that I indicated, but the theme will not boot, it worked.
I'm confused to what you mean. You say it didn't boot, but it worked? How so?
Have you tried using M2DC to remove some tabs to see if it works. You may have to disable footprints unless you have installed that part seperately.
try milky 6682 if u havent tried it ..... consumes 34mb memory on default
I've installed RealVGA and am running 96 dpi. I installed the M2D and everything seems to be running fine, but it isn't expanded to the whole screen. Anyone have a fix? I've been struggling with this crap for a couple days now..
nm.. i fixed that part so it expands to the whole screen by copying the htc home settings file to my registry, but now it's glitchy on the right side when switching between tabs
can you explain? i used m2d for a bit, but in the end i decided it wasnt worth it, because all the extras that go with it are very incompatible. screenshot would be nice =] im a noob for the most part, but i can try to help you out. i know that manila in one cab is a great way to go. personally though i use titanium on my flashed rom