Hi there,
I've searched the forum but could not find this problem yet.
90% out of the time when I boot the sytem it does not start the touchflo software. I need to reboot it again after which it does start.
Any thoughts?
Thanks,
Cbx.
Same for me.. but for 50%.
I suspect S2U2 or maybe the SIM pincode form to make troubles with touchflo
Sounds weired but open the keyboard and type your pin in landscape mode. Don´t know why but it works
I have found this to work.
Put the device in Airplane Mode before you reboot. It works for me.
I have put an manila.exe shortcut on windows/startup folder.
Now all´s working fine.
By the way, this is a great piece of hardware.
Hmm,strange, never happened to me before, has been using more than 1 month now. Restart many times, and TouchFlo still start normal.
Maybe you have to many third party software installed :>
Same problem here.
Already posted in lots of threads around, looking for an answer. I even hardreset the device trying to isolate the problem. At first I thought it would be s2u2, but then I found that Max TTM places a "shake" program in the startup folder. After removing it, the device started loading TF3D fine (most of the time).
Since it happened again already once, my conclusion is that neither the shake program nor s2u2 are the true softwares to blame. I think it is something in my startup folder tho.
I had the same problem..
And i solved it, by uninstalling S2U2 I really like S2U2 but i had to uninstall this to get TF3D working directly.
This is what happened to me in detail:
1: Installed S2U2 > Reboot > TF3D Won't Boot
2: Reboot > TF3D Won't Boot
3: Reboot > TF3D Won't Boot
4: Reboot > TF3D Boots
Every 3 resets TF3D boots, otherwise nothing will happen.
When uninstalling S2U2 everything was fine.
ark666 said:
I have put an manila.exe shortcut on windows/startup folder.
Now all´s working fine.
By the way, this is a great piece of hardware.
Click to expand...
Click to collapse
Did that! Thanks! Solved the problem...
StealthNet said:
Did that! Thanks! Solved the problem...
Click to expand...
Click to collapse
Since I'm a total N00B, can someone tell me how I can do this?
I'm glad by the way that I am not the only one woth this problem
Thanks again
I've found that if I put my PIN fix in the Phone settings so you don't need to enter it anymore upon booting the phone TF3D always launches...
And must say, when I use shortcuts to reset the device it won't boot neither, but when I shut down the phone and start it again it starts...
Ok, I think I just spoke too early. I give up.
Already thought that S2U2 was causing the problem. Thought it was Max TTM... but thing is, after using the manila.exe shortcut, the clock doesn´t work anymore (it gets the time when it booted but stays there).
So, basically, add me to the ones that have this problem. Tbh, I guess I´ll just hardreset the phone right now. Argh!
Hiho and hello to everybody (1st Post )
I have the same problem but with my TP2 it helps disconecting the phone from the cabel. The last 20 resets TF is starting.
Hope this will help you.
Balu
since i installed MAX TTM i have this problem! even if i launch it from \windows\manila.exe...time doesnt work...
cbx_smtp said:
Since I'm a total N00B, can someone tell me how I can do this?
I'm glad by the way that I am not the only one woth this problem
Thanks again
Click to expand...
Click to collapse
In FileExplorer you tap and hold the manila.exe file in the \Windows folder. In the pop up menu you choose copy. Then move to the \Windows\StartUp folder and tap and hold in a blank spot. Choose paste shortcut in the pop up menu. That's it, or at least one way to do it.
I don't think manila.exe is a hidden systemfile, unless the entire \Windows folder is hidden. Then you will have go to options and tic the show hidden files.
Same thing with touchflo. It doesn´t work. Any modificaion causes problems with tf3.
The method with starting in flight modus works fine and another method with entering PIN with hardware-keyboard works too. I think there is a bug with PIN-keyboard and i hope it will be patched. Anyway i´ve heard win 6.5 coming soon as an oficial update and then... maybe this tf3 problem will not be relevant for us.
I hope it´s sounds english enough to understand it.
Same problem.
I solved deleting the cleartemp startup shotcurt on windows/startup.
How many of you guys/girls, have the 1% battery cab installed?
I have same problem , but before install the 1% battery cab.
Also have 1%Battery thing, but had the problem before.
I feel, that if I wait a few seconds before typing in the pin until all icons in the upper right corner are present, booting touchflo3d works fine.
Please try!
Related
TF3DOnnOff Paket by JeckyllHavok
UPLOADING UPDATED FILES YOU NEED TO REPLACE THE AUTOOFF.MSCR!!!!
Hi there with this collection off scripts you get the possibility to power on/off your device with TF3D enabled, also a little auto Off Function is Included.
Just download the attached zip folder and unpack all files to the root of your device.
Then copy TF3D-DisplayOff-mscr to your programs folder and map it to a button.
Now run the writenotification.mscr, (you need this file just at the first time, do not run it twice)
Now reboot your device with tf3d disabled in today plugins.
After reboot you should notice that TF3D starts.
Now with the button you mapped the tf3dDisplayOff Script to you can put your device to sleep with a keypress.
To power it back on just press power button.
If TF3D is disabled you can start it with the maped button too.
After 5 minutes a windows apear which will ask if device should go to sleep, if you press yes or do nothing device goes to sleep, if you press no the window will reapear in 5 minutes, i make that cause i miss that device with TF3D won't go automaticlly to sleep.
To remove the scripts just run remove notifications.mscr and delete the files.
hey i can't seem to get it to work on my nike..
how do you run writenotification.mscr???
My device says: first run program, then file.
And do you know a way to reload the clock so it starts on 00:00 and then flip down. Mine only does that when i enable the plugin the first time after it has been disabled.
hey i can't seem to get it to work on my nike..
how do you run writenotification.mscr???
My device says: first run program, then file.
And do you know a way to reload the clock so it starts on 00:00 and then flip down. Mine only does that when i enable the plugin the first time after it has been disabled.
Click to expand...
Click to collapse
Do you have MortScript installed on your device?
Just open the file like an audio file for example.
what do you mean by unpack all files to the root of your device.
in the attached zip file are several mscr files. Copy them to the main directory of your phone
can't work for me.... i must locate files in windows folder or anywhere in my device? when i click on mscr file WriteNotification.mscr nothing happens why?
can't work for me.... i must locate files in windows folder or anywhere in my device? when i click on mscr file WriteNotification.mscr nothing happens why
Click to expand...
Click to collapse
There comes no visible notification when clicking on write notification, place all files like this
\
\Windows
\My Documents
\Program Files
\...
\...
\...
pim.vol
*.*
*.*
<<--Extract here the files from the zip file
and now place a second copy of TF3D Displayoff.mscr in \Windows\Start Menu\programs\HERE...
Before you start right press remove notification and open it, and noe the same with erite notification.
Now map TF3D Display OFF to a button of your choice and disable TF3D in today plugins and restart.
If it works you will notice that TF3d start...
JeckyllHavok said:
After 5 minutes a windows apear which will ask if device should go to sleep, if you press yes or do nothing device goes to sleep, if you press no the window will reapear in 5 minutes, i make that cause i miss that device with TF3D won't go automaticlly to sleep.
To remove the scripts just run remove notifications.mscr and delete the files.
Click to expand...
Click to collapse
who does that part work? i dont get it
Uhhhhhh....
Sorry--what is this mortscript and where do we get it..? lol
telegraph0000 said:
Sorry--what is this mortscript and where do we get it..? lol
Click to expand...
Click to collapse
What about search function? Or Google?
This prog. freezes up my Kaiser to the point of a soft reset. I see TF3D start automatically after a reset, but when I press the assigned soft key to 'sleep' the screen goes off for a second, comes back on, TF3D is gone, and the unit is unresponsive...
doesnt work...I followed your instruction explicitly....and 1 after the inital reboot...tf3d doesnt come up and when activating the TF3D Displayoff.mscr its just dims my screen...howeever I'm still testing
ljinsane said:
doesnt work...I followed your instruction explicitly....and 1 after the inital reboot...tf3d doesnt come up and when activating the TF3D Displayoff.mscr its just dims my screen...howeever I'm still testing
Click to expand...
Click to collapse
I'm on 3. Nothing. If I take any longer with this phone tonight, my girl is going to KILL me. I'll play again when she goes to bed.
ljinsane said:
doesnt work...I followed your instruction explicitly....and 1 after the inital reboot...tf3d doesnt come up and when activating the TF3D Displayoff.mscr its just dims my screen...howeever I'm still testing
Click to expand...
Click to collapse
I have had this on my phone for the last few days...not only does it not work consistently but I cant uninstall the damn thing...'remove notifications' script does not work at all ...I'm going to have to do a hard reset(no big deal though) to get it off my phone.
To the OP...I appreciate your efforts but please PLEASE test and make sure your apps work as advertised before releasing in the futre...these scripts have far too many flaws
I have had this crapware on my phone for the last few days...not only does it not work consistently but I cant uninstall the damn thing...'remove notifications' script does not work at all ...I'm going to have to do a hard reset(no big deal though) to get it off my phone.
To the OP...I appreciate your efforts but please PLEASE test and make sure your apps work as advertised before releasing in the futre...these scripts have far too many flaws
Click to expand...
Click to collapse
If anyone here is playing around with TF3D for qvga or the drivers you should know that everything with this is still instable and beta´.
The script to it works on some roms and on some not,
If i hear questions like what is mort script and so on i think noone of you should anything of this, caus you are unable to use a search button.
Next versions of the script are posted in the new TF3D Manila dev. forum.
I think everything is posted there (that has to do with manila) until development is ready.
Cause everyone here is always asking the same questions.
If someone can't get rid of the notifications.... mmhhh.... search and you will find a solution how to edit the notifications on your your phone. Hard reset was not needed.
JeckyllHavok said:
If anyone here is playing around with TF3D for qvga or the drivers you should know that everything with this is still instable and beta´.
The script to it works on some roms and on some not,
If i hear questions like what is mort script and so on i think noone of you should anything of this, caus you are unable to use a search button.
Next versions of the script are posted in the new TF3D Manila dev. forum.
I think everything is posted there (that has to do with manila) until development is ready.
Cause everyone here is always asking the same questions.
If someone can't get rid of the notifications.... mmhhh.... search and you will find a solution how to edit the notifications on your your phone. Hard reset was not needed.
Click to expand...
Click to collapse
on the contrary..due to time...a hard reset was needed..I dont have time at this particular moment to dig and search for a solution... it is much less time consuming for me to harrd reset and restore from a back up. If you have solution to the notifications issue you should have posted it ...not trying to diss you but seriously...what was the point?
If after the write notifications script, you start the remove notification script all is good.
look into the scripts and you will see that the one does the oposite of the other.
Don't know why it dowsn't work for you.
Try the attached one, it doesn't do anything with notifications, in the archive there is a readme file.
If you don't want this anymore just delete the scripts and the lnk file(make a backup of the old one if it's there)
JeckyllHavok said:
If after the write notifications script, you start the remove notification script all is good.
look into the scripts and you will see that the one does the oposite of the other.
Don't know why it dowsn't work for you.
Try the attached one, it doesn't do anything with notifications, in the archive there is a readme file.
If you don't want this anymore just delete the scripts and the lnk file(make a backup of the old one if it's there)
Click to expand...
Click to collapse
great post. I will test it out.
JeckyllHavok said:
If after the write notifications script, you start the remove notification script all is good.
look into the scripts and you will see that the one does the oposite of the other.
Don't know why it dowsn't work for you.
Try the attached one, it doesn't do anything with notifications, in the archive there is a readme file.
If you don't want this anymore just delete the scripts and the lnk file(make a backup of the old one if it's there)
Click to expand...
Click to collapse
I have been using this most recent one and it has proven to be the best solution thus far! Is there any type of update on this method since your last post? I am not a member of the developers forum but I feel you are on the right track and hate to be excluded from future developments.
Thanks for all of your work!!!!!
Great, work. This is really the workaround that makes TouchFlo3D worth it for me. The turning off is smooth, whilst it takes a bit too long to switch on (I know that's touchflo and not your script).
I couldn't get the autooff to work. The instructions say to paste the autooff and poweron in the root folder. Shouldn't poweron be in the windows/startup folder? Otherwise I don't see how that script is being called? Or are the scripts in the root folders run automatically?
Is the newest mortscript beta release required for the latest version of this to work? Or would 4.05 or 4.1 do just as well?
Thanks for the good work!
Edit: Ah, the short_power.lnk calls poweron. But doesn't that means you have to manually enter standby and then wake up every time you softreset?
Hi
Today I decided to try iDialer from Supware.net. After installing and soft reset, my device will not launch Touch Flo 3D. During the reboot, when the screen comes to the point where it launches Touch Flo, it now says "Tap here to launch TouchFlo"- something it has never done before. So I tap the screen it says "Launching TouchFlo 3D", but then switches back to the "Tap Here" message and stays stuck there. I have since removed iDialer with no success.
Can you please help me with this issue?? Something has gone terribly awry and I DO not want to have to perform a Hard Reset......
Lee
BUMP.....
I had inadvertently edited a manila file and it caused the problem. All back to normal now.
Thanks to Doug @ Supware.net for the quick reply.
Lee
wat did you do to fix the problem cos i had the same problem. I uninstalled the theme that put and still, its not working
Pls i need help
I have the same problem. Is there anyone who can provide a step by step guide on how to fix this?
Thanks in advance.
hmm... sounds familiar...
I remember having that problem after installing a "D3D driver" or GLES files from somewhere. When I removed them everything went back! But thats just what I did, so, what did YOU do?
overwriting (libgles_cm.dll and libgles_mn.dll ) in the windows directory will do this to you -cause these symptoms, that is. If you did do that, go into windows and delete those files and reset, thus causing the OS to magically replace them from ROM.
Tell me if that works, maybe I can push it on CNN -no, seriously, I hope it works for you guys...
Cheers
I had the same problem, I deleted everything and nothing changed so I had to make a hard reset. About 3 days ago i installed Pamas Transparent Slider and i had the same problem again. I turned off touchflo, removed the slider and then I made a soft reset and then tf3d loaded.
http://forum.xda-developers.com/showthread.php?p=3452270#post3452270
The UAD-TouchPROLandscapeE.cab i made here contains the full TF3D files from the TouchPRO (latest version as of 03/2009)
if its a problem with manila this should fix it, if this doesn't work then it might be hard reset time
Happened to me too, tried to change the language of TF3D and he did not open, back to English back to normal everything!
Thanks for the quick responses.
I have a Touch HD and have tried to replace libgles_cm and libgles_mn files (libgles_cm is part of the ROM and cant be deleted and libgles_mn didn't exist so I installed it), but alas, still no luck.
I also tried The New Landscape, but this didn't load either (I can see the Gecko app while browsing and can run the exe which lists various apps) but I cant get any front end on the screen.
Thanks again for your input, looks like a hard reset is in order
i have no idea what i did to mine, i just plugged it into my xp machine to charge the bettery and some error came up on the computer screen about it not being able to synch and now touchflo will not launch. grrr i really hate HTC. Just going to do another damn hard reset, just like every other f'kn month. Using stock rom, if i had not paid so much for this pos i would have smashed it into dust months ago.
i had the same problem.. about the "tap screen to launch touchflo 3d.. i just uninstalled the spb shell and booted it.. started working
VivianAmbrose said:
i had the same problem.. about the "tap screen to launch touchflo 3d.. i just uninstalled the spb shell and booted it.. started working
Click to expand...
Click to collapse
You may need the Diamond TF3D Config to be able to start TouchFlo 3D on devices
try to visit the http://www.freewarepocketpc.net/ppc-download-diamond-tf3d-config.html
Hi all,
each time I shut down Opera, it crashes, and I have a screen explaining me Opera crach ......
I've the stock release.
This issue appeared one day but I don't know when, maybe a problem with an installed application ????
Any idea to fix it ?
Kaz
Did you install Flashlite 3.1 ? That program makes opera slow and unstable.
thx for your answer,
no flashlite on my phone .......
Kaz
I have the same thing, I have installed quite a few things lately though.
Guess the only option is to hard reset and start over.
i have the same prob. installed latest beta last night still has the same prob. means i cant change the settings and save them, so cant impliment that iplayer fix as a result.
I think I solved the problem. In my case it appeared after I played with build 2808. Opera started crashing on exit and even hanging the device. It turned out that while I didn't have Flash installed, opera.ini still pointed to a non-existing plugin folder, \Windows\Opera9\plugins. So I simply went to opera:config, found the path setting, reset it to default (blank), and the problem is gone!
No, today it started crashing on exit again for no apparent reason, and what's worse, it hangs the device completely!
Does anybody have stock unmodified files so I can try to replace what I have in \Windows\Opera9?
when you say crash, is this when you get the thing asking you to send an error report to m$? if so i get the same thing. i'm unsure whats causing it and dont want to hard reset. the way i olook at it currently is it doesnt seem to crash when i actually use opera so i try and ignore it
Found it!
I had installed that Seismo thing that needs HTCAPI.DLL in the windows folder.
When I removed that, no more Opera crash (yes the one where it asks to send a report to MS)
And I did a hard reset for that!
Pierced Soul said:
when you say crash, is this when you get the thing asking you to send an error report to m$? if so i get the same thing. i'm unsure whats causing it and dont want to hard reset. the way i olook at it currently is it doesnt seem to crash when i actually use opera so i try and ignore it
Click to expand...
Click to collapse
In my case it was sometimes hanging the whole device. I had to reset it using the button in the battery compartment.
I solved the problem finally (at least it's been working for a whole day without any crashing) by uninstalling .Net CF 3.5 and Gyrator 2
HugoTouchHD said:
Found it!
I had installed that Seismo thing that needs HTCAPI.DLL in the windows folder.
Click to expand...
Click to collapse
I still have HTCAPI.dll in my \Windows, no crashes.
HugoTouchHD said:
Found it!
I had installed that Seismo thing that needs HTCAPI.DLL in the windows folder.
When I removed that, no more Opera crash (yes the one where it asks to send a report to MS)
And I did a hard reset for that!
Click to expand...
Click to collapse
Confirmed. I did it as well. I tried it before removing and got the crash. i removed it, loaded opera, exited it and no crash.
I installed that .dll because VR Hologram needed it.
frustin said:
I installed that .dll because VR Hologram needed it.
Click to expand...
Click to collapse
Same here. Although the strange thing is why it's not crashing with this dll in my \Windows folder.
Maybe it's a trilateral conflict between Opera, .NET CF 3.5 and the dll, and removing one of the three solves the issue?
vangrieg said:
Same here. Although the strange thing is why it's not crashing with this dll in my \Windows folder.
Maybe it's a trilateral conflict between Opera, .NET CF 3.5 and the dll, and removing one of the three solves the issue?
Click to expand...
Click to collapse
That sounds plausible, I still have .NET CF3.5 without the DLL and have not had Opera crashing since removing HTCAPI.DLL, I need .NET for more than that DLL.
Added this to the HD Wiki page
HugoTouchHD said:
Found it!
I had installed that Seismo thing that needs HTCAPI.DLL in the windows folder.
When I removed that, no more Opera crash (yes the one where it asks to send a report to MS)
And I did a hard reset for that!
Click to expand...
Click to collapse
I confirm. Removal of the htcapi.dll file also solved my opera crash problem.
HTCAPI.DLL versions
Hi All,
I had the same problem with Opera crashing the phone on exit.
today I found that I have 2 htcapi.dll on my desktop that it seems I have downloaded. I was about to delete one of them when I realized that they have different sizes. one around 7KB and the other one around 4 KB.
so I checked the one installed on my HD and it was the 7KB so I replaced it with the smaller one, and so far no crash anymore.
I hope this will help you guys.
I am attaching the file for you to try.
Regards
Bassem
Hey all. I am still having this problem even after deleting the above .dll. Basically when I go to exit opera, the whole phone locks up and I have to hard reset or remove the battery and reset the phone that way. Any suggestions as to what could be going on? It only started this 3 days ago, and I ahven't installed any new apps/programs in the past week.
Edit, solution found in other thread http://forum.xda-developers.com/showthread.php?t=468861
Hey guys,
Right now my Leo is unable to launch HTC sense after I did a soft-reset after modifying the registry "Change - CacheSize to 4096" gotten from the Leo Hints & Tips thread as well as uninstalling Nimbuzz.
Also I also created a shortcut for Task Manager to put into the start menu and added it to the Manilla shortcut at the main page.
A couple of soft-resets still doesn't solve it, and sometimes it will say tap here to start HTC Sense but tapping doesn't do anything. Able to open the dialing menu but takes quite awhile.
Pressing the contacts menu gives the error message "The file "contacts" cannot be opened. Either it is not signed with a trusted cert, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
Any ideas?
Got the same problem.
Duttys HD Holy Grail
I tried to reinstall the rom but I can't connect with usb.
did you try that?
same problem here.
rom is 1.48 from stock.
also had the unable to launch sense error, couldnt find a way to solve it so i had to hard reset (AGAIN!!)
having to link 90 contacts with facebook manually sucks!
Does anyone have been able to solve this problem? I faced it today, I was doing some tweaks to my HD2, did some soft resets but then sudenlly it stops working, Sense freezes and has been unable to launch it, sometimes I can access to start menu but I can't load anthing, every link I tried to open tells me that the file cannot be opened either it's not signed or one of its components cannot be found. Nothing but the phone can be opened.
My rom is 1.48 stock.
Is the only solution for this a hard reset?
vhjc said:
Does anyone have been able to solve this problem? I faced it today, I was doing some tweaks to my HD2, did some soft resets but then sudenlly it stops working, Sense freezes and has been unable to launch it, sometimes I can access to start menu but I can't load anthing, every link I tried to open tells me that the file cannot be opened either it's not signed or one of its components cannot be found. Nothing but the phone can be opened.
My rom is 1.48 stock.
Is the only solution for this a hard reset?
Click to expand...
Click to collapse
I faced similar problem before if I added the tweak of FATFS=4096. I did "hard reset" and then reinstalled all stuffs. I reinstalled all programs and readded the tweaks except FATFS one. The phone resumes normal.
It seems to me that the tweak of FATFS may not work on HD2.
Yes, actually I managed to remove that tweak without hard reset it, reverted it to FATFS=0 and everything came back to normal, my HD2 is now like it was before.
We MUST warn every HD2 owner to not apply this tweak.
I've cautioned this particular tweak on the main thread before.
changing the FATFS would hanged the HD2 (ROM: 1.48 Asia Region) and you'll need to hard reset to revert to the default settings.
Ohhh I didn't see that...
Thanks calyon!
vhjc said:
Yes, actually I managed to remove that tweak without hard reset it, reverted it to FATFS=0 and everything came back to normal, my HD2 is now like it was before.
We MUST warn every HD2 owner to not apply this tweak.
Click to expand...
Click to collapse
HOw you do that?!
First I disabled HTC Sense from Home, then I move to the top of the start menu the registry editor (in my case it's SKTools Registry Explorer), then I turned it off and on several times and every time I tried to run the registry editor, when I was unable to run it I turned it off and on again, until I was able to run the registry editor, then navigated to HKEY_LOCAL_MACHINE\System\StorageManager\FATFS and changed back the FATFS to 0.
I don't know how many times I've had to turn it on and off, but I thinks it's better than do a hard reset, specially if you don't have a backup or your data.
vhjc said:
First I disabled HTC Sense from Home, then I move to the top of the start menu the registry editor (in my case it's SKTools Registry Explorer), then I turned it off and on several times and every time I tried to run the registry editor, when I was unable to run it I turned it off and on again, until I was able to run the registry editor, then navigated to HKEY_LOCAL_MACHINE\System\StorageManager\FATFS and changed back the FATFS to 0.
I don't know how many times I've had to turn it on and off, but I thinks it's better than do a hard reset, specially if you don't have a backup or your data.
Click to expand...
Click to collapse
I confirm... This is working!
(considering you have a reg editor already installed of course)
Thank you very much vhjc... you saved all of us lots of painfull time!
Hello,
I just changed the FATFS registry value to 4096 based on the tweaks hint & tips and now my HD2 hangs and couldn't launch the HTC Sense app. Reading the responses above, it seems that it's possible to disable HTC Sense from Today setting in this kind of condition. However no matter how I tried to click on the "Setting" icon on the Start Menu screen, I only got the error window saying that the program is missing and we need to restore or reinstall... I couldn't connect the device to my laptop thru activesync to remove the registry since the activesync app (the switcher between storage device & activesync window) failed to load as well...
Could you please share how did you manage to go to the Today setting window to disable the HTC Sense? I couldn't see any other options since no other shortcuts are available, nor I can run any app from the start menu Is there a way to load HD2 standard WinMo OS in safe mode only...?
I'm really desperate on this situation and as much as possible I don't wanna hard reset my HD2 since I haven't done any backup yet...
Please help... Thank you very much in advance!
cheers
Im getting the unable to launch htc sense message too, even after a hard reset the problem re-occurs. can anyone advise me what to do??
Sorry, should have mentioned this above, I have not changed the registry setting of fatfs to anything other than 0, so this is not whats causing this problem for me. I have tried using a reg editor ro confirm the setting is 0 still no luck.
before the problem occurs i get an error reporting message saying theres been a problem with manila.exe
Any help pleeeease....
conantroutman said:
Im getting the unable to launch htc sense message too, even after a hard reset the problem re-occurs. can anyone advise me what to do??
Click to expand...
Click to collapse
I have just encourntered the very same problem with HTC Sense - and I have not changed anything on my phone for days, if not weeks...
Anyone????
I have just encourntered the very same problem with HTC Sense - and I have not changed anything on my phone for days, if not weeks...
Click to expand...
Click to collapse
Me too. I wasn't even using the phone when I got an error reporting message about manilla. Several soft and 1 hard reset but sense still cannot load.
4braid said:
Me too. I wasn't even using the phone when I got an error reporting message about sense. Several soft and 1 hard reset but sense still cannot load.
Click to expand...
Click to collapse
Literally just in the last hour or so?
Something very odd is going on here...
The same happened to mine 2 hours ago. Didnt make any changes to the device or installed any software etc Tried soft resets but no joy
Im considering a hard reset unless someone has a fix please
Mine has done exactly the same thing!! was working fine earlier on the way home from work, went to check it about 6pm and it had locked saying a problem with Manilla.exe had occurred... couldn't get it to do anything so took out the battery and ever since HTC sense wont load..
Everything seems fine, al programs work, phone is ok etc just sense wont load, was just about to do a hard reset after backing up data and removing card when i read this post so stopped...
Has anyone else had this?....
some threads get close, but no concrete help found...
Stuck in "Launching HTC Sense..."
Anything I can do, besides from flashing a new ROM?
Using a cooked ROM, with several programs/tweaks on it.
build 28205, sense 1922, taskbar showing, bottom row showing, background showing
ROM had been running without a problem for days.
Removed of course SIM & SD cards to remove interference
Hard reset, battery removal no change
Did you tried to reflash your device via the tri-colors screen mode?
yep. just did, no problem there.
just would have liked (or:want) to figure out how to bypass HTC Sense launch......
when xda quickmenu is installed (as I had), then sometimes by pressing the taskbar, quickmenu's popup window is shown, thus access to a file manager, thus a possibility to solve a htc sense problem. This time however, something stopped BEFORE quickmenu started, and I was stuck.
Did you have access to the start menu?
If yes, launch a file explorer, install bsb tweaks 1.6, launch it. Put Windows Settings to ON, soft reset.
After the soft reset, go to start menu -> settings -> Today -> Items, uncheck Sense.
I understand your problem...
No pen-pen, he cannot access anything in WM if Sense freezes while loading at startup: I have the same problem and tried to solve it loading different ROMs and talking here on XDA but for now no result.
The only thing I know is that for some unlucky guys the couple WM 6.5.3 (or later versions) together with Sense is lethal. At some point. The freezing happens after a Soft Reset usually (mainly because is time for Sense loading) and then only a Hard Reset can get out the situation because it's there everytime you Soft Reset.
Look for this program: SafeMode. It works like a charm but you have to pay or use the 14 days test.
That's why I asked if he had access to the start menu.
I didn't have this bug and, so far, I'm in WM6.5.3 since the release of the HSPL.
Did you tried to install your SPB software on wm 6.5.3? it could work. Maybe with some graphical glitches, but it could let you make a backup before the HR.
Also, I've played with Manilla 2.1 and LUA a long time ago when I was young( ), and each time I made a mistake, Manilla was freezing, BUT, after some time, I could have access to start menu to deactivate Manilla and make some debugging.
Maybe you're trying to install some bugged mod or created for an old build of Sense.
Did you checked that?
vonkarayan said:
The only thing I know is that for some unlucky guys the couple WM 6.5.3 (or later versions) together with Sense is lethal. At some point. The freezing happens after a Soft Reset usually (mainly because is time for Sense loading) and then only a Hard Reset can get out the situation because it's there everytime you Soft Reset.
Look for this program: SafeMode. It works like a charm but you have to pay or use the 14 days test.
Click to expand...
Click to collapse
Hard reset did not solve it either. Hard reset gave the exact same problem.
Tried WM 6.5.3 and 6.5.5, both with sense 1922. I'll try safemode, it it does what I think it does, it seems well worth the money.
Q: Anyone know how to make "XDA QuickMenu" start before Sense, that could potentially get me out af problemsituations as well (as QuickMenu, gives access to taskmanager, filemanager etc)
I had this problem a few times and traced it to SRS WOW. Specifically, SRS was installed, then the new SRS WOW control panel applet was opened before device was reset, it would hang at the same screen.
No idea if this is a possibility for you, just thought I'd suggest it.
hicks said:
I had this problem a few times and traced it to SRS WOW. Specifically, SRS was installed, then the new SRS WOW control panel applet was opened before device was reset, it would hang at the same screen.
Click to expand...
Click to collapse
tnx! I indeed have SRS WOW installed. I remember there something special with this app, where after install a reset is mandatory before starting the app. Since I use Tom's autoinstall which ends with a reset this shouldn't be a problem. I'll try uninstalling it and see. Then again, this app has been running a long time on many different ROMs without a problem. Wouldn't do the author right to blame this app
Solution related to Document Tab?
Someone considered the beta Document Tab to be the principal cause of Manila freezing and I quite agree. I'm using Artemis ROM since 2 days ago (WM 6.5.5 and Sense 2.5.1922) disabling Document index service and it seems to work ok.
Try to disable it by changing register value at:
HKLM/Software/HTC/Manila/HTCService/DocIndexerService
It's a String containing the DLL's name: turn it to something else (or blank value) and that should make the trick. I repeat: 48 hours without freezing and doing some Soft Resets just to try.
Hope to be of help.
I had with different roms/manila version this "freezign effect. Normlay after installing "my" software, so after a clean hard rest it was no problem.
So far I always solved it by using sk-tools and rearranging the booting order in the startup folder.
I put htc sense startup normaly at the very end of the booting chain.
This is certainly possible with QuickMenue as well.
In the meantime Iknow which applications are putting something in the startup folder and after installation of those programms I am changing it mit sk tools and do not wait till a reboot and run into trouble.
Best regards,
dingolino
dXsL said:
Hard reset did not solve it either. Hard reset gave the exact same problem.
Tried WM 6.5.3 and 6.5.5, both with sense 1922. I'll try safemode, it it does what I think it does, it seems well worth the money.
Q: Anyone know how to make "XDA QuickMenu" start before Sense, that could potentially get me out af problemsituations as well (as QuickMenu, gives access to taskmanager, filemanager etc)
Click to expand...
Click to collapse
dingolino said:
So far I always solved it by using sk-tools and rearranging the booting order in the startup folder.
Click to expand...
Click to collapse
tnx! read about sktools, but didn't know exactly what it could do for me. For others: http://s-k-tools.com/index.html?sktools/m_feat.html
I've got enough help for now. "safemode" and "SKtools" definitely helping.
tnx everyone